Machine frame for refurbishment

Suspension 1:1

From 450 to 1.600 mm. distance between ropes.

Tornado series

Two diverting pulleys

One diverting pulley

2015

/07

Type D-60-3 Roping factor

Sheave diameter (mm)

Duty load (kg)

Nominal torque (Nm)

Maximum torque required (Nm)

Maximum torque (Nm)

Suspension ropes diameter (mm)

Rated speed (m/s)

Load on shaft (kg)

Maximum load on shaft* (kg)

Duty cicle

Rated current (A)

Power (KW)

Maximum current (A)

Maximum power (KW)

Speed (rpm)

Frequency (Hz)

Poles

Voltage

Bed frame joint

Weight (kg)

Encoder

Thermal sensor

2:1

240

450

150

1267

225

6,5

1

812

1200

35

11,6

4,1

16,3

6,2

159

21,2

16

400

4xM20

160

HEIDENHAIN ECN

413

SELECTED TORNADO:

All

right

s re

serv

ed. S

peci

�cat

ions

are

sub

ject

to c

hang

e w

ithou

t pre

viou

s no

tice.

D-360

Type A (mm) B (mm) C (mm) E (mm) F (mm) G (mm)

D-60 330

330

330

330

330

330

330

409

409

409

409

409

409

409

280

280

280

280

280

280

280

180

180

180

180

180

180

180

180

200

240

280

360

420

500

135

135

135

135

115

115

115

D-80

D-120

D-160

D-220

D-280

M

4xM20x35

4xM20x35

4xM20x35

4xM20x35

4xM20x35

4xM20x35

4xM20x35

Sheave diameter (mm) Number of ropes Length between grooves (mm) H (mm) I (mm)

4, 5, 6

7, 8, 9

10, 11, 12

4, 5

6, 7

8, 9, 10

14

14

14

12

12

12

79

100

121

67

79

97

134

176

218

110

134

170

320

240

Sheave protection cover Suspension 1:1 / 2:1

These are indicative values, check the proper Tornado to your installation using the software GSS (Gearless Selection Software), which is available in www.dynatech-elevation.com customers area, or contact our technical department.

All TORNADO models can be used to ful�ll the UNE-EN 81-20:2014 & UNE-EN 81-50:2014 standard.

Manual rescue system Suspension 1:1 / 2:1

D-60 / D-80 / D-120 / D-160 / D-220 / D-280 / D-360

FEATURES: Depending on the installation conditions, the rated load of each machine can change. Use GSS software to select the proper machine for your installation.

*(1) Standard speeds up to 1.6 m/s. If you need a speed di�erent from the standards, please contact our technical department.*(2) Maximum load calculated for counterweight factor 50%, starting car acceleration 0.5 m/s2, fans (if they are available as option) and duty cycle 35%.*(3) Maximum load calculated for a lifetime over 35. 000 hours, Standard applied ISO 281:1991.

Max. torque (Nm)

225

300

450

600

825

1.050

1.350

Max. load on shaft (kg) *(3)

1.300

1.200

1.500

1.400

2.500

2.400

3.000

2.500

3.500

2.800

3.500

2.800

3.800

3.100

Weight (Kg)

150

160

180

220

250

300

360

Type*(1)

D-60 D-80 D-120 D-160 D-220 D-280 D-360

Roping factor

1:1

2:1

1:1

2:1

1:1

2:1

1:1

2:1

1:1

2:1

1:1

2:1

1:1

2:1

Sheave diameter (mm)

240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320 240 320

Max. rated load (kg) *(2)

225 *(2) 150 *(2) 450 *(2) 320 *(2) 320 *(2) 225 *(2) 630 *(2) 450 *(2) 450 *(2) 320 *(2) 800 *(2) 630 *(2) 630 *(2) 450 *(2) 1.000 *(2) 800 *(2) 800 *(2) 630 *(2) 1.250 *(2) 1.000 *(2) 1.000 *(2) 800 *(2) 1.500 *(2) 1.250 *(2) 1.250 *(2) 1.000 *(2) 2.100 *(2) 2.000 *(2)

Rated torque (Nm)

150

150

210

210

300

280

420

360

550

450

700

550

900

Rope diameter (mm)

6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8 6, 6.5, 6.7

8

*Maximum load calculated for a working life over 35.000 hours, according to standard ISO 281:1991.

INCLUDED:Encoder Heidenhain ECN 413 with 5m cable lenght (without connector)Thermal sensor PTCPackagingEncoder protectionRopes protectionPosition detectors on each brake

NOT INCLUDED:Screws 4xM20 Power suply cable Rope clampBrake hand release (Not available for D-360, D-280 and D-220 models)Brake over-exciterEncoder cable 10m. Sheave protection cover Manual rescueEncoder connector

New traction equipmentdesigned and manufactured by Dynatech.

E�ciency and power with all the safety of a leader.

GSS Gearless Selection Software

The GSS (Gearless Selection Software) helps you choose the model of machine and sheave for your installation according to the criteria of the UNE-EN 81-20:2014 & UNE-EN 81-50:2014.