DIPENDRA K DABHI136400307016

Practical :– 2 AIM :– Configure a router (Ethernet & Serial Interface) using router

commands including access lists on any network simulator (eg.

packet Tracer)

Opening Screen Of Cisco Packet Tracer

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

In this scenario connection is establish between LAB1 and LAB2 within two routers 1st router is placed at lab1 and another is placed at lab2.

Sence the lab1 router is configured with lab1 pc, hear pc1 is request to access pc1 of lab2 the path is route from router >route2>pc-pt

Configuration of pc-pt-1

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

Ip Configuration of PC-PT-1 & PC-PT-2. Set IP Configuration of PC-PT-1 & PC-PT-1 in Static.

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

Set port Status in ROUTER-1/ Fast Ethernet 0/0 & Fast Ethernet 0/1 in configuration.

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

Set port Status in ROUTER-2/ Fast Ethernet 0/0 & Fast Ethernet 0/1 in configuration.

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

Add Network Address in ROUTER-1 & ROUTER-2.

THE COMPLET NETWORK BETWEEN TO TWO PC .

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

Now using Switch we connect two router(labs).

1 SWITCH CONNECTIONS.

PC IP ADDRESS SUBNET MASK DIFAULT GETWAY

172.15.3.80 172.15.3.80 255.255.0.0 172.15.1.1

172.15.3.81 172.15.3.81 255.255.0.0 172.15.1.1

172.15.3.82 172.15.3.82 255.255.0.0 172.15.1.1

172.15.3.83 172.15.3.83 255.255.0.0 172.15.1.1

2 SWITCH CONNECTIONS.

PC IP ADDRESS SUBNET MASK DIFAULT GETWAY

172.14.3.80 172.14.3.80 255.255.0.0 172.14.1.1

172.14.3.81 172.14.3.81 255.255.0.0 172.14.1.1

172.14.3.82 172.14.3.82 255.255.0.0 172.14.1.1

172.14.3.83 172.14.3.83 255.255.0.0 172.14.1.1

ROUTER CONNECTION. R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

ROUTER 172.16.3.84 172.16.3.81

FASTETHERNET 0/0 172.15.1.1 172.14.1.1

FASTETHERNET 0/1 172.16.3.84 172.16.3.81

PORT STATUS ON ON

RIP 172.15.0.0

172.16.0.0

172.14.0.0

172.15.0.0

172.16.0.0

172.14.0.0

SWITCH PORT

CONNECTED

YES YES

Connect the switch connecter on the router PHYSICAL DEVICE VIEW > WIC-1T > OFF THE POWER SWITCH

>CONNECT THE SWITCH CONNECTER>ON THE POWER SWITCH

AFFTER PASSING MESSAGE TO ONE NETWORK TO ANOTHER NETWORK

R.C.T.I AHEMDABAD|

DIPENDRA K DABHI136400307016

R.C.T.I AHEMDABAD|