• Standard fixed end range. • Suitable for permanent sealing of wells and bore holes. • Used prior to well abandonment in conjunction with grouting procedures. IBP270FE600 RILL ROD L EFT HAND BACK OFF SUB IFTING PAD EYES PACKER INFLATION ASY P ACKER ELEMEN NON INFLATED 6 CC w a_ Bridge Plug Inflatable Packers INFLATABLE BRIDGE PLUGS STANDARD BRIDGE PLUG 0 13-3/8" • Designed with two valves to prevent over-inflation and prevent deflation. • Sliding end range suitable for sma run-in diameters. • Suitable for cased and open hole. ok, • Lifting lugs top and bottom allow fast and effective handling. INFLATED AND SET • Large range of Bridge Plugs to suit standard casing sizes • Non-standard sizes upon request. STANDARD CASING SIZE ID OD OF PACKER EFFECTIVE LENGTH INFLATION VOLUME GAL PERCENTAGE INFLATION DIA DIFFERENTIAL PRESSURE CAPACITY SUPPORTED PSI UNSUPPORTED PSI 12.715 - 10.625" 24" 5.8 19.6/ 950 300 TABLE PACKER PERFORMANCE GUDE ONLY ALL SIZES AND PRESSURES AVAILABLE ON REQUEST Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler St Belmont 6104, Perth Western Australia Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770 [email protected] www.ripe-packers.com Supplier and manufacturers of well screen PVC rubber k-packers, well packer tri-seals, equipment and services.

13 3 8 Bridge Plug Imperial

Download PDF Report

Upload
kim-misson
View
25
Download
0

Tags:

Embed Size (px)

DESCRIPTION

RIPE supply standard and custom built inflatable packers.RIPE manufacture well testing packers.RIPE inflatable pressure grouting packers for wide variety of applications.RIPE cementation well casing grouting packer systems.RIPE drilling and boring inflatable packers equipment services and repairs.RIPE water bore rehabilitation and well casing repair packer systems.RIPE rubber K-packers to suit well screens, risers and telescopic seals.RIPE fishing tools down-hole inflatable grab packer equipment and services.RIPE Hydraulic proppant injection fracturing, well stimulation packers.RIPE repair or replace inflatable packers from OEM manufacturers. RIPE Inflatable packers for oilfield and non-oilfield multi-set packer systems.RIPE test all inflatable packers and equipment with NATA certified equipment.Service of standard and custom inflatable packer replacements and spares.RIPE all products are available sale or hire.

Citation preview

• Standard fixed end range.

• Suitable for permanent sealing of wells and bore holes.

• Used prior to well abandonment in conjunction with grouting procedures.

IBP270FE600

RILL ROD

LEFT HAND BACK OFF SUB

IFTING PAD EYES

PACKER INFLATION ASY

PACKER ELEMEN

NON INFLATED

CC w

Bridge Plug Inflatable Packers

INFLATABLE BRIDGE PLUGS STANDARD BRIDGE PLUG 0 13-3/8"

• Designed with two valves to prevent over-inflation and prevent deflation.

• Sliding end range suitable for sma run-in diameters.

• Suitable for cased and open hole. ok,

• Lifting lugs top and bottom allow fast and effective handling.

INFLATED AND SET

• Large range of Bridge Plugs to suit standard casing sizes • Non-standard sizes upon request.

STANDARD CASING SIZE

OD OF PACKER

EFFECTIVE LENGTH

INFLATION VOLUME GAL

PERCENTAGE INFLATION DIA

DIFFERENTIAL PRESSURE CAPACITY

SUPPORTED PSI

UNSUPPORTED PSI

12.715- 10.625" 24" 5.8 19.6/ 950 300 TABLE PACKER PERFORMANCE GUDE ONLY

ALL SIZES AND PRESSURES AVAILABLE ON REQUEST

Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler St Belmont 6104, Perth Western Australia

Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770 [email protected] www.ripe-packers.com Supplier and manufacturers of well screen PVC rubber k-packers, well packer tri-seals, equipment and services.