Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
ø16mmH6
Series
Miniature Control Units
(06/11/30)
H6
Series
Miniature Control Units
2
ø16
Note: Specify a bezel code in place of
in the Type No.
Series
H6 Series Miniature Control Units
Mounting Hole Size
ø16 mm
Type
HA L HA1L- 3 HA P HA B-
∗∗∗∗
1
Appearance
Unit Illuminated Pushbuttons(Momentary, Maintained)
Mushroom Illuminated Pushbuttons
(Momentary, Maintained)
Pilot Lights(Separate type,Unibody type)
Flush Pushbuttons(Momentary, Maintained)
Bezel Size(Operator Size)
Bezel Color Black
Light Source LED lamp (IDEC’s LFTD Type) —
Lens/Button Color Lens Color: Amber, Blue, Green, Red, Yellow, WhiteButton Color:Black, Blue, Green, Red,Yellow, White
Con
tact
Contact Configuration
SPDT, DPDT (gold-clad silver, silver) —SPDT, DPDT(gold-clad silver, silver)
Contact Rating(resistive load)
Gold-clad silver contacts:125V AC · 0.1A, 30V DC · 0.1ASilver contacts: 125V AC · 3A, 30V DC · 2A
—
Gold-clad silver contacts: 125V AC · 0.1A,30VDC · 0.1ASilver contacts:125V AC · 3A, 30VDC · 2A
Dur
abili
ty
Electrical 100,000 operations minimum —100,000 operationsminimum
MechanicalMomentary: 1,000,000 operations minimumMaintained: 200,000 operations minimum —
Momentary:1,000,000 operationsminimum
Maintained:200,000 operationsminimum
Degree of Protection IP65 (IEC 60529)
Terminal Style Solder/Tab terminal #110PCB Terminal (gold contact only)
Acc
esso
ries Switch Guard Yes — — Yes
Terminal Cover Yes Yes Yes Yes
Mounting Hole Plug Yes
Remarks
•
Separate contact block mount can be removed from the operator.
•
Large operators for easy operation; bezel size ø24mm or 24
×
24 mm
•
Shock- and vibration-resistant rugged design, waterproof and dust-tight
Approvals
See Page
6 7 9 11
Separate Type
Unibody Type
ø24 24 24
ø30mm Button
ø24 ø24 24 24
(06/11/30)
H6
Series
Miniature Control Units
3
ø16
Note: Specify a bezel code in place of
in the Type No.
Series
H6 Series Miniature Control Units
Mounting Hole Size
ø16 mm
Type
HA B-
∗∗∗∗
2 HA1B-
∗∗∗∗
3 HA1B-V2E HA1E-V2S
Appearance
UnitExtended Pushbuttons
(Momentary, Maintained)Mushroom Pushbuttons
(Momentary, Maintained)Pushlock Turn Reset
Emergency Stop SwitchPushlock Turn Reset
Emergency Stop Switch
Bezel Size(Operator Size)
Bezel Color Black
Light Source —
Lens/Button Color Button Color:Black, Blue, Green, Red, Yellow, White
Button Color:Red only
Button Color:Red only
Con
tact
Contact Configuration
SPDT, DPDT (gold-clad silver, silver) 1NC, 2NC (silver) 1NC, 2NC (silver)
Contact Ratings(resistive load)
Gold-clad silver contacts: 125V AC · 0.1A, 30V DC · 0.1ASilver contacts: 125V AC · 3A, 30V DC · 2A
250V AC · 1.5A125VDC · 0.22A
250V AC · 1.5A125VDC · 0.22A
Dur
abili
ty
Electrical 100,000 operations minimum 100,000 operationsminimum
100,000 operationsminimum
MechanicalMomentary: 1,000,000 operations minimumMaintained: 200,000 operations minimum
250,000 operationsminimum
250,000 operationsminimum
Degree of Protection IP65 (IEC 60529)
Terminal Style Solder/Tab terminal #110PCB Terminal (gold contacts only)
Solder/Tab terminal #110PCB Terminal
Solder TerminalPCB Terminal
Acc
esso
ry Terminal Cover Yes Yes Yes
Mounting Hole Plug Yes Yes Yes
Remarks
•
Separate contact block can be removed from theoperator.
•
Large operators for easy operation
•
Shock- and vibration-resistant rugged design, water-proof
•
Direct opening action
•
Safety lock mechanism
Approvals
See Page
12 12 27 27
Direct Opening Action Direct Opening Action
Short Body Type
ø24 24 24 ø24
ø30mm Button ø24.9mm Buttonø24.7
(06/11/30)
H6
Series
Miniature Control Units
4
ø16
Series
H6 Series Miniature Control Units
Mounting Hole Size
ø16 mm
Type
HA1S / HA3S HA1K / HA3K HA1F / HA3F HA1R
Appearance
Unit
Selector Switches2-position maintained2-position spring-return3-position maintained3-position spring-return
Key Selector Switches2-position maintained2-position spring-return3-position maintained3-position spring-return
Illuminated Selector Switches
2-position maintained2-position spring-return3-position maintained3-position spring-return
Selector Pushbuttons2-position3-position
Bezel Size(Operator Size)
Bezel Color Black
Light Source — —LED lamp(IDEC’s LFTD Type) —
Lens/Button ColorKnob Color: BlackColor Insert: White
Key Cylinder:Black (plastic)
Illumination Color:Amber, Blue, Green, Red, Yellow, White
Button Color:Black, Blue, Green, Red, Yellow
Con
tact
Contact Configuration
SPDT, DPDT (gold-clad silver, silver)
Contact Ratings(resistive load)
Gold-clad silver contacts:125V AC · 0.1A, 30V DC · 0.1ASilver contacts:125V AC · 3A, 30V DC · 2A
Dur
abili
ty Electrical 100,000 operations minimum
Mechanical 250,000 operations minimum
Degree of Protection IP65 (IEC 60529)
Terminal StyleSolder/Tab terminal #110PCB Terminal (gold contacts only)
Acc
esso
ry Terminal Cover Yes
Mounting Hole Plug Yes
Remarks
•
Separate contact block can be removed from the operator.
•
Large operators for easy operation; bezel size ø24mm or 24
×
24 mm
•
Shock- and vibration-resistant rugged design, waterproof
Approvals
See Page
14 16 and 17 19 and 20 22
ø24 24 ø25
(06/11/30)
5
H6
Series
Miniature Control Units
Designed to ensure ease of operation and safetyIdeal for heavy duty applications such as machine tools• Separate contact block makes installation and removal easy.• Large operators; bezel size (ø24 mm, 24×24 mm)• High operating force and long stroke prevent inadvertent oper-
ation.• Contact blocks can be removed when units are mounted col-
lectively.• Shock- and vibration-resistant rugged design• IP65• UL recognized, CSA certified• EN compliant
(EN 60947-1, EN 60947-5-1, TÜV approved)
Emergency stop switches are DEMKO-approved.
Contact RatingsExcept for emergency stop switches (see page 27).• Gold Contact
Minimum applicable load (reference value): 5V AC/DC, 1 mA(Applicable range is subject to the operating condition and load.)
• Silver Contact
AC inductive load: PF = 0.6 to 0.7, DC inductive load: L/R = 7 ms maximum
Built-in LED Lamp Ratings
Specifications
Rated Insulation Voltage 250V
Rated Thermal Current 3A
Rated Operating Voltage 125V AC 30V DC
Rated Operating Current(resistive load) 0.1A 0.1A
Contact Material Gold-clad silver
Rated Insulation Voltage 250V
Rated Thermal Current 5A
Rated Operating Voltage 30V 125V 250V
Rated Operating Current
AC50/60 Hz
Resistive Load — 3A 2A
Inductive Load — 2A 1.5A
DCResistive Load 2A 0.4A —
Inductive Load 1A 0.2A —
Contact Material Silver
Type No. LFTD-5➁ LFTD-1➁ LFTD-2➁
Lamp Base SX6S/8×5.4
Operating Voltage 5V DC±5% 12V AC/DC ±10% 24V AC/DC ±10%
Rated Voltage 5V DC 12V AC/DC 24V AC/DC
Current Draw
AC — 9 mA 9 mA
DC 8 mA 8 mA 8 mA
Color Code ➁Specify a color code in place of ➁ in the Type No.A (amber), G (green), R (red), S (blue), W (white),Y (yellow)
Lamp Base Color Same as illumination color
Voltage Marking Die stamped on the lamp base.
Life(reference value)
Approx. 50,000 hours(When used on complete DC, luminance reduces to 50% of the initial intensity.)
Internal Circuit
A, R, W, Y A, R, W, Y
G, S G, S
(+) (–)
(+) (–) LED Chip
Protection Diode
Zener Diode
Operating Temperature –25 to +55°C (no freezing)
Storage Temperature –30 to +80°C
Operating Humidity 45 to 85% RH (no condensation)
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Dielectric Strength
Switch Unit
Between live part and ground:2,500V, 1 minute
Between terminals of different poles:2,500V, 1 minute
Between terminals of the same pole:1,000V, 1 minute
Illumination Unit
Between live part and ground:2,500V, 1 minute
Vibration Resistance Operating extremes:5 to 55 Hz, amplitude 0.5 mm
Shock Resistance Operating extremes: 100 m/s2 (10G)Damage limits: 1,000 m/s2 (100G)
Mechanical Durability(minimum operations)
Momentary: 1,000,000Maintained: 200,000 Selector switch: 250,000Key selector switch: 250,000Illuminated selector switch: 250,000Selector pushbutton: 250,000
Electrical Durability(minimum operations)
Momentary: 100,000(at 1,800 operations/hour)
Maintained: 100,000(at 1,200 operations/hour)
Selector switch: 100,000
Degree of Protection IP65 (IEC 60529)
Terminal Style Solder/tab terminal #110PC board terminal
Weight (approx.)
HA1L-M1C24: 18gHA1P-1C04: 17gHA1P-14: 13gHA1B-M1C2: 16gHA1S-2C2: 18gHA1K-2C2A: 33gHA1F-2C24: 20g
ø16
(06/11/30)
H6
Series
Miniature Control Units
6
ø16
Note: Specify a lens color code in place of
➁
in the Type No.Package quantity: 1
HA1L/HA2L Illuminated Pushbuttons
Style Operation Contact Material
OperatingVoltage Contact
Type No.
➁
Lens Color CodeSolder/Tab
Terminal PC Board Terminal
RoundHA1L
Momentary
Gold
5V DC±5%
SPDT HA1L-M1C11
➁
HA1L-M1C11V
➁
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA1L-M1C21
➁
HA1L-M1C21V
➁
12V AC/DC±10%
SPDT HA1L-M1C13
➁
HA1L-M1C13V
➁
DPDT HA1L-M1C23
➁
HA1L-M1C23V
➁
24V AC/DC ±10%
SPDT HA1L-M1C14
➁
HA1L-M1C14V
➁
DPDT HA1L-M1C24
➁
HA1L-M1C24V
➁
Silver
5V DC±5%
SPDT HA1L-M1C51
➁
—
DPDT HA1L-M1C61
➁
12V AC/DC ±10%
SPDT HA1L-M1C53
➁
DPDT HA1L-M1C63
➁
24V AC/DC ±10%
SPDT HA1L-M1C54
➁
DPDT HA1L-M1C64
➁
Maintained
Gold
5V DC±5%
SPDT HA1L-A1C11
➁
HA1L-A1C11V
➁
DPDT HA1L-A1C21
➁
HA1L-A1C21V
➁
12V AC/DC ±10%
SPDT HA1L-A1C13
➁
HA1L-A1C13V
➁
DPDT HA1L-A1C23
➁
HA1L-A1C23V
➁
24V AC/DC ±10%
SPDT HA1L-A1C14
➁
HA1L-A1C14V
➁
DPDT HA1L-A1C24
➁
HA1L-A1C24V
➁
Silver
5V DC±5%
SPDT HA1L-A1C51
➁
—
DPDT HA1L-A1C61
➁
12V AC/DC ±10%
SPDT HA1L-A1C53
➁
DPDT HA1L-A1C63➁
24V AC/DC ±10%
SPDT HA1L-A1C54➁
DPDT HA1L-A1C64➁
SquareHA2L
Momentary
Gold
5V DC±5%
SPDT HA2L-M1C11➁ HA2L-M1C11V➁
DPDT HA2L-M1C21➁ HA2L-M1C21V➁
12V AC/DC ±10%
SPDT HA2L-M1C13➁ HA2L-M1C13V➁
DPDT HA2L-M1C23➁ HA2L-M1C23V➁
24V AC/DC ±10%
SPDT HA2L-M1C14➁ HA2L-M1C14V➁
DPDT HA2L-M1C24➁ HA2L-M1C24V➁
Silver
5V DC±5%
SPDT HA2L-M1C51➁
—
DPDT HA2L-M1C61➁
12V AC/DC ±10%
SPDT HA2L-M1C53➁
DPDT HA2L-M1C63➁
24V AC/DC ±10%
SPDT HA2L-M1C54➁
DPDT HA2L-M1C64➁
Maintained
Gold
5V DC±5%
SPDT HA2L-A1C11➁ HA2L-A1C11V➁
DPDT HA2L-A1C21➁ HA2L-A1C21V➁
12V AC/DC ±10%
SPDT HA2L-A1C13➁ HA2L-A1C13V➁
DPDT HA2L-A1C23➁ HA2L-A1C23V➁
24V AC/DC ±10%
SPDT HA2L-A1C14➁ HA2L-A1C14V➁
DPDT HA2L-A1C24➁ HA2L-A1C24V➁
Silver
5V DC±5%
SPDT HA2L-A1C51➁
—
DPDT HA2L-A1C61➁
12V AC/DC ±10%
SPDT HA2L-A1C53➁
DPDT HA2L-A1C63➁
24V AC/DC ±10%
SPDT HA2L-A1C54➁
DPDT HA2L-A1C64➁
(06/11/30)
H6 Series Miniature Control Units
7
ø16
Note: Specify a lens color code in place of ➁ in the Type No.Package quantity: 1
HA3L/HA4L/HA1L-M3/A3 LED Illuminated Pushbuttons
Style Operation Contact Material
OperatingVoltage Contact
Type No.➁ Lens Color
CodeSolder/Tab Terminal
PC Board Terminal
Round w/Square BezelHA3L
Momentary
Gold
5V DC ±5%
SPDT HA3L-M1C11➁ HA3L-M1C11V➁
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA3L-M1C21➁ HA3L-M1C21V➁
12V AC/DC±10%
SPDT HA3L-M1C13➁ HA3L-M1C13V➁
DPDT HA3L-M1C23➁ HA3L-M1C23V➁
24V AC/DC±10%
SPDT HA3L-M1C14➁ HA3L-M1C14V➁
DPDT HA3L-M1C24➁ HA3L-M1C24V➁
Silver
5V DC±5%
SPDT HA3L-M1C51➁
—
DPDT HA3L-M1C61➁
12V AC/DC±10%
SPDT HA3L-M1C53➁
DPDT HA3L-M1C63➁
24V AC/DC±10%
SPDT HA3L-M1C54➁
DPDT HA3L-M1C64➁
Maintained
Gold
5V DC±5%
SPDT HA3L-A1C11➁ HA3L-A1C11V➁
DPDT HA3L-A1C21➁ HA3L-A1C21V➁
12V AC/DC±10%
SPDT HA3L-A1C13➁ HA3L-A1C13V➁
DPDT HA3L-A1C23➁ HA3L-A1C23V➁
24V AC/DC±10%
SPDT HA3L-A1C14➁ HA3L-A1C14V➁
DPDT HA3L-A1C24➁ HA3L-A1C24V➁
Silver
5V DC±5%
SPDT HA3L-A1C51➁
—
DPDT HA3L-A1C61➁
12V AC/DC±10%
SPDT HA3L-A1C53➁
DPDT HA3L-A1C63➁
24V AC/DC±10%
SPDT HA3L-A1C54➁
DPDT HA3L-A1C64➁
Square w/Four-sidedBarrier HA4L
Momentary
Gold
5V DC±5%
SPDT HA4L-M1C11➁ HA4L-M1C11V➁
DPDT HA4L-M1C21➁ HA4L-M1C21V➁
12V AC/DC±10%
SPDT HA4L-M1C13➁ HA4L-M1C13V➁
DPDT HA4L-M1C23➁ HA4L-M1C23V➁
24V AC/DC±10%
SPDT HA4L-M1C14➁ HA4L-M1C14V➁
DPDT HA4L-M1C24➁ HA4L-M1C24V➁
Silver
5V DC±5%
SPDT HA4L-M1C51➁
—
DPDT HA4L-M1C61➁
12V AC/DC±10%
SPDT HA4L-M1C53➁
DPDT HA4L-M1C63➁
24V AC/DC±10%
SPDT HA4L-M1C54➁
DPDT HA4L-M1C64➁
ø30 MushroomHA1L- 3
Momentary
Gold
5V DC±5%
SPDT HA1L-M3C11➁ HA1L-M3C11V➁
DPDT HA1L-M3C21➁ HA1L-M3C21V➁
12V AC/DC±10%
SPDT HA1L-M3C13➁ HA1L-M3C13V➁
DPDT HA1L-M3C23➁ HA1L-M3C23V➁
24V AC/DC±10%
SPDT HA1L-M3C14➁ HA1L-M3C14V➁
DPDT HA1L-M3C24➁ HA1L-M3C24V➁
Silver
5V DC±5%
SPDT HA1L-M3C51➁
—
DPDT HA1L-M3C61➁
12V AC/DC±10%
SPDT HA1L-M3C53➁
DPDT HA1L-M3C63➁
24V AC/DC±10%
SPDT HA1L-M3C54➁
DPDT HA1L-M3C64➁
Maintained
Gold
5V DC±5%
SPDT HA1L-A3C11➁ HA1L-A3C11V➁
DPDT HA1L-A3C21➁ HA1L-A3C21V➁
12V AC/DC±10%
SPDT HA1L-A3C13➁ HA1L-A3C13V➁
DPDT HA1L-A3C23➁ HA1L-A3C23V➁
24V AC/DC±10%
SPDT HA1L-A3C14➁ HA1L-A3C14V➁
DPDT HA1L-A3C24➁ HA1L-A3C24V➁
Silver
5V DC±5%
SPDT HA1L-A3C51➁
—
DPDT HA1L-A3C61➁
12V AC/DC±10%
SPDT HA1L-A3C53➁
DPDT HA1L-A3C63➁
24V AC/DC±10%
SPDT HA1L-A3C54➁
DPDT HA1L-A3C64➁
(06/11/30)
H6 Series Miniature Control Units
8
ø16
Dimensions (Illuminated Pushbuttons)
Square
Locking Ring
Anti-rotation Ring
Rubber Gasket
PC Board Terminal
PC Board Terminal Type Solder/Tab Terminal Type
Width 0.8×0.5t
1.45
6.4
6.8
Panel Thickness 0.5 to 6
0.6
9
10.5 13.5
9
2.6
36 11
16
61.
2
LOCK
15.8
2̄1
17.8
R15.5
15
5
2
5.5
6.4
6.8
1.45
c 24 c 24
Squarew/4-sided Barrier
c 24
ø24
Right Contact
Left Contact
Round Roundw/Square BezelTerminal Width 2.8×0.5t
Tab Terminal Width 2.8×0.5t
Anti-rotation Ring
Locking RingRubber Gasket
X1
CN
ON
C
CN
ON
C
X2
X2
20
11
0.6
ø30
36
TO
P
LOC
K
66
1 2.61.2
2-R0.
6
9
1.45
13.510.5
17.8
R15.5
15.8
ø21
Panel Thickness 0.5 to 6
6.8
6.4
1
LOCK
ø16.2+0.2
0
24 min.
24 m
in.
1.45
6.4 6.8
1
55
ø1.2 holes
(TOP)
NC
NO
C
NC
NO
C
X1
X2
X2
Lamp Terminal (+)
Lamp Terminal (–)
(TOP)
ø16.2 +0.20
35 min.
35 m
in.
• Round• Square• Round w/Square
Bezel
• Mushroom
Mounting Hole LayoutMounting Centers
PC Board Drilling Layout(Bottom View)
Terminal Arrangement (Bottom View)
• Round• Square• Round w/Square Bezel
• Mushroom
All dimensions in mm.
Note: Determine mounting centers to ensure easy operation.
• SPDT has C, NO, and NC on the right only.• X2 and X2 are wired internally.
(06/11/30)
H6 Series Miniature Control Units
9
ø16
Separate Type
• See page 10 for dimensions.
Unibody Type
• See page 10 for dimensions.
HA1P/HA2P/HA3P/HA4P LED Illuminated Pilot Lights
Shape Operating VoltageType No.
➁ Lens Color CodeSolder/Tab Terminal PC Board Terminal
5V DC ±5% HA1P-1C01➁ HA1P-1C01V➁
Specify a color code in place of ➁ in the Type No.A: amberG: greenR: redS: blueW: whiteY: yellow
12V AC/DC ±10% HA1P-1C03➁ HA1P-1C03V➁
24V AC/DC ±10% HA1P-1C04➁ HA1P-1C04V➁
5V DC ±5% HA2P-1C01➁ HA2P-1C01V➁
12V AC/DC ±10% HA2P-1C03➁ HA2P-1C03V➁
24V AC/DC ±10% HA2P-1C04➁ HA2P-1C04V➁
5V DC ±5% HA3P-1C01➁ HA3P-1C01V➁
12V AC/DC ±10% HA3P-1C03➁ HA3P-1C03V➁
24V AC/DC ±10% HA3P-1C04➁ HA3P-1C04V➁
5V DC ±5% HA4P-1C01➁ HA4P-1C01V➁
12V AC/DC ±10% HA4P-1C03➁ HA4P-1C03V➁
24V AC/DC ±10% HA4P-1C04➁ HA4P-1C04V➁
Shape Operating VoltageType No.
➁ Lens Color CodeSolder/Tab Terminal PC Board Terminal
5V DC ±5% HA1P-11➁ —
Specify a color code in place of ➁ in the Type No.A: amberG: greenR: redS: blueW: whiteY: yellow
12V AC/DC ±10% HA1P-13➁ —
24V AC/DC ±10% HA1P-14➁ —
5V DC ±5% HA2P-11➁ —
12V AC/DC ±10% HA2P-13➁ —
24V AC/DC ±10% HA2P-14➁ —
5V DC ±5% HA3P-11➁ —
12V AC/DC ±10% HA3P-13➁ —
24V AC/DC ±10% HA3P-14➁ —
5V DC ±5% HA4P-11➁ —
12V AC/DC ±10% HA4P-13➁ —
24V AC/DC ±10% HA4P-14➁ —
RoundHA1P
SquareHA2P
Round w/Square BezelHA3P
Square w/Four-sided Barrier HA4P
RoundHA1P
SquareHA2P
Round w/Square BezelHA3P
Square w/Four-sided Barrier HA4P
(06/11/30)
H6 Series Miniature Control Units
10
ø16
Dimensions (Pilot Lights)
ø16.2+0.2
0
24 min.
24 m
in.
1
55
ø1.2 holes
7.85(TOP)
LampTeminal (+)
Lamp Teminal (+)
• X2 and X2 are connected internally.
LampTerminal (–)
LampTerminal (–)
X2
X2
X2
X2
X1
X1
(TOP)(TOP)
Round Square Roundw/Square Bezel
Locking Ring
Anti-rotation Ring
Rubber Gasket
Round
Terminal Width 2.8×0.5tP
OT
Panel Thickness 0.5 to 6
0.6
11
24
Squarew/Four-sided
barrier
ø24
13
23
10 27.5
6
2.6
1.2
24 24
Solder/Tab Terminal Type
Round Square Roundw/Square Bezel
Locking Ring
Anti-rotation Ring
Rubber Gasket
LOCK
TP
O
PC Board Terminal
PC Board Terminal Type Solder/Tab Terminal Type
Terminal Width 2.8×0.5tWidth 0.8×0.5t
LOC
K
CO
M
CO
MNO
NC
CX2
X2
X1
CN
ON
CPanel Thickness 0.5 to 6
0.6
9
10.5 13.5
9 36 11
16
615.8
ø21
17.8
R15.5
15
5
2
5.5 24
ø24
Squarew/4-sided Barrier
7.85
7.8
5
2
2.61.
2
24 24
• Separate Type
• Unibody Type
Mounting Hole LayoutMounting Centers
PC Board Drilling Layout(Bottom View)
Terminal Arrangement (Bottom View)
All dimensions in mm.
PC Board Terminal Type Separate Type Unibody Type
(06/11/30)
H6 Series Miniature Control Units
11
ø16
• Specify a color code in place of ➀ or ➁ in the Type No.• For dimensions, see page 13.
HA1B/HA2B/HA3B/HA4B Pushbuttons
Shape ButtonType
OperationType Contact
Type No.Color Code ➀➁
Solder/Tab Terminal PC Board Terminal
Flu
sh
RoundHA1B- 1
Button
MomentaryGold
SPDT HA1B-M1C1➀ HA1B-M1C1V➀
B: blackG: greenR: redS: blueW: whiteY: yellow
DPDT HA1B-M1C2➀ HA1B-M1C2V➀
SilverSPDT HA1B-M1C5➀ —DPDT HA1B-M1C6➀ —
MaintainedGold
SPDT HA1B-A1C1➀ HA1B-A1C1V➀
DPDT HA1B-A1C2➀ HA1B-A1C2V➀
SilverSPDT HA1B-A1C5➀ —DPDT HA1B-A1C6➀ —
IlluminationLens
MomentaryGold
SPDT HA1B-M1C1L➁ HA1B-M1C1VL➁
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA1B-M1C2L➁ HA1B-M1C2VL➁
SilverSPDT HA1B-M1C5L➁ —DPDT HA1B-M1C6L➁ —
MaintainedGold
SPDT HA1B-A1C1L➁ HA1B-A1C1VL➁
DPDT HA1B-A1C2L➁ HA1B-A1C2VL➁
SilverSPDT HA1B-A1C5L➁ —DPDT HA1B-A1C6L➁ —
SquareHA2B- 1
Button
MomentaryGold
SPDT HA2B-M1C1➀ HA2B-M1C1V➀
B: blackG: greenR: redS: blueW: whiteY: yellow
DPDT HA2B-M1C2➀ HA2B-M1C2V➀
SilverSPDT HA2B-M1C5➀ —DPDT HA2B-M1C6➀ —
MaintainedGold
SPDT HA2B-A1C1➀ HA2B-A1C1V➀
DPDT HA2B-A1C2➀ HA2B-A1C2V➀
SilverSPDT HA2B-A1C5➀ —DPDT HA2B-A1C6➀ —
IlluminationLens
MomentaryGold
SPDT HA2B-M1C1L➁ HA2B-M1C1VL➁
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA2B-M1C2L➁ HA2B-M1C2VL➁
SilverSPDT HA2B-M1C5L➁ —DPDT HA2B-M1C6L➁ —
MaintainedGold
SPDT HA2B-A1C1L➁ HA2B-A1C1VL➁
DPDT HA2B-A1C2L➁ HA2B-A1C2VL➁
SilverSPDT HA2B-A1C5L➁ —DPDT HA2B-A1C6L➁ —
Round w/Square BezelHA3B- 1
Button
MomentaryGold
SPDT HA3B-M1C1➀ HA3B-M1C1V➀
B: blackG: greenR: redS: blueW: whiteY: yellow
DPDT HA3B-M1C2➀ HA3B-M1C2V➀
SilverSPDT HA3B-M1C5➀ —DPDT HA3B-M1C6➀ —
MaintainedGold
SPDT HA3B-A1C1➀ HA3B-A1C1V➀
DPDT HA3B-A1C2➀ HA3B-A1C2V➀
SilverSPDT HA3B-A1C5➀ —DPDT HA3B-A1C6➀ —
IlluminationLens
MomentaryGold
SPDT HA3B-M1C1L➁ HA3B-M1C1VL➁
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA3B-M1C2L➁ HA3B-M1C2VL➁
SilverSPDT HA3B-M1C5L➁ —DPDT HA3B-M1C6L➁ —
MaintainedGold
SPDT HA3B-A1C1L➁ HA3B-A1C1VL➁
DPDT HA3B-A1C2L➁ HA3B-A1C2VL➁
SilverSPDT HA3B-A1C5L➁ —DPDT HA3B-A1C6L➁ —
Squarew/Four-sided BarrierHA4B-M1 Button Momentary
GoldSPDT HA4B-M1C1➀ HA4B-M1C1V➀ B: black
G: greenR: redS: blueW: whiteY: yellow
DPDT HA4B-M1C2➀ HA4B-M1C2V➀
SilverSPDT HA4B-M1C5➀ —
DPDT HA4B-M1C6➀ —
IlluminationLens Maintained
GoldSPDT HA4B-M1C1L➁ HA4B-M1C1VL➁ A: amber
G: greenR: redS: blueW: whiteY: yellow
DPDT HA4B-M1C2L➁ HA4B-M1C2VL➁
SilverSPDT HA4B-M1C5L➁ —
DPDT HA4B-M1C6L➁ —
(06/11/30)
H6 Series Miniature Control Units
12
ø16
• Specify a color code in place of ➀ in the Type No.• For dimensions, see page 13.
HA1B/HA2B/HA3B/HA4B Pushbuttons
Shape ButtonType
OperationType Contact
Type No.Color Code ➀
Solder/Tab Terminal PC Board Terminal
Ext
end
ed
RoundHA1B- 2
Button
Momentary
GoldSPDT HA1B-M2C1➀ HA1B-M2C1V➀
B: blackG: greenR: redS: blueW: whiteY: yellow
DPDT HA1B-M2C2➀ HA1B-M2C2V➀
SilverSPDT HA1B-M2C5➀ —
DPDT HA1B-M2C6➀ —
Maintained
GoldSPDT HA1B-A2C1➀ HA1B-A2C1V➀
DPDT HA1B-A2C2➀ HA1B-A2C2V➀
SilverSPDT HA1B-A2C5➀ —
DPDT HA1B-A2C6➀ —SquareHA2B- 2
Momentary
GoldSPDT HA2B-M2C1➀ HA2B-M2C1V➀
DPDT HA2B-M2C2➀ HA2B-M2C2V➀
SilverSPDT HA2B-M2C5➀ —
DPDT HA2B-M2C6➀ —
Maintained
GoldSPDT HA2B-A2C1➀ HA2B-A2C1V➀
DPDT HA2B-A2C2➀ HA2B-A2C2V➀
SilverSPDT HA2B-A2C5➀ —
DPDT HA2B-A2C6➀ —
Round w/Square BezelHA3B- 2
Momentary
GoldSPDT HA3B-M2C1➀ HA3B-M2C1V➀
DPDT HA3B-M2C2➀ HA3B-M2C2V➀
SilverSPDT HA3B-M2C5➀ —
DPDT HA3B-M2C6➀ —
Maintained
GoldSPDT HA3B-A2C1➀ HA3B-A2C1V➀
DPDT HA3B-A2C2➀ HA3B-A2C2V➀
SilverSPDT HA3B-A2C5➀ —
DPDT HA3B-A2C6➀ —Squarew/Four-sided BarrierHA4B-M2
Momentary
Gold
SPDT HA4B-M2C1➀ HA4B-M2C1V➀
DPDT HA4B-M2C2➀ HA4B-M2C2V➀
Silver
SPDT HA4B-M2C5➀ —
DPDT HA4B-M2C6➀ —
ø30
mm
Mu
shro
om
RoundHA1B- 3
Momentary
GoldSPDT HA1B-M3C1➀ HA1B-M3C1V➀
DPDT HA1B-M3C2➀ HA1B-M3C2V➀
SilverSPDT HA1B-M3C5➀ —
DPDT HA1B-M3C6➀ —
Maintained
GoldSPDT HA1B-A3C1➀ HA1B-A3C1V➀
DPDT HA1B-A3C2➀ HA1B-A3C2V➀
SilverSPDT HA1B-A3C5➀ —
DPDT HA1B-A3C6➀ —
(06/11/30)
H6 Series Miniature Control Units
13
ø16
Dimensions (Pushbuttons)
Locking Ring
Anti-rotarion Ring
Rubber Gasket
LOCK
OT
P
LOC
K
NC
NC
CN
O
CN
O
1.45
6.8
0.6
9
10.5 13.5
9
2.6
36 11
16
61.
2
15.8
ø21
17.8
R15.5
15
5
2
5.5
6.8
1.45
24
ø24
PC Board Terminal Type Solder/Tab Terminal Type
Round Square Roundw/Square Bezel
Squarew/4-sided Barrier
PC Board TerminalWidth 0.8×0.5t Terminal Width 2.8×0.5t
Panel Thickness 0.5 to 6
24 24
Extended
ø30mm Mushroom
20
ø30
11
11
15.120
ø16.2+0.2
0
24 min∗
24 m
in.∗
∗ 35 min. for mushroom type
1.456.8
(TOP)
1
55
ø1.2 holes
NC
NO
C
NC
NO
C
(TOP)
Mounting Hole LayoutMounting Centers
PC Board Drilling Layout(Bottom View)
Terminal Arrangement (Bottom View)
PC Board Terminal Type
• SPDT has C, NO, and NC on the right only.
Note: Determine mounting centers to ensure easy operation.
All dimensions in mm.
(06/11/30)
H6 Series Miniature Control Units
14
ø16
• Bezel: black• Knob: black with white indicator• See page 15 for dimensions.
Contact Operation
HA1S/HA3S Selector Switches
Shape Operator Position Operation Type Contact
Type No.
Solder/Tab Terminal
PC Board Terminal
RoundHA1S
90°2-position
Maintained
GoldSPDT HA1S-2C1 HA1S-2C1V
DPDT HA1S-2C2 HA1S-2C2V
SilverSPDT HA1S-2C5 —
DPDT HA1S-2C6 —
Spring returnfrom right
GoldSPDT HA1S-21C1 HA1S-21C1V
DPDT HA1S-21C2 HA1S-21C2V
SilverSPDT HA1S-21C5 —
DPDT HA1S-21C6 —
45°3-position
MaintainedGold DPDT HA1S-3C2 HA1S-3C2V
Silver DPDT HA1S-3C6 —
Spring returnfrom right
Gold DPDT HA1S-31C2 HA1S-31C2V
Silver DPDT HA1S-31C6 —
Spring returnfrom left
Gold DPDT HA1S-32C2 HA1S-32C2V
Silver DPDT HA1S-32C6 —
Spring returntwo-way
Gold DPDT HA1S-33C2 HA1S-33C2V
Silver DPDT HA1S-33C6 —
Round w/Square BezelHA3S
90°2-position
Maintained
GoldSPDT HA3S-2C1 HA3S-2C1V
DPDT HA3S-2C2 HA3S-2C2V
SilverSPDT HA3S-2C5 —
DPDT HA3S-2C6 —
Spring returnfrom right
GoldSPDT HA3S-21C1 HA3S-21C1V
DPDT HA3S-21C2 HA3S-21C2V
SilverSPDT HA3S-21C5 —
DPDT HA3S-21C6 —
45°3-position
MaintainedGold DPDT HA3S-3C2 HA3S-3C2V
Silver DPDT HA3S-3C6 —
Spring returnfrom right
Gold DPDT HA3S-31C2 HA3S-31C2V
Silver DPDT HA3S-31C6 —
Spring returnfrom left
Gold DPDT HA3S-32C2 HA3S-32C2V
Silver DPDT HA3S-32C6 —
Spring returntwo-way
Gold DPDT HA3S-33C2 HA3S-33C2V
Silver DPDT HA3S-33C6 —
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
90° 2-position
SPDT —
DPDT —
45° 3-position DPDT
L R
L R
LC
R
LC
R
RLC
LC
R
L R
L R
LC
R
LC
R
RLC
LC
R
Maintained Spring return from right
L R L R
NO
C
NC NO
C
NC
Left ContactNO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
Maintained Spring returnfrom right
Spring return
LC
R RLC
LC
R
Spring returnfrom left
LC
R
two-way
NO
C
NC NO
C
NCLeft Contact Right Contact Left Contact
NO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
(06/11/30)
H6 Series Miniature Control Units
15
ø16
Dimensions (Selector Switch)
Round Roundw/Square Bezel
Locking Ring
Anti-rotation Ring
Rubber Gasket
Right Contact
Left Contact
LOCK
Panel Thickness 0.5 to 6
Width 0.8×0.5tPC Board Terminal
PC Board Terminal Type Solder/Tab Terminal Type
Terminal Width 2.8×0.5t
OP
T
LOC
K
NC
NC
CN
O
CN
O
1.45
6.8
11.
2
6615
.8
ø21
17.8
R15.5
1
55
2
5.5
6.8
1.45
ø24
0.6
10.5 13.5 11
9
2.6
36 19.5 24
ø16.2+0.20
24 min.
24 m
in.
1.45
6.8
1
55
ø1.2 holes
(TOP)
NC
NO
C
NC
NO
C
(TOP)
Mounting Hole LayoutMounting Centers
PC Board Drilling Layout(Bottom View)
Terminal Arrangement (Bottom View)
• SPDT has C, NO, and NC on the right only.Note: Determine mounting centers to ensure easy operation.
All dimensions in mm.
(06/11/30)
H6 Series Miniature Control Units
16
ø16
• Two keys are supplied. • The front of key cylinder is made of black plastic. • See page 18 for dimensions.
Contact Operation
HA1K Key Selector Switches
Shape Operator Position Keys Retainedat ���� Contact
Type No.Solder/Tab Terminal PC Board Terminal
RoundHA1K
90°2-position
Maintained
AGold
SPDT HA1K-2C1A HA1K-2C1VADPDT HA1K-2C2A HA1K-2C2VA
SilverSPDT HA1K-2C5A —DPDT HA1K-2C6A —
BGold
SPDT HA1K-2C1B HA1K-2C1VBDPDT HA1K-2C2B HA1K-2C2VB
SilverSPDT HA1K-2C5B —DPDT HA1K-2C6B —
CGold
SPDT HA1K-2C1C HA1K-2C1VCDPDT HA1K-2C2C HA1K-2C2VC
SilverSPDT HA1K-2C5C —DPDT HA1K-2C6C —
Spring returnfrom right B
Gold SPDT HA1K-21C1B HA1K-21C1VBSilver DPDT HA1K-21C2B HA1K-21C2VBGold SPDT HA1K-21C5B —Silver DPDT HA1K-21C6B —
45°3-position
Maintained
AGold DPDT HA1K-3C2A HA1K-3C2VASilver DPDT HA1K-3C6A —
BGold DPDT HA1K-3C2B HA1K-3C2VBSilver DPDT HA1K-3C6B —
CGold DPDT HA1K-3C2C HA1K-3C2VCSilver DPDT HA1K-3C6C —
DGold DPDT HA1K-3C2D HA1K-3C2VDSilver DPDT HA1K-3C6D —
EGold DPDT HA1K-3C2E HA1K-3C2VESilver DPDT HA1K-3C6E —
GGold DPDT HA1K-3C2G HA1K-3C2VGSilver DPDT HA1K-3C6G —
HGold DPDT HA1K-3C2H HA1K-3C2VHSilver DPDT HA1K-3C6H —
Spring returnfrom right
BGold DPDT HA1K-31C2B HA1K-31C2VBSilver DPDT HA1K-31C6B —
DGold DPDT HA1K-31C2D HA1K-31C2VDSilver DPDT HA1K-31C6D —
GGold DPDT HA1K-31C2G HA1K-31C2VGSilver DPDT HA1K-31C6G —
Spring returnfrom left
CGold DPDT HA1K-32C2C HA1K-32C2VCSilver DPDT HA1K-32C6C —
DGold DPDT HA1K-32C2D HA1K-32C2VDSilver DPDT HA1K-32C6D —
HGold DPDT HA1K-32C2H HA1K-32C2VHSilver DPDT HA1K-32C6H —
Spring return two-way D
Gold DPDT HA1K-33C2D HA1K-33C2VDSilver DPDT HA1K-33C6D —
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
90° 2-position
SPDT —
DPDT —
45° 3-position DPDT
L R
L R
L R
L R
LC
R
LC
R
CRL
RLC
L RC
LC
R
CL R
CL R
CRL
LC
R
CRL
CRL
CL R
CRL
Maintained Spring return from right
L R L R
NO
C
NC NO
C
NC
Left ContactNO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
Maintained Spring returnfrom right
Spring return
LC
R RLC
LC
R
Spring returnfrom left
LC
R
two-way
NO
C
NC NO
C
NCLeft Contact Right Contact Left Contact
NO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
(06/11/30)
H6 Series Miniature Control Units
17
ø16
• Two keys are supplied. • The front of key cylinder is made with black plastic. • See page 18 for dimensions.
Contact Operation
HA3K Key Selector Switches
Shape Operator Position Keys Retainedat ���� Contact
Type No.Solder/Tab Terminal PC Board Terminal
Round w/Square BezelHA3K
90°2-position
Maintained
AGold
SPDT HA3K-2C1A HA3K-2C1VADPDT HA3K-2C2A HA3K-2C2VA
SilverSPDT HA3K-2C5A —DPDT HA3K-2C6A —
BGold
SPDT HA3K-2C1B HA3K-2C1VBDPDT HA3K-2C2B HA3K-2C2VB
SilverSPDT HA3K-2C5B —DPDT HA3K-2C6B —
CGold
SPDT HA3K-2C1C HA3K-2C1VCDPDT HA3K-2C2C HA3K-2C2VC
SilverSPDT HA3K-2C5C —DPDT HA3K-2C6C —
Spring returnfrom right B
Gold SPDT HA3K-21C1B HA3K-21C1VBSilver DPDT HA3K-21C2B HA3K-21C2VBGold SPDT HA3K-21C5B —Silver DPDT HA3K-21C6B —
45°3-position
Maintained
AGold DPDT HA3K-3C2A HA3K-3C2VASilver DPDT HA3K-3C6A —
BGold DPDT HA3K-3C2B HA3K-3C2VBSilver DPDT HA3K-3C6B —
CGold DPDT HA3K-3C2C HA3K-3C2VCSilver DPDT HA3K-3C6C —
DGold DPDT HA3K-3C2D HA3K-3C2VDSilver DPDT HA3K-3C6D —
EGold DPDT HA3K-3C2E HA3K-3C2VESilver DPDT HA3K-3C6E —
GGold DPDT HA3K-3C2G HA3K-3C2VGSilver DPDT HA3K-3C6G —
HGold DPDT HA3K-3C2H HA3K-3C2VHSilver DPDT HA3K-3C6H —
Spring returnfrom right
BGold DPDT HA3K-31C2B HA3K-31C2VBSilver DPDT HA3K-31C6B —
DGold DPDT HA3K-31C2D HA3K-31C2VDSilver DPDT HA3K-31C6D —
GGold DPDT HA3K-31C2G HA3K-31C2VGSilver DPDT HA3K-31C6G —
Spring returnfrom left
CGold DPDT HA3K-32C2C HA3K-32C2VCSilver DPDT HA3K-32C6C —
DGold DPDT HA3K-32C2D HA3K-32C2VDSilver DPDT HA3K-32C6D —
HGold DPDT HA3K-32C2H HA3K-32C2VHSilver DPDT HA3K-32C6H —
Spring return two-way D
Gold DPDT HA3K-33C2D HA3K-33C2VDSilver DPDT HA3K-33C6D —
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
90° 2-position
SPDT —
DPDT —
45° 3-position DPDT
L R
L R
L R
L R
LC
R
LC
R
CRL
RLC
L RC
LC
R
CL R
CL R
CRL
LC
R
CRL
CRL
CL R
CRL
Maintained Spring return from right
L R L R
NO
C
NC NO
C
NC
Left ContactNO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
Maintained Spring returnfrom right
Spring return
LC
R RLC
LC
R
Spring returnfrom left
LC
R
two-way
NO
C
NC NO
C
NCLeft Contact Right Contact Left Contact
NO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
(06/11/30)
H6 Series Miniature Control Units
18
ø16
Dimensions (Key Selector Switch)
Round Roundw/Square Bezel
Locking Ring
Anti-rotation Ring
Rubber Gasket
LOCK
Panel Thickness 0.5 to 6
Width 0.8×0.5tPC Board Terminal
Terminal Width 2.8×0.5t
TO
P
LOC
K
NC
NC
CN
O
CN
O
1.45
6.8
1
6615
.8
ø21
17.8
R15.5
1
55
2
5.5
6.8
1.45
ø24
0.6
10.5 13.5
9 36 24
12.5
39
PC Board Terminal Type Solder/Tab Terminal Type
Right Contact
Left Contact
2.6
1.2
1.45
6.8
1
55
ø1.2 holes
(TOP)
NC
NO
C
NC
NO
C
(TOP)ø16.2+0.20
24 min.
24 m
in.
Mounting Hole LayoutMounting Centers
PC Board Drilling Layout(Bottom View)
Terminal Arrangement (Bottom View)
• SPDT has C, NO, and NC on the right only.
Note: Determine mounting centers to ensure easy operation.
All dimensions in mm.
(06/11/30)
H6 Series Miniature Control Units
19
ø16
• See page 21 for dimensions.
Contact Operation
HA1F LED Illuminated Selector Switches
Shape Operator Position
ContactMaterial
OperatingVoltage Contact
Type No.Color Code ➁
Solder/Tab Terminal PC Board Terminal
RoundHA1F
90°
2-po
sitio
n
Maintained
Gold
5V DC ±5%SPDT HA1F-2C11➁ HA1F-2C11V➁
Specify a lens color code in place of ➁ in the Type No.
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA1F-2C21➁ HA1F-2C21V➁
12V AC/DC ±10%SPDT HA1F-2C13➁ HA1F-2C13V➁
DPDT HA1F-2C23➁ HA1F-2C23V➁
24V AC/DC ±10%SPDT HA1F-2C14➁ HA1F-2C14V➁
DPDT HA1F-2C24➁ HA1F-2C24V➁
Silver
5V DC ±5%SPDT HA1F-2C51➁
—
DPDT HA1F-2C61➁
12V AC/DC ±10%SPDT HA1F-2C53➁
DPDT HA1F-2C63➁
24V AC/DC ±10%SPDT HA1F-2C54➁
DPDT HA1F-2C64➁
Spring returnfrom right
Gold
5V DC ±5%SPDT HA1F-21C11➁ HA1F-21C11V➁
DPDT HA1F-21C21➁ HA1F-21C21V➁
12V AC/DC ±10%SPDT HA1F-21C13➁ HA1F-21C13V➁
DPDT HA1F-21C23➁ HA1F-21C23V➁
24V AC/DC ±10%SPDT HA1F-21C14➁ HA1F-21C14V➁
DPDT HA1F-21C24➁ HA1F-21C24V➁
Silver
5V DC ±5%SPDT HA1F-21C51➁
—
DPDT HA1F-21C61➁
12V AC/DC ±10%SPDT HA1F-21C53➁
DPDT HA1F-21C63➁
24V AC/DC ±10%SPDT HA1F-21C54➁
DPDT HA1F-21C64➁
45°
3-po
sitio
n
Maintained Gold5V DC ±5% DPDT HA1F-3C21➁ HA1F-3C21V➁
12V AC/DC ±10% DPDT HA1F-3C23➁ HA1F-3C23V➁
24V AC/DC ±10% DPDT HA1F-3C24➁ HA1F-3C24V➁
Silver5V DC ±5% DPDT HA1F-3C61➁
—12V AC/DC ±10% DPDT HA1F-3C63➁
24V AC/DC ±10% DPDT HA1F-3C64➁
Spring returnfrom right
Gold5V DC ±5% DPDT HA1F-31C21➁ HA1F-31C21V➁
12V AC/DC ±10% DPDT HA1F-31C23➁ HA1F-31C23V➁
24V AC/DC ±10% DPDT HA1F-31C24➁ HA1F-31C24V➁
Silver5V DC ±5% DPDT HA1F-31C61➁
—12V AC/DC ±10% DPDT HA1F-31C63➁
24V AC/DC ±10% DPDT HA1F-31C64➁
Spring returnfrom left
Gold5V DC ±5% DPDT HA1F-32C21➁ HA1F-32C21V➁
12V AC/DC ±10% DPDT HA1F-32C23➁ HA1F-32C23V➁
24V AC/DC ±10% DPDT HA1F-32C24➁ HA1F-32C24V➁
Silver5V DC ±5% DPDT HA1F-32C61➁
—12V AC/DC ±10% DPDT HA1F-32C63➁
24V AC/DC ±10% DPDT HA1F-32C64➁
Spring returntwo-way
Gold5V DC ±5% DPDT HA1F-33C21➁ HA1F-33C21V➁
12V AC/DC ±10% DPDT HA1F-33C23➁ HA1F-33C23V➁
24V AC/DC ±10% DPDT HA1F-33C24➁ HA1F-33C24V➁
Silver5V DC ±5% DPDT HA1F-33C61➁
—12V AC/DC ±10% DPDT HA1F-33C63➁
24V AC/DC ±10% DPDT HA1F-33C64➁
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
90° 2-position
SPDT —
DPDT —
45° 3-position DPDT
L R
L R
LC
R
LC
R
RLC
LC
R
Maintained Spring return from right
L R L R
NO
C
NC NO
C
NC
Left ContactNO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
Maintained Spring returnfrom right
Spring return
LC
R RLC
LC
R
Spring returnfrom left
LC
R
two-way
NO
C
NC NO
C
NCLeft Contact Right Contact Left Contact
NO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
(06/11/30)
H6 Series Miniature Control Units
20
ø16
• See page 21 for dimensions.
Contact Operation
HA3F LED Illuminated Selector Switches
Shape Operator Position
ContactMaterial
OperatingVoltage Contact
Type No.Color Code ➁
Solder/Tab Terminal PC Board Terminal
Roundw/Square BezelHA3F
90°
2-po
sitio
n
Maintained
Gold
5V DC ±5%SPDT HA3F-2C11➁ HA3F-2C11V➁
Specify a lens color code in place of ➁ in the Type No.
A: amberG: greenR: redS: blueW: whiteY: yellow
DPDT HA3F-2C21➁ HA3F-2C21V➁
12V AC/DC ±10%SPDT HA3F-2C13➁ HA3F-2C13V➁
DPDT HA3F-2C23➁ HA3F-2C23V➁
24V AC/DC ±10%SPDT HA3F-2C14➁ HA3F-2C14V➁
DPDT HA3F-2C24➁ HA3F-2C24V➁
Silver
5V DC ±5%SPDT HA3F-2C51➁
—
DPDT HA3F-2C61➁
12V AC/DC ±10%SPDT HA3F-2C53➁
DPDT HA3F-2C63➁
24V AC/DC ±10%SPDT HA3F-2C54➁
DPDT HA3F-2C64➁
Spring returnfrom right
Gold
5V DC ±5%SPDT HA3F-21C11➁ HA3F-21C11V➁
DPDT HA3F-21C21➁ HA3F-21C21V➁
12V AC/DC ±10%SPDT HA3F-21C13➁ HA3F-21C13V➁
DPDT HA3F-21C23➁ HA3F-21C23V➁
24V AC/DC ±10%SPDT HA3F-21C14➁ HA3F-21C14V➁
DPDT HA3F-21C24➁ HA3F-21C24V➁
Silver
5V DC ±5%SPDT HA3F-21C51➁
—
DPDT HA3F-21C61➁
12V AC/DC ±10%SPDT HA3F-21C53➁
DPDT HA3F-21C63➁
24V AC/DC ±10%SPDT HA3F-21C54➁
DPDT HA3F-21C64➁
45°
3-po
sitio
n
Maintained Gold5V DC ±5% DPDT HA3F-3C21➁ HA3F-3C21V➁
12V AC/DC ±10% DPDT HA3F-3C23➁ HA3F-3C23V➁
24V AC/DC ±10% DPDT HA3F-3C24➁ HA3F-3C24V➁
Silver5V DC ±5% DPDT HA3F-3C61➁
—12V AC/DC ±10% DPDT HA3F-3C63➁
24V AC/DC ±10% DPDT HA3F-3C64➁
Spring returnfrom right
Gold5V DC ±5% DPDT HA3F-31C21➁ HA3F-31C21V➁
12V AC/DC ±10% DPDT HA3F-31C23➁ HA3F-31C23V➁
24V AC/DC ±10% DPDT HA3F-31C24➁ HA3F-31C24V➁
Silver5V DC ±5% DPDT HA3F-31C61➁
—12V AC/DC ±10% DPDT HA3F-31C63➁
24V AC/DC ±10% DPDT HA3F-31C64➁
Spring returnfrom left
Gold5V DC ±5% DPDT HA3F-32C21➁ HA3F-32C21V➁
12V AC/DC ±10% DPDT HA3F-32C23➁ HA3F-32C23V➁
24V AC/DC ±10% DPDT HA3F-32C24➁ HA3F-32C24V➁
Silver5V DC ±5% DPDT HA3F-32C61➁
—12V AC/DC ±10% DPDT HA3F-32C63➁
24V AC/DC ±10% DPDT HA3F-32C64➁
Spring return two-way
Gold5V DC ±5% DPDT HA3F-33C21➁ HA3F-33C21V➁
12V AC/DC ±10% DPDT HA3F-33C23➁ HA3F-33C23V➁
24V AC/DC ±10% DPDT HA3F-33C24➁ HA3F-33C24V➁
Silver5V DC ±5% DPDT HA3F-33C61➁
—12V AC/DC ±10% DPDT HA3F-33C63➁
24V AC/DC ±10% DPDT HA3F-33C64➁
Operator Position & Contact Operation (Top View)
Positions Contact Left Center Right
90° 2-position
SPDT —
DPDT —
45° 3-position DPDT
L R
L R
LC
R
LC
R
RLC
LC
R
Maintained Spring return from right
L R L R
NO
C
NC NO
C
NC
Left ContactNO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
Maintained Spring returnfrom right
Spring return
LC
R RLC
LC
R
Spring returnfrom left
LC
R
two-way
NO
C
NC NO
C
NCLeft Contact Right Contact Left Contact
NO
C
NCRight ContactNO
C
NC NO
C
NC NO
C
NCLeft Contact Right Contact
(06/11/30)
H6 Series Miniature Control Units
21
ø16
Dimensions (Illuminated Selector Switch)
RoundRoundw/Square Bezel
Locking Ring
Anti-rotation Ring
Rubber Gasket
LOCK
TP
O
Width 0.8×0.5tPC Board Terminal
Anti-rotation Riing 2.8×0.5t
LOC
K
NO
NC
CX2
X2
X1
CN
ON
C
1.45
6.4
6.8
Panel Tshickness 0.5 to 6
0.6
10.5 13.5
2.6
36
111
66
1.2
15.8
ø21
17.8
R15.5
1
55
2
5.5
6.4
6.8
1.45
24ø2419.5
Solder/Tab Terminal TypePC Board Terminal Type
Right Contact
Left Contact
9
ø16.2+0.20
24 min.
24 m
in.
1.45
6.4 6.8
1
55
ø1.2 holes
(TOP)
NC
NO
C
NC
NO
C
X1
X2
X2
Lamp Termina l (+)
Lamp Terminal (–)
(TOP)
Mounting Hole LayoutMounting Centers
PC Board Drilling Layout(Bottom View)
Terminal Arrangement (Bottom View)
• SPDT has C, NO, and NC on the right only.• X2 and X2 are wired internally.Note: Determine mounting centers to ensure
easy operation.
Note: For details, see page 30 about oneboard mounting.
All dimensions in mm.
(06/11/30)
H6 Series Miniature Control Units
22
ø16
• Specify a button color code in place of ➀ in the Type No.
Dimensions
HA1R Selector Pushbuttons
Shape OperatorPosition
Contact Operation
ContactMaterial Contact Type No.
Terminal TypeColor Code
➀L C R
Normal Push Normal Push Normal Push
RoundHA1R
90°
2-po
sitio
n
Mai
ntai
ned
— —
Gold DPDT
Solder Tab TerminalHA1R-2C2➀
B: blackG: greenR: redS: blueY: yellow
PC Board TerminalHA1R-2C2V➀
Silver DPDT
Solder Tab TerminalHA1R-2C6➀
—
45°
3-po
sitio
n
Blocked
Gold DPDT
Solder Tab TerminalHA1R-3C2➀
PC Board TerminalHA1R-3C2V➀
Silver DPDT
Solder Tab TerminalHA1R-3C6➀
—
LeftContactNO
C
NC
RightContactNO
C
NC NO
C
NC NO
C
NC
LeftContact
RightContact
LeftContactNO
C
NC
RightContactNO
C
NC NO
C
NC NO
C
NC
LeftContact
RightContact
LeftContactNO
C
NC
RightContactNO
C
NC NO
C
NC NO
C
NC
LeftContact
RightContact
LeftContactNO
C
NC
RightContactNO
C
NC
LeftContactNO
C
NC
RightContactNO
C
NC NO
C
NC NO
C
NC
LeftContact
RightContact
LOCK
NO
C
NC
NC
CN
O
15.8
ø21
17.8
R15.5
Locking Ring
Anti-rotation Ring
Rubber Gasket
Panel Thickness 0.5 to 6
Width 0.8×0.5tPC Board Terminal
Terminal Width 2.8×0.5t
TO
P
LOC
K
1.45
6.8
1
66
1
55
2
5.5
6.8
1.45
0.6
10.5 13.5
9
2.6
1.2
36 20
ø25R14
Solder/Tab Terminal TypePC Board Terminal Type
Right Contact
Left Contact
ø16.2+0.2
0
35 min.
35 m
in.
1.45
6.8
1
55
ø1.2 holes
(TOP)
NC
NO
C
NC
NO
C
(TOP)
Mounting Hole LayoutMounting Centers
PC Board Panel Cut-out(Bottom View)
Terminal Arrangement (Bottom View)
Note: Determine mounting centers to ensure easy operation.
Note: For details, see page 30 about oneboard mounting.
All dimensions in mm.
(06/11/30)
H6 Series Miniature Control Units
23
ø16
Accessories
Shape Material Type No. OrderingType No.
PackageQuantity Dimensions (mm)
Locking Ring WrenchMetal(nickel-plated brass)
MT-001 MT-001 1
• Used to tighten the locking ring when installing H6 control units into a panel.
• Tighten the locking ring to a torque of 0.88 N·m.
Lamp Holder Tool
Rubber OR-44 OR-44 1 • Used to install and remove LED lamps.
Lens Removal Tool
Stainless Steel MT-101 MT-101 1 • Used to remove the lens or buttons.
Switch Guard(180° spring return)
StandardGuard(Polyarylate)Base(polyacetal)
HA9Z-K1 HA9Z-K1 1
• Degree of protection: IP65• Used to protect flush pushbuttons from
inadvertent operation.
For oneboard HA9Z-KW1 HA9Z-KW1 1
Terminal Cover
Standard
Nylon
H6-VL2 H6-VL2PN10 10
• Terminal cover is not attached and must be ordered separately.
• When wiring the terminals, insert the lead wires into the terminal cover holes before soldering.
Exclusive forUnibodyPilot Light
H6-PVL H6-PVLPN10 10
Mounting Hole Plug
Rubber
NitrylRubber (black)
AL-B6 AL-B6PN05 5
• Degree of protection: IP65
Metal
Metal (diecast)Locking ring(plastic)
AL-BM6 AL-BM6 1
• Degree of protection: IP65
ø18
60
ø6.660
ø7.5
60
Spr
ing
Ret
urn
TOP marking
17.6
4
211516
.3
18.2
14
H6-VL2
H6-PVL
0+0.2
ø16.2
Mounting Hole
2 6
ø16
.5
ø18
Locking Ring
Panel Thickness 0.5 to 6
Gasket
2.5 12
ø17
.8
0+0.2
ø16.2
Mounting Hole
(06/11/30)
H6 Series Miniature Control Units
24
ø16
Maintenance Parts
Shape Specification Type No. Ordering Type No. PackageQuantity Color Code ➀➁
Lens Round,Round w/Square Bezel
Polyarylate
HA9Z-L11➁ HA9Z-L11➁PN05
5
Specify a color code in place of ➁ in the Type No.
A (amber), G (green),R (red), S (blue), W (white),Y (yellow)
Square HA9Z-L21➁ HA9Z-L21➁PN05
ø30mm Lens HA9Z-L13➁ HA9Z-L13➁PN05
Button Round Flush,Round w/Square Bezel
Polyacetal
HA9Z-B11➀ HA9Z-B11➀PN05
Specify a color code in place of ➀ in the Type No.
B (black), G (green), R (red),S (blue), W (white), Y (yellow)
Square Flush HA9Z-B21➀ HA9Z-B21➀PN05
Round Extended,Round Extendedw/Square Bezel
HA9Z-B12➀ HA9Z-B12➀PN05
Square Extended HA9Z-B22➀ HA9Z-B22➀PN05
ø30mm Button HA9Z-B13➀ HA9Z-B13➀PN05
Marking Plate Round,Round w/Square Bezel
Acrylic HA9Z-P1W HA9Z-P1WPN05• White• HA9Z-P1W
(engraving area: ø16.4 mm, engraving depth: 0.5 mm max.)
• HA9Z-P2W(engraving area: 16.4 mm, engraving depth: 0.5 mm max.)
Square Acrylic HA9Z-P2W HA9Z-P2WPN05
Locking Ring
For all types Plastic HA9Z-LN HA9Z-LNPN10 10
Anti-rotation RingFor all types except for HA1E
Stainless Steel HA9Z-LP HA9Z-LPPN10
5
Lever Lock For all types except for collec-tive mounting and HA1E
Polyacetal HA9Z-LS HA9Z-LSPN10• Lever lock is not attached and
must be ordered separately.• Yellow
Selector Color Insert
For selector switch Polyacetal HA9Z-HC1➀ HA9Z-HC1➀PN05
Specify a color code in place of ➀ in the Type No.
G (green), R (red),S (blue), W (white), Y (yellow)
Spare Key
For key selector switches
Nickel-plated Brass KG9Z-SK-231 KG9Z-SK-231PN02 2
• Thickness: 2.0mm• Two keys of the same number.
Different key numbers are not available.
IlluminatedSelector Knob
For illuminated selector switch
Polyarylate(w/water-proof gasket)
HA1A-F➁ HA1A-F➁ 1
Specify a color code in place of ➁ in the Type No.
A (amber), G (green),R (red), S (blue), W (white),Y (yellow)
(06/11/30)
H6 Series Miniature Control Units
25
ø16
• Terminal covers are supplied with separate mounting type transformers.• Connect only one LFTD LED to separate mounting type transformers.• Use plastic mounting clip BC9Z-E/NS35N when using 400/440V primary voltage.
Specifications
Accessories
• Use plastic mounting clip BC9Z-E/NS35N when using 400/440V primary voltage.
LED Lamps
Operating VoltageCurrent Draw
Type No. OrderingType No.
➁ IlluminationColor Code
PackageQuantity Base
AC DC5V DC ±5%
— 8 mA LFTD-5➁LFTD-5➁
Specify a color code in place of ➁ in the Ordering Type No.
A: amberG: greenR: redS: blueW: whiteY: yellow
1
SX6S/8×5.4
LFTD-5➁PN10 10
12V AC/DC ±10%
9 mA 8 mA LFTD-1➁
LFTD-1➁ 1
LFTD-1➁PN10 10
24V AC/DC ±10%
9 mA 8 mA LFTD-2➁LFTD-2➁ 1
LFTD-2➁PN10 10
Transformer
Shape Primary Voltage Secondary Voltage Type No. Applicable LED LampSeparate Mounting Type for 24V 100/110V AC
24V AC, 0.5W
TWR512
LFTD-2➁200/220V AC TWR522
400/440V AC TWR542
Operating Voltage 100/110V AC, 200/220V AC,400/440V AC (50/60 Hz)
Power Consumption 2.4VARated Insulation Voltage 600VInsulation Resistance 100 MΩ minimum (500V DC megger)Dielectric Strength 2500V AC, 1 minute
StandardOperating Condition
OperatingTemperature –30 to +60°C (no freezing)
Relative Humidity 35 to 85% (no condensation)
Vibration Resistance OperatingExtremes 5 to 55 Hz, amplitude 0.5 mm
Shock Resistance Damage Limits 1,000 m/s2 (100G)Terminal Screw M3.5Applicable Wire 2 mm2 maximum, 2 wires maximum
Description Appearance Description Type No. Ordering Type No. PackageQuantity
DIN Rail
AluminumWeight: Approx. 200g BAA1000 BAA1000PN10
10
SteelWeight: Approx. 320g BAP1000 BAP1000PN10
Mounting Clip
SteelWeight: Approx.15g
BNL6 BNL6PN10
PlasticWeight: Approx.15g
BC9Z-E/NS35N BC9Z-E/NS35NPN10
Dimensions
524140
4840
Secondary Side
TerminalCover
M3.5 Terminal Screws
Primary Side
Mounting Holes2-ø3.3
22 30
All dimensions in mm.
459
32.8
48.69.5
(06/11/30)
H6 Series Miniature Control Units
26
ø16
Dimensions
• Terminal Cover
• Switch Guard
Maintenance Parts
For Separate Type (except for unibody type pilot lights) For Unibody Type Pilot Lights
(H6-VL2)
15
47 39.5
18.2
14
ø16
.3
(H6-PVL)
For Flush Pushbuttons and Illuminated Pushbuttons
All dimensions in mm.
Panel thickness 0.5 to 5
Panel thickness 0.5 to 6
41.2
R27.4
24
25 minimum
(HA9Z-K1)
(HA9Z-KW1)
57 m
inim
um
29
15 0.4
41
41.2
R27.4
13.9
39.5
(06/11/30)
27
H6 Series Emergency Stop Switches
IDEC’s Unique safety lock mechanism. Ideal for emergency stop of machine tools.
Short 28.5-mm-long emergency stop switch suitable for installing on teaching pendants.
H6 Emergency Stop Switches
HA1B Emergency Stop Switch (Pushlock Turn Reset)
HA1E Series Short Body Emergency Stop Switch (Pushlock Turn Reset)
Contact Ratings
Minimum applicable load (reference value): 3V AC/DC, 5 mA(Applicable range is subject to the operating condition and load.)
Contact Ratings
SpecificationsRated Insulation Voltage (Ui) 250V
Rated Thermal Current (Ith) 10A
Rated Operating Voltage (Ue) 30V 125V 250V
RatedOperatingCurrent
AC50/60 Hz
Resistive Load(AC-12) — 5A 3A
Inductive Load(AC-15) — 3A 1.5A
DC
Resistive Load(DC-12) 2A 0.4A 0.2A
Inductive Load(DC-13) 1A 0.22A 0.1A
Applicable Standard File No. or Organization
UL508 File No. E68961 (HA1E), E55996 (HA1B)
CSA C22.2 No. 14File No. LR21451 (HA1B),
E68961 (HA1E) (c-UL)
EN60947-5-5 DEMKO
Operating Temperature –25 to +60°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Storage Temperature –30 to +80°C
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Dielectric Strength
Between live and dead parts:2,500V, 1 minute
Between terminals of different poles:2,500V, 1 minute
Between terminals of the same pole:1,000V, 1 minute
Vibration ResistanceOperating extremes:5 to 55 Hz, amplitude 0.75 mmDamage limits: 100 m/s2 (10G)
Shock Resistance Operating extremes: 300 m/s2 (30G) maximumDamage limits: 1,000 m/s2 (100G) maximum
Mechanical Durability 1,000,000 operations minimum
Electrical Durability 100,000 operations minimum
Degree of Protection IP65
Terminal StyleSolder/tab terminal #110 (HA1B)Solder terminal (HA1E)PC board terminal
Weight (approx.) HA1B-V2E2R: 23gHA1E-V2S2R: 19g
Features• 36-mm depth behind the panel same
as H6 and L6 series control units.• Direct opening action mechanism
(IEC 60947-5-1, Annex K)• Safety lock mechanism to prevent
inadvertent operation.• The operator cannot be removed from
the front of the panel.• UL recognized, CSA certified, DEMKO
approved.
Shape ContactMaterial Contact
Type No.ButtonColorSolder/Tab
TerminalPC BoardTerminal
ø25mmMushroom
HA1B
SilverContact
1NC HA1B-V2E1R HA1B-V2E1VR
Redonly
2NC HA1B-V2E2R HA1B-V2E2VR
Features• Short 28.5-mm-long body• Direct opening action mechanism
(IEC 60947-5-1, Annex K)• Safety lock mechanism to prevent
inadvertent operation.• The operator cannot be removed from
the front of the panel.• UL recognized, CSA certified, DEMKO
approved.
Shape ContactMaterial Contact
Type No.ButtonColorSolder/Tab
TerminalPC BoardTerminal
ø25mmMushroom
HA1E
SilverContact
1NC HA1E-V2S1R HA1E-V2S1VR
Redonly
2NC HA1E-V2S2R HA1E-V2S2VR
ø16
(06/11/30)
H6 Series Emergency Stop Switches
28
ø16
Dimensions (Emergency Stop Switch)
Terminal Arrangement (bottom view)
Accessories
Locking Ring
Anti-rotation Ring
Rubber Gasket
LOCK
10.5 13.5 11
9 36 25
8.7
5.3
0.6
8.7
5.4
5.3
1.2
5.3
5.2
3.2 2.6
5.3 5.3
5.4
8.7
R15.5
17.8
15.8
ø21
ø24.9
ø1.2 holes
Panel Cut-out
When using a nameplate
ø16.2+0.2
0
+0.201.7
0+0.2
ø16.2
0+0.
217
.9
Panel Thickness 0.5 to 6
Width 0.8×0.5tPC Board Terminal
Terminal Width 2.8×0.5t
Solder/Tab Terminal TypePC Board Terminal Type
PC Board Drilling Layout(Bottom View)
(TOP)
•••• HA1B
1.2
ø24
.912.8
7
8.915
.8
17.8
ø24.9
3.1
5.3
5.3
0.632.6
ø23
.63.2
5.3
5.3
5.4
5.2
8.7
5.3 5.3
5.4
8.7
0+0.2
1.7
0+0.2
ø16.2
0+
0.2
17.9
0+0.2
ø16.2
0+0.
27.
8
0+0.1
ø3
Locking RingRubber Gasket
LOCK
ø1.2 holes
Panel Cut-out
When using a nameplate
Panel Thickness 0.5 to 3.2
PC Board TerminalWidth 0.8×0.5t Lever Stop
24.3
8.7
15.325
114.2
5.4
Terminal Width 2.8×0.5t
Solder/Tab Terminal TypePC Board Terminal Type
PC Board Drilling Layout(Bottom View)
(TOP)
•••• HA1E
•••• HA1E.1 (NC)
.2 (NC)
.1 (NC)
.2 (NC)
Note: 1NC type has contacts on the left only.
(TOP)
•••• Nameplate for ø16mm Emergency Stop Switch
ø43.5
ø16
1.7 0.3 (Gasket Thickness)
0+0.2
1.7
0+0.2
ø16.2
0+0.
217
.9
Type No. Legend Remarks
HAAV0 (blank) Material: polyamideBackground color: yellowLegend color: blackPackage quantity: 1
HAAV-27 EMERGENCYSTOP
•••• Dimensions
•••• Panel Cut-out •••• Panel ThicknessHA1B-V2E�R: 0.5 to 4.4 mmHA1E-V2S�R: 0.5 to 1.6 mm
All dimensions in mm.
(06/11/30)
H6 Series Miniature Control Units
29
ø16
Safety Precautions
Instructions
• Turn off the power to H6 series control units before installation, re-moval, wiring, maintenance, and inspection of the control units.Failure to turn power off may cause electrical shocks or fire hazard.
• To avoid burning your hand, use the lamp holder tool when replac-ing lamps.
• For wiring, use wires of a proper gauge to meet voltage and currentrequirements. Improper soldering may cause overheating and cre-ate a fire hazard.
Replacement of Lens and Marking Plate• Removing the Lens
AssemblyRemove the lens assem-bly (color lens, marking plate, and lens holder) by inserting a screwdriver into the recess of the lens thorough the bezel.
• Removing the Marking PlateRemove the marking plate by pushing the lens from the rear to dis-engage the latches between the lens and the lens holder, using the screwdriver as shown below.
Note: The translucent fil-ter in the lens holder can-not be removed because this filter is sealed to make the unit waterproof.
• InstallingFor round lens types, place the marking plate on the lens holder with the projection engaged and press the lens onto the lens holder to engage the latches. For square lens types, insert the marking plate into the lens, and press the lens onto the holder to engage the latches.Note: Make sure of correct orientation of the marking plate.
[Round Lens Type] [Square Lens Type]
Replacement of LampsLamps can be replaced using the lamp holder tool (OR-44) from the front of the panel, or by removing the contact block from the opera-tor.
• Removing the Lamp1. Slip the lamp holder tool onto the lamp head. Then push slightly,
and turn the lamp holder tool counterclockwise.
2. Push the bulb, and remove from the rear of the lamp holder.
• Installing the Lamp1. Insert the lamp into the lamp holder from the rear, and push in
completely using the smaller end of the lamp holder tool.2. Hold the bulb with the lamp holder tool as shown below.
3. Place the insertion guide of the lamp holder and the TOP marking side or the groove in the operator unit in the same direction. Insert the lamp holder into the housing with the lamp holder tool. Then push the lamp lightly and turn it clockwise to install.
Panel MountingRemove the contact block from the operator. Insert the operator into the panel cut-out from the front, then install the contact block to the operator.
• Removing the Contact BlockTurn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact block can be removed.
• Installing the Contact BlockInsert the contact block with the TOP mark-ings on the contact block and the operator placed in the same direction. Then lock the units, turning the locking lever in the direction of the arrow.
• Notes for MountingUse the optional Ring Wrench (MT-001) to mount the operator onto a panel. Tightening torque should not exceed 0.88 N·m. Do not use pliers. Do not tighten with excessive force, otherwise the locking ring will be damaged.
• Collective MountingAs the locking lever can be turned easily from the rear of the units using a screwdriver, the contact blocks can be removed even when mounted collectively.
Lens Marking Plate Lens Holder Lens Marking Plate Lens Holder
Lamp Holder Lamp Holder Tool
TOP marking
Grooves of operating axis(one each on top and bottom)
Plastic Part
9.3
9.3
(06/11/30)
H6 Series Miniature Control Units
30
ø16
Marking Plates and FilmsFor H6 series illuminated pushbuttons and pilot lights, legends and symbols can be engraved on marking plates, or printed mylar film can be inserted under the lens for labelling purposes.
• Marking Plate and Marking Film Size
• Insertion Order of Marking Plate and Film[Round Lens Type]
[Square Lens Type]
Wiring1. Solder the terminals at 350°C within 3 seconds using a 60W sol-
dering iron. Sn-Ag-Cu type is recommended when using lead-free solder. When soldering, do not touch the control unit with the soldering iron. Also ensure that no tensile force is applied to the terminal. Do not bend the terminal or apply excessive force to the terminal.
2. Use non-corrosive liquid flux.
Notes on Terminal CoverInsert the terminal cover into the contact block with the TOP mark-ings on the contact block and the terminal cover in the same direc-tion.Note: When wiring, insert the lead wires into the terminal cover
holes before soldering.
ConnectionPositive-lock connector and easy-lock connector are applicable to tab terminals.
Recommended Connectors
Note: Positive-lock is a registered trademark of Tyco Electronics.
Mounting the PC board terminal type control units on a PC board offers the following features.
Features• Reduced installation labor, easy wiring, space saving, and stan-
dardization.• Since the contact blocks on the PC board can be removed easily
using a locking lever, the H6 series control units are easy to main-tain.
• Because the H6 series control units require no studs for fastening the control unit to a PC board, special preparation of the control panel is not needed.
Notes for Designing PC board and Circuit• Use 1.6-mm-thick glass epoxy PC board with drilled holes.• Design a circuit so that the H6 series control unit can operate
within the rated voltage and current range. Make sure that inrush current and voltage do not exceed the rating.
• Minimum applicable load is 5V AC/DC,1 mA on gold contacts. Applicable range is subject to the operating condition and load.
• Since the 2.8-mm-wide terminal touches the PC board as shown on the right, short circuit may occur with pattern lines. Design a circuit carefully to prevent short circuit.
PC Board Drilling Layout
Instructions
Lens Round Lens
(round, round w/square bezel)
Square Lens
Built-inMarking Plate
• Engraving must be made on the engraving area within 0.5mm deep.
• The marking plate is made of white acrylic resin.
ApplicableMarking Film
• Two 0.1mm-thick films or one 0.2mm-thick film can be installed in the lens.
• Marking film is not included.• Recommended marking film: Polyester film
EngravingArea
16.4 mm
0.85
mm
ø16
.8 m
m
EngravingArea
0.85
mm
16.4 mm
16.4 mm
ø18
.4 m
m
18.4
mm
TOP marking
Lens Film MarkingPlate
Lens Holder Switch Note: Film is not supplied.
TOP marking
Lens Film MarkingPlate
Lens Holder Switch
Note: Film is not supplied.Make sure of correct orienta-tion of the marking plate.
Terminal Cover
TOP Marking SideTOP Marking Side
ItemPositive-lock Connector(Tyco Electronics)
Easy-lock Connector(Nichifu Co., Ltd.)
Terminal0.2 to 0.5 mm2 175412-1 0.2 to 0.3 mm2 OSS-62852F3
0.2 to 1.25 mm2 174778-1 0.5 to 1.25 mm2 OSS-62815F3
Housing 174779-1 NET1-28-1P
One Board Mounting
12 Control Units
8 Control Units
Soldered side Mounting side
(PC Board)1.6
2.8
2.8
2.8
2.4
2.4
5.0
5.0
ø6 drilled hole
for operatio
n
1 ( Not
e 1)
55
1.45 (Note 1)
6.4 6.8
10.7
10.7
9-ø1.2 (Note 2 )
Note 1: When designing, note the align-ment of centerlines of the con-tact blocks and centerlines of the operators.
Note 2: The diameter of the terminal hole is 1.2 mm.
(06/11/30)
H6 Series Miniature Control Units
31
ø16
Installation and Removal of Contact BlocksTurn the locking lever to install and remove the contact block on the PC board by using a screwdriver from a hole (ø6 mm) of the PC board.
Hole diameter may vary to meet installation requirements. When the locking lever can be turned by using a screwdriver from the upper or right space, the holes are not necessary.
Mounting Holes and Assembly Procedure• Drill mounting holes in the panel as shown below. When the units
are mounted collectively, provide adequate clearance.
• Assembly Procedure1. Install the operator to the operation panel.2. Insert the contact block to the operator from the rear.3. Turn the lock lever to lock the contact block.4. Insert the PC board to terminals and solder.Note 1: Make sure that each terminal is inserted into the PC board correctly.Note 2: Do not apply tensile force to the connector cable for extended period
of time.Note 3: Do not expose the contact block to water.Note 4: Ensure to lock contact blocks when the contact blocks are installed on
the operators.
ø6-mm-hole for installation and removal
�� ��
Upper Space
Right Space
<Example>
ø16.0
24 min.
0+0.1
24 m
in.
(06/11/30)
32
HA5W Series Oneboard Control UnitsReduces wiring and installation space. Achieves standard panel design.Reduce time and space by using a PC board and flat cable solution. Standard panels can be designed with flexibility.
• The separate structure of operator and contact/board makes maintenance easy.
• IDEC’s unique lock lever structure requires no studs on the board.
• H6 series control units can be used without modification.• Available with I/O terminals for parallel wiring.
12 LED Illuminated Pushbuttons
BX2A-26AT2I/O Terminal (26-pin)
Rear Side 8 LED Illuminated Pushbuttons
Types
Contact Ratings
Ordering Information1. Specify a button or lens color code in the Type No.[Example]
2. All units are supplied with an LED lamp.3. Illuminated pushbuttons HA2L-M1C14V➁ (momentary, SPDT)
are provided.
No. ofControl Units
IlluminationType
OperatingVoltage Type No. Notes
8LED
24V AC/DC ±10% HA5W-84 Panel color:Munsell 5Y7/112 24V AC/DC ±10% HA5W-24
Rated Operating Voltage 24V DC
Rated Operating Current 30 mA (resistive load)
Contact Material Gold-clad silver
HA5W-84 RRRR WW GGType No. Specify color codes for the control units in
order of (1) to (8) (see below).
Built-in LED Lamp RatingsType No. LFTD-2➁
Base SX6S/8×5.4
Operating Voltage 24V AC/DC ±10%
Rated Voltage 24V AC/DC
Current DrawAC 9 mA
DC 8 mA
Color Code ➁Specify a color code in place of ➁.A (amber), G (green), R (red), S (blue), W (white), Y (yellow)
Lamp Base Color Same as illumination color
Voltage Marking Die stamped on the lamp base
Life (reference value)Approx. 50,000 hours(When used on complete DC, luminance reduces to 50% of the initial intensity.)
Internal Circuit
A, R, W, Y
G, S
LED Chip
Protection Diode
Zener Diode
R R R R
W W G G
(1) (2) (3) (4)
(5) (6) (7) (8)
(1) (2) (3) (4)
(7) (8) (9) (10)
(5) (6)
(11) (12)
TOP TOP8-unit Type 12-unit Type
ø16
(06/11/30)
HA5W Series Oneboard Control Units
33
ø16
Dimensions
8-unit Type 12-unit Type
LOCK
Drilled Holefor Operation
[CN1]2
14
13
25
8
20
7
19
6
18
5
17
4
16
3
15
1
(+24V)
26
9
21
10
22
11
23
12
24
PB12
PL12
PB2
PL2
PB3
PL3
PB4
PL4
PB5
PL5
PB6
PL6
PB7
PL7
PB1
PL1
PB8
PL8
PB9
PL9
PB10
PL10
PB11
PL11
+1.
00
±0.
2
±0.2 ±0.2 +0.30
+1.00
53.0 53.0
100.0
50.0
58.0
4-ø4.2
[CN1][CN1]
(TOP)
24 58 68
6-ø4.5
77 77
164
24 24 24 24 24
38
56.2
11
52.32
11
52.32
56.2 38
27
94
50.5
27
50.5
142
(TOP)
53 53
116
24 24 24
58 6824
4-ø4.5
+1.00
±0.2 +0.30
±0.
2
±0.2
+1.
00
50.0
58.0
6-ø4.277.0 77.0
148.0 25 1· · · · · · · · · ·
· · · · · · · · · ·
3
26 24
(TOP) (TOP)
PL8PL6 PL7
PL4PL2 PL3
PB8PB5 PB6 PB7
PB4PB1 PB2 PB3
PL5
PL1
PL12
PL6
PB12PB7 PB8 PB9
PB6PB1 PB2 PB3
PB10
PB4
PB11
PB5
PL7
PL1
PL8
PL2
PL9
PL3
PL10
PL4
PL11
PL5
Wiring Diagram
8-unit Type
12-unit Type
Panel Cut-out8-unit Type 12-unit Type
Installing and Removing the Contact Blocks/PC BoardThe contact blocks and PC board can be installed and removed by operating the lock levers using a screwdriver as shown below.
Degree of ProtectionThe HA5W Oneboard Control Units become IP65 when waterproof gasket is used on the mounting screws. The HA2L-M1C14V illuminated pushbuttons used on the HA5W are IP65.
Panel Mounting ScrewsUse M4 countersunk screws for panel mounting.
[CN1]2
14
9
21
8
20
7
19
6
18
5
17
4
16
3
15
1
(+24V)
26
PB8
PL8
PB2
PL2
PB3
PL3
PB4
PL4
PB5
PL5
PB6
PL6
PB7
PL7
PB1
PL1
All dimensions in mm.
(06/11/30)
HA5W Series Oneboard Control Units
34
ø16
Wiring ExampleFor oneboard control units, use the connectors compliant with MIL standard.
• Turn off the power to the oneboard control units before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or fire hazard.
• To avoid burning your hand, use the lamp holder tool when replacing lamps.
Safety Precautions
JE1S-261(IDEC)
Flat cable (26-pin)JE1S-261(IDEC)
HA5W-8∗
BX2A-26AT2IDEC I/O Terminal
BT1.25-9-1(Nichifu)
IDEC’s Applicable ConnectorType No. Description
JE1S-261 26-pin, w/strain relief
(06/11/30)
H6 Series Miniature Control Units
35
ø16
(06/11/30)
IDEC CORPORATION (USA)1175 Elko Drive, Sunnyvale, CA 94089-2209, USATel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246E-mail: [email protected]
IDEC CANADA LIMITEDUnit 22-151, Brunel Road, Mississauga, Ontario, L4Z 1X3, CanadaTel: +1-905-890-8561, Toll Free: (888) 317-4332 Fax: +1-905-890-8562E-mail: [email protected]
IDEC AUSTRALIA PTY. LTD.2/3 Macro Court, Rowville, Victoria 3178, AustraliaTel: +61-3-9763-3244, Toll Free: 1800-68-4332Fax: +61-3-9763-3255E-mail: [email protected]
IDEC ELECTRONICS LIMITEDUnit 2, Beechwood, Chineham Business Park, Basingstoke, Hampshire RG24 8WA, UKTel: +44-1256-321000, Fax: +44-1256-327755E-mail: [email protected]
7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, JapanTel: +81-6-6398-2571, Fax: +81-6-6392-9731E-mail: [email protected]
Specifications and other descriptions in this catalog are subject to change without notice.
Cat. No. EP1051-0 DECEMBER 2006 11.9DNP PRINTED IN JAPAN
IDEC ELEKTROTECHNIK GmbHWendenstrasse 331, 20537 Hamburg, GermanyTel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24E-mail: [email protected]
IDEC (SHANGHAI) CORPORATIONRoom 608-609, 6F, Gangtai Plaza, No. 700, Yan'an East Road, Shanghai 200001, PRCTel: +86-21-5353-1000, Fax: +86-21-5353-1263E-mail: [email protected]
IDEC (BEIJING) CORPORATIONRoom 211B, Tower B, The Grand Pacific Building, 8A Guanghua Road, Chaoyang District, Beijing 100026, PRCTel: +86-10-6581-6131, Fax: +86-10-6581-5119
IDEC (SHENZHEN) CORPORATIONUnit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, Fu Tian District, Shenzhen, Guang Dong 518040, PRCTel: +86-755-8356-2977, Fax: +86-755-8356-2944
IDEC IZUMI (H.K.) CO., LTD.Unit 1505-07, DCH Commercial Centre No. 25, Westlands Road, Quarry Bay, Hong KongTel: +852-2803-8989, Fax: +852-2565-0171E-mail: [email protected]
IDEC TAIWAN CORPORATION8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih, Taipei County, Taiwan Tel: +886-2-2698-3929, Fax: +886-2-2698-3931E-mail: [email protected]
IDEC IZUMI ASIA PTE. LTD.No. 31, Tannery Lane #05-01, Dragon LandBuilding, Singapore 347788Tel: +65-6746-1155, Fax: +65-6844-5995E-mail: [email protected]
www.idec.com
(06/11/30)