1/90 · 12.1-inch color display User-friendly screen configuration, including menu screens for graphic drawing and program creation, alarm recovery screens,

N

allet

ctively

onv.)

em

er),

ide)

ide)

1/90)

dhe

m and

visory

apply

er.0906

TC-32BN_英文_5/19-TS 09.5.19 7:44 PM ページ 16

QTTC-32BNEquipped with QT table （with two-face pallet changer）

FTTC-32BNEquipped with fixed table

Machining examples achieving high speed and high quality

Correspondence to production systems and various request

Suggestion of flexible production method

Options for further customer satisfactionOptions

Capabilities

The TC-32BN, our most powerful flagship machine, has been developed by concentrating the essence of Tapping Center technologies. In addition to high productivity and a wide machining area, this machine features the largest magazine capacity among TC models, responding to wider fields of machining, including automotive parts machining. Shattering the #30 stereotype, the #30 spindle machine moves to a new stage.

Latest #30 Spindle Machine that Breaks the Stereotype and Reaches the Ultimate Level in Fast, High-Quality Machining

Expansion of target workpieces 1

Enhanced productivity2

Improved reliability

3

Improved operability4

Machiningcapabilities

Newsuggestions

Four mainfeatures

21

CNC TAPPING CENTER TC-32B N

ドキュメント2 09.6.3 3:26 PM ページ 1

※2 Time taken from start of ATC after the spindle speed reaches 16,000 min-1 until the spindle speed returns to 16,000 min-1 (from the table center for XY)

As the spindle motor used maintains high torque until the spindle reaches the maximum speed, the time taken for the spindle to start and stop is amazingly short, achieving an extremely fast ATC cycle that cannot be expressed by C-C.

0.9S

2.0S

Tool to Tool（T-T）

Chip to Chip（C-C）

Specifications achieving high productivity

Real speed not expressed by C-C

The fastest rapid traverse rate among TC models and high acceleration has greatly reduced non-cutting time, leading to high productivity.

Spindle acceleration/deceleration, spindle orientation, and ATC are completely improved to achieve the ultimate speed.

Faster acceleration Shortest ATC time

※1

※1 Measured in compliance with MAS.

70m/mim

1.2G

0.9G

1.5G

Rapid traverse rate

X-axis time constant

Y-axis time constant

Z-axis time constant

2.1S16,000min-1 Tool change time ※2

TC-32BN16,000

Time（sec）

Other equivalent models

Spindlespeed（min-1）

In addition to the conventional 26-tool magazine, a 40-tool magazine that features the largest tool storage capacity among TC models is also available. This enables even one machine to support machining requiring multiple tools, such as multi-face machining, leading to process integration. In addition, tool replacement is not required even for machining of a variety products and frequent setup changes can be avoided. A 40-tool magazine is available to enable a broad array of applications, responding to production site demands.

Uses a large QT table suitable for large workpiece machining or multiple parts machining.

Equipped with a table with a maximum loading capacity of 600 kg where large jigs can be mounted. A low-floor table is also available.

Tool storage capacity

QT

FT

Largest tool storage capacity among TC models

Wide machining area

QT Table

FT Table

200kg（one side）（441lbs） 600kg（1,323lbs）

X-axis 550mm（21.7inch） Y-axis 400mm（15.7inch）

X-axis 600× Y-axis 525mm

X-axis 800× Y-axis 400mm

350mm（13.8inch） 350mm（standard）（13.8inch） 570mm（low）（22.4inch）

QT

FT

QT FT

QTQT

FT FT

X,Y-axis Stroke

Table size

Max.jig height

Maximum loading capacity

Commonness

40pcs/26pcs

（23.6inch）（20.7inch）

（31.5inch）（15.7inch）

43


1 Expansion of target workpieces 2 Enhanced productivity

TC-32BN_英文_5/19-TS 09.5.19 7:45 PM ページ 3

※2 Time taken from start of ATC after the spindle speed reaches 16,000 min-1 until the spindle speed returns to 16,000 min-1 (from the table center for XY)

As the spindle motor used maintains high torque until the spindle reaches the maximum speed, the time taken for the spindle to start and stop is amazingly short, achieving an extremely fast ATC cycle that cannot be expressed by C-C.

0.9S

2.0S

Tool to Tool（T-T）

Chip to Chip（C-C）

Specifications achieving high productivity

Real speed not expressed by C-C

The fastest rapid traverse rate among TC models and high acceleration has greatly reduced non-cutting time, leading to high productivity.

Spindle acceleration/deceleration, spindle orientation, and ATC are completely improved to achieve the ultimate speed.

Faster acceleration Shortest ATC time

※1

※1 Measured in compliance with MAS.

70m/mim

1.2G

0.9G

1.5G

Rapid traverse rate

X-axis time constant

Y-axis time constant

Z-axis time constant

2.1S16,000min-1 Tool change time ※2

TC-32BN16,000

Time（sec）

Other equivalent models

Spindlespeed（min-1）

res bles ulti-t is ges y of

ple

ere

s）

h）

4


2 Enhanced productivity

TC-32BN_英文_5/19-TS 09.5.19 7:45 PM ページ 4

12.1-inch color displayUser-friendly screen configuration, including menu screens for graphic drawing and program creation, alarm recovery screens, etc.

USB memory interfaceUSB memory interface is available. Many data can be transferred at high speed.Tape operation is also possible from a UBS memory device.Note: USB memory interface cannot be connected directly to the personal computer.

Built-in PLCThe PLC system is built into the NC and can be used to control jigs and operation programs for peripheral equipment.

Maintenance notice functionMaintenance timing can be set or notified by an alarm.

Additional axes control

A tilt index table can be installed to each pallet.

Optional OptionalHigh accuracy mode A

High accuracy mode A ensures accurate finishing of minute lines. Vibration control prevents the vibration generated during axis movement. (The figure on the above shows an example when machined at F10,000 mm/min (F394 inch/min)).

High accuracy mode A OFF

High accuracy mode A ON

The machine is equipped with the B00 series NC and 12.1 inch color display, as well as various useful functions, including menu programming and USB interface, to improve operability. Functions unique to Tapping Centers of electro-mechanical integrated design are further enhanced, such as G and M codes to reduce machining time by even 0.1 s.

●Input/output points　Max. 64/64 points（extended 32/32 points each）●No. of steps　7680（This varies depending on the command, for example,2 steps for LD commandand 3 steps for timer command.）

The machining area is separated from the tool stocker by a shutter door to prevent machine problems and make maintenance easier.

Separation of machining area from tool stocker

The machining area is separated from the machine room with an armor cover to prevent chips entering the machine room, leading to improved reliability.

Armor cover

Chip shower at partition Coolant flows from the top of the partition. Washing the partition and the table prevents chips accumulating.

Chip shower on magazine sideChips on the magazine side are discharged efficiently.

Center trough structureA center trough structure is used for the section under the table. Chips are reliably handled through the base with a maximum tilt angle of 30 degrees.

Measures for chips utilizing accumulated Brother's expertise

Chip shower pumpFlow rate is increased to prevent accumulation of chips.

65


3 Improved reliability 4 Improved operability

TC-32BN_英文_5/19-TS 09.5.19 7:45 PM ページ 5

12.1-inch color displayUser-friendly screen configuration, including menu screens for graphic drawing and program creation, alarm recovery screens, etc.

USB memory interfaceUSB memory interface is available. Many data can be transferred at high speed.Tape operation is also possible from a UBS memory device.Note: USB memory interface cannot be connected directly to the personal computer.

Built-in PLCThe PLC system is built into the NC and can be used to control jigs and operation programs for peripheral equipment.

Maintenance notice functionMaintenance timing can be set or notified by an alarm.

Additional axes control

A tilt index table can be installed to each pallet.

Optional OptionalHigh accuracy mode A

High accuracy mode A ensures accurate finishing of minute lines. Vibration control prevents the vibration generated during axis movement. (The figure on the above shows an example when machined at F10,000 mm/min (F394 inch/min)).

High accuracy mode A OFF

High accuracy mode A ON

The machine is equipped with the B00 series NC and 12.1 inch color display, as well as various useful functions, including menu programming and USB interface, to improve operability. Functions unique to Tapping Centers of electro-mechanical integrated design are further enhanced, such as G and M codes to reduce machining time by even 0.1 s.

●Input/output points　Max. 64/64 points（extended 32/32 points each）●No. of steps　7680（This varies depending on the command, for example,2 steps for LD commandand 3 steps for timer command.）

de

6


4 Improved operability

TC-32BN_英文_5/19-TS 09.5.19 7:45 PM ページ 6

Compensation for heat expansion is performed by estimating the amount of distortion from the motion of each axis. Machining time is not affected as no sensor is used. This system is standard equipped for the Z axis, in addition to X and Y axes.

A high-accuracy encoder is used for the feed axis motor to further improve machining quality.

Functions to achieve high-accuracy machining

■Automatic heat expansion compensation system ■High-accuracy encoder

TC-32BN

OFF

ON

0

Solut ion works

Cylinder Head Cover

CVT Cover

AT transaxle Housing

EPS Housing

Alternator

Throttle Body

Cylinder Block

ABS Block

Automobile Motor cycle

General machine

■Rough cutting○Cutting amount:1800cm3/min■Finishing○Surface roughness:0.17μmRa○Workpiece material:A2017

Hea

t exp

ansi

on

Machining time

Previous machine

Facing1 2

3 4

5 6

7 8

（Use Coolant-Through-Spindle）（Use D125 Facemill）

Tapping

○Material：ADC○M27×3.0 (1-8UNC)

○Material：Carbon steel○M20×2.5 (3/4-10UNC)

○Material：Cast iron○M27×3.0 (1-8UNC)

DATA DATA

DATA

DATA DATA

DATA DATA

DATA

○ D2 × 100mm（A2017）○ D6 × 180mm（A2017）　○ D6 × 120mm（S45C）　　

○Cutting amount:450cm3/min○Workpiece material:A2017

○Cutting amount:480cm3/min○Workpiece material:A2017

（Use D16 endmill）

Endmill (side face)

Deep drilling

Endmill (groove)

○Roundness: 1.2μm

（Use D34 boring bar）

○Workpiece material: A2017

Boring Continuous tapping

○26.8 s / consecutive 30 holes○M8×P1.25　Depth16mm

○PT3/4 14 tapered tapping○Workpiece material:

○Use High accuracy mode A

3D machining Tapping for pipes

Machining capability

Above machine capacity and accuracy may not be obtained depending on tools, holder, shape of workpieces, etc.

Machiningcapabilities

87 87


Machining examples achieving high speed and high quality

○Material：Carbon steel○116:40×6.0×484　(7.1:1.57×0.24×19.1)

○Material：Cast iron○160:40×7.0×573　(9.8:1.57×0.28×22.6)

○Material：ADC　○1,440:100×4.8×3,000　(87.9:3.94×0.19×118.1)

Note) The maximum data is Brother's actual achievement. The other data is guaranteed performance.

○Material：ADC　○D34×0.2 (D1.34×0.008)

○Material：Carbon steel○D25×0.1 (D0.98×0.004)

○Material：Cast iron○D28×0.15 (D1.1×0.006)

Drilling Facing

Tool diameter mm(inch)× Feed mm/rev(inch/rev)

Tool diameter mm(inch)× Pitch mm(inch)

Cutting amount cm3/min(inch3/min)Cuttng width mm(inch)× Cutting depth mm(inch)× Feed rate mm/min(inch/min)

TC-32BN_英文_5/22-TS 09.5.22 3:04 PM ページ 7

Compensation for heat expansion is performed by estimating the amount of distortion from the motion of each axis. Machining time is not affected as no sensor is used. This system is standard equipped for the Z axis, in addition to X and Y axes.

A high-accuracy encoder is used for the feed axis motor to further improve machining quality.

Functions to achieve high-accuracy machining

■Automatic heat expansion compensation system ■High-accuracy encoder

TC-32BN

OFF

ON

0

Solut ion works

Cylinder Head Cover

CVT Cover

AT transaxle Housing

EPS Housing

Alternator

Throttle Body

Cylinder Block

ABS Block

Automobile Motor cycle

General machine

Hea

t exp

ansi

on

Machining time

Previous machine

etc.

88


el

.1)

.6)

008.1)

nce.

TC-32BN_英文_5/19-TS 09.5.19 7:46 PM ページ 8

Improvement in productivityAdvantage 1

Reduction of equipment costAdvantage 2

Reduction of riskAdvantage 3

Applicable to variation in production volume (increase in production) by minimum addition.

Influence is minimized even if a problem occurs in a machine.

STOP!

We suggest a new production method called “One Machine Cell” that fully utilizes the large quick turn table and 40-tool magazine (main features of TC-32BNQT). The One Machine Cell is one of our process integration concepts. For example, when production is performed using two processes, one machine handles these processes by attaching the jig in process 1 to pallet 1 and the jig in process 2 to pallet 2.

[E.g.] When two processes are usedOne Machine Cell

STOP!

Cycle time

90sCycle time

120s

Ideal process balance improves operability.

※ "One Machine Cell" is an original Brother term. This name was created because one machine can handle machining cells where robots or rotors are used.

Production stopped

Process 1 Process 2

Process 1 Process 2

Process 1

Process 2

※Suggestion of One Machine Cell by TC-32BNQT

Jig 1 Jig 2

18 tools 20 tools

Pallet 2

Jig 1

Jig 2

Pallet 1

38 tools

Process 1

Process 2

Process 1 Process 2

Workpiecesproduced:

720 pcs./day

Workpiecesproduced:

822 pcs./day

120 seconds taken to produce one workpiece

Depends on the longest

cycle time

Cycle time

120s

Cycle time

90s

Process 1

Process 2

Cycle time(90s + 120s) / 2 machines


Improvement inoperability

[E.g.] To increase production by 500 pcs./day

Process 1 Process 2

Process 1 Process 2

1000 pcs./day

500 pcs./day

Two additional machines are

needed.

Process 1

Process 2

Process 1

Process 2

500 pcs./day

500 pcs./day

500 pcs./day

Possible by additionof one machine

Production continues with

the other machine.

Machining exampleMultiple partsmachining

Features specifications suitable for multiple parts machining or multi-face machining.

Ethernet compatible

The shape of covers around the magazine and the column has been reviewed to reduce MTTR (mean time to repair) by 50% when compared to conventional models.

Consideration for maintenance

In stead of polyvinyl chloride resin, non-halogen resin is used for windows on doors. A power regenerating converter is used to lower power consumption. A high-efficiency spindle motor and an automatic power off function are also used to save energy.

Consideration for environment

Index table

QT

FT Features specifications suitable for large workpiece machining or 5-face machining using a tilt index table. Easily incorporated in your automation line.

Machining example

Machining example Machining example

Multiple parts machining for four same workpieces Multi-face machining for large workpiece using index table

Multi-face machining for large workpieces using index table 5-face machining using tilt index table

620（24.4） 620（24.4）

570（22.4）

570（22.4）

Jig area Jig area

400（15.7）

400（15.7）

D500(D19.7)

500（19.7） 150（5.9）

300（11.8）

400（15.7）

550（21.7）

1200（47.2） 1200（47.2）

Ф150（D5.9）

Ф150（D5.9）

400（15.7）

100（

3.9）

100（

3.9）

D1200

（D47.2） D1

200

（D47.2）

X-axis stroke550（21.7）

X-axis stroke

Y-axis stroke

400（15.7）

Y-axis stroke

mm（inch） mm（inch）

Multi-facemachining

Indextable

Indextable550（21.7）

X-axis stroke550（21.7）

X-axis stroke

Y-axisstroke

Y-axisstroke

450（17.7）

120 （4.7）

120 （4.7）

Large workpiecemachining

5-facemachining

mm (inch) mm (inch)

Ethernet interface is standardequipped for externalcommunication.

109


NewsuggestionsCapabilities Suggestion of flexible production methodCorrespondence to production systems and various request

TC-32BN_英文_5/22-TS 09.5.22 3:05 PM ページ 9

Improvement in productivityAdvantage 1

Reduction of equipment costAdvantage 2

Reduction of riskAdvantage 3

Applicable to variation in production volume (increase in production) by minimum addition.

Influence is minimized even if a problem occurs in a machine.

STOP!

We suggest a new production method called “One Machine Cell” that fully utilizes the large quick turn table and 40-tool magazine (main features of TC-32BNQT). The One Machine Cell is one of our process integration concepts. For example, when production is performed using two processes, one machine handles these processes by attaching the jig in process 1 to pallet 1 and the jig in process 2 to pallet 2.

[E.g.] When two processes are usedOne Machine Cell

STOP!

Cycle time

90sCycle time

120s

Ideal process balance improves operability.

※ "One Machine Cell" is an original Brother term. This name was created because one machine can handle machining cells where robots or rotors are used.

Production stopped

Process 1 Process 2

Process 1 Process 2

Process 1

Process 2

※Suggestion of One Machine Cell by TC-32BNQT

Jig 1 Jig 2

18 tools 20 tools

Pallet 2

Jig 1

Jig 2

Pallet 1

38 tools

Process 1

Process 2

Process 1 Process 2

Workpiecesproduced:

720 pcs./day

Workpiecesproduced:

822 pcs./day


Depends on the longest

cycle time

Cycle time

120s

Cycle time

90s

Process 1

Process 2

Cycle time(90s + 120s) / 2 machines


Improvement inoperability

[E.g.] To increase production by 500 pcs./day

Process 1 Process 2

Process 1 Process 2

1000 pcs./day

500 pcs./day

Two additional machines are

needed.

Process 1

Process 2

Process 1

Process 2

500 pcs./day

500 pcs./day

500 pcs./day

Possible by additionof one machine

Production continues with

the other machine.

sin ng A

wer

le

h）

)

10


Newsuggestions Suggestion of flexible production method

TC-32BN_英文_5/19-TS 09.5.19 7:46 PM ページ 10

Top cover

RS-232CSwitch panelSwitches of peripheral equipment can be attached.

Outer index switch（QT Only）

Index operation is possible for the pallet on the workpiece change side, making changing the workpiece easier.

A 25-pin connector can be used. (A 9-pin connector is standard equipped.)

B-axis connection unitMulti-face machining is enabled by adding additional axes.

Rotary joint（QT Only）

There are 6 ports for the PT 1/8 lubrication port.

Top coverPrevents mist getting out of the machine from the ceiling of the machining room. A hole for a mist collector is provided.

Regularly greases the greasing points on the three axes.

Exchanging workpieces is easy to do.Lights with a built-in inverter are used to extend life.

Working in machining room is easy to do.Lights with a built-in inverter are used to extend life.

Automatic lubricator Work lightTable light（QT Only）

Standard

programs

Mbytes memory

Mbytes memory

Optional

LED lamps are used, so there will be no blown lamps, requiring no maintenance.

Indicator light (1, 2, or 3 lamps)Memory can be expanded up to 120 Mbytes. Expansion memory up to 120 M

Employs ladder language programming (same as commercially available PLC). Ladder programs can be edited or monitored on the NC screen or commercially available PCs.

Built-in PLC

Chip conveyor (hinge + scraper)

Chip conveyor (scraper)

Coolant tank with chute

Workpiece materials

■Selection list (Standard)

Aluminum cast Aluminum die cast Aluminum alloy Steel

●

●

●

●

●

●

● ●※1 ※1 ※3

※2

※2※4

Chip conveyor Coolant tank with chute

Hinge ＋ Scraper type Scraper type

Two types of chip conveyors are available: hinge + scraper type and scraper type. An oil skimmer can also be added to collect lubricant.

Oil skimmer

Chips are discharged smoothly with jets of coolant. The chute can be detached from the coolant tank for easier maintenance.

The tool breakage detector

is located inside the tool

magazine to eliminate any

effect on the cycle time.

The detection position is

automatically set according

to the tool length.

(80 to 200 mm

(3.1 to 7.9 inch))

Tool breakage detector7.0 MPa high-pressure coolant unit

Coolant is showered from

the end face of the

spindle when changing

the tool, preventing chips

sticking to the tapered

section of the spindle,

leading to improved ATC

repeatability. By BT spindle, this low noise high-pressure unit enables machining using the

max. 7 MPa CTS (Coolant Through Spindle). The pressure unit's back wash

system prevents filters clogging, enabling long continuous use.

Tool washing

Manual pulse generator with a cable makes operation through the maintenance window easier.

Manual pulse generatorAssists cleaning of machined workpieces and chips inside the machine.

Cleaning gunSpindle overrideSpindle speed can be changed without changing the program.

11 12


Options for further customer satisfactionOptions

Coolant system Selection of three types depending on the application

※1　Frequent cleaning is required for small aluminum chips.　※2　Not applicable for long chips (50 mm or longer)　※3　Chip conveyor with magnet is required for cast iron.※4　Not suitable for large amount of chips.　●Please contact Brother for details.

＊Chip box is necessary, when using chip conveyor.　PLease arrange this box at your side.

TC-32BN_英文_5/19-TS 09.5.19 7:46 PM ページ 11

Top cover

RS-232CSwitch panelSwitches of peripheral equipment can be attached.

Outer index switch（QT Only）

Index operation is possible for the pallet on the workpiece change side, making changing the workpiece easier.

A 25-pin connector can be used. (A 9-pin connector is standard equipped.)

B-axis connection unitMulti-face machining is enabled by adding additional axes.

Rotary joint（QT Only）

There are 6 ports for the PT 1/8 lubrication port.

Top coverPrevents mist getting out of the machine from the ceiling of the machining room. A hole for a mist collector is provided.

Regularly greases the greasing points on the three axes.

Exchanging workpieces is easy to do.Lights with a built-in inverter are used to extend life.

Working in machining room is easy to do.Lights with a built-in inverter are used to extend life.

Automatic lubricator Work lightTable light（QT Only）

Standard

programs

Mbytes memory

Mbytes memory

Optional

LED lamps are used, so there will be no blown lamps, requiring no maintenance.

Indicator light (1, 2, or 3 lamps)Memory can be expanded up to 120 Mbytes. Expansion memory up to 120 M

Employs ladder language programming (same as commercially available PLC). Ladder programs can be edited or monitored on the NC screen or commercially available PCs.

Built-in PLC

of e

ctor

tool

any

me.

n is

ding

rom

the

ging

hips

red

dle,

ATC

Manual pulse generator with a cable makes operation through the maintenance window easier.

Manual pulse generatorAssists cleaning of machined workpieces and chips inside the machine.

Cleaning gunSpindle overrideSpindle speed can be changed without changing the program.

12


on

TC-32BN_英文_5/19-TS 09.5.19 7:47 PM ページ 12

712（

28.0）

889（

35.0）

534（21.0）

1958（77.1） 2557（100.7）

12（

0.47

） H8

3.7（0.10）

80（3.1）

100（3.9）

550（

21.7）

400（15.7）

800（

31.5）

32－Ｍ10×1.5

400（

15.7）（Hinge）

1197（

47.1）

3103（122.2）

1890（

74.4）

1055（

41.5）

534（21.0）

1958（77.1） 2556（100.6）

267（10.5）

1457（57.4） 834（32.8）

1114（

43.9）

670

（26

.4）

1132（

44.6）

2500（

98.4）

771（

30.4）（

stand

ard）

551（

21.7）（low）

771（

30.4）（

stand

ard）

551（

21.7）（low）

1890（74.4） 673

（26.5） 480

（18.9） 737

（29.0）

1890（74.4） 673

（26.5） 480

（18.9） 737

（29.0）

64（2.5）

210（8.3）

1420（55.9） 260（10.2）

1600（63.0）

130～

140

（5.

1～5.

5）

445（17.5）

3560（140.2）（Scraper type） 3580（140.9）（Hinge + Scraper type）

12（

0.47

） H8

550（

21.7）

400（15.7）

800（

31.5）

32－Ｍ10×1.5

mm（inch）

32BNFT

1197（

47.1）

3103（122.2）

1890（

74.4）

1055（

41.5）

65（2.6）

3259（128.3）

670

（26

.4）

1132（

44.6）

2500（

98.4）

210（8.3）

1420（55.9） 260（10.2）

1600（63.0）

130～

140

（5.

1～5.

5）

267（10.5）

1457（57.4） 834（32.8）

1114（

43.9）

445（17.5）

100

（3.9）10

0（

3.9）10

0（

3.9）

80 （3.1）

3.7（0.10）

80（3.1）

100（3.9）

425

425

32BNQT

12（

0.47

） H8

5（0.20）

D1200（D47.2）

48―M10P1.5×15

80（

3.1）

100

（ 3.9）

100

（ 3.9）

100（3.9）

160（6.3）

100（3.9）

120（4.7）

525（20.7）

100.5（4.0）

400（15.7）

550（

21.7）

600（

23.6）

6（0.24）300（11.8）300（11.8）

6（0.

24）

1197（

47.1）

1730（

68.1）

1055（

41.5）

57.5（

2.3）

105（

4.1）

407（

16.0）

80°

3669（144.4）

400（

15.7）（Hinge）

502（

19.8）（Scraper type）

800（

31.5）（Hinge + Scraper type）

（wi

dth

of c

hip b

ox）

710（28.0）

1679（66.1） 834（32.8） 604（23.8）

1244（

49.0）（minimum）

1890（74.4） 377

（14.8） 791

（31.1）722

（28.4）

(46（1.8）)13

0～14

0（

5.1～

5.5）　

771（

30.4）

77

2（30

.4）

1030

（40

.6）

　 350

（13

.8）

2500（

98.4）

1420（55.9） 260（10.2）

210（8.3）

1600（63.0）

Ind

icat

or li

ght：

Op

tiona

l29

0（11

.4）（

3 la

mp

s ty

pe）

249（

9.8）（

2 la

mp

s ty

pe）

208（

8.2）（

1 la

mp

typ

e）

3117（122.7）

59（2.3）

2524（99.4） 534（21.0）

3921（154.3）（Scraper type）3941（155.2）（Hinge + Scraper type）

610（

24.0）

1285（


1515（


（H

eigh

t of c

hip

box）

D1200（D47.2）

48―M10P1.5×15

80 （ 3.1）

100

（ 3.9）

100

（ 3.9）

100（3.9）

160（6.3）

100（3.9）

120（4.7）

525（20.7）

100.5（4.0）

400（15.7）

550（

21.7）

600（

23.6）

6（0.24） 300（11.8）300（11.8）

6（0.

24）

12（

0.47

） H8

5（0.20）

1197（

47.1）

80°

712

（28

.0）

1730（

68.1）

1055（

41.5）

57.5（

2.3）

105（

4.1）

407（

16.0）

3669（144.4）

710（28.0）

1679（66.1） 834（32.8） 604（23.8）

1244（

49.0）（minimum）

1890（74.4） 377

（14.8） 791

（31.1）722

（28.4）

（46（1.8））

Ind

icat

or li

ght：

Op

tiona

l29

0（11

.4）（

3 la

mp

s ty

pe）

249（

9.8）（

2 la

mp

s ty

pe）

208（

8.2）（

1 la

mp

typ

e）

　　

130～

140

（5.

1～5.

5） 77

1（30

.4）

77

2（30

.4）

1030

（40

.6）

350

（13

.8）

2500（

98.4）

1420（55.9） 260（10.2）

210（8.3）

1600（63.0） 3758（148.0）

889（

35.0）

3117（122.7）

59（2.3）

2524（99.4） 534（21.0）

●Please leave 700 mm (27.6) between machines for the maintenance.

Chip conveyor type

Coolant unit with shute type

Chip conveyor type


100

（3.9）10

0（

3.9）10

0（

3.9）

80 （3.1）

Ind

icat

or li

ght：

Op

tiona

l29

0（11

.4）（

3 la

mp

s ty

pe）

249（

9.8）（

2 la

mp

s ty

pe）

208（

8.2）（

1 la

mp

typ

e）

Ind

icat

or li

ght：

Op

tiona

l29

0（11

.4）（

3 la

mp

s ty

pe）

249（

9.8）（

2 la

mp

s ty

pe）

208（

8.2）（

1 la

mp

typ

e）

1285（


1515（


（H

eigh

t of c

hip

box）

610（

24.0）

502（


800（


mm（inch）●Please leave 700 mm (27.6) between machines for the maintenance.

1413


Externaldimensions

TC-32BN_英文_5/19-TS 09.5.19 7:47 PM ページ 13

712（

28.0）

889（

35.0）

534（21.0）

1958（77.1） 2557（100.7）

12（

0.47

） H8

3.7（0.10）

80（3.1）

100（3.9）

550（

21.7）

400（15.7）

800（

31.5）

32－Ｍ10×1.5

400（

15.7）（Hinge）

1197（

47.1）

3103（122.2）

1890（

74.4）

1055（

41.5）

534（21.0）

1958（77.1） 2556（100.6）

267（10.5）

1457（57.4） 834（32.8）

1114（

43.9）

670

（26

.4）

1132（

44.6）

2500（

98.4）

771（

30.4）（

stand

ard）

551（

21.7）（low）

771（

30.4）（

stand

ard）

551（

21.7）（low）

1890（74.4） 673

（26.5） 480

（18.9） 737

（29.0）

1890（74.4） 673

（26.5） 480

（18.9） 737

（29.0）

64（2.5）

210（8.3）

1420（55.9） 260（10.2）

1600（63.0）

130～

140

（5.

1～5.

5）

445（17.5）

3560（140.2）（Scraper type） 3580（140.9）（Hinge + Scraper type）

12（

0.47

） H8

550（

21.7）

400（15.7）

800（

31.5）

32－Ｍ10×1.5

nch）

32BNFT

1197（

47.1）

3103（122.2）

1890（

74.4）

1055（

41.5）

65（2.6）

3259（128.3）

670

（26

.4）

1132（

44.6）

2500（

98.4）

210（8.3）

1420（55.9） 260（10.2）

1600（63.0）

130～

140

（5.

1～5.

5）

267（10.5）

1457（57.4） 834（32.8）

1114（

43.9）

445（17.5）

100

（3.9）10

0（

3.9）10

0（

3.9）

80 （3.1）

3.7（0.10）

80（3.1）

100（3.9）

1197（

47.1）

800（


p12

85（


1515（


Chip conveyor type


100

（3.9）10

0（

3.9）10

0（

3.9）

80 （3.1）

Ind

icat

or li

ght：

Op

tiona

l29

0（11

.4）（

3 la

mp

s ty

pe）

249（

9.8）（

2 la

mp

s ty

pe）

208（

8.2）（

1 la

mp

typ

e）

Ind

icat

or li

ght：

Op

tiona

l29

0（11

.4）（

3 la

mp

s ty

pe）

249（

9.8）（

2 la

mp

s ty

pe）

208（

8.2）（

1 la

mp

typ

e）

1285（


1515（


（H

eigh

t of c

hip

box）

610（

24.0）

502（


800（


mm（inch）●Please leave 700 mm (27.6) between machines for the maintenance.

14


TC-32BN_英文_5/19-TS 09.5.19 7:47 PM ページ 14

N

■Machine specifications

※1 When all tools are small tools (D55mm or less).　※2 The tool storage capacity, tool change time, etc., will vary when using large tools. The tool change time varies depending on the spindle type.　※3 Actual tool weight varies according to the configuration and center of gravity; The figures shown here are for reference only.　※4 Spindle motor output differs depending on the spindle speed.　※5 These include 0.9 KVA for chip conveyor and 4.2 KVA for high-pressure coolant.　※6 The required flow rate listed is the total flow rate when using the spindle air blast and coolant valve. 　※7 Measured in compliance with JIS B6201-1989 and Brother shipping standards. Please contact Brother details of this matter.　※8 Brother spec. is applied to pull stud for CTS.　※9 Please contact Brother for details of HSK and NC5 types.　※10 This is value of BT spec.

※Quick turn table is a turntable type 2-face pallet changer

12,000min-1specifications 16,000min-1specifications 12,000min-1specifications 16,000min-1specificationsTC-32BN QT TC-32BN FT

X axis

Y axis

Z axis

Distance between table top and spindle nose end

Work area size

Maximum loading capacity (uniform load)

Spindle speed

Speed during tapping

Tapered hole

Rapid traverse rate X x Y x Z axes

Cutting feed rate

Tool shank type

Pull stud type

Tool storage capacity

Max. tool lengeth

Max. tool diameter

Max. tool weight

Tool selection

Tool to Tool

Chip to Chip

Main spindle motor (10min./continuous)

Feed spindle motor

Power supply

Power capacity (max.)

Machine height

Required floor space (with control unit door opened)

Machine weight (including control unit and splash guard)

Positioning accuracy

Repeatability

※2

※3

CNC-B00

550 (21.7)

400 (15.7)

415 (16.3)

MAX. 8,000

7 / 24 tapered #30

70 x 70 x 70 (2.756 x 2.756 x 2.756)

1 - 20,000 (0.04 - 787)

MAS-BT30

MAS-PT30T-2

26 (＋1) / 40 (＋1)

200 (7.9)

0-30 (0-1.2)/ D46 (1.8) 30-200 (1.2-7.9)/ D55 (2.2) (Max.tool diameter D125 (4.9))

3.5 (7.7)<total weight: 55 (121.2)/26><total weight: 80 (176.3)/40>

Double arm method random closest path

0.9

2.0

1.3 (X,Y,Z)

AC 3Φ、 50 / 60Hz±1Hz

0.4 - 0.6

120 (at atmospheric pressure)

2,360 (92.9)

0.005 / 300 (0.0002 / 11.8)

±0.003 (±0.00012)

11/6 10/7.3 11/6 10/7.3

16 (MAX. 32) 18 (MAX. 37)16 (MAX. 32） 18 (MAX. 37)

※10

※9

※9

※9

※10

※6

※5

※7

12～12,000 16～16,000 12～12,000 16～16,000

※1

※8

1 operating manual, 4 anchor bolts, 4 leveling plates,1 splash guard with manual door, 1 set of fuses.

645 (25.4)

600 x 425 (23.6 x 16.7) <one side>

200 (441) <one side>

(standard)645 (25.4)、(low)865 (34.1)

800×400 (31.5 x 15.7)

600 (1,323)

1,890 (74.4)×3,669 (144.4）

4,600 (10,143)

1,890×3,103 (74.4 x 122.2)

4,400 (9,702)

※4 ■Quick turn table specifications

ItemModel

Travels

Standard accessories

Table

Spindle

Feed rate

ATC unit

Toolchange time

Electricmotors

Powersource

Machinedimensions

Accuracy

Working air pressure

Required flowAir supply

※Functions with (NC) and (conv.) are available only for NC language programming and conversational programming respectively

■ NC Unit specifications

CNC-B00

7 axes (X, Y, Z, 4 additional axes)

　　　　　　　　5 axes (X, Y, Z, A, B)

　　　　　　　　Linear : 4 axes (X, Y, Z, one additional axis) Circular : 2 axes　　　　　　　　Helical / conical interpolation : 3 axes (X, Y, Z)

0.001mm, 0.0001inch, 0.001deg.

±9999.999mm (±999.9999inch)

●Absolute / incremental●Inch / metric●Corner C / Corner R●Coordinate rotation●Synchronized tap●Coordinate system setting●Dry run●Restart●Backlash compensation●Pitch error compensation●Rapid traverse override●Cutting feed override

●Alarm history●Status log●Machine lock●Computer remote●High-accuracy mode A●Tool length measurement●Tool life management / spare tool●Background editing●Graphic display●Subprogram●Expansion workpiece coordinate system (NC)●Helical / conical interpolation

●Scaling(NC)●Mirror image(NC)●Menu programming(NC)●Program compensation input(NC)●Tool length compensation(NC)●Tool diameter compensation(NC)●Operation program(conv.)●Schedule program(conv.)●Automatic tool selection(conv.)●Automatic cutting condition setting (conv.)●Automatic tool length compensation setting (conv.) ●Automatic tool diameter compensation setting (conv.)

●Automatic calculation of unknown number input (conv.)●Machining order control (conv.)●Macro function (system variables) (NC)●Automatic power off●Servomotor off standby mode●Chip shower off delay●Automatic coolant off●Automatic work light off●Local coordinate system (NC)●One-way positioning (NC)●Operation in tape mode (NC)●Automatic heat expansion compensation system

12.1-inch color LCD display

Approx. 5,000 m (Approx. 2 Mbytes)

USB Interface, RS232C 1 ch (9 pin) , Ethernet

1,024 programs

NC language, conversation (changed by parameter),

conversion from conversation program to

NC language program available

Interpolation

Positioning

Type

600 x 525 (23.6 x 20.7)(one side)

645 x 425 (25.4 x 16.7)(one side)

mm (inch)Table dimension

350 (13.8)mm (inch)Max. jig height

mm (inch)Table work area size

D1,200 (D47.2)Max. turning diameter mm (inch)

200 (441)(one side)Max. loading capacity kg (lds)

20.4 (one side)Rated table load inertia for turning axis

(kg・m2)

0°/180° turntable system

Table position time 3.4s /180°

Table turning system AC servo motor (750W)HRH gear (total speed reduction ratio:1/90)

mm (inch)Table changerepeatabilty

0.01 (0.0004)(in the X， Y， andZ axes directions 300 from thecenter of rotation)

■Optional

mm(inch)

mm(inch)

mm(inch)

mm(inch)

mm(inch)

kg(lbs)

(min-1)

(min-1)

m/min(inch/min)

mm/min(inch/min)

(pcs)

mm(inch)

mm(inch)

kg(lbs)

(sec)

(sec)

(kW)

(kW)

(kVA)

(MPa)

(L/min)

mm(inch)

mm(inch)

kg(lbs)

mm(inch)

mm(inch)

CNC unit model

CNC model

Controllable axes

Minimum setting unit

Maximum command value

Display

Program capacity

External communication

No. of registerable programs

Program format

NC function

* Please contact your Brother dealer for details.

Windows® is a trademark or registered trademark of MicrosoftCorporation in the United States and / or other countries.

Simultaneously controlled axes

Specifications may be subject to change without any notice.

●Be sure to read the instruction manual and safety manual before using the product safely. If you use oil-based coolant or machine materials that may ignite, such as magnesium and resin, take thorough safety measures to prevent fire. Please contact the sales personnel for any inquiries. ●When exporting this product, carefully check the customer and their purpose of use from the viewpoint of security assurance. You may have to obtain permission from the supervisory

authorities prior to export due to revisions of laws and regulations etc. Please contact Brother before exporting the machine.●When exporting our product with tilting rotary table, "list control" is applicable, according to view of Ministry of Economy, trade and industry(METI) in Japan. Therefore, please apply

for export license in advance of export. If necessary, please contact METI.

The information in this catalogue is current as of June 2009.

Brother Industries, Ltd. Machinery & Solution CompanyKariya plant acquired ISO 9001 and 14001 certifications.

ver.0906

TC-32BN_英文_5/22-TS 09.5.22 3:05 PM ページ 15

Documents

1/90 · 12.1-inch color display User-friendly screen configuration, including menu screens for graphic drawing and program creation, alarm recovery screens,