1417SGC/WGG14x17 Wireless Flat Panel Detector

Detector Room Sharing

Options

Portable Battery Charger

X-raySource

Wireless Detector

Access Point

X-ray Wireless Access Source Detector Point

lrDA

Contact us 10, Yangnyeong-ro, Yangpyeong-ri, Moga-myeon, Icheon-si, Gyeonggi-do, Republic of KoreaTel : +82-2-449-6906FAX : +82-2-449-6909Website : http://www.sghealthcare.com

Specifications 1417SGC/SCC1417SGC: Csl:TI

ScintillatorType 1417SGG: Gd 022 5:Tb

Dimension 18.1 X 15.1 X0.6 in Weight 6.6 lbs Total Pixel Area 16.7x 14 in Pixel Pitch 127 µm Effective Pixel Matrix 3268X2756 Pixels A/D Conversion 14/ 16 bits Preview time (2x2 binning) sec Energy range 40-150 kVp

Pressure Distributed : 661 lbs Point : 330 Limiting Resolution Min. 2.5 / Max. 3.93 Ip/mm

OperatingTime Typ.4 Hours

(incl. battery)

Superb Image Quality1417SGC/SGG’s high Detector QuantumEfficiency (DQE) achieves superb image qualitywith low patient dose.

Lightweight & Fast417WCC/WGC weighs only 6.61b. Image preview occurs in less than 2 seconds.

High Visibility OLEO Illuminated OLED window brightly indicates flat panel detector status to the user.

Ergonomic Design Curved edges and a non-slip surface makes lifting and handling easier.

Durability

Providing patient throughput in your hospital and beyond

“ ”

Supporting up to 660 lb., the 141 ?WCC / WGC is manufactured with a seamless magnesium, unibody construction and is combined with a shock, vibration, and scratch resistant carbon fiber composition .

Water Resistant (IPX6)1417SGC/SGG is water resistant to most typical water spills in a hospital as well as in outdoor applications.

Product Specifications

1417SGC/SGG (R)

Rev No.

2

Detector

Parameter Spec. Unit

Sensor Type Amorphous Silicon with TFT (Single panel) -

Scintillator Type 1417SGC - CsI:Tl -

1417SGG - Gd2O2S:Tb

Total Pixel Matrix 3328 X 2816 Pixels

Total Pixel Area 422.7 X 357.6 mm

Pixel Pitch 127 μm

Effective Pixel Matrix 3268 X 2756 Pixels

A/D Conversion 14 / 16 bits

Data Transfer 802.11 a/g/n Wireless LAN, up to 300Mbps -

Preview time ≤5 sec

Energy range 40 ~ 150 kVp

MTF (@1lp/mm) 1417SGC - Min. 50 / Typ. 59 %

1417SGG - Min. 50 / Typ. 57

DQE (@0.1lp/mm) 1417SGC - Min. 50 / Typ. 65 %

1417SGG - Min. 36 / Typ. 45

Defective lines ≤10 Lines

Defective pixels ≤19000 Pixels

Dimension 460 X 384 X 15.4 mm

Weight 3.1 (incl. battery) kg

Window material Carbon fiber -

Trigger mode Manual Mode

Auto Trigger Mode (Auto Exposure Detection)

-

Power consumption Typ. 32.2 (Charging & Operating)

Typ. 10.2 (operating only)

Typ. 22 (charging only)

W

Power supply box (Option)

Parameter Spec. Unit

Dimension 188 X 92 X 41.5 mm

Weight 0.5 kg

Input rate 100 ~ 240VAC (50/60Hz) -

Output Typ. 24VDC (Max 1.9A) -

Product Specifications

1417SGC/SGG (R)

Rev No.

2

AGI box (Option)

Parameter Spec. Unit

Dimension 92.5 X 119 X 33.5 mm

Weight 0.3 kg

Cables

Item Spec. Unit

Detector - power link cable (Option) 7 m

P-interface cable (Option) 8 m

Trigger cable (Option) 10 m

Power cord 1.8 m

USB cable (Option) 1.8 m

Ethernet cable (Option) 10 m

Battery

parameter Spec. Unit

Size 236.2 x 127.8 x 6 mm

Weight 0.3 Kg

Input 12.6 VDC

Output 11.1 VDC

Cycle life Max. 500 cycles

Charging time Typ. 3 hours

Capacity Typ. 3400 mAh

Battery Charger

parameter Spec. Unit

Size 200 x 100 x 150 mm

Weight 0.9 kg

Input 20 VDC

Output 12.6 VDC

Product Specifications

1417SGC/SGG (R)

Rev No.

2

Battery Charger Adapter

parameter Spec. Unit

Size 160 x 76 x 43.7 mm

Weight Typ. 0.8 kg

Input 100~240VAC, 47~63Hz, 1.4~0.6A -

Output 20VDC, Max 6.0A -

Environmental Specification

Parameter Spec. Unit

Operating Temperature 5 ~ 40 ℃

Operating Humidity 30 ~ 75 % H.R

Storage Temperature -10 ~ 50 ℃

Storage Humidity 10 ~ 80 % H.R

Partial Pressure Max. 100 (@ 40mm diameter) kg

Overall Pressure Max. 150 kg

Product Specifications

1417SGC/SGG (R)

Rev No.

2

Defect Condition

Item Min. Typ. Max. Unit Note

Number of Normal Lines between

1defective line and 1defective line 4 Lines

Number of Normal Lines between

1defective line and 2defective lines 4 Lines

Number of Normal Lines between

2defective lines and 2defective lines 10 Lines

Number of adjacent defective lines 2 Lines

Total Pixel Defects 19000 Pixels

Total Line Defects 10 Lines

Definition of Defect

“Defect conditions #1”for tested dark frames:

- Pixel value is lesser than LOCAL_HORZ_MEDIAN-[Low]

Pixel value is lesser than LOCAL_VERT_MEDIAN-[Low]

- Pixel value is bigger than LOCAL_HORZ_MEDIAN+[High]

Pixel value is bigger than LOCAL_VERT_MEDIAN+[High]

“Defect conditions #2”for tested bright frames:

- Pixel value is lesser than LOCAL_AVERAGE-Low_Lim

- Pixel value is bigger than LOCAL_AVERAGE+High_Lim

whereLow_Lim= FRAME_MEDIAN*[Low]

High_Lim= FRAME_MEDIAN*[High]

LOCAL_AVERAGE is moving average of pixel’s surround within [Radius]

Defect Inspection

1) Integration time 0.5 second.

2) Inspection by human eye.

Pixel defect indicates pixel which is determined by test software. Total pixel

defects(in effective area) is sum of offset defects and substrate transmission map

defects.

Product Specifications

1417SGC/SGG (R)

Rev No.

2

#1 Drawings