12
Stand-On Self-Propelled Spreader ILLUSTRATED PARTS LIST 125 lb 5:1 Gearbox Model #: 709157 Starting Date: 01/2004

125 lb Stand-On Self-Propelled Spreader

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Stand-OnSelf-PropelledSpreader

ILLUSTRATED PARTS LIST

125 lb

5:1 Gearbox

Model #: 709157

Starting Date: 01/2004

This Page Left Intentionally Blank

2

TABLE OF CONTENTS

Sulky Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Hopper Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Impeller Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Front Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Remote Deflector Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 8Shut-Off Plate Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Control Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Transmission Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Warranty

3

Sulky Assembly - Figure 1 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 006246 Key, 3/16" x 1" 1 16 708763 Hex Cap Screw, 1/4-20 x .75 22 012152 Nut, 1/4-20 2 17 708764 Hex Cap Screw, 5/16-18 x .75 13 012165 Nut, 5/16-18 1 18 708903 Transmission Skid Plate 14 020508 Carriage Bolt, 5/16-18 x .75 2 19 708884 Cable Mounting Bracket 25 060078 Grease Fitting, 1/4-28 x 3/16 1 20 709139 Clevis Pin Pivot Weldment 16 700629 Self Tapping Screw, 1/4-20 x .75 2 21 709168 Idler Arm 17 700635 Nut, 5/16-18, Hex Flange Lock 12 22 709243 Self Tapping Screw, 3/8-16 x .875 48 700678 Jam Nut, 1.0-14 1 23 709260 Flange Bushing 29 701161 Self Tapping Screw, 5/16-18 x .625 2 24 709302 V-Belt, A-Section 1

10 701864 Self Tapping Screw, 10-24 x .50 3 25 709314 Cast Pulley 111 702601 Hex Cap Screw, 3/8-16 x .75 1 26 709366 Rubber Grommet 412 707934 Fottstand Weldment 1 27 709452 Engine PLate 113 707972 Engine, Kawasaki 1 28 709457 U-Bolt 214 707977 Torsion Bar 1 29 709464 Rubber Engine Mounting 315 708016 Fan Guard 1

13

1

25

24

7

27

22

29

7

2023

8265

21

26

9

19

14

2

3

17

19

30

7

18

7

428 1561110 1216

GD: 01007936-T04

4

Hopper Assembly - Figure 2 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 005530 Washer, 3/8 1 12 060050 Spring Retainer Clip 12 018628 Washer, 1/4 2 13 060057 Machine Screw, 1/4-20 x 7/8 13 030322 Cam Agitator Assembly 1 14 704959 80# Hopper 14 031167 Hex Cap Screw, 1/4-20 x 1.50 4 15 705631 Screw, #8 x 3/8, SS 25 060027 Agitator Bearing 1 16 706695 Screen, SS 16 060033 Washer, 1/4, SS 4 17 706772 Rate Plate 17 060036 Nut, 1/4-20, SS 5 18 709729 Hopper Extension 18 060043 Rate Control Knob 1 19 035678 Machine Screw, 10-24 x 3/4, SS 49 060044 Rate Control Arm 1 20 070027 Nut, 10-24, SS 4

10 060046 Screen Clip, SS 2 21 705630 Washer, #8, SS 411 060049 Agitator Arm Assembly 1

10

6

12

1

11

9

17

15

2

8

15

7653

16

4

10

6

13

14

7

19

18

20

21

GD: 01009332-T05

5

Impeller Assembly - Figure 3 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 030317 Impeller 1 8 030595 Gearset Cap 12 030382 Impeller Shaft 1 9 030594 Bevel Gearset Gear 13 030384 Oil Gearset Seal 1 10 030595 Pinion Gearbox Gear 14 030385 V Gearset Seal 2 11 060022 Roll Pin, 1/8 x 5/8 15 030415 Tap Screw 3 12 060069 Roll Pin, 1/8 x 7/8, SS 16 030591 Gearset Housing 1 13 700129 Screw, 8-18, #6 x 5/8 67 030592 Gearset Cover 1

697134

4

1

12

2

3

5

8

10

11

GD: 01009343-T00

6

Front Frame Assembly - Figure 4 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 709896 Bushing 2 12 709165 Hex Cap SCrew, 3/4-16 x 5.50 12 014133 Hex Cap Screw, 5/16-18 x 3/4 8 13 709167 Idler Wheel Assembly, 13 x 6.5-6 13 709897 Washer, .06 x .776 x 1.125, SS 3 14 709255 Jam Nut, 3/4-16 14 060019 Roll Pin, 5/32 x 1-1/4, SS 1 15 709256 Shut-Off Cable bracket 15 060078 Grease Fitting, 1/4-28 x 3/16 1 16 709257 Deflector Cable bracket 16 700523 Nut, #10-24 2 17 709304 Shield, SS 17 700629 Self Tapping Screw, 1/4-20 x .75 7 18 709327 Pivot Bracket Weldment 18 707833 Front Axle 1 19 709341 Front Frame bearing Assembly 19 709155 Handle Weldment 1 20 709499 Shaft Collar 1

10 708764 Hex Cap Screw, 5/16-18 x .75 6 21 709831 Screw, 10-24 x 1.25 211 709141 Drive Wheel Assmebly, 13 x 6.5-6 1 22 060073 Lock Washer, 5/16, SS 8

8

4

3

11

21

6

2

3132

19

10

362021

1675114 18

17

7

15

7

12

9

10

22

GD: 01009348-T04

7

Remote Deflector Assembly - Figure 5 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 018628 Washer, 1/4 4 8 060057 Machine Screw, 1/4-20 x 7/8 32 030503 Deflector Arm Spacer 1 9 060059 Nut, 1/4-20 23 031168 Hex Cap Screw, 1/4-20 x .75, SS 2 10 061052 Cotter Pin, 1/8 x 1, SS 14 035030 Offset Deflector Bracket 1 11 061053 Washer, 3/8, SS 15 060029 Machine Screw, 1/4-20 x 2 1 12 061066 Deflector Tube 16 060033 Washer, 1/4, SS 1 13 706253 Deflector Mount Lever 17 060036 Nut, 1/4, SS 6 14 706254 Deflector Mount Weldment 1

7

13

7

1

7

4

7

10

8

9

9

8

1

7

11

8

14

5

2

6

3

GD: 01009351-T01

8

Shut-Off Plate Assembly - Figure 6 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 017288 Pivot Lever ASsembly 1 10 704186 Spring Clip 12 020492 Slide Lever 1 11 704539 Pivot Assmebly Mounting Plate 13 020511 Remote Third Hole Wire Bracket 1 12 704955 Shut-Off Plate Clip 34 060032 Cotter Pin, 3/32 x 1" 1 13 704956 Shut-Off Plate Spring 15 060033 Washer, 1/4, SS 1 14 705630 Washer, #8, SS 16 060036 Nut, 1/4-20, SS 2 15 705631 Screw, #8 x 3/8, SS 37 060056 Nut, 8-32 2 16 705632 Screw, #8 x 5/8, SS 18 060061 Pivot Lever Rod 1 17 706825 Shut-Off Plate 19 060083 Lock Washer 2 18 709496 Hex Cap Screw, 8-32 x 1/2, SS 2

4

5

8

12

17

15

6

1

11

18

2

3

9

7

13

14

16

10GD: 01009368-T03

9

Control Assembly - Figure 7 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 006194 Nut, #10-24 2 16 709172 Throttle Control 12 011075 Washer, 5/16 1 17 709173 Forward Cable 13 012152 Nut, 1/4-20 2 18 709174 Reverse Cable 14 012165 Nut, 5/16-18 1 19 709251 On/Off Cable 15 012169 Washer, 5/16 4 20 709322 Shoulder Bolt, 1/4 x 1/4 36 016771 Washer, 3/16 2 21 709478 Speed Control Lever 17 060033 Washer, 1/4, SS 2 22 709333 Compression Spring 18 083192 Idler Washer 1 23 709358 Shoulder Bolt, 1/4 x 1.25 29 700600 Washer, 1/4 x .630 x .0515 2 24 709361 Shoulder Bolt, 5/16 x 1.50 2

10 709931 U-Nut, #10-16 6 25 709363 Hex Cap Screw, 10-24 x .50 611 701714 Grip 2 26 709365 Rubber Grommet 512 709153 Control Lever Weldment 4 27 709369 On/Off Lever Knob 413 709483 On/Off Lever Weldment 1 28 709377 Nut, 10-24, w/Star Washer 314 709169 3rd Hole Control 1 29 709459 Shoulder Bolt 3/8 x 1.50 115 709171 Remote Deflector Cable 1 30 709482 Speed Control Grip 1

23

21

30

7

6

1

5

9

3

5

3924121114

1322241610 8 29

27

13

19

20

27

25

2625

122428201726 11

15

27

10

28

2710

18

20

28

GD: 01009382-T03

10

Transmission Assembly - Figure 8 and Parts List

Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 011459 Washer, 1/2 1 15 707935 Transmission, Hydro Gear 12 012165 Nut, 5/16-18 1 16 708866 Wheel Assembly, 18 x 6.50-8 23 012169 Washer, 5/16 1 17 709149 Brake Lever 14 012173 Nut, 3/8-16 1 18 709148 Brake Lever Rod 15 012186 Nut, 1/4-20 6 19 709479 Transmission Lever Weldment 16 012187 Lug Nut, 1/2-20 8 20 709219 Pivot Brake Joint 17 021961 E-Ring 2 21 709246 Wheel Hub Assembly 28 023796 Washer, .781 ID x 2.00 OD x .105 2 22 709369 Transmission Lever Knob 19 700450 Jam Nut, 3/8-24 2 23 709458 Key, 3/16 x 3/16 x 2 2

10 700600 Washer, 1/4 x .630 x .0515 1 24 709475 Extension Spring 111 702766 Nut, 1/4-20 1 25 709480 Hex Cap Screw, 1/4-20 x 3.00 112 702771 Cotter Pin, .072 x 1.12 Long 2 26 709481 Hex Cap Screw, 1/4-20 x 2.50 113 703561 Nut, M8, Top Lock 1 27 709737 Shoulder Bolt, 5/16 x 1.00 114 704118 Shoulder Screw, 3/8-16, .50 x .27 LG 1 28 709829 Damper Assembly 1

76238 16211028 11

327

1317 1414

29 201812

19 52625

22

24

5

15

GD: 01009830-T01

11

Stand-On Self-Propelled Spreader One-Year Limited Warranty 1. What Is Covered By This Warranty. LESCO, Inc. warrants, to the original purchaser only, that the Equipment that is the subject of

this sale (a) conforms to LESCO’s published specifications, and (b) is free from defects under normal service, for a two-year periodfrom the original date of delivery. This warranty does not include damage to the Equipment resulting from occurrences set forthhereinafter in (2). If the purchaser discovers within this period a failure of the Equipment to conform to specifications or a defect inmaterial or workmanship, they must promptly notify LESCO in writing of such claim. Any claims under this warranty must bereceived in writing by LESCO within 25 months from the date of original delivery. Within a reasonable time after such notification,LESCO will replace any defective component of the Equipment or part thereof. LESCO will provide the components or parts atLESCO’s expense. Labor is to be performed by the original purchaser. (LESCO will provide purchaser a labor allowance atLESCO’s current flat rate schedule.) LESCO will make the final determination as to the amount of hours to be reimbursed to thepurchaser for labor. All defective parts shall be returned to LESCO if requested. These remedies are the original purchaser’sexclusive remedies for breach of warranty.

2. What Is Not Covered By This Warranty. LESCO does not warrant (a) any product, components or parts not manufactured byLESCO; (b) defects caused by failure to provide a suitable installation environment for the Equipment; (c) damage caused by use ofthe Equipment for purposes other than those for which it was designed; (d) damage caused by accident or disasters such as fire,flood, wind and lightning; (e) damage caused by unauthorized attachments or modification; or (f) any other abuse or misuse of theEquipment.

3. EXCLUSIVE WARRANTY. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES ORREMEDIES, WHETHER WRITTEN, ORAL OR IMPLIED. ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE, COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXPRESSLYDISCLAIMED AND EXCLUDED.

4. LIMITATION OF REMEDIES. UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT prohibited BY APPLICABLE LAW,SHALL LESCO BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, SPECIAL, INCIDENTAL ORCONSEQUENTIAL ARISING OUT OF THE USE OF OR INABILITY TO USE THIS EQUIPMENT INCLUDING BUT NOT LIMITEDTO ANY CLAIM FOR LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE EQUIPMENT OR ANYASSOCIATED EQUIPMENT, FACILITIES OR SERVICE, DOWNTIME, THE CLAIMS OR COSTS OF THIRD PARTIESINCLUDING CUSTOMERS, AND INJURY TO PROPERTY. Some states do not allow limitations on how long an implied warrantylasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply toyou. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

5. Time Limit For Claims. Any claim for breach of warranty or claims under this warranty must be received by LESCO within 25months following delivery of the equipment.

6. No Other Warranties. Unless modified in writing signed by both parties, this agreement is understood to be the complete andexclusive agreement between the parties, superceding all prior agreements, oral or written, and all other communications betweenthe parties relating to the subject matter of this agreement. No employee or representative of LESCO or any other party isauthorized to make any other Warranty or to assume any other liability in connection with the sale of its Equipment.

7. Future Changes. LESCO reserves the right to reserve, change or modify the construction and design of its Equipment or anycomponent part or parts thereof without incurring the obligations to make such changes or modifications in present equipment.

8. Allocation Of Risks. This agreement allocates the risks of equipment failure between LESCO and the original purchaser. Thisallocation is recognized by both parties and is reflected in the price of the goods. THE PURCHASER ACKNOWLEDGES THAT ITHAS READ THIS AGREEMENT, UNDERSTANDS IT, AND IS BOUND BY ITS TERMS.

9. How To Contact LESCO. If during the warranty period, the LESCO 36", 48", 52" & 54" Hydro Commercial Rotary Mower does notfunction properly due to defect, simply contact the LESCO Service Department:

LESCO, Inc. (440) 783-9250 ClevelandTechnical Service Department (800) 321-5325 Toll Free, Ext. 6200P.O. Box 368000Strongsville, OH 44136-9998

HOW TO ORDER PARTSContact your LESCO Salesperson, OR phone us (use the number below), OR write us. (use the address below.)We will need the following information: 1. Your account number if available. 2. Your name and address and the address where you want the parts to be shipped. 3. The Model/Serial No. of the equipment. 4. The LESCO Part No. and the quantity desired. (Please do not use reference numbers.)NOTE: Inspect all shipments on receipt for damage or missing parts. File a claim with the carrier before accepting a damaged shipment.

We reserve the right to change designs, specifications and equipment at any time without notice and without incurring any obligations.

LESCO, Inc., 15885 Sprague Road, Strongsville, Ohio 44136Toll Free (800) 321-5325 • In the Cleveland Area (440) 783-9250Form No. 709935 Rev. 03-0AA 12/15/2003 © Copyright 2003 - LESCO, Inc. LESCO is a registered trademark of LESCO Technologies, LLC.