Embed Size (px)
Citation preview
.205 THRU (3 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
.181 X .205 SLOTTED THRU .205 X .374 SLOTTED THRU (3 PLCS)
4.3125 5.0625 5.8125
.205 X .453 SLOTTED THRU
.2500 1.2500 3.5000
5.1250
.190 THRU .220 THRU (3 PLCS) 82 COUNTERSINK
4.5000
6.7500
.256 X .335 SLOTTED THRU (2 PLCS)82 COUNTERSINK
8" SLIDE TRAVEL 8" SLIDE LENGTH .752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 6/27/18
1SHEET 1 OF 1 NAS 06/27/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-8ZINC PLATED
2250 SERIES8" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB
NS
PN
6/27/18
6/27/18
6/27/18
.205 THRU (3 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
.181 X .205 SLOTTED THRU
.205 X .374 SLOTTED THRU (3 PLCS)
6.2500 7.0000 7.7500
.205 X .453 SLOTTED THRU
10 SLIDE TRAVEL 10 SLIDE LENGTH
.2500 1.2500 3.5000
7.1250
.197 THRU
.255 THRU (3 PLCS)
6.5000
8.7500
.276 X .362 SLOTTED THRU(2 PLCS)
.752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-10-QDZINC PLATED
2250 SERIES10" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB
NS
PN
6/28/18
6/28/18
6/28/18
.205 (3 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
.181 X .205 SLOTTED THRU
8.3125 9.0625 9.8125
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU(3 PLCS)
13 SLIDE TRAVEL 12 SLIDE LENGTH 2.09
.752
.2500 1.2500 3.5000
9.1250
.197 THRU .255 THRU (3 PLCS)
8.5000
10.7500
.276 X .362 SLOTTED THRU(2 PLCS)
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-12-QDZINC PLATED
2250 SERIES12" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB
NS
PN
06/28/18
06/28/18
06/28/18
.205 THRU (3 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
.181 X .205 SLOTTED THRU
10.3125 11.0625 11.8125
.205 X .453 SLOTTED THRU
.205 X .374 SLOTTED THRU3 PLCS
15 SLIDE TRAVEL 14 SLIDE LENGTH
.2500 1.2500 3.5000
11.1250
.197 THRU .255 THRU (3 PLCS)
10.5000
12.7500
.276 X .362 SLOTTED THRU(2 PLCS)
.752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-14-QDZINC PLATED
2250 SERIES14" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB
NS
PN
06/28/18
06/28/18
06/28/18
.205 THRU (3 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
.181 X .205 SLOTTED THRU
11.2500 12.2500 13.0000 13.7500
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU(4 PLCS)
2.09
.752
.2500 1.2500 3.5000
13.1250
.197 THRU
.255 THRU (3 PLCS)
12.5000
14.7500
.276 X .362 SLOTTED THRU(2 PLCS)
17 SLIDE TRAVEL 16 SLIDE LENGTH
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PANHEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-16-QDZINC PLATED
2250 SERIES16" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (4 PLCS)
.413
.5000 1.2500 2.0000 2.7500 3.2500 3.7500 6.2500
.181 X .205 SLOTTED THRU
13.3125 14.3125 15.0625 15.8125
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU(4 PLCS)
.2500 1.2500 3.5000
15.1250
.197 THRU
.255 THRU (3 PLCS)
14.5000
16.7500
.276 X .362 SLOTTED THRU(2 PLCS)
19 SLIDE TRAVEL 18 SLIDE TRAVEL
2.09
.752
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-18-QDZINC PLATED
2250 SERIES18" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (5 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500 6.2500 8.7500
.181 X .205 SLOTTED THRU
15.3125 16.3125 17.0625 17.8125
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU4 PLCS
21 SLIDE TRAVEL 20 SLIDE LENGTH
.2500 1.2500 3.5000
17.1250
.197 THRU
.255 THRU (3 PLCS)
16.5000
18.7500
.276 X .362 SLOTTED THRU(2 PLCS)
2.09
.752
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-20-QDZINC PLATED
2250 SERIES20" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (5PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
.181 X .205 SLOTTED THRU
14.8125 17.3125 18.3125 19.0625 19.8125
.205 X .453 SLOTTED THRU
.205 X .374 SLOTTED THRU (5 PLCS)
.2500 1.2500 3.5000
19.1250
.197 THRU
.255 THRU (3 PLCS)
18.5000
20.7500
.276 X .362 SLOTTED THRU (2 PLCS)
23 SLIDE TRAVEL 22 SLIDE LENGTH
.752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-22-QDZINC PLATED
2250 SERIES22" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 (5 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
.181 X .205 SLOTTED THRU
16.8125 19.3125
21.0625 20.3125
21.8125
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU(5 PLCS)
.2500 1.2500 3.5000
21.1250
.197 THRU
.255 THRU (3 PLCS)
20.5000
22.7500
.276 X .362 SLOTTED THRU(2 PLCS)
25 SLIDE TRAVEL 24 SLIDE TRAVEL
2.09
.752
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-24-QDZINC PLATED
2250 SERIES24" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (5 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
.181 X .205 SLOTTED THRU
18.7500
22.2500 21.2500
23.0000 23.7500
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU5 PLCS
.2500 1.2500 3.5000
23.1250
.197 THRU .255 THRU (3 PLCS)
22.5000
24.7500
.276 X .362 SLOTTED THRU(2 PLCS)
27 SLIDE TRAVEL 26 SLIDE TRAVEL .752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-26-QDZINC PLATED
2250 SERIES26" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (5 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
.181 X .205 SLOTTED THRU
20.8125
24.3125 23.3125
25.0625 25.8125
.205 X .453 SLOTTED THRU
.205 X .374 SLOTTED THRU(5 PLCS)
.2500 1.2500 3.5000
25.1250
.197 THRU
.255 THRU (5 PLCS)
10.0000 24.5000
26.7500
.276 X .362 SLOTTED THRU(2 PLCS)
29 SLIDE LENGTH 28 SLIDE LENGTH
2.09
.752
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-28-QDZINC PLATED
2250 SERIES28" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (5 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
.181 X .205 SLOTTED THRU
22.8125
26.3125 25.3125
27.0625 27.8125
.205 X .453 SLOTTED THRU
.205 X .374 SLOTTED THRU(5 PLCS)
.2500 1.2500 3.5000
27.1250
.190 THRU
.220 THRU (4 PLCS) 82 COUNTERSINK
12.0000 26.5000
28.7500
.256 X .335 SLOTTED THRU (2 PLCS)82 COUNTERSINK
31 SLIDE TRAVEL 30 SLIDE LENGTH
.752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-30-QDZINC PLATED
2250 SERIES30" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (5 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
15.7500
.181 X .205 SLOTTED THRU
24.8150
28.3150 27.3150
29.0650 29.8150
.205 X .453 SLOTTED THRU.205 X .374 SLOTTED THRU (5 PLCS)
.2500 1.2500 3.5000
29.1250
.190 THRU
.220 THRU (6 PLCS) 82 COUNTERSINK
22.0000
9.5000 16.7500
28.5000
30.7500
.256 X .335 SLOTTED THRU (2 PLCS) 82 COUNTERSINK
33" SLIDE TRAVEL 32" SLIDE LENGTH
.752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-32-QDZINC PLATED
2250 SERIES32" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (7 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
15.7500 21.7500
.181 X .205 SLOTTED THRU
26.8125
30.3125 29.3125
31.0625 31.8125
.205 X .453 SLOTTED HOLE.205 X .374 SLOTTED HOLE(5 PLCS)
.2500 1.2500 3.5000
31.1250
.190 THRU .220 THRU (6 PLCS) 82 COUNTERSINK
24.0000 16.7500 9.5000
30.5000
32.7500
.256 X .335 SLOTTED THRU (2 PLCS)82 COUNTERSINK
35" SLIDE TRAVEL 34" SLIDE LENGTH 2.09 .752
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753" -.780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/28/18
1SHEET 1 OF 1 NAS 06/28/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-34-QDZINC PLATED
2250 SERIES34" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 06/28/18
NS 06/28/18
PN 06/28/18
.205 THRU (7 PLCS)
.413 THRU
.5000 1.2500 2.0000 2.7500 3.2500 3.7500
8.7500 6.2500
15.7500 21.7500
.181 X .205 SLOTTED THRU
.205 X .374 SLOTTED THRU (5 PLCS)
28.8150
32.3150 31.3150
33.0650 33.8150
.205 X .453 SLOTTED THRU
.2500 1.2500 3.5000
33.1250
.190 THRU
.220 THRU (6 PLCS) 82 COUNTERSINK
26.0000 16.7500 9.5000
32.5000
34.7500
.256 X .335 SLOTTED THRU(2 PLCS)82 COUNTERSINK
37" SLIDE TRAVEL 36" SLIDE LENGTH
.752
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
SIDE SPACE:.753' - .780"
REVISIONS
REV. DESCRIPTION DATE
1 INITIAL RELEASE 06/26/18
1SHEET 1 OF 1 NAS 06/26/18
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .03
.XXX = .015.XXXX = .008X/X = 1/32"
ANGLE = 1 SURFACE =
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-36-QDZINC PLATED
2250 SERIES36" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
MB 6/26/18
NS 6/26/18
PN 6/26/18
