UeRON INTERNATIONAL COMPANYhttp://www.ueron.com.tw

17.3" 3G Waveform Monitor

RBM-1731A User Manual

Ver : 2.0

- 2 -

Contents Caution ------------------------------------------------------------ 3

Warranty ---------------------------------------------------------- 4

Specification ----------------------------------------------------- 5

Formats ------------------------------------------------------------ 6

External Control ------------------------------------------------------- 19

Dimension ----------------------------------------------------------- 28

Accessory ---------------------------------------------------------------- 29

Controls ------------------------------------------------------------ 8

Front Panel --------------------------------------------------------------- 8

Menu Function --------------------------------------------------------- 7

Shortcuts ---------------------------------------------------------------- 10

Rear Panel -------------------------------------------------------------- 11

Auxiliary Function ---------------------------------------------------- 13

RS-232 Remote Control -----------------------------------------19

RJ-45 Remote Control ---------------------------------------------22

Tally Control ----------------------------------------------------27

Standard Accessory -----------------------------------------------29

Optional Accessory --------------------------------------------30

- 3 -

● All operating instructions must be read and understood before the product is operated. ● These safety and operating instructions must be kept in a safe place for future reference. ● All operating instructions must be followed. ● Do not use this unit in or near water. ● Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious

damage. ● This product must be operated on a power source specified on the specification label. ● This product should only be operate d from the type of power source indicated on the marking

label of the AC adapter. If you are not sure of the type of power available, consult your dealer or your local power company.

● In case of using other 12V DC adapters instead of the standard adapter provided by the manufacturer, please check the proper load capacity (or current capacity) and use an adapter with stable voltage.

● The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.

● Do not overload DC outlets or extension cords. Over loading can cause or electric shock. ● Except as specifically explained elsewhere in this manual, do not attempt to service this product

yourself. may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel.

● Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions:

a. When the power cord is damaged or frayed; b. When liquid has spilled into the unit; c. When the product has been exposed to rain or water; d. When the product does not operate normally under normal operating conditions. Adjust only

those controls that are covered by the operating instructions in this manual; improper adjustment of other. controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation;

e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicating a need for service.

Caution

- 4 -

● Equipment is guaranteed against any manufacturing defects for one year from the date of purchase.

● Certain parts with limited lifetime expectancy such as LCD Panels for one year ● The original purchase invoice or other documentary evidence should be supplied at the time of

any request for repair under warranty. ● Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by

this warranty. ● All mail or transportation costs including insurance are at the expense of the owner. ● All other claims of any nature are not covered. ● Cables & batteries are not covered under warranty. ● Warranty only valid within the country or region of purchase. ● Your statutory rights are not affected.

Warranty

- 5 -

Specification

- 6 -

Compatible Resolutions and Formats

Formats

- 7 -

Menu Function

- 8 -

Front Panel Tally Lamp

Tally lamp can be switched to a green light display. The 9 PIN D-SUB Port must be connected.

Power On/Off Button Press this POWER button to power on the monitor ( the indicator turns blue), press

the button again to turn off the monitor.

HV Daly Button /Zoom Knobs Button: Shows Horizontal and Vertical blank area of input source. Knobs: Zoom in the picture to see picture details more clearly.

Controls

1

2

3

- 9 -

Safe Area Button /CON Knobs Button: Safe Area size includes 70/ 75/ 80/ 85/ 90/ 93/ 96 %. Knobs: Adjusts CONTRAST of image ( 0~100 indication ).

ESC Button /BRI Knobs Button: Exit MENU options. Knobs: Adjusts BRIGHTNESS of image ( 0~100 indication ).

MENU Button /VOL Knobs Button: Enter MENU options; Rotate left and right to select any function. Knobs: Adjusts volume level ( 0~100 indication ). Scopes Button Choose a variety of graphic analysis with Vector, Y/RGB Histogram,

Meters and Audio (dBFS), W.F/P (Luminance, RGB/YUV Parade), All.

Use ALL button display 5 types analysis such as Vector, Y/RGB Histogram, Luminance, RGB/YUV Parade and Audio Meter on screen.

Source Button Select the input signal source ( SDI 1/SDI 2, HDMI, CVBS, VGA ), when feed input

source the LED light turns blue. Shortcuts Button Select the desired function setting F1 ~ F4, how to configure those functions ?

Please view the follow instruction (on page 10 ). Phone 3.5mm headphone Socket; internal speaker circuit will automatically mute when

headphone is connected. Speaker 2W speaker Left/Right, audio signal by the input select button.

4

5

6

7

8

9

10

11

- 10 -

Shortcuts ● The function can be set via the "Shortcuts menu".

● Open the "Shortcuts menu" after the first time, the selected function will remain.

● Use "Shortcuts menu" to assign F1~F4. You can assign the function from among:

Check Field, Zebra Switch, Focus Assist, False Color, Pixel To Pixel, Mirror, Freeze, Pattern, Marker Type, Center Marker, Nine Grid, Mute, Scan Mode, Time Code, Anamorphic Format.

OPERATION:

● Press NENU knob to display the function menu list in the top left of the screen. ●Rotate NENU knob to Shortcuts F1~F4 change the value related to this function. ●After the setting is completed, operate the F1 ~ F4 buttons on the bottom of the monitor.

- 11 -

Rear Panel SDI 1 IN/OUT (BNC)

IN: SDI Signal input terminal that provides SDI 1 signal. (Support 3G/HD/SD) OUT: active through-out is only outputted when SDI 1 is using the input select. SDI 2 IN/OUT (BNC)

IN: SDI Signal input terminal that provides SDI 2 signal. (Support 3G/HD/SD) OUT: active through-out is only outputted when SDI 2 is using the input select. AUDIO IN (RCA)

IN: Common audio input terminal for CVBS input terminal.

CVBS IN/OUT (BNC)

IN: CVBS Signal input terminal that provides CVBS signal. OUT: active through-out is only outputted when CVBS is using the input select.

1

2

3

4

- 12 -

HDMI IN IN: HDMI Signal input terminal that provides HDMI signal. (Support HDMI 1.3) VGA IN IN: VGA Signal input terminal that provides VGA signal.

TALLY Tally light information can be supplied. Control 1 /2 Control (1): External control is possible by using a RS-232 signal. Control (2): External control is possible by using a RJ-45 signal. POWER Attach the power cord to the monitor unit.

5

6

7

8

9

- 13 -

Auxiliary Function

- 14 -

Scopes

Time code

Luminance (16~235 Level)

RGB Parade(0~100 %)

YUV Parade (16~235 Level)

Vector

Y Histogram

RGB Histogram

Audio Meter

- 15 -

Zebra Exposure

Focus Assist

False Color

Exposure 50 Exposure 0

low high

- 16 -

Check Field

Pattern

Gray only Blue only

Red only Green only

- 17 -

Marker Display

H/V Delay

Original H Delay

V Delay HV Delay

- 18 -

Mirror

Nine Grids

Original hor

ver hor & ver

- 19 -

RS-232 Remote Control Pin Define

RS-232 Remote Control Connection

External Control

- 20 -

RS-232 Remote Control Client Operating 1. Open the "AccessPort.exe " file.

(Please download the file from http://www.righton.com.tw) 2. Open" Tools" select "Configuration". Enter the options "Custom Baud Rate" check "Enable" to "Serial Port Settings" confirm the COM port.

3. Choose a file to "Load ": CommandData.txt .

(Please download the file from http://www.righton.com.tw) 4. Select the need to send a serial command, press the "Step Next" to send instructions.

- 21 -

RS-232 Remote Control Command Data

- 22 -

RJ-45 Remote Control Pin Define

RJ-45 Remote Control Connection

- 23 -

RJ-45 Remote Control UPD Client Remote Control Board IP Config Default Host IP: 192.168.1.8 (This address can be changed through USART or NET cmd.) Port: 7000 Set Remote IP Address (if current IP is 192.168.1.8, and we want to set it to 192.168.1.9)

Command line: EA 08 00 C0 A8 01 09 9B Response:

Success: EA 08 00 C0 A8 01 09 9B Fail: EA 08 00 C0 A8 01 08 9C

Operating 1. Open the " UDP Test Tool "file.

(Please download the file from http://www.righton.com.tw) 2. Remote IP (192.168.1.9)/ Hostname and UDP Port (7000)

3. Checkbox to send in HEX. 4. Enter the need to send a serial command, Press to "send" instructions.

2

3 4

- 24 -

RJ-45 Remote Control Command Data Board Net Information Router's IP: 192.168.1.1 Netmask: 255.255.255.0 Default Host IP: 192.168.1.8 (This address can be changed through USART or NET cmd.) Port: 7000

Protocol Format NET AND USART USE THE SAME Format: Command: [HEAD] [LEN][CMD] [DATAn…] [CS] Response: 1. Format:[HEAD] [LEN][CMD] [STATUS] [CS]

2. Format for success to set IP (for command 0x00 only). [HEAD] [LEN] [CMD] [IP ADDR][CS]

3. Nothing. Timeout. / Error. [HEAD]: 0xEA [LEN]: Number of command line bytes. 4 + [Data Length] [CMD]: Please refer to the column[CMD]of the table below. [DATAn…]: Please refer to the column [DATAn…] of the table below. [CS]: Sum of all command line data must be 0xFF (ignore overflow).

Step 1: Add up all data except [CS] Step 2: The result of step 1 mod 256. Step 3: 0xFF minus the result of step 2.

[STATUS]: 0x01- Success. 0x00-Fail. Examples:

1. Switch channel to HDMI. Command line: EA 05 01 02 0D Response: EA 05 01 01 0E

2. Set IP Address(if current IP is 192.168.1.8, and we want to set it to 192.168.1.9)

Command line: EA 08 00 C0 A8 01 09 9B Response:

Success:EA 08 00 C0 A8 01 09 9B Fail: EA 08 00 C0 A8 01 08 9C

- 25 -

Protocol Commands

CMD (Hex)

DATAn… (Hex)

Data Length (Dec)

Description

00 C0 A8 01 08 DefaultIP Address (192.168.1.8)

4 Set Host IP. Response IP

01 00 01 02 03 04

00:SDI1 01:SDI2 02:HDMI 03:CVBS 04:VGA

1 Switch channel

02 00 01 02 03 04

00:OFF 01:Gray 02:Red 03:Green 04:Blue

1 Check Field

03 00 01

00:OFF 01:ON

1 False Color

04 00 01

00:OFF 01:ON

1 Zebra switch

05 00 01

00:OFF 01:ON

1 Focus Assist

06 00 01

00:OFF 01:ON

1 Time Code

07 00 01

00:OFF 01:ON

1 Center Marker

08 00 01 02 03 04 05 06 07

00:OFF 01:70% 02:75% 03:80% 04:85% 05:90% 06:93% 07:96%

1 Safe area

09 00 01

00:OFF 01:ON

1 Luminance (Wave)

0A 00 01

00:OFF 01:ON

1 RGB Parade

0B 00 01

00:OFF 01:ON

1 YUV Parade

- 26 -

0C 00 01

00:OFF 01:ON

1 RGB Histogram

0D 00 01

00:OFF 01:ON

1 Y Histogram

0E 00 01

00:OFF 01:ON

1 Vector

0F 00 01

00:OFF 01:ON

1 Audio Meter

10 00 01 02

00:Normal 01:Underscan 02:Overscan

1 Scan mode

11 00 01 02 03

00:0FF 01:H Delay 02:V Delay 03:H&V Delay

1 HV Delay

12 00 01 02 03

00:OFF 01:H Mirror 02:V Mirror 03:H&V Mirror

1 Mirror

13 00 01

00:OFF 01:ON

1 Freeze

14 00 01 02 03

00:OFF 01:4X 02:9X 03:16X

1 Zoom

15 00 01

00:OFF 01:ON

1 Mute

16 00 01

00:Brightness- 01:Brightness+

1 Brightness

17 00 01

00:Contrast- O1:Contrast+

1 Contrast

- 27 -

Tally Control Pin define Please use D-SUB 9 Pin cable as above Pin-1and Pin-6 circuit.

- 28 -

Dimension Unit: mm (inches)

- 29 -

Standard Accessory

Accessory

- 30 -

Optional Accessory

● Optional metal chassis for RBM-1731 C/17.3" 3G stand alone Waveform Monitor.