Upload
rohanmanimani
View
216
Download
0
Tags:
Embed Size (px)
DESCRIPTION
asdd
Citation preview
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 1 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
LOCATION 1:
AT LABORATORY
1. CALIPER (DIGITAL/ DIAL/ VERNIER)L.C. 0.01 mm 0 mm to 600 mm 13.0 µm Using Gauge Block Set
& Long Slip GaugesL.C. 0.01 mm 0 mm to 1000 mm 25.0 µmL.C. 0.01mm / 0.02 mm 0 mm to 3000 mm 35.0 µm
2. HEIGHT GAUGE (DIGITAL/ DIAL/ VERNIER)L.C. 0.0001 mm 0 mm to 300 mm 4.0 µm Using Gauge Block Set
& Long Slip Gauge SetL.C. 0.0001 mm 0 mm to 600 mm 6.5 µmL.C. 0.01 mm 0 mm to 1000 mm 13.0 µm
3. DEPTH GAUGE (DIGITAL/ DIAL/ VERNIER)L.C. 0.01 mm 0 mm to 600 mm 9.0 µm Using Gauge Block Set
& Long Slip Gauge SetL.C. 0.01 mm 0 mm to 1000 mm 17.0 µm
4. MICROMETER (DIGITAL/ EXTERNAL)L.C. 0.001 mm 0 mm to 50 mm 1.1 µm Using Gauge Block Set
& Long Slip Gauge SetL.C. 0.001 mm 50 mm to 100 mm 1.4 µmL.C. 0.001 mm 100 mm to 300 mm 4.0 µmL.C. 0.001 mm 300 mm to 600 mm 7.0 µmL.C. 0.01 mm 600 mm to 1200 mm 14.0µm
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 2 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
LOCATION 1:
5. MICROMETER SETTING STANDARDS
25 mm to100 mm 2.5 µm Using Gauge Block Set, Long Slip Gauge Set &
Lever Dial Gauge100 mm to 600 mm 5.0 µm600 mm to 1175 mm 10.0 µm
6. MICROMETER HEAD (DIGITAL / EXTERNAL)L.C. 0.001 mm 0 mm to 50 mm 2.0 µm Using ULML.C. 0.001 mm 50 mm to100 mm 2.0 µm
7. PITCH MICROMETERL.C. 0.001 mm 0 mm to 100 mm 1.4 µm Using Gauge Block Set
& Long Slip Gauge SetL.C. 0.01 mm 0 mm to 300 mm 7.0 µm
8. GROOVE MICROMETERL.C. 0.01 mm 0 mm to 100 mm 6.0 µm Using Gauge Block Set
9. HOLTEST / THREE POINT MICROMETERL.C. 0.001 mm Upto 120 mm 4.5 µm Using Setting Ring
Gauge
10. DEPTH MICROMETER (DIGITAL/ DIAL/ EXTERNAL )L.C. 0.001 mm 0 mm to 150 mm 2.0 µm Using Gauge Block Set
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 3 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
& Long Slip Gauge SetL.C. 0.001 mm 150 mm to 300 mm 5 .0 µmLOCATION 1:
11. INSIDE MICROMETER (STICK/ TUBULAR TYPE)L.C. 0.01 mm 13 mm to 500 mm
stick size10.0 µm Using Long Slip Gauge
Set, Gauge Block Set &Lever Dial Gauge
12. INSIDE MICROMETER (CALIPER TYPE)L.C. 0.001 mm 5 mm to 50 mm 1 .0 µm Using Gauge Block SetL.C. 0.01 mm 5 mm to 300 mm 7.0 µm
13. DIAL GAUGE (PLUNGER TYPE)L.C. 0.001 mm 0 mm to 5 mm 2.0 µm Using ULML.C. 0.01 mm 0 mm to 100 mm 6.0 µm
14. DIAL GAUGE STAND(FLATNESS OF BASE)
- 4.0 µm Using Lever Dial Gauge
15. DIGITAL INDICATOR/ LVDT/ ELECTRONIC PROBEL.C. 0.0001 mm 0 mm to 2 mm 1.0 µm Using ULM & Gauge
Block SetL.C. 0.001 mm 0 mm to 50 mm 1.0 µm
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 4 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
L.C. 0.006 mm 0 mm to 100 mm 4.0 µm
LOCATION 1:
16. THICKNESS GAUGE (DIGITAL/DIAL)L.C. 0.001 mm 0 mm to 1 mm 1.0 µm Using Gauge Block SetL.C. 0.01 mm 0 mm to 25 mm 6.0 µm
17. DIAL GAUGE (LEVER TYPE / LEVER DIAL GAUGES)L.C. 0.001 mm 0 mm to 0.14 mm 2.0 µm Using ULML.C. 0.002 mm 0 mm to 0.6 mm 2.2 µmL.C. 0.01 mm 0 mm to 1.6 mm 4.0 µm
18. BORE GAUGE (Plunging Upto 1 mm travel only)
any size 4.2 µm Using Dial Calibration Tester & Dial Gauge
19. MEASURING RULEL.C. 0.5 mm 0 mm to 2000 mm
120x √ L200 m
L in mm
Using Profile Projector
20. MEASURING TAPE/ PI TAPEL.C. 0.1 mm 0 to 5.5 m 490x √L m
L in m
Using Steel Rule
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 5 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
L.C. 1 mm 0 to 100 m 490x √L mL in m
LOCATION 1:
21. TAPER SCALEL.C. 0.1 mm 1 mm to 45 mm 17.0 µm Using Profile Projector
22. BEVEL PROTRACTOR / COMBINATION SETL.C. 5 min 0 to 90 ° 4 arc min Using Angle Gauges
23. PROTRACTOR / INCLINOMETERL.C. 0.01 ° 0 to 90 ° 1 arc min Using Gauge Block Set
& Sine Bar
24. SPIRIT LEVELL.C. 20 µm/m Upto 300 mm (base) 5.0 µm/m Using Electronic Spirit
Level
25. COATING THICKNESS GAUGEL.C. 0.001 mm 0 to 8000 µm 8.0 µm Using Elcometer Foils
26. FOILSL.C. 0.001 mm 0 to 8000 µm 1 .0 µm Using ULM
27. VEE BLOCK
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 6 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
(FLATNESS, PARALLELISM)
450mm(L)x150mmx150 mm
3 .0 µm Using Lever Dial Gauge & Cylindrical Setting
Master
LOCATION 1:
28. CALIPER GAUGE (DIAL/DIGITAL) (INTERNAL TYPE)L.C. 0.005 mm 2.5 mm to 17.5 mm 5.0 µm Using Setting Ring
GaugeL.C. 0.01 mm 5 mm to 100 mm 8.0 µmL.C. 0.05 mm 16 mm to 120 mm 30.0 µm
29. PIN GAUGE Upto 50 mm 2.0 µm Using ULM
30. PLAIN PLUG GAUGE (PARALLEL)
Upto 50 mm 3.0 µm Using ULM50 mm to 100 mm 3.0 µm
100 mm to 300 mm 6.2 µm
31. CYLINDRICAL SETTING MASTER
Upto 50 mm 2.0 µm Using ULM50 mm to 100 mm 3.0 µm100 mm to 200 mm 4.0 µm200 mm to 300 mm 5.0 µm
32. PLAIN RING GAUGE (PARALLEL)
Upto 50 mm 3.0 µm Using ULM50 mm to 100 mm 3.0 µm100 mm to 300 mm 6.2 µm
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 7 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
33. SETTING RING (PARALLEL)
Upto 30 mm 2.0 µm Using ULM30 mm to 100 mm 2.0 µm100 mm to 250 mm 3.0 µm250 mm to 300 mm 3.1 µm
LOCATION 1:
34. THREAD PLUG GAUGE (PARALLEL)
Upto M50 2.3 µm Using ULM
Using Thread Measuring Wires &ULM
M50 to M100 3.3 µmM100 to M300 7.3 µm
35. THREAD RING GAUGE (PARALLEL)
M2 to M50 2.5 µm Using ULMM50 to M100 3.1 µmM100 to M300 8.3 µm
36. PLAIN PLUG GAUGE (TAPER)
Upto 50 mm 2.1 µm Using ULM50 mm to 100 mm 3 .0 µm100 mm to 300 mm 6.2 µm
37. THREAD PLUG GAUGE (TAPER)
Upto M 50 2.7 µm Using ULM
Using Thread Measuring Wires & ULM
M50 to M100 3.0 µmM100 to M300 7.3 µm
38. FEELER GAUGE Upto 1 mm 2.0 µm Using ULM
39. GAP / SNAP GAUGE Upto 50 mm 2.0 µm Using Gauge Block Set
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 8 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
& Long Slip Gauge Set50 mm to 100 mm 3.0 µm100 mm to 400 mm 7.0 µm
LOCATION 1:
40. OTHER LIMIT GAUGESUsing Gauge Block Set
& Profile ProjectorHeight, Depth, Length 0mm to 300 mm 6.0 µm
41. RADIUS GAUGE 0.4 mm to 25 mm 11.0 µm Using Profile Projector
42. PITCH GAUGE 0.35 mm to 7 mm 14.0 µm Using Profile Projector
43. TEST SIEVES 0.020 mm to 125 mm 15.0 µm Using Profile Projector
44. ENGINEER SQUARE / TRY SQUARE
Upto 450 mm 8.5 µm Using Try Square Master & 2D-Height
Gauge
45. SINE BAR Upto 250 mm Angularity
52 arc sec Using Angle Gauges, Gauge Blocks & Lever Dial Gauge
46. OCULAR / GRATICULE Angle: 360 ° 15 arc sec Using Profile ProjectorLinear: 25 mm 16 µm
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 9 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
47. SURFACE ROUGHNESS SPECIMEN
Ra 8% Using Roughness Standard
LOCATION 1:
48. CALIPER CHECKER 0 mm to 300 mm 3.0 µm Using Gauge Block Set, 0 mm to 600 mm 7.0 µm Long Slip Gauge Set &0 mm to 1000 mm 9.0 µm Lever Dial Gauge
49. HEIGHT MASTERL.C. 0.001 mm 5mm to 310 mm 3.0 µm Using Gauge Block Set,
Long Slip Gauge Set & Lever Dial Gauge
50. RISER BLOCK 0mm to 300 mm 2.0 µm Using Gauge Block Set & Long Slip Gauge Set0mm to 600 mm 4.0 µm
51. CALIBRATION TESTERL.C. 0.0001 mm 0mm to 25 mm 1.5 µm Using Gauge Block Set
52. GAUGE BLOCKS 0mm to 25 mm 0.14 µm Using Gauge Block Calibrator & Gauge Block Set (Grade-K)
25mm to 50 mm 0.20 µm50mm to 100 mm 0.30 µm
53. LENGTH BAR 100mm to 500 mm 4.0 µm Using Long Slip Gauge Set & Electronic Probe
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 10 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
54. DEPTH MICROCHECKER
0 mm to 300 mm 2.0 µm Using Gauge Block Set
LOCATION 1:
55. THREAD MEASURING WIRES
0.17 mm to 6.35 mm 1.0 µm Using ULM
PRESSURE & VACUUM
56. GAUGE PRESSURE (HYDRAULIC)Gauge/ Transducer/ Transmitter/ Recorder/Logger/ Calibrator/ Modules/ SwitchesManometers
7 bar to 55 bar 0.085 % of rdg Using Dead Weight Tester, DH Budenberg
580 HX 55 bar to 1100 bar 0.035 % of rdg
1100 bar to 2068 bar 0.75 % FS Using High Pressure Transmitter 2068 bar to 4130 bar 0.85 % FS
57. GAUGE PRESSURE (PNEUMATIC)Gauge/ Transducer/ Transmitter/ Recorder/Logger/ Calibrator/ Modules/ Switches /Manometers
0 to 1 bar 0.12 % FS Using Digital Pressure Gauge SN 15 x P2
1 bar to 25 bar 0.024 % rdg Using Dead Weight Tester, Pressurements,
T 3500/1
Using Fluke Pressure 25 bar to 30 bar 0.037 % FS
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 11 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
Calibrator 9375071530 bar to 34 bar 0.14 % FS
LOCATION 1:
58. DIFFERENTIAL PRESSURE (PNEUMATIC)Gauge/ Transducer/ Transmitter / Recorder /Logger / Calibrator / Modules/ Switches/Magnehelic Gauges/ Manometers
0 to 2 inH2O 0.18 % FS Using Microtector water manometer, MM 014876
0 to 2 inHg 0.21 % FS Using Dwyer Mercury Manometer, NL/M/004
0 to 350 mbar 0.18% FS Using Fluke Pressure Module 700 P03 with
digital indicator
59. ABSOLUTE PRESSUREGauge/ Transducer / Transmitter/ Recorder /Logger/ Calibrator / Modules/ Switches /Barometer
0.2 bar abs to 2 bar abs 0.12 % FS Using Pressure Transducer (abs) with
DPI 610
60. VACUUM Gauge/ Transducer/ Transmitter/ Recorder/Logger/ Calibrator/ Modules/ Switches
-0.98 bar to 0 bar 0.12 % FS Using Digital Pressure Gauge SN 15 X P2
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 12 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
61. DEAD WEIGHT TESTER 10 bar to 55 bar 0.01% rdg Using Dead Weight Tester, DH Budenberg-
580 HXby Cross Float Method
(Hydraulic) 55 bar to 1100 bar 0.014% rdg
LOCATION 1:
62. ACOUSTIC PRESSURESound Level Meter 1kHz
94 dBA 1.02% rdg Using Sound Level Calibrator 114 dBA 1.19 % rdg
TORQUE
63. TORQUE WRENCH/DRIVERS(Indicating/ Setting), Torque Meters
0.05Nm to 12.5 Nm 1.10% Using Norbar Static Transducer & T T T
as per ISO 6789
10Nm to 150 Nm 0.64% Using Sushma Static Transducer & T T T
as per ISO 6789
150Nm to 1350 Nm 0.80% Using Norbar Static Transducer & T T T
as per ISO 6789
1350Nm to 3000 Nm 0.80% Using Norbar Static Transducer & T T T
as per ISO 6789
64. FORCE
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 13 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
PUSH PULL GAUGE 15N to 2000N 0.30% Using SS Push pull Weights with Hanger as
per IS:4169
LOCATION 1:
65. HARDNESS Hardness Tester Shore A 0 to 100 % SHA 0.95% Using SS shore A weights
as per ASTM D224
Hardness Tester Shore B 0 to 100 % SHD 1.1% Using SS shore D weights as per ASTM D224
MASS66. WEIGHTS 1 mg 0.014 mg Using Sartorious E2 Class
Weights2 mg 0.014 mg 5 mg 0.014 mg 10 mg 0.014 mg 20 mg 0.014 mg 50 mg 0.015 mg100 mg 0.016 mg200 mg 0.018 mg500 mg 0.020 mg
1 g 0.020 mg2 g 0.022 mg5 g 0.024 mg10 g 0.028 mg20 g 0.030 mg50 g 0.04 mg100 g 0.17 mg200 g 0.17 mg500 g 9.44 mg1 kg 10.0 mg Using Denver SS Weights
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 14 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
2 kg 12.0 mg5 kg 30.5 mg Using Brass Weights10 kg 1.8 g20 kg 5g50 kg 9.4 g Using Intermediate Weights
LOCATION 1:
67. DENSITYHydrometers/ Alcoholmeters
0.65 g/ml to 1.20 g/ml1.20 g/ml to 1.60 g/ml
0.0015 g/ml0.0021 g/ml
Using Std. Density Hydrometers & Std.
Specific Gravity Hydrometers
VOLUME
68. VOLUMETRIC APPARATUS (Pipettes, Burrettes, Measuring Cylinders, Standard Flasks, Graduated Jar, Volumetric Glasswares
10 µl to 100 µl100 µl to 1000 µl
1000 µl to 320 mL320 mL to 1000 mL1000 mL to 2000 mL2000 mL to 5000 mL
0.55 µl0.66 µl
5 µl1 ml
12.5 ml14.52 ml
Using Standard E2 Class Weights & Electronic
Balance
Using Denver SS Weights & Electronic Balance
Micropipettes 1 µl to 10 µl10 µl to 100 µl
100 µl to 1000 µl1 ml to 10 ml
0.12 µl0.13 µl0.15 µl4.75 µl
Using Micro Balances
69. RPM TACHOMETERS(NON-CONTACT)
100 rpm to 1000 rpm 1000 to 90000 rpm
1.0 % rdg1.0% rdg to 0.1% rdg
Using Digital Tachometer
AT SITE
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 15 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
70. GAUGE BLOCK CALIBRATORL.C. 0.00001 mm 0.5mm to 100 mm 0.04 µm Using Set of 11 Gauge
Block/Pair of ' K' Grade
LOCATION 1:
71. CALIPERS (VERNIER / DIGITAL/ DIAL)L.C. 0.01mm / 0.02 mm 0 mm to 3000 mm 50.0 µm Using Gauge Block Set
Using Long Slip Gauge Set
72. 2D HEIGHT GAUGE (DIGITAL/ DIAL/ VERNIER)L.C. 0.0001 mm 0 mm to 600 mm 10.0 µm Using Gauge Block
Set/Long Slip Gauge Set
73. PROFILE PROJECTOR/ VIDEO MEASURING MACHINELinear Scale 300 mm x 200 mm 14.0 µm Using Glass ScaleAngular 360° 37 arc sec Using Angle GaugesMagnification Upto 100X 0.16% Using Precision Ball
74. MICROSCOPELinear Scale 0mm to 300 mm 14.0 µm Using Glass Scale
Magnification Upto 100X 0.16% Using Precision Ball
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 16 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
75. SURFACE PLATE 200mm x 200 mm to 3500 mm x 3000 mm
1.4x √ L+W200 mL and W are in mm
Using Electronic Spirit Level
LOCATION 1:
76. UNIVERSAL LENGTH MEASURING MACHINE
Up to 100 mm 1.0 µm Using Gauge Block Set100 mm to 300 mm 2.3 µm
77. 3D CO-ORDINATE MEASURING MACHINE
2000mm x 1000mm x 1000mm
(5.4+4.75 L) µmL is in m
Using Gauge Block Set & Long Slip Gauge Set
PRESSURE & VACUUM78. PRESSURE
(PNEUMATIC)Gauge/ Transducer/ Transmitter/ Recorder/Logger/ Calibrator / Modules Switches/Manometers
0 to 20 bar 0.15 % FS Using Druck Digital Pressure Calibrator
Using Keller Digital Pressure Gauge
20 bar to 30 bar 0.17 % FS
79. DIFFERENTIAL PRESSURE (PNEUMATIC)Gauge/ Transducer / Transmitter/ Recorder/Logger/ Calibrator/
0 to 70 m bar 0.1 % of FS Using Low Pressure Digital Calibrator
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 17 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
Modules/ Switches/Magnehelic Gauges / Manometers
0 to 1 inH2O 0.7 % FS Using Digital Manometer0 to 4 inH2O 1 % FS0 to 20 inH2O 0.7 % FS
LOCATION 1:
80. ABSOLUTE PRESSUREGauge/ Transducer/ Transmitter/ Recorder/Logger / Calibrator/ Modules/ Switches
0.2 bar abs to 1.6 bar abs 0.46 % FS Using Pressure Calibrator HUBA
81. PRESSURE (HYDRAULIC)Gauge/ Transducer/ Transmitter/ Recorder/Logger/ Calibrator/ Modules/ Switches
0.7 bar to 690 bar 0.06% FS Using Fluke Pressure Module 0 to 700 bar 0.16% FS
82. VACUUMGauge/ Transducer/ Transmitter/ Recorder/Logger/ Calibrator/ Modules/ Switches
-0.93 bar to 0.0 bar 0.13% of FS Using Fluke Pressure Module -1 bar to 2 bar
83. HARDNESSRockwell Hardness Tester HRA 1.44 HRA Using Standard Hardness
Blocks as per IS 1586HRB 1.47 HRBHRC 1.47 HRC
Brinell Hardness Tester HBW 2.5 /187.5 3% Using Brinell hardness
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 18 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
blocks as per IS:2281HBW 5 /750 2.80%HBW 10 /3000 2.80%
Vickers Hardness Tester HV 1 2.40% Using Vickers Hardness Blocks as IS: 1754HV 5 2.40%
HV 10 1.80%HV 30 1.90%
LOCATION 1:
84. MASS WEIGHING BALANCE 1 mg to 80 g 0.083 mg Using Sartorious E2 Class
Weights 80 g to 220 g 0.52 mg 220 g to 320 g 0.54 mg320 g to 6.2 kg 19.0 mg Using Denver SS Weights 6.2 kg to 15 kg 0.3 g 15 kg to 30 kg 4.0 g
30 kg to 60 kg 12.2 g Using Brass Weights60 kg to 300 kg 66 g
300 kg to 1000 kg 243 g Using Cast Iron Weights
85. RPM MEASUREMENT (NON-CONTACT)
30 rpm to 500 rpm500 rpm to 20000 rpm
1.0% rdg1.0% rdg to 0.1 % rdg
Using Digital Tachometer
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 19 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
LOCATION 2:
AT LABORATORY
86. CALIPER (DIGITAL/ DIAL/ VERNIER)L.C. 0.01 mm 0 mm to 600 mm 13 µm Using Gauge Blocks Set
& Caliper Checker
87. HEIGHT GAUGE (DIGITAL/ DIAL/ VERNIER)L.C. 0.0001 mm 0 mm to 300 mm 3.0 µm Using Gauge Blocks Set
& Caliper CheckerL.C. 0.0001 mm 0 mm to 600 mm 9.0 µm
88. DEPTH GAUGE (DIGITAL/ DIAL/ VERNIER)L.C. 0.01 mm 0 mm to 300 mm 9.0 µm Using Gauge Blocks Set
89. MICROMETER (DIGITAL/EXTERNAL)L.C. 0.001 mm 0 mm to 50 mm 1.5 µm Using Micrometer
Check Set & Gauge L.C. 0.001 mm 50 mm to100 mm 2.0 µm
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 20 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
Blocks SetL.C. 0.001 mm 100 mm to 300 mm 3.1 µm
90. MICROMETER SETTING STANDARDS
25 mm to100 mm 2.1 µm Using Gauge Blocks Set & Lever Dial Gauge100 mm to 275 mm 5.0 um
LOCATION 2:
91. PITCH MICROMETERL.C. 0.001 mm 0 mm to 100 mm 3.0 µm Using Micrometer
Check Set & Gauge Blocks Set
L.C. 0.01 mm 0 mm to 300 mm 6.1 µm
92. GROOVE MICROMETERL.C. 0.01 mm 0 mm to 100 mm 6.0 µm Using Micrometer
Check Set
93. DEPTH MICROMETER (DIGITAL/ DIAL/ EXTERNAL )L.C. 0.001 mm 0 mm to 150 mm 3.0 µm Using Gauge Blocks Set
& Micrometer Check Set
94. INSIDE MICROMETER (STICK/ TUBULAR TYPE)L.C. 0.01 mm Upto 300 mm
stick size10.0 µm Using Gauge Blocks
Set, Micrometer Check Set, Lever Dial Gauge
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 21 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
& Universal V Block
95. INSIDE MICROMETER (CALIPER TYPE)L.C. 0.001 mm 0 mm to 50 mm 3.0 µm Using Gauge Blocks Set
& Precision ViceL.C. 0.01 mm 0 mm to 50 mm 7.5 µm
LOCATION 2:
96. DIAL GAUGE (PLUNGER TYPE)L.C. 0.001 mm 0 mm to 5 mm 4.0 µm Using Dial Calibration
Tester & Gauge Blocks Set
L.C. 0.01 mm 0 mm to 100 mm 6.0 µm
97. DIAL GAUGE (LEVER TYPE/ DIAL TEST INDICATORS)L.C. 0.001 mm 0 mm to 0.14 mm 4.0 µm Using Dial Calibration
TesterL.C. 0.002 mm 0 mm to 0.6 mm 4.0 µmL.C. 0.01 mm 0 mm to 1.6 mm 6.0 µm
98. DIAL GAUGE STAND(FLATNESS OF BASE) - 4.0 µm Using Lever Dial Gauge
99. DIGITAL INDICATOR (PLUNGER TYPE)L.C. 0.0001 mm 0 mm to 2 mm 1.6 µm Using Gauge Blocks SetL.C. 0.001 mm 0 mm to 50 mm 2.0 µm
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 22 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
L.C. 0.006 mm 0 mm to 100 mm 4.0 µm
100. THICKNESS GAUGE (DIGITAL/DIAL)L.C. 0.001 mm 0 mm to1 mm 3.0 µm Using Gauge Blocks SetL.C. 0.01 mm 0 mm to 25 mm 6.0 µm
LOCATION 2:
101. MEASURING TAPE/ PI TAPEL.C. 0.1 mm 0 mm to 5.5 m 490x √L m
L in m
Using Steel Rule
L.C. 1 mm 0 mm to 100 m 490x √L mL in m
102. COATING THICKNESS GAUGEL.C. 0.001 mm 0 um to 1000 µm 8.0 µm Using Elcometer Foils
103. FOILS Using Dial Thickness Gauge, 25 Dig MicL.C. 0.001 mm 0 µm to 8000 µm 4.0 µm
104. VEE BLOCK (FLATNESS, PARALLELISM)
450 mm(L) x150 mm x150 mm
3.0 µm Using CMM
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 23 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
105. CALIPER GAUGE (DIAL/DIGITAL) (INTERNAL TYPE)L.C. 0.005 mm 2.5 mm to 50 mm 6.0 µm Using Gauge Blocks Set
106. PIN GAUGE Upto 50 mm 4.0 µm Using Digital Micrometer
LOCATION 2:
107. PLAIN PLUG GAUGE (PARALLEL)
Upto 50 mm 4.0 µm Using Digital Micrometer50 mm to 150 mm 6.0 µm
108. PLAIN RING GAUGE (PARALLEL)
Upto 50 mm 4.0 µm Using Inside Micrometer
109. THREAD PLUG GAUGE (PARALLEL)
Upto M 50 4.0 µm Using Digital Micrometer & Thread
Measuring WiresM 50 to M150 7.0 µm
110. PLAIN PLUG GAUGE (TAPER)
Upto 50 mm 4.0 µm Using CMM50 mm to 150 mm 7.0 µm
111. FEELER GAUGE Upto 1 mm 4.0 µm Using Digital Micrometer
112. GAP / SNAP GAUGE Upto 50 mm 4.0 µm Using CMM
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 24 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks
50 mm to 100 mm 7.0 µm100 mm to 300 mm 9.0 µm
113. LIMIT GAUGES FOR 0 mm to 300 mm 6.0 µm Using CMMHeight, Depth, Length
114. STRAIGHT EDGE / PARALLEL BARS
Upto 600 mm 4.0 µm Using CMM
LOCATION 2:
115. CALIPER CHECKER 0mm to 300 mm 3.0 µm Using Gauge Blocks Set & CMM
116. PRECISION FLAT/ MASTER FLAT, PARALLEL BARS, ANGLE GAUGES, MANDRELS, CONCENTRICITY GAUGE & MASTER CYLINDER
CMM Co-Ordinate Measuring Machine
(Straightness, Roundness, Concentricity, Cylindericity, Perpendicularity, Parallelism, Flatness, Precision Flat/ Master Flat)
500 mm x 500 mm x 500 mm
5.4 µm
* Measurement Capability is expressed as an uncertainty () at a confidence probability of 95%
Laboratory NorthLab (India) Pvt. Ltd., Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu, Veppampattu, ChennaiLocation 1: Plot No. 193, Door No. 55, Chellimman Nagar, Perumalpattu,
Veppampattu, ChennaiLocation 2: No. 23, Tiny Sector, Ambattur Industrial Estate, Chennai
Accreditation Standard ISO/IEC 17025:2005
Field Mechanical Calibration Issue Date 17.05.2012
Certificate Number C-0196 Valid Until 16.05.2014
Last Amended on 11.06.2012 Page 25 of 25
Quantity Measured/Instrument
Range / Frequency *Calibration Measurement Capability ()
Remarks