(15PG) IManager U2000 Basic Operation Practice Guide

iManager U2000 Basic Operation

Practice Guide

iManager U2000 Basic Operation Practice Guide ISSUE1.03

Table of Contents

Confidential Information of Huawei. No Spreading without Permission

i

Table of Contents

Chapter1 Starting and Shutting Down U2000 ..................................................... 1

1.1 Starting U2000 ..................................................................................................................... 1

1.1.1 On the Windows Platform ...................................................................................... 1

1.1.2 On the UNIX/Linux Platform ................................................................................ 4

1.2 Shutting Down U2000 ......................................................................................................... 7

1.2.1 On the Windows Platform ...................................................................................... 7

1.2.2 On the UNIX/Linux Platform ................................................................................ 8

Power Off the Server Safely. .................................................................................. 8

Chapter2 Checking U2000 and Opening Online Help ......................................... 9

2.1 Checking the U2000 Server ................................................................................................ 9

2.1.1 Checking the Database Information ...................................................................... 9

2.1.2 Checking the System Resource Information ......................................................... 9

2.1.3 Checking the Hard Disk Information .................................................................. 10

2.2 Checking on the U2000 Client .......................................................................................... 10

2.2.1 Verifying the License File ..................................................................................... 10

2.2.2 Verifying the Communication with the GNE ..................................................... 11

2.3 Opening the Online Help .................................................................................................. 14

2.3.1 Method 1 ................................................................................................................ 14

2.3.2 Method 2 ................................................................................................................ 15

Chapter3 Configuring at One Node and Querying ............................................ 16

3.1 U2000 Basic Configuration ............................................................................................... 16

3.1.1 Customer Option ................................................................................................... 16

3.2 Creating NE ....................................................................................................................... 17

3.2.1 Configuring NE Manually .................................................................................... 18

3.2.2 Configuring NE by Uploading ............................................................................. 20

3.3 Basic Configuration of NE ................................................................................................ 21


Table of Contents


ii

3.3.1 The Clock Source Configuration ......................................................................... 21

3.3.2 Orderwire Configuration ..................................................................................... 22

3.3.3 Performance Events Configuration ..................................................................... 24

3.4 User Management ............................................................................................................. 26

3.4.1 Creating New NMS User ...................................................................................... 26

3.4.2 Querying NE User ................................................................................................. 29

3.4.3 Enabling Remote Maintenance User ................................................................... 30

3.5 Browsing Alarm and Performance .................................................................................. 31

3.5.1 Browsing the WDM Performance........................................................................ 31

3.5.2 Browsing the Event ............................................................................................... 32

3.5.3 Browsing the Alarm .............................................................................................. 32

3.6 Database Backup ............................................................................................................... 34

3.6.1 U2000 Database Backup ....................................................................................... 34

3.6.2 NE Database Backup ............................................................................................ 36


Error! Use the Home tab to apply 1 to the text that you want to appear here.


1

Chapter1 Starting and Shutting Down U2000

1.1 Starting U2000

Huawei iManager U2000 (U2000 for short as below) includes three parts:

So to start U2000, there are three steps:

1) Starting the database;

2) Starting the U2000 Server;

3) Starting the U2000 Client.

U2000 can be installed on the UNIX/Linux and Windows platforms, and it provides the same

functions and has the same operation on these platforms.

1.1.1 On the Windows Platform

Start the U2000 Server and U2000 Client as follow:

Step Action

1

Starting the Database

The U2000 can start properly only after the database is started. Generally, the

database starts along with the OS.

Log in to the OS as a user with administrator rights

Choose Start > All Programs > Microsoft SQL Server 2008 >

Configuration Tools > SQL Server Configuration Manager > SQL

Server Services.

Right-click SQL Server (MSSQLSERVER) and choose Start from the

shortcut menu

Notes:

If the SQL Server 2000 database is installed on Windows Server 2003,

choose Start > Programs > Microsoft SQL Server > Service Manager. In

Database U2000 Server U2000 Client




2

Step Action

the SQL Server Service Manager dialog box, click Start/Continue.

In the SQL Server Service Manager dialog box, if Start/Continue is dimmed,

Microsoft SQL Server is running.

2

Starting the U2000 Server

Method 1: Double-click the "U2000Server" icon on the desktop;

Method 2: In the directory C:\U2000\server\bin, double-click

startnms.bat.

3

Starting the U2000 System Monitor

Method 1: Double-click the "U2000 System Monitor " icon on the desktop;

Method 2: In the directory C:\U2000\client, double-click

startup_sysmonitor_global.bat

4

Enter the user, password and server. For example,

User: admin

Password: Changeme_123 (default for U2000V100R009C00)

Server: Localhost




3

Step Action

5

Click

The user name and password are the same as those used for logging in to the

U2000 client.

Notes:

Wait a few minutes until the NE Manager, Security Process, Topology

Processr, etc. processes of Automatic start mode are all in "Running" status.

Then the U2000 server starts successfully.

6

Start the U2000 Client

Method 1: On the computer of the U2000 client, double-click the "U2000

Client" icon on the desktop.

Method 2: In the directory C:\U2000\client, double click

startup_all_global.bat

7

Enter the user name, password and server. For example:

User: admin


Server: Localhost




4

Step Action

The password must be changed during the first login to ensure system security.

Keep the password confidential and change it regularly.

Notes:

If the U2000 Server and the U2000 Client are on different computers, click icon to edit the IP Address and port where the U2000 Server is installed.

8 Click to display the U2000 Main Topology window.

1.1.2 On the UNIX/Linux Platform

The database always starts with the Operating System (OS), and you can check in by inputting

the commands on the terminal window: (Here we use nmsuser user)

# su - sybase

$ ps -ef | grep sybase

If it replies two processes as below, it means sybase has started correctly.

/opt/sybase/ASE-15_0/install/RUN_DBSVR

/opt/sybase/ASE-15_0/install/RUN_DBSVR_back

Run the following commands to start the Sybase process if it is not running:

# su - sybase

$ cd /opt/sybase/ASE*/install

$ ./startserver -f ./RUN_DBSVR &




5

$ ./startserver -f ./RUN_DBSVR_back &

And then start the U2000 Server and the U2000 Client as follows:

Step Action

1

Starting the U2000 Server

Method 1: Double-click the "U2000 Server " icon on the desktop;

Method 2: Enter the following commands in the terminal window.( (Here we

use nmsuser user)

$ cd /opt/U2000/server/bin

$ ./startnms.sh

2

Starting the U2000 System Monitor

Method 1: Double-click the "U2000 System Monitor " icon on the desktop;

Method 2: Enter the following commands in the terminal window. ((Here we

use nmsuser user)

$ cd /opt/U2000/client

$ ./startup_sysmonitor_global.sh

3

Enter the user, password and server. For example,

User: admin


Server: Localhost




6

Step Action

4

Click

Notes:

The password must be changed during the first login to ensure system security.

Keep the password confidential and change it regularly.

Wait a few minutes until the NE Manager, Security Process, Topology Processr,

etc. processes of Automatic start mode are all in "Running" status. Then the

U2000 server starts successfully.

5

Starting the U2000 Client(UNIX)

Method 1: Double-click the "U2000 Client" icon on the desktop.

Method 2: Enter the following commands on the terminal window:

$ cd /opt/U2000/client

$ ./startup_all_global.sh

6

Enter the user name, password and server. For example:

User: admin


Server: < Localhost >

Notes:

If the U2000 Server and the U2000 Client are on different computers, click icon to edit the IP Address and port where the U2000 Server is installed.

The U2000 Client cannot run on the Linux platform. It is recommended to run the U2000 Client on the Windows platform and login.




7

Step Action

7 Click to display the U2000 Main Topology window.

1.2 Shutting Down U2000

To shut down U2000, there are two steps:

1) Shutting down the U2000 Client;

2) Shutting down the U2000 Server;

1.2.1 On the Windows Platform

Step Action

1 Shutting down the U2000 client:

Select [File/Exit] on the main menu.

2 Click on the Logout Confirmation dialogue box.

3 If the topology has changed, please save it to the database, click .

4

Log in to the OS as a user with administrator rights.

In the Windows Task Manager dialog box, view the startup information about

the U2000 server processes.

If imapmrb.exe, imapwatchdog.exe, imapsysd.exe, imapeventmgr.exe,

imap_sysmonitor.exe, ResourceMonitor.exe, imapsvcd.exe,

EmfGnlDevDm.exe, and imapPortTrunkSvc.exe are displayed in the process

list, the U2000 server processes have started.

In the U2000 software installation directory, for example, D:\U2000\server\bin,

run stopnms.bat to stop U2000 server processes.

Notes:

After a few minutes, In Windows Task Manager, click the Processes tab and check that there is no process such as imapmrb.exe, imapwatchdog.exe, imapsysd.exe, imapeventmgr.exe, imap_sysmonitor.exe, ResourceMonitor.exe, imapsvcd.exe, EmfGnlDevDm.exe, and imapPortTrunkSvc.exe. So the U2000 server processes have been stopped.




8

1.2.2 On the UNIX/Linux Platform

Step Action

1 Shutting down the U2000 client:

Select [File/Exit] on the main menu.

2 Click on the Logout Confirmation dialogue box.

3 If the topology has changed, please save it to the database, click .

4

Log in to the OS of the server as the nmsuser user.

To check the running status of the U2000 process, run the following command:

$ daem_ps

The U2000 is running if the displayed information contains imap_sysmonitor

-cmd start.

Run the following commands to stop U2000 if it is running:

$ cd /opt/U2000/server/bin

$ ./stopnms.sh

Run the following command to check the running status of the U2000 process:

$ daem_ps

The process is stopped if the displayed information is empty.

5

Power Off the Server Safely.

Log in to the UNIX/Linux OS as user root.

Run the following commands to power off the server:

# sync;sync;sync;sync

# shutdown -y -g0 -i5 (UNIX)

# shutdown -h now (Linux)




9

Chapter2 Checking U2000 and Opening Online Help

2.1 Checking the U2000 Server

2.1.1 Checking the Database Information

Step Action

1 Select Database Monitor tag on the U2000 System Monitor Client;

2

Check if there is any red table on the database tag;

Notes:

If there is red database table, it means data space allocated for it isnt enough.

2.1.2 Checking the System Resource Information

Step Action

1 Select Server Monitor tag;

2

Check if there is any red table on the system resource tag.

Notes:

If there is red system resource table, it means physical memory or CPU isnt enough.




10

2.1.3 Checking the Hard Disk Information

Step Action

1 Select Hard Disk Monitor tag;

2

Check if there is red table on the system resource tag.

Notes:

If there is red hard disk table, it means there is not enough space on the hard disk.

2.2 Checking on the U2000 Client

2.2.1 Verifying the License File

Step Action

1

Check if the license file has installed in the directory of

C:\U2000\server\etc\conf\license (Windows) or

/opt/U2000/server/etc/conf/license(UNIX or Linux).

2 Check under the directory of C:\U2000\server\etc\conf\license (Windows) or

/opt/U2000/server/etc/conf/license(UNIX or Linux), if there is only one license file.

3

Open the license file, and check if the ESN information is the same as that from

running C:\U2000\server\lbin\ESN.exe(Windows) or $ cd /opt/U2000/server/lbin and

$ ./esn (UNIX or Linux).

4

Select [Help/License Management/License Information] on the Main Menu.

5 Select the Resource Control Item/Function Control Item.




11

6

Check the functions and management capabilities.

Notes:

If the functions are consistent with what you purchased, the license works normally.

2.2.2 Verifying the Communication with the GNE

Step Action

1 Select [Administration/DCN Management] from the Main Menu of the U2000 Client.




12

2

Input the NE IP address .

3

Click NE tag, check the communication status.

Notes:

Right click on one row and select Test GNE, you can verify the communication with the NE.




13

Right click the NE icon in the Main Topology, you can select [Ping] to test the communication of the NE either.




14

2.3 Opening the Online Help

2.3.1 Method 1

Step Action

1

Select [Help/Help Topics] from the Main Menu.

2

Input the topic which you are puzzled, for example MSP, and then Select

tag. The U2000 will give some information about MSP.




15

2.3.2 Method 2

Step Action

1 Press the key on any U2000 client windows.




16

Chapter3 Configuring at One Node and Querying

3.1 U2000 Basic Configuration

3.1.1 Customer Option

Step Action

1

Select [File/Preferences] from the Main Menu of the U2000 Client.

2

Select the "Sound Settings" tag, Color settings tag, etc. to set them as your

preferred.

3 Click .




17

3.2 Creating NE

Step Action

1 Right-click in the blank space of the Main Topology.

2

Select [New/NE] .

3

Select NE object type and input the parameter of the NE. For example: OptiX

OSN 8800, and the parameter as below:

Password : password

4 Click .

5 Left click on the main topology to select the position of the NE.




18

3.2.1 Configuring NE Manually

Step Action

1 Double-click the NE: NE 142.

2

Select [Manual Configuration] on the Configuration Mode dialogue box.

3 Click .

4

Click on the Confirm dialogue box.

5 Click on the Confirm dialogue box.




19

6

Click on the Set NE Attribute dialogue box.

7 Click .

8 Click .

9 Click .

Notes:




20

Because this method will initialize the NE, it is often used on the new building site.

3.2.2 Configuring NE by Uploading

Step Action

1 Double-click the NE.

2

Select [Upload] on the Configuration Mode dialogue box.

3 Click .

4

Click on the Confirm dialogue box, and wait for a few minutes;




21

5

Click on the Result dialogue box.

Notes:

Because this method will not interrupt the service, it is often used in the real network. Except these two methods above, there is still another method: [Copy NE Data]. After copy NE Data, need manually modify the different configuration between two NEs.

3.3 Basic Configuration of NE

3.3.1 The Clock Source Configuration

Step Action

1 Right Click the NE: NE142 on the main topologly.

2 Select [NE Explorer].

3 In NE Explorer,Select the SCC board and choose Configuration > Clock Priority

from the Function Tree.

4 Click Query to query clock source priorities.

5 In the clock source list, right-click and choose Add Clock Source from the shortcut

menu. The Add Clock Source dialog box is displayed.




22

6 Click Apply.

3.3.2 Orderwire Configuration

Step Action

1 Right Click the NE: NE142 on the main topologly.

2 Select [NE Explorer].

3 Expand on the Function Tree (left corner).

4

Click .

5 Click Query to query the NE-side information.

6

Select a board from the Available Boards pane in the Orderwire Board Settings

group box and click




23

Notes:

1. Selected board serves as the selected board of the first orderwire.

2. You can also use one SC1 or SC2 board that serves as a non-orderwire

board and set it as the selected board of the second orderwire.

7 Click .

8

Click the General tab.

9

Click Query to query information from the NE.

Note:

1. Call Waiting Time (s) should be set to the same value for all NEs with

orderwire communication. When the number of NEs is smaller than 30,

set the value to 5 seconds. Otherwise, set it to 9 seconds.

2. The telephone number cannot repeat in the same orderwire subnet.

10 Set Call Waiting Time (s), Telephone No. and orderwire ports.

11 Click Apply.




24

3.3.3 Performance Events Configuration

Step Action

1 Select [Configuration/NE Batch configuration/NE Time Synchronization]

from the Main Menu.

2 Select the NE142 and then click , just on the upper-left side.

3 High-light the NE: NE142, right-click the NE142, and choose [Synchronize

with NM Time].

4 Click on the Time Synchronization Operation dialogue box.




25

5 Click on the Result dialogue box.

6

Select [Performance/Set NE Performance Monitoring Time].

7 Select the NE142 and then click , just on the upper-left side.

8

High-light NE142, and then Enable 15-minute and Enable 24-hour as below,

the others set as default.

9

Click

Notes:

U2000 couldnt start the performance immediately. So you have to wait 5 minutes or more until the performance event starts.




26

3.4 User Management

3.4.1 Creating New NMS User

Step Action

1

Select [Administration/ NMS Security/ NMS User Management] from the

Main Menu of the U2000 Client.

2 Click on the upper left side.

3

Right click and select or click on the lower

right side.




27

4

Input as you like, for axample as below: Password: Technologie1

5 Click .

6 Expand User on the left side, and select the new user which you have just

created.

7 Select Tag.

8 Click .




28

9

Choose Authorization Objects and Operation as below, then select the

Selected rights.

10 Click .

11 Select Tag.

12 Click on the lower right side.

13 Select Devices from the Select Domain window.




29

.

14 Click .

3.4.2 Querying NE User

Step Action

1

Select [Administation/NE Security Management/NE User Management] on

the main menu.

2 Select the NEs and click , and query. A few minutes later, all the NE user will

be reported to U2000.




30

3.4.3 Enabling Remote Maintenance User

Step Action

1 Select [Administration/ NMS Security/ Remote Maintenance User

management] from the Main Menu of the U2000 Client.

2 Select the [Enable], and finish the rest of operations as showing in the table.




31

3 Click .

4 Click .

3.5 Browsing Alarm and Performance

3.5.1 Browsing the WDM Performance

Step Action

1 Method 1: Click on the tool bar;

Method 2: Select [Performance/Browse WDM Performance] from the Main Menu.




32

2 Select the NEs and click .

2 Click on the Current Performance Data tag.

3 Select UAT tag .

4 Click on the UAT tag.

5

Here you also can query other performance, eg: History Performance or

Performance Threshold-Crossing Record. The method is the same.

Notes:

Performance wont be reported to U2000 until it is started on the NEs.

3.5.2 Browsing the Event

Step Action

1

Method 1: Click on the tool bar.

Method 2: Select [Fault/Browse Event Logs].

3.5.3 Browsing the Alarm

Method 1: Browsing the whole network alarm




33

Step Action

1

Select [Fault/ NE Alarm Synchronize].


3

Click on the tool bar, the alarm panel about the alarm statistics will be listed

on the U2000 client.

4 Click the red icon on the tool bar, all critical alarms will be listed on the

U2000 client.

5 Click the orange icon on the tool bar, all major alarms will be listed on

the U2000 client.

6 Click the yellow icon on the tool bar, all minor alarms will be listed on

the U2000 client.

7 Click the blue icon on the tool bar, all warning alarms will be listed on

the U2000 client.

Method 2: Browsing the NE alarm.

Step Action

1 Double-click the NE NE142 on the main topology.




34

2 Click from the toolbar of the NE panel to synchronize current alarms.


4 Click from the toolbar of the NE panel to browse current alarms, and then

all the alarms on this NE will be listed on the window.

Method 3: Browsing the board alarm

Step Action

1 Double-click the NE NE142 on the main topology.

2 Right-click the board which has alarm, for example: XCT board.

3

Click on the dialogue box, and then all the alarms on

this board will be listed on the windows.

3.6 Database Backup

3.6.1 U2000 Database Backup

Method 1: Script backup

Ste

p

Action

1 Select [Administration/ Back Up/Restore NMS Data / Import/Export Script

File] from the Main Menu.




35

2 Click .

3 Click on the Input dialogue box.

4

Select Script File Type, Default File Directory, Export, as below:

5 Click .

6 Click on the Confirm dialogue box.


8 Backup other script files, and the steps are the same as above.

Method 2: Database backup

Step Action

1 Select [Administration / Back Up/Restore NMS Data / Database Backup] from

the Main Menu.

2 Click in the Backup dialogue box;




36

Notes:

Here the dialogue box will show you where the U2000 has put the database files.

3 After a few minutes Click ;

3.6.2 NE Database Backup

Step Action

1

Select [Configuration /NE Configuration Data Management] from the Main

Menu.

2 Choose the NE, and then click .

3 High light the NE: NE142.

4

Right click it and select .

5 Click on the confirm dialogue box.

Documents

(15PG) IManager U2000 Basic Operation Practice Guide