Product Catalogue

product catalogue 02

ZINTEK® IN THE BUILDING INDUSTRY

The tradition of using zinc rolled sections in building dates way back, and is the most widely used non-ferrous material for roofi ng and cladding in Europe.

With the zintek® rolled section, Simar offers an interesting combination of technical and aesthetic performances that is valuable in practical and economic terms.

Zintek® rolled section is at the highest levels for:• Respect for the environment• Economic with respect to non-ferrous metals used in the same applications.• Maintenance free• Exceptional long life• Attractive appearance

The chemical and physical properties of zintek® make it very easy to machine and weld, and its resistance to atmospheric corrosion implies no maintenance and restoration costs, and enhances the design of buildings in various contexts.

TECHNICAL CHARACTERISTICS AND REFRENCE STANDARDS

Zintek® is a zinc-copper-titanium alloy of excellent quality levels that fully complies with the European EN 988 Standard “Zinc and Zinc Alloys – Specifi cations for rolled fl at products for building”.This standard defi nes the requirements for zinc-copper-titanium rolled fl at products used in buildings, supplied in coils, sheets or strips. According to the European EN 1170 Standard, the

alloy is produced with a zinc fi neness of 99.995, Zq quality, with the addition of the appropriate alloying elements.

Zintek® standard: UNI EN 988a) – composition in percentage values

Z1 quality zinc (see table UNI EN 1179)The alloy components improve the characteristics of the zinc rolled section:

• Titanium increases the resistance to permanent strain over time;• Copper increases the material tensile strength.

The combination of both reduces the expansion coeffi cient of the alloy.

Zintek® standard: UNI EN 988b) – mechanical properties

Cu

min

0,080

max

1,000

Ti

min

0,060

max

0,200

Al

min

max

0,015

Zn

remaining

0,2% Rp 0,2

Rm

A50mm

N/mm2

N/mm2

%

%

100

150

35

0,1

45

Unit load yield strength

Tensile strength

Ultimate percent elongation

Yield value percent elongation

Minimum hardness

min

min

min

max

HV

product catalogue 03

catalogo accessori 05

Physical and Technological Properties

Mass Specifi cations

Value

7,4

419

0,401

109

17

0,022

0,017

>300

80.000

7-9

Minimum 3

Minimum 5

40-55

Description

Density

Melting point

Specifi c heat at 20°C

Thermal conductivity at 20°C

Electrical conductivity at 20°C

Coeffi cient of thermal expansion lengthwise to lamination

Coeffi cient of thermal expansion transversal to lamination

Recrystallization limits

Modulus of elasticity

Erichsen drawing

Length tolerances at 180° 20°C

Width tolerances at 180° 20°C

Camber tolerances

Non-magnetic

Fireproof

Unit of measurement

Kg/dm3

°C

kJ/kg°C

W/m°K

m/ohm mm2

mm/m°C

mm/m°C

°C

N/mm2

mm

n°

n°

%

Nominal thickness mm

0,60

0,65

0,70

0,80

1,00

1,20

1,50

Approximate mass kg/m2

4,3

4,7

5,0

5,8

7,2

8,6

10,8

product catalogue 04

NATURAL coils

Item n.ZKNSC180601100

ZKNSC180651100

ZKNSC180700200ZKNSC180700250ZKNSC180700280ZKNSC180700310ZKNSC180700330ZKNSC180760333ZKNSC180760367ZKNSC180700400ZKNSC180670500ZKNSC180700550ZKNSC180700600ZKNSC180700670ZKNSC180700800ZKNSC180701000ZKNSC180701100

ZKNSC180800200ZKNSC180800250ZKNSC180800280ZKNSC180800330ZKNSC180860333ZKNSC180860367ZKNSC180800400ZKNSC180800500ZKNSC180800550ZKNSC180700600ZKNSC180800670ZKNSC180800800ZKNSC180801000ZKNSC180801100

ZKNSC181000200ZKNSC181000250ZKNSC181000280ZKNSC181000330ZKNSC181000333ZKNSC181000367ZKNSC181000400ZKNSC181000500ZKNSC181000550ZKNSC181000600ZKNSC181000670ZKNSC181000800ZKNSC181001000ZKNSC181001100

ZKNSC181201100

ZKNSC181501100

Length in mm1100

1100

200250280310330333367400500550600670800

10001100

200250280330333367400500550600670800

10001100

200250280330333367400500550600670800

10001100

1100

1100

Thickness in mm0,60

0,65

0,700,700,700,700,700,700,700,700,700,700,700,700,700,700,70

0,800,800,800,800,800,800,800,800,800,800,800,800,800,80

1,001,001,001,001,001,001,001,001,001,001,001,001,001,00

1,20

1,5

LENGTHS: Different lengths available on request. PROTECTIVE FILM: On request

PRE-PATINATED coils

Item n.ZKNPRSC280601100

ZKNPRSC280651100

ZKNPRSC280700200ZKNPRSC280700250ZKNPRSC280700280ZKNPRSC280700310ZKNPRSC280700330ZKNPRSC280760333ZKNPRSC280760367ZKNPRSC280700400ZKNPRSC280670500ZKNPRSC280700550ZKNPRSC280700600ZKNPRSC280700670ZKNPRSC280700800ZKNPRSC280701000ZKNPRSC280701100

ZKNPRSC280800200ZKNPRSC280800250ZKNPRSC280800280ZKNPRSC280800330ZKNPRSC280860333ZKNPRSC280860367ZKNPRSC280800400ZKNPRSC280800500ZKNPRSC280800550ZKNPRSC280700600ZKNPRSC280800670ZKNPRSC280800800ZKNPRSC280801000ZKNPRSC280801100

ZKNPRSC281000200ZKNPRSC281000250ZKNPRSC281000280ZKNPRSC281000330ZKNPRSC281000333ZKNPRSC281000367ZKNPRSC281000400ZKNPRSC281000500ZKNPRSC281000550ZKNPRSC281000600ZKNPRSC281000670ZKNPRSC281000800ZKNPRSC281001000ZKNPRSC281001100

ZKNPRSC281201100

ZKNPRSC281501100

Length in mm1100

1100

200250280310330333367400500550600670800

10001100

200250280330333367400500550600670800

10001100

200250280330333367400500550600670800

10001100

1100

1100

Thickness in mm0,60

0,65

0,700,700,700,700,700,700,700,700,700,700,700,700,700,700,70

0,800,800,800,800,800,800,800,800,800,800,800,800,800,80

1,001,001,001,001,001,001,001,001,001,001,001,001,001,00

1,20

1,5

product catalogue 05

product catalogue 06

NATURAL plates

Item n.ZKLSC1606010002000ZKLSC1606010002250ZKLSC1606010003000ZKLSC1606510002000ZKLSC1606510002250ZKLSC1606510003000ZKLSC1607010002000ZKLSC1607010002250ZKLSC1607010003000ZKLSC1608010002000ZKLSC1608010002250ZKLSC1608010003000ZKLSC1610010002000ZKLSC1610010002250ZKLSC1610010003000ZKLSC1612010002000ZKLSC1612010002250ZKLSC1612010003000ZKLSC1615010002000ZKLSC1615010002250ZKLSC1615010003000

ZKLSC1606011002000ZKLSC1606011002250ZKLSC1606011003000ZKLSC1606511002000ZKLSC1606511002250ZKLSC1606511003000ZKLSC1607011002000ZKLSC1607011002250ZKLSC1607011003000ZKLSC1608011002000ZKLSC1608011002250ZKLSC1608011003000ZKLSC1610011002000ZKLSC1610011002250ZKLSC1610011003000ZKLSC1612011002000ZKLSC1612011002250ZKLSC1612011003000ZKLSC1615011002000ZKLSC1615011002250ZKLSC1615011003000

Width in mm100010001000100010001000100010001000100010001000100010001000100010001000100010001000

110011001100110011001100110011001100110011001100110011001100110011001100110011001100

Length in mm200022503000200022503000200022503000200022503000200022503000200022503000200022503000

200022503000200022503000200022503000200022503000200022503000200022503000200022503000

Thickness in mm0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50

0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50

Weight/pallet in kg (~)100010001000100010001000100010001000100010001000100010001000100010001000100010001000

100010001000100010001000100010001000100010001000100010001000100010001000100010001000

product catalogue 07

PRE-PATINATED plates

Item n.ZKLPRSC2606010002000ZKLPRSC2606010002250ZKLPRSC2606010003000ZKLPRSC2606510002000ZKLPRSC2606510002250ZKLPRSC2606510003000ZKLPRSC2607010002000ZKLPRSC2607010002250ZKLPRSC2607010003000ZKLPRSC2608010002000ZKLPRSC2608010002250ZKLPRSC2608010003000ZKLPRSC2610010002000ZKLPRSC2610010002250ZKLPRSC2610010003000ZKLPRSC2612010002000ZKLPRSC2612010002250ZKLPRSC2612010003000ZKLPRSC2615010002000ZKLPRSC2615010002250ZKLPRSC2615010003000

ZKLPRSC2606011002000ZKLPRSC2606011002250ZKLPRSC2606011003000ZKLPRSC2606511002000ZKLPRSC2606511002250ZKLPRSC2606511003000ZKLPRSC2607011002000ZKLPRSC2607011002250ZKLPRSC2607011003000ZKLPRSC2608011002000ZKLPRSC2608011002250ZKLPRSC2608011003000ZKLPRSC2610011002000ZKLPRSC2610011002250ZKLPRSC2610011003000ZKLPRSC2612011002000ZKLPRSC2612011002250ZKLPRSC2612011003000ZKLPRSC2615011002000ZKLPRSC2615011002250ZKLPRSC2615011003000

Width in mm100010001000100010001000100010001000100010001000100010001000100010001000100010001000

110011001100110011001100110011001100110011001100110011001100110011001100110011001100

Length in mm200022503000200022503000200022503000200022503000200022503000200022503000200022503000

200022503000200022503000200022503000200022503000200022503000200022503000200022503000

Thickness in mm0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50

0,600,600,600,650,650,650,700,700,700,800,800,801,001,001,001,201,201,201,501,501,50

Weight/pallet in kg (~)100010001000100010001000100010001000100010001000100010001000100010001000100010001000

100010001000100010001000100010001000100010001000100010001000100010001000100010001000

Natural URBAN

Item n.

ZKNSCLSTURB101000ZKNSCLSTURB121000ZKNSCLSTURB151000ZKNSCLSTURB101100ZKNSCLSTURB121100ZKNSCLSTURB151100

Meshmm

R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5

Thickness in mm

11,21,51

1,21,5

Empty/Full

15%15%15%15%15%15%

Maxempty (~)

45%45%45%45%45%45%

Elongation (~)15%15%15%15%15%15%

Sheet widthin mm100010001000110011001100

Pre-patinated URBAN

Item n.

ZKNPRSCLSTURB101000ZKNPRSCLSTURB121000ZKNPRSCLSTURB151000ZKNPRSCLSTURB101100ZKNPRSCLSTURB121100ZKNPRSCLSTURB151100

Meshmm

R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5R100x30 - 13x1,0R100x30 - 13x1,2R100x30 - 13x1,5

Thickness in mm

11,21,51

1,21,5

Empty/fullfront panel (~)

15%15%15%15%15%15%

Maxempty (~)

45%45%45%45%45%45%

Elongation (~)15%15%15%15%15%15%

Sheet width in mm100010001000110011001100

Natural EXA 16

Item n.

ZKNSCLSTEXA101000ZKNSCLSTEXA121000ZKNSCLSTEXA151000ZKNSCLSTEXA101100ZKNSCLSTEXA121100ZKNSCLSTEXA151100

Meshmm

E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5

Thickness in mm

11,21,51

1,21,5

Empty/fullfront panel (~)

15%15%15%15%15%15%

Maxempty (~)

36%36%36%36%36%36%

Elongation (~)15%15%15%15%15%15%

Sheet width in mm100010001000110011001100

Pre-patinated EXA 16

Itemn.

ZKNPRSCLSTEXA101000ZKNPRSCLSTEXA121000ZKNPRSCLSTEXA151000ZKNPRSCLSTEXA101100ZKNPRSCLSTEXA121100ZKNPRSCLSTEXA151100

Meshmm

E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5E80x30 - 13x1,0E80x30 - 13x1,2E80x30 - 13x1,5

Thickness in mm

11,21,51

1,21,5

Empty/fullfront panel (~)

15%15%15%15%15%15%

Maxempty (~)

36%36%36%36%36%36%

Elongation (~)15%15%15%15%15%15%

Sheet width in mm100010001000110011001100

catalogo accessori 09product catalogue 08

FLATTENED plates

product catalogue 09

SURFACE APPEARANCE

The natural appearance of zintek® is a rolling-produced uniform shiny grey colour. Atmospheric agents cause the surface to oxidise creating a protective layer which remains stable over time, and gives a natural ageing effect to the surface with an attractive slate grey colour. The oxidation process may cause an even colouring of the surface, with different shades of grey, however it is only a transitory condition that fi nally evens out with an attractive uniform colour over the entire surface.

The natural look can be adjusted through specifi c surface treatments, without changing the natural resistance to corrosion.

REACTIVITY TO ATMOSPHERIC AGENTS AND CORROSION RESISTANCE

The protective layer that is formed when zinc is exposed to oxygen and water creates a layer of basic zinc carbonate that protects the metal. This is a natural protection process for zinc giving long-lasting strength

Durability

REACTIVITY TO TEMPERATURE VARIATIONSThe rolled section is not affected by any temperature changes that occur after processing and laying. It has a melting point of approximately 419 ° C and its recrystallizatio limit, which is very important for the soldering process, is 300°C.Fireproof and resistant to UV rays, the material is not affected by wind erosion.

BEHAVIOUR WITH CHEMICAL ACTIONSAvoid contact with any acid or alkaline substances.

BEHAVIOUR WITH ELECTROCHEMICAL ACTIONSWhen different metals come into contact with each other, they can damage each other due to the different potential. Therefore zintek® must not come into contact with copper and its alloys (brass), neither directly or indirectly, for example due to rainwater running over the surface from the roof or copper elements on to the zintek® rolled sections.

ECOLOGY AND THE ENVIRONMENTIt has been proved that any zinc deposits carried down by rainwater do not constitute any form of environmental risk.

RECYCLINGThe zinc that is applied to the roof or other building surfaces is 100% recyclable should it need replacing, and can be used in various production fi elds and has a high market value even as scrap.

WORKABILITYGiven its physical-chemical properties, zintek® is extremely ductile and malleable, making it ideal for any metal plate working. The rolled section must not be processed at temperatures below 10°C. It is good practice to begin work after having brought the temperature of the rolled section to this minimum value.As far as winter work is concerned, it is advisable to comply with best practice, i.e. prefabrication in the workshop, where the thermal conditions are better.

Environment

Rural

Urban industrial

Industrial agglomeration

Marine

Durability

Over 100 years

60 years

40 years

40 to 60 years

catalogo accessori 09product catalogue 10

For any work that has to be carried out on site, the rolled sections can be preheated by means of hot air fans.

Temperature variations have no infl uence on the rolled sections after the processing and laying phases, and therefore have no affect on the behaviour of the building

WELDABILITYIt offers excellent weldability with both traditional methods, using a lead-tin soldering alloy, and using recent TIG or induction welding methods.

If a mechanical join needs making in the zintek® rolled section, using screws or nails, then only aluminium, galvanised steel or stainless steel should be used. Copper and its alloys, such as brass, should not be used due to the electrochemical corrosion they could trigger.

MAINTENANCEUnlike other materials it requires no maintenance.

catalogo accessori 09product catalogue 11

50 cm to 80 cm

Leaf guards

Eaves flashing

Suspension brackets

Elbows

Intermediate sections

Branch pipe fittings

Pipe collars

Collar spacers

Guttering

Terminal with elbow

2 m to

3 m

Gutter bracket

Zintek® accessories: assembly

catalogo accessori 09product catalogue 12

catalogo accessori 09product catalogue 13

Natural zintek® accessories

English

Natural zinc titanium entry 280/80

Natural zinc titanium entry 333/100

Natural zinc titanium entry 333/120

Natural zinc titanium entry 400/120

Square zinc titanium entry 333/100

Square zinc titanium entry 400/120

Code

106280080

106330100

106330120

106400120

106500132

106500133

Natural zinc titanium angle 280 est.

Natural zinc titanium angle 333 est.

Natural zinc titanium angle 400 est.

Natural zinc titanium angle 280 int.

Natural zinc titanium angle 333 int.

Natural zinc titanium angle 400 int.

10E128000

10E133000

10E140000

10I128000

10I133000

10I140000

German type, left natural zinc titanium headline 280

German type, right natural zinc titanium headline 280

German type, left natural zinc titanium headline 333

German type, right natural zinc titanium headline 333

German type, left/right natural zinc titanium headline 280

German type, left/right natural zinc titanium headline 330

German type, left/right natural zinc titanium headline 400

Natural zinc titanium round headline 280

Natural zinc titanium round headline 333

Natural zinc titanium round headline 400

105328002

105328001

105333002

105333001

105328000

105333000

105340000

105628000

105633000

105640000

Natural zinc titanium welding elbow 80 mm 40°

Natural zinc titanium welding elbow 100 mm 40°

Natural zinc titanium welding elbow 120 mm 40°

Natural zinc titanium welding elbow 80 mm 72°

Natural zinc titanium welding elbow 100 mm 72°

Natural zinc titanium welding elbow 120 mm 72°

Natural zinc titanium welding elbow 80 mm 85°

Natural zinc titanium welding elbow 100 mm 85°

Natural zinc titanium shift 80 mm

Natural zinc titanium shift 100 mm

Natural zinc titanium shift 120 mm

104001080

104001100

104001120

104002080

104002100

104002120

104003080

104003100

104004080

104004100

104004120

Natural zinc titanium 80 mm transfer pipe with leaf guard

Natural zinc titanium 100 mm transfer pipe with leaf guard

Natural zinc titanium 120 mm transfer pipe with leaf guard

108007080

108007100

108007120

Zinc 80 mm collars + 8x80 stainless steel pin and plug

Zinc 100 mm collars + 8x80 stainless steel pin and plug

Zinc 120 mm collars + 8x80 stainless steel pin and plug

105003080

105003100

105003120

Natural zinc titanium 80/115 rose

Natural zinc titanium 100/115 rose

106009080

106009100

Photo

catalogo accessori 09product catalogue 14

Natural zintek® accessories

English

Natural zinc titanium 260 expansion joint, 3 m

Natural zinc titanium 390 expansion joint, 6 m

Natural zinc titanium 280 expansion joint

Natural zinc titanium 330 expansion joint

Natural zinc titanium 400 expansion joint

Code

105020000

105021000

105028000

105033000

105040000

Photo

Natural zinc titanium gutter 280x0.7 EN 612

Natural zinc titanium gutter 333x0.7 EN 612

Natural zinc titanium gutter 400x0.7 EN 612

Natural zinc titanium square gutter 280x0.7 EN 612

Natural zinc titanium square gutter 330x0.7 EN 612

Natural zinc titanium square gutter 400x0.7 EN 612

100128070

100133070

100140070

102128070

102133070

102140070

Natural zinc titanium pipe 80x0.65 3 m

Natural zinc titanium pipe 80x0.65 4 m

Natural zinc titanium pipe 100x0.65 3 m

Natural zinc titanium pipe 100x0.65 4 m

Natural zinc titanium pipe 120x0.65 3 m

Natural zinc titanium pipe 120x0.65 4 m

103080045

103080055

103100045

103100055

103120045

103120055

Natural zinc titanium covered Zn supports 280/25/6K

Natural zinc titanium covered Zn supports 280/25/6L

Natural zinc titanium covered Zn supports 330/25/6K

Natural zinc titanium covered Zn supports 330/25/6L

Natural zinc titanium covered Zn supports 400/25/6L

Natural zinc titanium covered Zn square supports 333/25/6L

Natural zinc titanium covered Zn square supports 400/25/6L

107001164

107001165

107001166

107001167

107001168

107001169

107001170

German type natural zinc titanium pipe unions, 80 (200x200x470)

German type natural zinc titanium pipe unions, 100 (200x200x470)

106700080

106700100

Natural zinc titanium duck leg 80

Natural zinc titanium duck leg 100

Natural zinc titanium duck leg 120

108005080

108005100

108005120

Natural zinc titanium central funnel 80

Natural zinc titanium side funnel 80

Natural zinc titanium central funnel 100

Natural zinc titanium side funnel 100

Natural zinc titanium central funnel 120

Natural zinc titanium side funnel 12 0

108000080

108001080

108000100

108001100

108000120

108001120

Natural zinc titanium drilled net 165x0.7 mm

Natural zinc titanium drilled net 200x0.7 mm

Natural zinc titanium drilled net 250x0.7 mm

Natural zinc titanium drilled net 333x0.7 mm

Natural zinc titanium drilled net 1000x0.7 mm

Natural zinc titanium fl attened net 1100x0.8 RB 15

Natural zinc titanium fl attened net 1100x1.0 RB 15

100165070

100200070

100250070

100333070

100100070

1001100080RB15

1001100100RB15

catalogo accessori 09product catalogue 15

Pre-patinated zintek® accessories

English

Pre-patinated zinc titanium entry 280/80

Pre-patinated zinc titanium entry 333/100

Pre-patinated zinc titanium entry 333/120

Pre-patinated zinc titanium entry 400/120

Pre-patinated zinc titanium square entry 333/100

Pre-patinated zinc titanium square entry 400/120

Code

106280080P

106330100P

106330120P

106400120P

106500132P

106500133P

Pre-patinated zinc-titanium external angle 280

Pre-patinated zinc-titanium external angle 333

Pre-patinated zinc-titanium external angle 400

Pre-patinated zinc-titanium internal angle 280

Pre-patinated zinc-titanium internal angle 333

Pre-patinated zinc-titanium internal angle 400

10E128000P

10E133000P

10E140000P

10I128000P

10I133000P

10I140000P

German type, left 280 pre-patinated zinc-titanium headline

German type, right 280 pre-patinated zinc-titanium headline

German type, left 333 pre-patinated zinc-titanium headline

German type, right 333 pre-patinated zinc-titanium headline

German type, left/right 280 pre-patinated zinc-titanium headline

German type, left/right 330 pre-patinated zinc-titanium headline

German type, left/right 400 pre-patinated zinc-titanium headline

Round 280 pre-patinated zinc-titanium headline

Round 333 pre-patinated zinc-titanium headline

Round 400 pre-patinated zinc-titanium headline

105328002P

105328001P

105333002P

105333001P

105328000P

105333000P

105340000P

105628000P

105633000P

105640000P

Prepatinated zinc titanium weld elbow 80 mm 40°

Prepatinated zinc titanium weld elbow 100 mm 40°

Prepatinated zinc titanium weld elbow 120 mm 40°

Prepatinated zinc titanium weld elbow 80 mm 72°

Prepatinated zinc titanium weld elbow 100 mm 72°

Prepatinated zinc titanium weld elbow 120 mm 72°

Prepatinated zinc titanium weld elbow 80 mm 85°

Prepatinated zinc titanium weld elbow 100 mm 85°

Pre-patinated zinc titanium shift 80

Pre-patinated zinc titanium shift 100

Pre-patinated zinc titanium shift 120

104001080P

104001100P

104001120P

104002080P

104002100P

104002120P

104003080P

104003100P

104004080P

104004100P

104004120P

Pre-patinated zinc titanium transfer pipe 80 mm with leaf guard

Pre-patinated zinc titanium transfer pipe 100 mm with leaf guard

Pre-patinated zinc titanium transfer pipe 120 mm with leaf guard

108007080P

108007100P

108007120P

Pre-patinated zinc 80 mm collars + 8x80 stainless steel pin and plug

Pre-patinated zinc 100 mm collars + 8x80 stainless steel pin and plug

Pre-patinated zinc 120 mm collars + 8x80 stainless steel pin and plug

105003080P

105003100P

105003120P

Pre-patinated zinc titanium 80/115 rose

Pre-patinated zinc titanium 100/115 rose

106009080P

106009100P

Photo

catalogo accessori 09product catalogue 16

Accessori in zintek® prepatinato

English

Pre-patinated zinc titanium 260 expansion joint, 3 m

Pre-patinated zinc titanium 390 expansion joint, 6 m

Pre-patinated zinc titanium 280 expansion joint

Pre-patinated zinc titanium 330 expansion joint

Pre-patinated zinc titanium 400 expansion joint

Code

105020000P

105021000P

105028000P

105033000P

105040000P

Photo

Pre-patinated zinc titanium gutter 280x0.7 EN 612

Pre-patinated zinc titanium gutter 333x0.7 EN 612

Pre-patinated zinc titanium gutter 400x0.7 EN 612

Pre-patinated zinc titanium square gutter 280x0.7 EN 612

Pre-patinated zinc titanium square gutter 333x0.7 EN 612

Pre-patinated zinc titanium square gutter 400x0.7 EN 612

100128070P

100133070P

100140070P

102128070P

102133070P

102140070P

Pre-patinated zinc titanium pipe 80x0.65 3 m

Pre-patinated zinc titanium pipe 80x0.65 4 m

Pre-patinated zinc titanium pipe 100x0.65 3 m

Pre-patinated zinc titanium pipe 100x0.65 4 m

Pre-patinated zinc titanium pipe 120x0.65 3 m

Pre-patinated zinc titanium pipe 120x0.65 4 m

103080045P

103080055P

103100045P

103100055P

103120045P

103120055P

Pre-patinated zinc titanium covered Zn supports 280/25/6K

Pre-patinated zinc titanium covered Zn supports 280/25/6L

Pre-patinated zinc titanium covered Zn supports 333/25/6K

Pre-patinated zinc titanium covered Zn supports 333/25/6L

Pre-patinated zinc titanium covered Zn supports 400/25/6L

Pre-patinated zinc titanium covered Zn square supports 333/25/6L

Pre-patinated zinc titanium covered Zn square supports 400/25/6L

107001164P

107001165P

107001166P

107001167P

107001168P

107001169P

107001170P

German type pre-patinated zinc titanium pipe unions, 80 (200x200x470)

German type pre-patinated zinc titanium pipe unions, 100 (200x200x470)

106700080P

106700100P

Pre-patinated zinc titanium duck leg 80

Pre-patinated zinc titanium duck leg 100

Pre-patinated zinc titanium duck leg 120

108005080P

108005100P

108005120P

Pre-patinated zinc titanium central funnel 80

Pre-patinated zinc titanium side funnel 80

Pre-patinated zinc titanium central funnel 100

Pre-patinated zinc titanium side funnel 100

Pre-patinated zinc titanium central funnel 120

Pre-patinated zinc titanium side funnel 120

108000080P

108001080P

108000100P

108001100P

108000120P

108001120P

Pre-patinated zinc titanium drilled net 165x0.7 mm

Pre-patinated zinc titanium drilled net 200x0.7 mm

Pre-patinated zinc titanium drilled net 250x0.7 mm

Pre-patinated zinc titanium drilled net 333x0.7 mm

Pre-patinated zinc titanium drilled net 1000x0.7 mm

Pre-patinated zinc titanium fl attened net 1100x0.8 RB 15

Pre-patinated zinc titanium fl attened net 1100x1.0 RB 15

100165070P

100200070P

100250070P

100333070P

100100070P

1001100080RB15P

1001100100RB15P

product catalogue 17

zintek@zintek.it | www.zintek.it

Zintek Srl Via delle Industrie 22 - 30175 Porto Marghera - Veneziatel +39 041 2901866 - fax +39 041 2901834