16A and 32A totally modular multi ... - Rotasoc Catalogue.pdf · non-rewirable 32A in-feed rewirable In-feed 32A System end cap This module is used to cover the end of the last socket

16A and 32A totally modular multi-socket powerdistribution with 360˚ rotatable socket outlets

24

Tel: 01207 503400Fax: 01207 501799Email: [email protected]

Because of our policy of continuous improvement, Electrak reserves theright to change product specification without notice.

www.electrak.co.uk

in this section:

standardlow noisedual

25

modules just push fit and lock together

26

Fully 360˚ rotatable socket outlets (on or off load)

Totally modular in design, additional socket modules can be simply added

Modules securely lock together by cam-lock lever

All sockets are busbar interconnected (no terminals, no soldering)

Maximum rating 32A

Manufactured from high quality materials

Conforms to BS7671:2001 Section 607 High Protective Conductor Currents

Integrated Telecommunications and Data modules

The total solution for all types of workstations

Standard power system

Low noise (clean earth) system

Dual power system (standard and low noise together)

Cam-lock system - modules simply push fit together

and are secured to each other by cam-lock lever.

Patented rotational socket (GB 2330700)

and patented locking fuse (GB 2330955).

Other international patents pending.

‘cam-lock’ lever system secure and innovative

integral touch-proof fusing

21

43

BSI KitemarkCertified

Quality AssurancesIS0 9001 Approved

27

Range of desk top modules

in aluminium extrusion

Power for racks (19” panels)

4, 5 or 6 sockets horizontal

any combination vertical

Rotasoc is a comprehensive modular power system

designed to meet the increasing power and

communication needs of the workplace. Its many unique

design features allow rapid configuration and changes or

relocation of workstations. Due to its 3 main product

groupings – standard power, low noise power (clean

earth) and dual power (standard and low noise together),

Rotasoc can be used in various environments including

those where an uninterrupted power supply is critical.

In today’s workplace, due to office aesthetics, space

restrictions and health and safety requirements, cable

management needs to be carefully planned. Rotasoc

facilitates easy and safe accommodation of large

amounts of cables and bulky transformers as each socket

can rotate 360° in either direction.

Rotasoc modules are designed for speed of

installation – they can be factory configured or

assembled in situ. The modularity of the system

permits units to be expanded easily and safely

for increased power demand. When additional

power is required, the modules can be simply

pushed together and locked using the ‘cam-lock’

lever system. Modules are colour coded and

keyed to ensure the three product types

cannot be inadvertently

mixed when additional

modules are attached.

32A desk unit with MCBprotection and Electrak 24 tap-off

In-feed modules can be safely connected to the power

supply prior to workstation installation, allowing circuits

to be electrically tested, signed off and carpets laid.

Telecom/data modules can be locked onto power

modules to form one unit, but wired separately or used

as stand alone units. Using the dual power system,

overall length can be minimised utilising one In-feed

module.

16A systems can be upgraded to 32A by simply

changing the infeed module and supply cables to 32A in

addition to any interconnection modules, which may be

on the system, to 32A.

Ease of installation is further permitted by the use of the

central through fixing method, which allows the modules

to be easily installed onto all types of fixing surfaces.

All these features permit dealer support workstations

to be reconfigured to dealer workstations in minutes

using additional power modules, thereby keeping time

and costs to a minimum.

contactFor specific applications please contact:

Sales on 01207 503 400 or [email protected]

the Rotasoc system

32A dealer desk configuration

28

MCB 6A, 16A, 20A or 32A 30mA RCD or 16A, 20A or 32A RCBO

Neon & BS 1362 fuseBS 1362 fuse

2 gang socket unfused 3 gang socket unfused 4 gang socket unfused

protection

sockets

External earth kit

For bonding In-feedto furniture

Switch/neon & BS 1362 fuse

32A in-feed non-rewirable

32A in-feedrewirable

In-feed 32A

System end cap

This module is used to cover theend of the last socket moduleunless a Communication moduleis fitted.

These modules are available in 2, 3 and 4 gang options. They can be connected to each other to give any combination of sockets.Individual fused socket modules can also be used with 32A in-feeds.

32A flexible interconnection

32A Interconnection modules are suppliedwith 4mm2 x 3 singles in conduit and areused to interconnect between units withinthe 32A range of products.

Protection modules are utilised for the protection and switching ofcircuits from the 32A In-feed modules where required. Customer toselect fuse or breaker sizes.

32A In-feed modules connect to the power supply via a powertrack tap off or SWA cable. Both have additional external earthconnections. The non-rewirable In-feed module requires customerto specify the type of tap off or SWA cable connection for factoryfitting. 32A In-feed modules are non-switched and non-fused.

32A system components

16A or 32A filter

29

sockets

product configuration

1 Select the type of distribution system - standard, low noise or dual

2 Select the means of powering the system - cable or power track tap-off

3 Select the type of in-feed module to match the cable capacity - 16A or 32A

4 Select the means of protection

5 Select the number of socket modules from the 2, 3, 4, gang range (individually fused or non-fused)

6 Select the interconnection units if required

7 Finish system with the end cap

(All modules push fit and lock together on-site or can be factory assembled to customer requirement).

in-feed 16A

External earth kit

For bonding In-feedto furniture

System end cap

This module is used to cover theend of the last socket moduleunless a communication module is fitted.

2 gang socket unfused 3 gang socket unfused 4 gang socket unfused

2 gang socket fused 3 gang socket fused 4 gang socket fused

16A flexible interconnection

16A Interconnection modules are suppliedwith 1.5mm2 x 3 core flexible cable andused to interconnect between units withinthe 16A range of products.

16A system components

These modules are available in 2, 3 and 4 gang options. They canbe connected to each other to give any combination of sockets.The range is available with individual 3.15A or 5A fuses withineach socket to meet BS6396.

16A In-feed modules are rewirable or supplied witha 3 core flexible cable with a BS1363 13A plug.MCB and RCD protection modules can also beused with 16A In-feeds.

16A in-feed fused 16A in-feed switch/neon 16A in-feed switched/neon and fused

16A in-feed Neon16A in-feed

30

in-built innovation and versatility

examples

32A in-feed with Electrak tap-off

ProtectionBS 1362 fused

and neon

Systemend cap

4 gang unfused sockets

16A in-feed with cable &

13A BS1363 plug 4 gangfused sockets

2 gangfused sockets

Systemend cap

The Rotasoc system comprises of three product groups: -

Standard Power

Low Noise Power (clean earth)

Dual Power (standard and low noise together)

All product groups are fully approved by BSI with the

range carrying the BSI Kitemark. The system conforms to

BS7671 section 607 High Protective Conductor Currents

where leakage onto earth is in excess of 3.5mA.

The Rotasoc system comprises of units made up from a

number of self contained flame retardant ABS

modules. Each module contains from three to six vertically

stacked 32A busbar conductors, which distribute power to

each socket outlet with each socket able to rotate 360° in

both directions facilitating optimal cable management.

All modules are ultrasonically welded together for high

electrical and mechanical integrity, with no integral

serviceable terminals apart from the rewirable In-feeds

therefore maintenance is minimal.

Rotasoc modules incorporate a secure and innovative

locking device ‘Cam-Lock’ Lever System. This provides

safe and reliable interlocking of the modules but easy tool

release should more modules need to be added, thus

making Rotasoc a truly modular and flexible system.

Integral touch-proof fusing incorporated into the centre of

the unique and patented rotating socket outlet is used to

comply with BS6396 where units are connected to the

power supply via a BS1363 13A three-pin plug. (All other

applications not using a power supply with a BS1363 13A

three-pin plug do not have to comply with this standard).

Rotasoc modules can be inter-linked to other remote units

by using the Interconnection module, which is supplied

with flexible cable, the length of which is determined by

the customer. These modules then just plug into the end

of each power module and are locked together by the

cam-lock lever.

A major benefit to the speed of installation is the capability

of connecting the In-feed modules to the power supply

prior to the workstation arriving. This allows the electrical

contractor to test and sign off the circuit continuity, leaving

the socket modules to be simply fitted at the most

convenient time during or after the workstation is installed.

1 2

llllllllllllllllllllllllllllllllllllllllllllllllllllll lllllllll

lllllllllll

llllllll

llllll

llllll

llllll

llllll

lllllli

iiiiilRaised Floor Floor Grommet

In-feed and Power Modulepush together and lock withcam lock lever

Tap-off and In-feed pulled through FloorGrommet after testing and when required

32A In-feed connected to Tap-off andleft underfloor until required

Underfloor Power Track

Tap-off

31

buyer’s guidestandard power distribution (grey socket outlets) 2P+E

CAT NO. DESCRIPTION

16A In-feed Modules rewirable

RAB201A 16A In-feed Module Non-Switched/Non-Fused

RAB202A 16A In-feed Module Neon Power Indication

RAB203A 16A In-feed Module Switch Neon

RAB204A 16A In-feed Module Switch Neon/6.3A Fused

RAB205A 16A In-feed Module 6.3A Fused

16A In-feed Module c/w cable and plug

Non Switched and Non Fused

RAB002A 2m 13A BS1363 Plug to RAB201A 16A In-feed Module




Neon Indication





Switched with Neon





Switched/Neon and 6.3A Fused





6.3A Fused





32A In-feed Module rewirable

RAB301A 32A 2P+E rewirable In-feed Module

32A In-feed Modules non-rewirable c/w Electrak standard Tap-off

RAB311A 32A In-feed Module c/w E24 3m unfused metal Tap-off DP1332

RAB312A 32A In-feed Module c/w E24 5m unfused metal Tap-off DP1532

RAB315A 32A In-feed Module c/w E24 3m 13A fused 607 metal Tap-off DP1327

RAB316A 32A In-feed Module c/w E24 5m 13A fused 607 metal Tap-off DP1527

RAB340A 32A In-feed Module c/w E24 3m unfused VO Nylon Tap-off DV1332

RAB341A 32A In-feed Module c/w E24 5m unfused VO Nylon Tap-off DV1532

RAB344A 32A In-feed Module c/w E24 3m 13A fused 607 VO Nylon Tap-off DV1327

RAB345A 32A In-feed Module c/w E24 5m 13A fused 607 VO Nylon Tap-off DV1527

16A and 32A External Earth Kit

RAZ010A 250mm x 1.5mm2 Earth Cable Kit c/w fixings for 16A Infeed


CAT NO. DESCRIPTION

Protection Modules

RAB401A BS1362 Fuse Protection Module

RAB402A BS1362 Fuse and Switch Neon Protection Module

RAB403A BS1362 Fuse and Neon Protection Module

RAB410A 6A MCB Module




RAB450A 16A Residual Current Breaker Overload protection



RAB404A 32A max Single Isolation Module

RAB405A RCD Module 30mA

RAB480A 16A Filter Module

RAB490A 32A Filter Module

Socket Modules

RAB502A 2 Gang Non-Fused Socket Module Black/Grey



RAB532A 2 Gang Individually 3.15A Fused Socket Module Black/Grey



RAB552A 2 Gang Individually 5A Fused Socket Module Black/Grey



16A Interconnection Modules

RAB603A 0.3m 16A Male to Female Interconnection Module


RAB610A 1m 16A Male to Female Interconnection Module













End Cap

RAZ001A End Cap

32

buyer’s guidelow noise (clean earth) power distribution (red socket outlets) 16A, 2P+CE 32A, 2P+E+CE

CAT NO. DESCRIPTION


RAC201A 16A In-feed Module Non-Switched/Non-Fused

RAC202A 16A In-feed Module Neon Power Indication

RAC203A 16A In-feed Module Switch Neon

RAC204A 16A In-feed Module Switch Neon/6.3A Fused

RAC205A 16A In-feed Module 6.3A Fused



RAC002A 2m 13A BS1363 Plug to RAC201A 16A In-feed Module




Neon Indication





Switched with Neon





Switched/Neon and 6.3A Fused





6.3A Fused






RAC301A 32A 2P+E rewirable In-feed Module

32A In-feed Module c/w Electrak Low-noise Tap-off

RAC311A 32A In-feed Module c/w E25 3m unfused metal Tap-off JP2332

RAC312A 32A In-feed Module c/w E25 5m unfused metal Tap-off JP2532

RAC315A 32A In-feed Module c/w E25 3m 13A fused 607 metal Tap-off JP2327

RAC316A 32A In-feed Module c/w E25 5m 13A fused 607 metal Tap-off JP2527

RAC340A 32A In-feed Module c/w E25 3m unfused VO Nylon Tap-off JV2332

RAC341A 32A In-feed Module c/w E25 5m unfused VO Nylon Tap-off JV2532

RAC344A 32A In-feed Module c/w E25 3m 13A fused 607 VO Nylon Tap-off JV2327

RAC345A 32A In-feed Module c/w E25 5m 13A fused 607 VO Nylon Tap-off JV2527




CAT NO. DESCRIPTION

Protection Modules

RAC401A BS1362 Fuse Protection Module

RAC402A BS1362 Fuse and Switch Neon Protection Module

RAC403A BS1362 Fuse and Neon Protection Module

RAC410A 6A MCB Module




RAC450A 16A Residual Current Breaker Overload protection



RAC404A 32A max Single Isolation Module

RAC405A RCD Module 30mA

RAC480A 16A Filter Module

RAC490A 32A Filter Module

Socket Modules

RAC502A 2 Gang Non-Fused Socket Module Black/Red



RAC532A 2 Gang Individually 3.15A Fused Socket Module Black/Red



RAC552A 2 Gang Individually 5A Fused Socket Module Black/Red




RAC603A 0.3m 16A Male to Female Interconnection Module


RAC610A 1m 16A Male to Female Interconnection Module













End Cap

RAZ001A End Cap

33

buyer’s guidedual power distribution (standard & low noise) 4P+E+CE

CAT NO. DESCRIPTION


RAD201A 16A In-feed Module Non-Switched/Non-Fused

RAD202A 16A In-feed Module 2 x Neon Power Indication

RAD203A 16A In-feed Module 2 x Switch Neon

RAD204A 16A In-feed Module 2 x 6.3A Fused



RAD002A 2x 2m 13A BS1363 Plug to RAD201A 16A In-feed Module




Neon Indication





Switched with Neon





6.3A Fused






RAD301A 32A 4P+2E rewirable In-feed Module

32A In-feed Module c/w Electrak Tap-offs

RAD311A 32A In-feed Module c/w E26 3m unfused metal Tap-off KP3328

RAD312A 32A In-feed Module c/w E26 5m unfused metal Tap-off KP3528

RAD313A 32A In-feed Module c/w E26 3m unfused metal Tap-off DP1332+JP2332

RAD314A 32A In-feed Module c/w E26 5m unfused metal Tap-off DP1532+JP2532

RAD319A 32A In-feed Module c/w E26 3m fused 607 Tap-off DP1327+JP2327

RAD320A 32A In-feed Module c/w E26 5m fused 607 Tap-off DP1527+JP2527

RAD340A 32A In-feed Module c/w E26 3m unfused VO Nylon Tap-off KV3328

RAD341A 32A In-feed Module c/w E26 5m unfused VO Nylon Tap-off KV3528

RAD342A 32A In-feed Module c/w E26 3m unfused VO Nylon Tap-off DV1332+JV2332

RAD343A 32A In-feed Module c/w E26 5m unfused VO Nylon Tap-off DV1532+JV2532

RAD348A 32A In-feed Module c/w E26 3m 13A fused 607 Tap-off DV1327+JV2327

RAD349A 32A In-feed Module c/w E26 5m 13A fused 607 Tap-off DV1527+JV2527




CAT NO. DESCRIPTION

Protection Modules

RAD401A 2x Fuse Protection Module

RAD402A 2x Switch Neon Module

RAD403A 2x Neon Module

RAD410A 6A MCB Module




Socket Modules Non-Fused

RAD502A 2 Gang Socket Module Standard/Clean Bypass



RAD512A 2 Gang Socket Module Clean/Standard Bypass



Individually Fused Socket Modules

RAD532A 2 Gang Fused 3.15A Sockets Standard/Clean Bypass



RAD542A 2 Gang Fused 3.15A Sockets Clean/Standard Bypass



RAD552A 2 Gang Fused 5A Sockets Standard/Clean Bypass



RAD562A 2 Gang Fused 5A Sockets Clean/Standard Bypass




RAD603A 0.3m 16A Male to Female Interconnection Module


RAD610A 1m 16A Male to Female Interconnection Module













End Cap

RAZ001A End Cap

34

This system is used for distribution of communications either with patch leads supplied or direct on site wiring.

Catalogue No. Communications Modules

These modules are for in line socket connection and are rewirable. They can

be supplied with pre-terminated leads. Customer to specify length of cable

and type of connectors if required.

RAF 101A 4 Way Communications module for 50/25mm face plate

RAF 102A 4 Way Communications module for 50/25mm face plate with conduit entry



These modules are standalone and therefore will not connect with the Rotasoc

sockets. They are rewirable and can be supplied with pre-terminated leads.

Customer to specify length of cable and type of connectors if required.

RAF 210A Standalone 4 Way Communications module for 50/25mm face plate

RAF 211A Standalone 4 Way Communications module for 50/25mm face plate with

conduit entry


RAF 213A Standalone 4 Way Communications module for 37/22mm face plate with

conduit entry

Catalogue No. Communications Modules Category 6 Compliant

These modules are for in line socket connection and are rewirable. They can

be supplied with pre-terminated leads. Customer to specify length of cable.

Only Krone Cat 6 UTP module RJ-KCL part number 6006031 connectors

can be used



These modules are standalone and therefore will not connect with the Rotasoc

sockets. They are rewirable and can be supplied with pre-terminated leads.

Customer to specify length of cable. Only Krone connector can be used as above.



with conduit entry

communications distribution

35

Catalogue No.

RAK001 2 gang individually 3.15A fused socket unit c/w 1m interconnection flexible lead



RAK010 2 gang non-fused socket unit c/w 1m interconnection flexible lead



RAK020 2 gang individually 3.15A fused socket unit c/w 3m of flexible cable and BS1363 plug



RAK030 2 gang non-fused socket unit c/w 3m of flexible cable and BS1363 plug



Range of desk top modules in aluminium

extrusion which simply clamp onto desk top

desk top units

2 gang desktop unit

Desk top unit connecting directly into under-desk socket module

Brackets fit desk top thickness 25mm to 38mm

Other brackets to customer specification

Desk top unit connecting

to power via BS1363 plug

3 gang desktop unit

36

Power modules in aluminium extrusion. Units are made to customer specification.

Power and communicationmodules in one unit

Catalogue No. Standard Grey Sockets 2P+E

RAL001 2 gang individually 3.15A fused socket unit c/w 3m flexible cable and BS1363 plug

RAL002 3 gang individually 3.15A fused socket unit c/w 1m interconnecting unit

Low Noise Red Sockets 2P+CE

RAL010 2 gang individually 3.15A fused socket unit c/w 3m flexible cable and BS1363 plug

RAL011 3 gang individually 3.15A fused socket unit c/w 1m interconnecting unit

vertical desk top units

Vertical desk top unit is secured

with M10 bolt through desk top

2 gang 205mm high

3 gang 265mm high

37

Reference must be made to all relevant and associated standards.

BS6396: 2002 Electrical systems in office furniture and office screens.

BS7671: 2001 Requirements for Electrical Installation

(IEE Wiring Regulations 16th Edition)

Electricity at Work Regulations 1989

Health and Safety Legislation.

Below is a brief outline of the main criteria within the standards:

BS6396: 2002 was published with regard to the use of electrical

equipment within general office furniture and screens. This standard

sets out in its scope the use and testing of electrical socket outlets

and associated wiring when used together with a 13A BS1363 fused

plug and makes provision for the routing of cables through furniture.

For compliance with this standard socket outlet configurations 2, 3 or 4

outlets should be individually fused @ 5A and 5 or 6 outlets individually

fused @ 3.15A.

BS7671: 2001 16th edition. The Health and Safety Executive states

that installations which conform to the standards laid down in BS7671:

2001 are regarded by the HSE as likely to achieve conformity with the

relevant parts of The Electricity at Work Regulations 1989.

Special note should be taken of Section 607 within BS7671: 2001

Earthing requirements for the installation of equipment having high

protective conductor currents.

Section 607 has particular importance when there is a requirement for

a quantity of information technology equipment being supplied from a

final circuit in a location where the protective current exceeds 3.5mA in

normal use. Due to current in the protective conductor arising from the

use of IT equipment, there is a requirement to provide a mechanically

protected 4mm2 conductor (607-02-04(ii)). Rotasoc achieves this when

wired in accordance with the installation sheets by providing

mechanically protected 5mm2 earth conductors within the product.

BSI Kitemark Licence approved to BS5733 and BS1363 part 2

Manufacturing approved to ISO9001:2002

Quality Assurance Certificate No.10270

Electrical test data

Rated Current 32A

Rated Voltage 230V~

Frequency 50/60Hz

Conductor resistance

2 Socket module 0.6mΩ



Volt drop

Live & neutral

2 Socket module 1.2mV/A



Protection module 4.0m/V/A

In-feed 16A 6.0mV/A

+1.5mm2 29mV/A/m

32A 2.5mV/A

+4mm2 11mV/A/m

Interconnection 16A/32A 2.0mV/A

+1.5mm2 29mV/A/m

+4mm2 11mV/A/m

Earth Fault loop impedance




Protection module 4.0mΩ

In-feed 16A 6.0mΩ

+1.5mm2 29mΩ/m

32A 2.5mΩ

+4mm2 11mΩ/m

Interconnection 16A/32A 2.0mΩ

+1.5mm2 29mΩ/m

+4mm2 11mΩ/m

Mechanical Data

Number of conductors 3-6

Busbar conductor cross sectional area 5mm2

16A Rewirable In-feed terminal capacity 1.5mm2

32A Rewirable In-feed terminal capacity 6mm2

Material Specification

Module Housing VØ Flame retardant ABS

Socket Outlets Polycarbonate

Busbars & socket rings High conductivity copper C101

Other metalwork Phosphor bronze PB102

technical information British standards

38

to connect and disconnect Rotasoc modules:

1. Connection/disconnection to be made by a competent person only

2. Check that both Male and Female ends have same colour coded Bus-bar Shield

3. Turn modules over and release the Red Cam-lock lever with a small screwdriver

into upright position

4. Locate Male and Female ends and push together until fully closed

5. Press the Red Cam-lock lever over until flush with the casing to lock

the modules together

6. To disconnect, reverse the procedure

Rotasoc installation instructions

to fix modules to surface:

1. Flip up all rubber Screw Cover Caps with flat blade screwdriver

2. Insert through all holes a No 8 pozi-pan screw or M4 bolt to required length

3. Tighten screw/bolt down to mounting surface

4. Push rubber Screw Cover Caps down

39

501.6

95.3* 250.8* 131*

Note: All modules are 60mm wide. All dimensions are in millimetres.*Fixing hole dimensions.

95.316A In-feed Module

33.1 High

11732A In-feed Module

36 High

79.3BS 1362 Protection Module

56.1 High

1312 Gang Socket Module

32.9 High

171.7Data Module

(Connects to power module)41.3 High

190.93 Gang Socket Module

32.9 High

250.84 Gang Socket Module

32.9 High

162.5MCB, RCD Protection Module

81.6 High

24.5End Cap31 High

8.5162.28.5

44.8 44.516A & 32A Interconnection

35.7 High

24.5

24.6

195.3Standalone Data Module

41.3 High

162.2

Data Modulefixing hole undercable/conduit grip

fixing dimensions

16A unit made up from 16A in-feed, 4 gang & 2 gang socket modules and end cap.

example

162.516A & 32A Filter Module

52 High

Quality AssuranceISO 9001 Approved

BSI KitemarkCertified

Documents

16A and 32A totally modular multi ... - Rotasoc Catalogue.pdf · non-rewirable 32A in-feed rewirable In-feed 32A System end cap This module is used to cover the end of the last socket