19-432 Santa Down the Chimney - Pattern Paradisepattern-paradise.com/wp-content/uploads/...Nov 19, 2019 · long enough to go across chimney. Ch1, working along top of icicles, sc

www.pattern-paradise.com [email protected]

This is an original pattern copyrighted by Pattern Paradise, all rights reserved. Please do not sell, print or distribute this pattern in any form. You are welcome to sell products you make from this pattern, as long as you provide a link back to Pattern Paradise. You may not use the images contained in this pattern. We take great care to make sure these instructions are as accurate as possible – if you find any errors please contact us at [email protected]

Size: 12” wide x 24” tall

Materials: • Made with #4 worsted weight yarn, I

used Red Heart Super Saver (364 yards per skein) in Cherry Red, Soft White, Black and Light Grey. I used about ½ skein each of the grey and red and about 100 yards each of the white and black.

• Hook Clover Amour H/5.00 mm • Poly Fil (optional) • Stitch markers (5) • Yarn/Tapestry Needle

Gauge: 14 sc x 14 rows = 4”

Abbreviations (US Terms): BLO: back loop only ch: chain dc: double crochet hdc: half double crochet sc: single crochet sl st: slip stitch st(s): stitch(es)

LFPSt (Long Front Post Stitch): Yarn over 4 times (5 loops on hook), insert in designated stitch, yarn over and pull loop through (6 loops on hook), yarn over and pull through 2 loops 5 times (1 loop on hook). BE SURE TO LEAVE THE STITCH BEHIND THIS STITCH UNWORKED!

19-432 Santa Wall Hanging

©Pattern Paradise All Rights Reserved - 2 - www.Pattern-Paradise.com

Chimney (Front Side): Even rows are front side rows

Row 1: With Grey, ch42, sc in 2nd ch from hook and next 19, ch1 (place stitch marker in ch1 space), skip 1, sc last 20 chs. (40 sc + ch1)

Row 2: Ch1, turn, sc in each sc, sc in ch1 space, sc in each sc to end. (41 sts for remainder of chimney)

Rows 3 to 7: Ch1, turn, sc in each st to end. Fasten off after last repeat.

Row 8: Join Black, ch1, turn, sl st 20, work LFPSt in st with stitch marker, sl st remaining sts to end.

Row 9: Ch1, turn, working in BLO, sl st in each st to end. Fasten off. Place a stitch marker in the 11th stitch from either side.

Row 10: Join grey, turn, working in BLO, sc in each st to end.


Row 18: Join Black, ch1, sl st 10, work LFPSt in st with stitch marker 9 rows below, sl st 19, work LFPSt in st with stitch marker 9 rows below, sl st last 10 sts.

Row 19: Ch1, turn, working in BLO, sl st in each st to end. Fasten off. Place a stitch marker in the 21st stitch.

Row 20: Join Grey, turn, working in BLO, sc in each st to end.


Row 28: Join Black, ch1, turn, sl st 20, work LFPSt in st with stitch marker, sl st remaining sts to end.

Row 29: Ch1, turn, working in BLO, sl st in each st to end. Fasten off. Place a stitch marker in the 11th stitch from either side.

Rows 30 to 38: Repeat Rows 10 to 18 once.

Row 39: Ch1, turn, sc in each st to end.

Rows 40 to 42: Join White, sc in each st to end. Fasten off after last repeat.

Chimney (Back Side): Row 1: With Grey, ch42, sc in 2nd ch from hook and each remaining st to end. (41)

Rows 2 to 36: Ch1, turn, sc in each st to end. (41)

Rows 37 to 39: Join White, sc in each st to end. Fasten off after last repeat.

• Pattern written in US Standard terms. • The ch1 at the beginning of a round DOES NOT count as a stitch. • When a number precedes a stitch, it means to work that number of stitches in the

designated stitch. Example: 2sc, means you will make two single crochets in the designated stitch.

• When a stitch precedes a number, it means make that stitch in the designated number of stitches. Example: sc 2 means you will make a sc in each of the next two stitches.

• Fasten off at color changes. • Stitch count is in ( ) at the end of the row.



Joining Front and Back: With wrong sides together, match stitches along the sides and bottom. Join Grey yarn at the top corner and working through both thicknesses, *sc in each st to corner, 3sc in corner*, repeat between * twice, leaving top open. Fasten off.

Snow/Icicles – work in white: The icicles are totally customizable! They are a series of chains with sc, hdc and dc worked in them. The more chains you start with the longer the snow icicles will be, mine ranged between 5 chains and 11 chains. Feel free to alternate them as you like.

Process: Ch9, sc in 2nd ch from hook and next ch, hdc 3, dc in each ch to end, DO NOT TURN;

Ch7, sc in 2nd ch from hook and next ch, hdc 3, dc in each ch to end, DO NOT TURN;

Ch5, sc in 2nd ch from hook and next ch, hdc to end, DO NOT TURN;

Repeat instructions above until the icicles are long enough to go across chimney. Ch1, working along top of icicles, sc 41 evenly across. Turn icicles so the wrong side is facing you, place across top of chimney front, match stitches and work sc through both thicknesses to join. Fasten off.

Pants – make 2: Row 1: With Red, ch42, sc in 2nd ch from hook and each remaining ch to end. (41)


Mark the outside of the pants: • For front of pants, Row 14 is the outside. • For back of pants, Row 13 is the outside.

Leg 1: Row 15: Ch1, turn, sc 19. (19)

Row 16: Ch1, turn, skip 1 st, sc in each st to end. (18)

Row 17: Ch1, turn, sc in each st until 1 remains, leave last st unworked. (17)

Row 18: Repeat Row 16. (16)




Row 32: Ch1, turn, sc in each st to end. (14)

Row 33: Ch1, turn, skip 1 st, sc 12, leave last st unworked. (12)

Row 34: Ch1, turn, skip first st, sc in each st to end. (11)

Row 35: Ch1, turn, skip 1 st, sc 8, leave last 2 sts unworked. (8)

Row 36: Ch1, turn, skip 1 st, sc to end. (7)



Row 39: Ch1, turn, sc 3, leave last st unworked. (3)

Row 40: Ch1, turn, skip 1 st, sc 2. Fasten off.

Leg 2: Row 15: Skip 2 sts following leg 1 stitches, join in next st, ch1, sc in same st and each st to end. (20)








Rows 29 and 30: Ch1, turn, sc in each st to end. (16)

Row 31: Ch1, turn, 2sc in first st, sc in each st until 1 remains, leave last st unworked. (16)


Row 33: Ch1, turn, sl st in first st (does not count as st), ch1, skip 1 st, sc in each st to end. (13)

Row 34: Ch1, turn, sl st in first st (does not count as st), ch1, skip 1 st, sc 10, leave last st unworked. (10)


Row 36: Ch1, turn, skip 1 st, sc 5, leave last 2 sts unworked. (5)

Row 37: Ch1, turn, sl st in first st (does not count as st), ch1, skip 1 st, sc 2, leave last st unworked. Fasten off.

Boot Cuff – work in white: Row 1: Join at end of pant leg, ch1, sc 11 sts evenly across pant leg. (11)

Row 2: Ch1, turn, 2sc in first st, sc 9, 2sc in last st. (13)


Row 8: Ch1, turn, skip first st, sc 10, skip next st, sc in last st. Fasten off. (11)

Boots – work in black: Because the two legs are not symmetrical, it is important to mark the outside of the pants for

both the back and the front as mentioned earlier. One boot is started from the outside of the pants and the other is started from the inside. To determine right and left side of boots, lay the pants down with outside facing you and legs facing up, the leg on your right is the “right side”, the one on your left is the “left side”. This will be a different leg for front and back, so just take them one at a time.

Boot for “right side”: Row 1: Working from outside of leg, skip first st of cuff, join in next st, ch1, sc 9. (9)

Rows 2 & 3: Ch1, turn, sc in each st to end. (9)

Row 4: Ch1, turn, sc in each st to end, ch5. (9 sc + 5 chs)

Row 5: Turn, sc in 2nd ch from hook and next 3 chs, sc in each st to end. (13)

Row 6: Ch1, turn, sc in each st to end, ch5. (13 sc + 5 chs)

Row 7: Turn, sc in 2nd ch from hook and next 3 chs, sc in each st to end. (17)


Row 12: Ch1, turn, sc 15, skip next st, sc in last st. (16)




Row 14: Ch1, turn, sc 13, skip next st, sc in last st. (14)


Row 16: Ch1, turn, sc 7, leave remaining sts unworked. (7)

Row 17: Ch1, turn, sc in each st to end. Fasten off. (7)

Boot for “left side”: Row 1: Working from inside of leg, skip first st of cuff, join in next st, ch1, sc 9. (9)

Rows 2 to 17: Repeat as for Boot Leg 1.

Finishing: Joining Front and Back: With inside of pants touching, match legs and line up stitches along the sides and bottom. Join Red yarn at the top corner of pants and working through both thicknesses, sc in each st all around to join, changing working color to match the section you are working (red for pants, white for cuff and black for boot).

Lightly stuff the body then whip stitch the top of the pants closed.

Insert the pants into the chimney and sew chimney to pants.

Add a hanging cord to the feet and hang on your door or wall!

.

Documents

19-432 Santa Down the Chimney - Pattern Paradisepattern-paradise.com/wp-content/uploads/...Nov 19, 2019 · long enough to go across chimney. Ch1, working along top of icicles, sc