Embed Size (px)
Citation preview
* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER* A COLLER
* REMOVE AND THROW AWAY* A RETIRER ET JETER
* DO NOT CEMENT* NE PAS COLLER
* DECAL * DECAL COMANIE
* ASSEMBLY CAUTION*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS* PIECES EN OPTION
* REPEAT PROCEDURE* REPETEZ LE PROCEDE `` ` ` ` `
decal placement18
Semi Gloss Black
Olive Drab
Red
Medium Green
Aluminum
Zinc Chromate
Green
Yellow
Neutral Gray
Wood
this paint guide is provided to complete this kit as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte.
Noir satiné
Gris vert
Rouge
Vert moyen
Aluminum
Vert de zinc
Vert
Jaune
Gris neutre
Bois
* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome plated plastic.
* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.
* Check the fit of each piece before cementing in place.
* Use only cement for polystyrene plastic.* Scrape plating and paint from areas
to be cemented.* Allow paint to dry thoroughly before
handling parts.* Any unused parts may be discarded.
decal applIcatIOn InStRUctIOnS
1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and
slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before
applying clear coat.
nOte: decals are compatible with setting solutions or solvents.
Read tHIS BeFORe YOU BeGIn lIRe ce QUI SUIt aVant de cOmmenceR
* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.
* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.
dIRectIVeS d'applIcatIOn deS aUtOcOllantS
1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
RemaRQUe: les autocollants sont compatibles avec les solutions de fixage ou les solvants.
B-24d lIBeRatOR KIT 5625 85562510200
If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007Be sure to include the plan number (85562510200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
Kit 5625 - Page 12
For most of WWII, Consolidated's B-24 Liberator was the largest bomber available to the U.S. Army Air Forces. Only when the B-29 Superfortress became operational late in the war did the B-24 give up this distinction. The B-24 operated in every theater of the war by the USAAF, and the British also used it in large numbers. Your Revell B-24D model features a detailed cockpit, interior and land-ing gear plus movable turrets and guns, optional bomb bay doors that can be open with a bomb load or closed and a highly detailed tow tractor with towbar. Authentic decal markings with nose art for two vertions are also included.
cOckpIt aSSemBlY1 decal placement17
Kit 5625 - Page 2 Kit 5625 - Page 11
leFt BOmB BaY aSSemBlY2
52INSTRUMENT PANEL
FLAT BLACK WITH FLAT WHITE DETAIL
CONSOLE(FLAT BLACK WITH
FLAT WHITE DETAIL)
104BOMBARDIER'S SEAT
CROMATE GREEN WITH SEAT MILITARY BROWN
104SEAT
114 113
50SIGHT
50 BOMB SIGHT
FLAT BLACK
41CONTROL
YOKEFLAT BLACK
41CONTROL
YOKEFLAT BLACK
19FLOOR
CHROMATE GREEN
9WAIST DOOR
INSIDECHROMATE GREEN
75WINDOW
CLEAR
1L LEFT
FUSELAGEHALF
75WINDOW
CLEAR
21LLEFT WAIST
AMMUNITION BOXNATURAL WOOD
35 BOMB RACK
CHROMATE GREEN
36 BOMB BAYSUPPORT
CHROMATE GREEN
38AFT
RACK SUPPORTCHROMATE GREEN
37FORWARD RACK
SUPPORTCHROMATE
GREEN
37 & 38BOMB RACKSUPPORTS
35BOMB RACK
CHROMATE GREEN
61T
61B
9 OR 20
53SEAT
CHROMATE GREEN
FLESH : HANDS AND FACE, BOTH
KHAKI
BROWN
GRAY
FLAT WHITE : STRAPS, BOTH
BROWN : GOGGLES WITH CLEAR LENS, BOTH
TAN(COLLARS)
54SEAT SUPPORTCHROMATE GREENPILOT CO-PILOT
BOMBARDIER IN POSITIONSEE PAGE 9 FOR ASSEMBLY
500 LB. BOMB
60R
60L1000 LB. BOMB
PAINT NOTE:INSIDE
FUSELAGECHROMATE
GREEN
decal placement16 RIGHt BOmB BaY aSSemBlY3
Kit 5625 - Page 10 Kit 5625 - Page 3
waISt GUn aSSemBlY4
8ANTENNA HOUSINGFLAT BLACK
KHAKI
7REAR ANTENNA
SILVER
9WAIST DOOR
INSIDE ONLYCHROMATE GREEN
75WINDOWS
CLEAR
21RRIGHT WAIST
AMMUNITION BOX
NATURAL WOOD
37 & 38BOMB RACKSUPPORTS
12 OR 23
1000 LB. BOMB
60R 60L
38AFT
RACKSUPPORT
CHROMATE GREEN 20AFT
BULKHEADCHROMATE
GREEN
37FORWRD
RACKSUPPORTCHROMATE
GREEN 36 BOMB BAYSUPPORT
CHROMATE GREEN
46WAIST GUNFLAT BLACK
*
*
*46
WAIST GUNFLAT BLACK
35BOMB RACK
CHROMATE GREEN
22WAIST GUN PLATFORM
CHROMATE GREEN10R
GUN MOUNTCHROMATE GREEN
10LGUN
MOUNTCHROMATE GREEN
11GUN YOKECHROMATE
GREEN
11GUN YOKECHROMATE
GREEN
35BOMB RACK
CHROMATE GREEN
500 LB. BOMB
61T61B
1RRIGHT
FUSELAGEHALF
PAINT NOTE:INSIDE
FUSELAGECHROMATE
GREEN
GUNNERS IN POSITIONSEE PAGE 9 FOR ASSEMBLY
FORwaRd FUSelaGe aSSemBlY5
nOSe GeaR / FUSelaGe aSSemBlY6
tRactOR aSSemBlY14
Kit 5625 - Page 4 Kit 5625 - Page 9
RIGHT LEFT
COMPLETEDCOCKPIT
4LLEFT
NOSE WHEEL DOOR
INSIDE ONLYZINC CHROMATE
108BOMBARDIER'S PANELSEMI GLOSS BLACK WITH
GRAY KNOBS AND ALUMINUM SWITCHES
55RNOSE WHEELRIGHT HALF
SEMI GLOSS BLACK
23NOSE GEAR
STRUT
55LNOSE WHEEL
LEFT HALFSEMI GLOSS BLACK
NEUTRALGRAY
4RRIGHT NOSE WHEEL DOOR
INSIDE ONLYZINC CHROMATE
56NOSE GEARBULKHEADINSIDE ONLY
ZINC CHROMATE
32FORWARDBULKHEAD
ZINC CHROMATE
1RRIGHT
FUSELAGE
1LLEFT
FUSELAGE
57RETAINER
24NOSE GEAR
STRUT SUPPORT
25FENDERBOTTOMNEUTRAL
GRAY
83WINDOW
CLEAR 83WINDOW
CLEAR
106LEFT NOSE
WINDOWCLEAR
FRAME IS FUSELAGE COLOR
75WINDOW
CLEAR
75WINDOW
CLEAR
FIGURe aSSemBlY15
BOMBARDIER STANDING WAIST GUNNER SQUATING WAIST GUNNER
70TRACTOR BOTTOM
OLIVE DRAB
63GRILLE
OLIVE DRAB
71TOW BAROLIVE DRAB
115TORSOKHAKI
120BACKKHAKI 124
BACKKHAKI
117RIGHT ARMKHAKI
122RIGHT ARMKHAKI
125RIGHT ARMKHAKI
116LEFT ARMKHAKI
121LEFT ARMKHAKI
126LEFT ARMKHAKI
118LEGSKHAKI
119FRONTKHAKI
123FRONTKHAKI
BROWN(GLOVES,BOOTS,GOGGLES
WITH CLEAR LENS)
BROWN(GLOVES,BOOTS,GOGGLES
WITH CLEAR LENS)
FLAT WHITE(STRAPS)
GRAY(HOSE)
FLAT WHITE(STRAPS)
GRAY(HOSE)
FLAT WHITE(STRAPS)
GRAY(HOSE)
65WINDSHIELD
OLIVE DRAB
68GUARD
OLIVE DRAB
72SEAT
OLIVE DRABWITH OLIVE GREEN
CUSHIONS
66R HOOD
RIGHT HALFOLIVE DRAB
66L HOOD
LEFT HALFOLIVE DRAB
62FENDERSOLIVE DRAB
69LLEFT TRACKSSTEEL WITH FLAT BLACK RUBBER
SHOES
67COMPRESSORGRAY WITH FLAT
BLACK CYLINDERS
69RRIGHT TRACKSSTEEL WITH FLAT BLACK RUBBER
SHOES
64LIGHT
SHADED AREASILVER
64LIGHT
SHADED AREASILVER
FLIGHT CREW Uniforms - kahki, Jackets - dark brown, Llife Vests - yellow, Straps - dirty white , light gray, or tan, Buckles - silver, Caps - brown, Boots - brown leather with an off-white fleece lining at the top.
SERVICE MECHANICS Coveralls - Olive drab, gray, or khaki, Jackets - Olive green, Caps - olive drab, Boots - brown leather. Wrench - silver or dark gray
BOmB BaY dOOR aSSemBlY12
FROnt nOSe / FInal aSSemBlY13
wInG aSSemBlY7
Kit 5625 - Page 5Kit 5625 - Page 8
31ENGINE FRONT
12COWL RINGS
12COWL RINGS
48PROPELLERS
48PROPELLERS
31ENGINE FRONT
31ENGINE FRONT
14LLEFT WING
BOTTOM
13LLEFT WING
TOP
14RRIGHT WING
BOTTOM
13RRIGHT WING
TOP 59FUEL VENT
59FUEL VENT
31ENGINE FRONT
49PROPELLER
SHAFTS
49PROPELLER
SHAFTSPAINT NOTE
FOR ENGINES:CYLINDERS - STEEL
RODS - GRAY OR BLACK
PAINT NOTEFOR PROPELLERS:SEMI GLOSS BLACK
WITH ALUMINUM HUB AND YELLOW
TIPS
RIGHTCLOSED
DEATAILS OMITTED FOR CLARITY
OPEN
FORWARD
FORWARD
RIGHT WING TO FUSELAGEUNDERSIDE OF AFT FUSELAGE LEFT WING TO FUSELAGE
LEFT
34AFORWARD LEFT
DOORZINC CHROMATE
(INSIDE ONLY)
33CFORWARD LEFT
DOORZINC CHROMATE
(INSIDE ONLY)
34BFORWARD
RIGHT DOORZINC CHROMATE
(INSIDE ONLY)
33DFORWARD
RIGHT DOORZINC CHROMATE
(INSIDE ONLY)
34DAFT LEFT DOOR
ZINC CHROMATE(INSIDE ONLY)
33BAFT LEFT DOOR
ZINC CHROMATE(INSIDE ONLY)
102BELLY PANEL
34CAFT RIGHT
DOORZINC CHROMATE
(INSIDE ONLY)
33AAFT RIGHT
DOORZINC CHROMATE
(INSIDE ONLY)
103NOSE GUNGUNMETAL
103NOSE GUNGUNMETAL
103NOSE GUNS
GUNMETAL
6BOARDING
LADDERCHROMATE GREEN
3REAR
BOARDING DOOR
NEUTRAL GRAY
39TAIL SKID
FUSELAGE COLORALUMINUM
ZINCCROMATE
105NOSECLEAR
(FRAME IS FUSELAGE COLOR)
A
C
B
StRUt tO wInG aSSemBlY8
taIl GUn aSSemBlY9
StaBIlIZeR aSSemBlY10
StaBIlIZeR aSSemBlY cOntInUed10
FROnt FUSelaGe aSSemBlY11
Kit 5625 - Page 6 Kit 5625 - Page 7
58LMAIN GEAR TIRE
OUTER HALFFLAT BLACK
79TURRET DOME
CLEAR
42GUN RING
ZINC CHROMATE
44GUNS
GUNMETAL
43RETAINER RINGZINC CHROMATE
47TAIL GUNSGUNMETAL
15THORIZONTAL STABILIZER
TOP
15BHORIZONTAL STABILIZER
BOTTOM
81TAIL TURRET
FRONTCLEAR
81TAIL TURRET
REARCLEAR
78RRIGHT
COCKPIT WINDOWCLEAR
78LLEFT
COCKPIT WINDOWCLEAR
77CANOPY
CLEAR
74ASTRODOME
CLEAR
5PITOT PROBE
5PITOT PROBE
75WINDOW
CLEAR
58RMAIN GEAR TIRE
INNER HALFFLAT BLACK
26RMAIN WHEEL
STRUT
26LMAIN WHEEL
STRUT
28LSTRUT BRACE
28RSTRUT BRACE
27RSTRUT DOOR
16RRIGHT VERTICAL
STABILIZER INNER
16LLEFT VERTICAL
STABILIZER INNER
16LLEFT VERTICAL
STABILIZER OUTER
16RRIGHT VERTICAL
STABILIZER OUTER
27LSTRUT DOOR
NEUTRALGRAY
LEFT MAIN LANDING GEAR RIGHT MAIN LANDING GEAR
ANGLE FOR PITOT PROBES
COMPLETED HORIZONTAL STABILIZER
AFT END OF FUSELAGEEND VIEW
PAINT NOTE:FRAMES ON WINDOWS, CANOPY AND TURRET IS FUSELAGE COLOR
PAINT NOTE:STRUT ASSEMBLIES
AND WHEEL WELLS ARE PAINTED FUSELAGE
COLOR
StRUt tO wInG aSSemBlY8
taIl GUn aSSemBlY9
StaBIlIZeR aSSemBlY10
StaBIlIZeR aSSemBlY cOntInUed10
FROnt FUSelaGe aSSemBlY11
Kit 5625 - Page 6 Kit 5625 - Page 7
58LMAIN GEAR TIRE
OUTER HALFFLAT BLACK
79TURRET DOME
CLEAR
42GUN RING
ZINC CHROMATE
44GUNS
GUNMETAL
43RETAINER RINGZINC CHROMATE
47TAIL GUNSGUNMETAL
15THORIZONTAL STABILIZER
TOP
15BHORIZONTAL STABILIZER
BOTTOM
81TAIL TURRET
FRONTCLEAR
81TAIL TURRET
REARCLEAR
78RRIGHT
COCKPIT WINDOWCLEAR
78LLEFT
COCKPIT WINDOWCLEAR
77CANOPY
CLEAR
74ASTRODOME
CLEAR
5PITOT PROBE
5PITOT PROBE
75WINDOW
CLEAR
58RMAIN GEAR TIRE
INNER HALFFLAT BLACK
26RMAIN WHEEL
STRUT
26LMAIN WHEEL
STRUT
28LSTRUT BRACE
28RSTRUT BRACE
27RSTRUT DOOR
16RRIGHT VERTICAL
STABILIZER INNER
16LLEFT VERTICAL
STABILIZER INNER
16LLEFT VERTICAL
STABILIZER OUTER
16RRIGHT VERTICAL
STABILIZER OUTER
27LSTRUT DOOR
NEUTRALGRAY
LEFT MAIN LANDING GEAR RIGHT MAIN LANDING GEAR
ANGLE FOR PITOT PROBES
COMPLETED HORIZONTAL STABILIZER
AFT END OF FUSELAGEEND VIEW
PAINT NOTE:FRAMES ON WINDOWS, CANOPY AND TURRET IS FUSELAGE COLOR
PAINT NOTE:STRUT ASSEMBLIES
AND WHEEL WELLS ARE PAINTED FUSELAGE
COLOR
BOmB BaY dOOR aSSemBlY12
FROnt nOSe / FInal aSSemBlY13
wInG aSSemBlY7
Kit 5625 - Page 5Kit 5625 - Page 8
31ENGINE FRONT
12COWL RINGS
12COWL RINGS
48PROPELLERS
48PROPELLERS
31ENGINE FRONT
31ENGINE FRONT
14LLEFT WING
BOTTOM
13LLEFT WING
TOP
14RRIGHT WING
BOTTOM
13RRIGHT WING
TOP 59FUEL VENT
59FUEL VENT
31ENGINE FRONT
49PROPELLER
SHAFTS
49PROPELLER
SHAFTSPAINT NOTE
FOR ENGINES:CYLINDERS - STEEL
RODS - GRAY OR BLACK
PAINT NOTEFOR PROPELLERS:SEMI GLOSS BLACK
WITH ALUMINUM HUB AND YELLOW
TIPS
RIGHTCLOSED
DEATAILS OMITTED FOR CLARITY
OPEN
FORWARD
FORWARD
RIGHT WING TO FUSELAGEUNDERSIDE OF AFT FUSELAGE LEFT WING TO FUSELAGE
LEFT
34AFORWARD LEFT
DOORZINC CHROMATE
(INSIDE ONLY)
33CFORWARD LEFT
DOORZINC CHROMATE
(INSIDE ONLY)
34BFORWARD
RIGHT DOORZINC CHROMATE
(INSIDE ONLY)
33DFORWARD
RIGHT DOORZINC CHROMATE
(INSIDE ONLY)
34DAFT LEFT DOOR
ZINC CHROMATE(INSIDE ONLY)
33BAFT LEFT DOOR
ZINC CHROMATE(INSIDE ONLY)
102BELLY PANEL
34CAFT RIGHT
DOORZINC CHROMATE
(INSIDE ONLY)
33AAFT RIGHT
DOORZINC CHROMATE
(INSIDE ONLY)
103NOSE GUNGUNMETAL
103NOSE GUNGUNMETAL
103NOSE GUNS
GUNMETAL
6BOARDING
LADDERCHROMATE GREEN
3REAR
BOARDING DOOR
NEUTRAL GRAY
39TAIL SKID
FUSELAGE COLORALUMINUM
ZINCCROMATE
105NOSECLEAR
(FRAME IS FUSELAGE COLOR)
A
C
B
FORwaRd FUSelaGe aSSemBlY5
nOSe GeaR / FUSelaGe aSSemBlY6
tRactOR aSSemBlY14
Kit 5625 - Page 4 Kit 5625 - Page 9
RIGHT LEFT
COMPLETEDCOCKPIT
4LLEFT
NOSE WHEEL DOOR
INSIDE ONLYZINC CHROMATE
108BOMBARDIER'S PANELSEMI GLOSS BLACK WITH
GRAY KNOBS AND ALUMINUM SWITCHES
55RNOSE WHEELRIGHT HALF
SEMI GLOSS BLACK
23NOSE GEAR
STRUT
55LNOSE WHEEL
LEFT HALFSEMI GLOSS BLACK
NEUTRALGRAY
4RRIGHT NOSE WHEEL DOOR
INSIDE ONLYZINC CHROMATE
56NOSE GEARBULKHEADINSIDE ONLY
ZINC CHROMATE
32FORWARDBULKHEAD
ZINC CHROMATE
1RRIGHT
FUSELAGE
1LLEFT
FUSELAGE
57RETAINER
24NOSE GEAR
STRUT SUPPORT
25FENDERBOTTOMNEUTRAL
GRAY
83WINDOW
CLEAR 83WINDOW
CLEAR
106LEFT NOSE
WINDOWCLEAR
FRAME IS FUSELAGE COLOR
75WINDOW
CLEAR
75WINDOW
CLEAR
FIGURe aSSemBlY15
BOMBARDIER STANDING WAIST GUNNER SQUATING WAIST GUNNER
70TRACTOR BOTTOM
OLIVE DRAB
63GRILLE
OLIVE DRAB
71TOW BAROLIVE DRAB
115TORSOKHAKI
120BACKKHAKI 124
BACKKHAKI
117RIGHT ARMKHAKI
122RIGHT ARMKHAKI
125RIGHT ARMKHAKI
116LEFT ARMKHAKI
121LEFT ARMKHAKI
126LEFT ARMKHAKI
118LEGSKHAKI
119FRONTKHAKI
123FRONTKHAKI
BROWN(GLOVES,BOOTS,GOGGLES
WITH CLEAR LENS)
BROWN(GLOVES,BOOTS,GOGGLES
WITH CLEAR LENS)
FLAT WHITE(STRAPS)
GRAY(HOSE)
FLAT WHITE(STRAPS)
GRAY(HOSE)
FLAT WHITE(STRAPS)
GRAY(HOSE)
65WINDSHIELD
OLIVE DRAB
68GUARD
OLIVE DRAB
72SEAT
OLIVE DRABWITH OLIVE GREEN
CUSHIONS
66R HOOD
RIGHT HALFOLIVE DRAB
66L HOOD
LEFT HALFOLIVE DRAB
62FENDERSOLIVE DRAB
69LLEFT TRACKSSTEEL WITH FLAT BLACK RUBBER
SHOES
67COMPRESSORGRAY WITH FLAT
BLACK CYLINDERS
69RRIGHT TRACKSSTEEL WITH FLAT BLACK RUBBER
SHOES
64LIGHT
SHADED AREASILVER
64LIGHT
SHADED AREASILVER
FLIGHT CREW Uniforms - kahki, Jackets - dark brown, Llife Vests - yellow, Straps - dirty white , light gray, or tan, Buckles - silver, Caps - brown, Boots - brown leather with an off-white fleece lining at the top.
SERVICE MECHANICS Coveralls - Olive drab, gray, or khaki, Jackets - Olive green, Caps - olive drab, Boots - brown leather. Wrench - silver or dark gray
decal placement16 RIGHt BOmB BaY aSSemBlY3
Kit 5625 - Page 10 Kit 5625 - Page 3
waISt GUn aSSemBlY4
8ANTENNA HOUSINGFLAT BLACK
KHAKI
7REAR ANTENNA
SILVER
9WAIST DOOR
INSIDE ONLYCHROMATE GREEN
75WINDOWS
CLEAR
21RRIGHT WAIST
AMMUNITION BOX
NATURAL WOOD
37 & 38BOMB RACKSUPPORTS
12 OR 23
1000 LB. BOMB
60R 60L
38AFT
RACKSUPPORT
CHROMATE GREEN 20AFT
BULKHEADCHROMATE
GREEN
37FORWRD
RACKSUPPORTCHROMATE
GREEN 36 BOMB BAYSUPPORT
CHROMATE GREEN
46WAIST GUNFLAT BLACK
*
*
*46
WAIST GUNFLAT BLACK
35BOMB RACK
CHROMATE GREEN
22WAIST GUN PLATFORM
CHROMATE GREEN10R
GUN MOUNTCHROMATE GREEN
10LGUN
MOUNTCHROMATE GREEN
11GUN YOKECHROMATE
GREEN
11GUN YOKECHROMATE
GREEN
35BOMB RACK
CHROMATE GREEN
500 LB. BOMB
61T61B
1RRIGHT
FUSELAGEHALF
PAINT NOTE:INSIDE
FUSELAGECHROMATE
GREEN
GUNNERS IN POSITIONSEE PAGE 9 FOR ASSEMBLY
cOckpIt aSSemBlY1 decal placement17
Kit 5625 - Page 2 Kit 5625 - Page 11
leFt BOmB BaY aSSemBlY2
52INSTRUMENT PANEL
FLAT BLACK WITH FLAT WHITE DETAIL
CONSOLE(FLAT BLACK WITH
FLAT WHITE DETAIL)
104BOMBARDIER'S SEAT
CROMATE GREEN WITH SEAT MILITARY BROWN
104SEAT
114 113
50SIGHT
50 BOMB SIGHT
FLAT BLACK
41CONTROL
YOKEFLAT BLACK
41CONTROL
YOKEFLAT BLACK
19FLOOR
CHROMATE GREEN
9WAIST DOOR
INSIDECHROMATE GREEN
75WINDOW
CLEAR
1L LEFT
FUSELAGEHALF
75WINDOW
CLEAR
21LLEFT WAIST
AMMUNITION BOXNATURAL WOOD
35 BOMB RACK
CHROMATE GREEN
36 BOMB BAYSUPPORT
CHROMATE GREEN
38AFT
RACK SUPPORTCHROMATE GREEN
37FORWARD RACK
SUPPORTCHROMATE
GREEN
37 & 38BOMB RACKSUPPORTS
35BOMB RACK
CHROMATE GREEN
61T
61B
9 OR 20
53SEAT
CHROMATE GREEN
FLESH : HANDS AND FACE, BOTH
KHAKI
BROWN
GRAY
FLAT WHITE : STRAPS, BOTH
BROWN : GOGGLES WITH CLEAR LENS, BOTH
TAN(COLLARS)
54SEAT SUPPORTCHROMATE GREENPILOT CO-PILOT
BOMBARDIER IN POSITIONSEE PAGE 9 FOR ASSEMBLY
500 LB. BOMB
60R
60L1000 LB. BOMB
PAINT NOTE:INSIDE
FUSELAGECHROMATE
GREEN
* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER* A COLLER
* REMOVE AND THROW AWAY* A RETIRER ET JETER
* DO NOT CEMENT* NE PAS COLLER
* DECAL * DECAL COMANIE
* ASSEMBLY CAUTION*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS* PIECES EN OPTION
* REPEAT PROCEDURE* REPETEZ LE PROCEDE `` ` ` ` `
decal placement18
Semi Gloss Black
Olive Drab
Red
Medium Green
Aluminum
Zinc Chromate
Green
Yellow
Neutral Gray
Wood
this paint guide is provided to complete this kit as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte.
Noir satiné
Gris vert
Rouge
Vert moyen
Aluminum
Vert de zinc
Vert
Jaune
Gris neutre
Bois
* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome plated plastic.
* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.
* Check the fit of each piece before cementing in place.
* Use only cement for polystyrene plastic.* Scrape plating and paint from areas
to be cemented.* Allow paint to dry thoroughly before
handling parts.* Any unused parts may be discarded.
decal applIcatIOn InStRUctIOnS
1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and
slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before
applying clear coat.
nOte: decals are compatible with setting solutions or solvents.
Read tHIS BeFORe YOU BeGIn lIRe ce QUI SUIt aVant de cOmmenceR
* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.
* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.
dIRectIVeS d'applIcatIOn deS aUtOcOllantS
1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
RemaRQUe: les autocollants sont compatibles avec les solutions de fixage ou les solvants.
B-24d lIBeRatOR KIT 5625 85562510200
If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007Be sure to include the plan number (85562510200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
Kit 5625 - Page 12
For most of WWII, Consolidated's B-24 Liberator was the largest bomber available to the U.S. Army Air Forces. Only when the B-29 Superfortress became operational late in the war did the B-24 give up this distinction. The B-24 operated in every theater of the war by the USAAF, and the British also used it in large numbers. Your Revell B-24D model features a detailed cockpit, interior and land-ing gear plus movable turrets and guns, optional bomb bay doors that can be open with a bomb load or closed and a highly detailed tow tractor with towbar. Authentic decal markings with nose art for two vertions are also included.
