1195 Drawings 01195-1001

C

B

A

2.13 (54.1)

1.625(41.28)

3.37 (86.6)

F

E

DI.D.

SOCKET WELD BODYOPTION CODE S1

I.D. NPT

NPT FEMALE BODYOPTION CODE T1

1195 SOCKET WELD OR THREADED BODY TYPE

DIMENSIONAL DRAWING FOR 1195INTEGRAL ORIFICE

DR. 08/25/04

K.Green 08/26/04

J.Rumsey

NONE

SIZE

SCALE:

A

TITLE

01195-1001SHEET

BOULDER, COLORADO

DRAWING NO.

1 OF 9

REVISIONS

AA

REV

NEW RELEASE

DESCRIPTION CHG.NO.

EC005156 RE

APP'D

08/27/04

DATE

APPROVAL

SPECIALS

TAGGING

DRAWING

*ALL DIMENSIONS ARE NOMINAL

AND ARE FOR REFERENCE ONLY

*UNLESS OTHERWISE SPECIFIED

DIMENSIONS IN INCHES (MM)

Electronic Master – PRINTED COPIES ARE UNCONTROLLED – Rosemount Proprietary

TYPE I®

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B 4.7-in (119.4mm) 5.2-in (132.1mm) 5.9-in (149.9mm)

C 3.0-in (76mm) 3.3-in (84mm) 3.7-in (94mm)

D 0.805-in (20.5mm) 1.280-in (32.5mm) 1.865-in (47.4mm)

E 3.6-in (91mm) 3.9-in (99mm) 4.4-in (112mm)

F 2.6-in (66mm) 3.0-in (76mm) 3.5-in (89mm)

I.D. 0.622-in (15.8mm) 1.049-in (26.6mm) 1.500-in (38.1mm)

NPT 1/2" NPT 1" NPT 1-1/2" NPT

TABLE 1 - BODY DIMENSIONS

DIMENSIONSLINE SIZE

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B 4.7-in (119.4mm) 5.2-in (132.1mm) 5.9-in (149.9mm)

C 3.0-in (76mm) 3.3-in (84mm) 3.7-in (94mm)

D 0.805-in (20.5mm) 1.280-in (32.5mm) 1.865-in (47.4mm)

E 3.6-in (91mm) 3.9-in (99mm) 4.4-in (112mm)

F 2.6-in (66mm) 3.0-in (76mm) 3.5-in (89mm)

I.D. 0.622-in (15.8mm) 1.049-in (26.6mm) 1.500-in (38.1mm)

NPT 1/2" NPT 1" NPT 1-1/2" NPT

TABLE 1 - BODY DIMENSIONS

DIMENSIONSLINE SIZE

F

H

BORE

E

ORIFICE PLATE

DETAIL

.162 (4.11)

SIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

2 9

01195-1001NONE

BOULDER, COLORADO


®

NOTES:

1. ROSEMOUNT INC. CERTIFIES THIS DRAWING IS IN ACCORDANCE WITH ROSEMOUNT ENGINEERING SPECIFICATIONS AND ACCURATELY REPRESENTS THE EQUIPMENT FURNISHED.

2. SENSOR ORIENTATION SHOWN FOR DETAIL ONLY. FOR ACTUAL RECOMMENDED LOCATION AND ORIENTATION REFER TO INSTALLATION INSTRUCTION MANUAL 00809-0100-4686.

3. FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DATA SHEET 00813-0100-4686.

4. 1195 MAXIMUM TEMPERATURE IS 450°F (232°C) DIRECT MOUNT ELECTRONICS, 850°F (454°C) FOR REMOTE MOUNT ELECTRONICS.

5. MATERIAL FOR 1195 IS 316/316LSS OR HASTELLOY C-276.

6. ORIFICE TYPE IS SQUARE EDGE – ORIFICE BORE SIZES 0.066 AND LARGER. FOR ORIFICES 0.010 TO 0.034 (1/2” LINE SIZE ONLY) ORIFICE TYPE IS QUADRANT EDGE.

7. 1195 RATED TO 600# ANSI / DIN PN100.

8. ½” NPT FLANGE ADAPTERS CAN BE ROTATED TO GIVE CONNECTIONS CENTERS OF 2.00-in (51mm), 2.13-in (54mm), OR 2.25-in (57mm).

9. FOR OPTIMUM PERFORMANCE, ORIENTATION AND FLOW DIRECTION IS AS FOLLOWS: GAS: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR DOWNWARD FLOW IN A VERTICAL LINE. REMOTE MOUNTING IS RECOMMENDED WITH UPWARD FLOW IN A VERTICAL LINE. LIQUID: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR UPWARD FLOW IN A VERTICAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL LINE. STEAM: REMOTE MOUNTING IS ACCEPTABLE WITH HORIZONTAL OR UPWARD FLOW IN A VERTICAL LINE. DIRECT MOUNTING IS RECOMMENDED ONLY IN A HORIZONTAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL LINE.

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

E 3.6-in (91mm) 3.9-in (99mm) 4.4-in (112mm)

F 2.6-in (66mm) 3.0-in (76mm) 3.5-in (89mm)

H 2.5-in (64mm) 3.0-in (76mm) 3.5-in (89mm)

TABLE 2 - ORIFICE PLATE

LINE SIZEDIMENSIONS

BORE 1/2-in. (12.7mm)

0010 0.010-in (0.25mm) for 1/2" PIPE

0014 0.014-in (0.36mm) for 1/2" PIPE

0020 0.020-in (0.51mm) for 1/2" PIPE

0034 0.034-in (0.86mm) for 1/2" PIPE

0066 0.066-in (1.68mm) for 1/2" PIPE

0109 0.109-in (2.77mm) for 1/2" PIPE

0106 0.160-in (4.06mm) for 1/2" PIPE

0196 0.196-in (4.98mm) for 1/2" PIPE

0260 0.260-in (6.60mm) for 1/2" PIPE

0340 0.340-in (8.64mm) for 1/2" PIPE

0150 0.150-in (3.81mm) for 1" PIPE

0250 0.250-in (6.35mm) for 1" PIPE

0345 0.345-in (8.76mm) for 1" PIPE

0500 0.500-in (12.70mm) for 1" PIPE

0630 0.630-in (16.00mm) for 1" PIPE

0800 0.800-in (20.32mm) for 1" PIPE

0295 0.295-in (7.49mm) for 1-1/2" PIPE

0376 0.376-in (9.55mm) for 1-1/2" PIPE

0512 0.512-in (13.00mm) for 1-1/2" PIPE

0748 0.748-in (19.00mm) for 1-1/2" PIPE

1022 1.022-in (25.96mm) for 1-1/2" PIPE

1184 1.184-in (30.07mm) for 1-1/2" PIPE


NOTES:

1. ROSEMOUNT INC. CERTIFIES THIS DRAWING IS IN ACCORDANCE WITH ROSEMOUNT ENGINEERING SPECIFICATIONS AND ACCURATELY REPRESENTS THE EQUIPMENT FURNISHED.

2. SENSOR ORIENTATION SHOWN FOR DETAIL ONLY. FOR ACTUAL RECOMMENDED LOCATION AND ORIENTATION REFER TO INSTALLATION INSTRUCTION MANUAL 00809-0100-4686.

3. FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DATA SHEET 00813-0100-4686.

4. 1195 MAXIMUM TEMPERATURE IS 450°F (232°C) DIRECT MOUNT ELECTRONICS, 850°F (454°C) FOR REMOTE MOUNT ELECTRONICS.

5. MATERIAL FOR 1195 IS 316/316LSS OR HASTELLOY C-276.

6. ORIFICE TYPE IS SQUARE EDGE – ORIFICE BORE SIZES 0.066 AND LARGER. FOR ORIFICES 0.010 TO 0.034 (1/2” LINE SIZE ONLY) ORIFICE TYPE IS QUADRANT EDGE.

7. 1195 RATED TO 600# ANSI / DIN PN100.

8. ½” NPT FLANGE ADAPTERS CAN BE ROTATED TO GIVE CONNECTIONS CENTERS OF 2.00-in (51mm), 2.13-in (54mm), OR 2.25-in (57mm).

9. FOR OPTIMUM PERFORMANCE, ORIENTATION AND FLOW DIRECTION IS AS FOLLOWS: GAS: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR DOWNWARD FLOW IN A VERTICAL LINE. REMOTE MOUNTING IS RECOMMENDED WITH UPWARD FLOW IN A VERTICAL LINE. LIQUID: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR UPWARD FLOW IN A VERTICAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL LINE. STEAM: REMOTE MOUNTING IS ACCEPTABLE WITH HORIZONTAL OR UPWARD FLOW IN A VERTICAL LINE. DIRECT MOUNTING IS RECOMMENDED ONLY IN A HORIZONTAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL LINE.

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

E 3.6-in (91mm) 3.9-in (99mm) 4.4-in (112mm)

F 2.6-in (66mm) 3.0-in (76mm) 3.5-in (89mm)

H 2.5-in (64mm) 3.0-in (76mm) 3.5-in (89mm)


LINE SIZEDIMENSIONS

BORE 1/2-in. (12.7mm)

0010 0.010-in (0.25mm) for 1/2" PIPE

0014 0.014-in (0.36mm) for 1/2" PIPE

0020 0.020-in (0.51mm) for 1/2" PIPE

0034 0.034-in (0.86mm) for 1/2" PIPE

0066 0.066-in (1.68mm) for 1/2" PIPE

0109 0.109-in (2.77mm) for 1/2" PIPE

0106 0.160-in (4.06mm) for 1/2" PIPE

0196 0.196-in (4.98mm) for 1/2" PIPE

0260 0.260-in (6.60mm) for 1/2" PIPE

0340 0.340-in (8.64mm) for 1/2" PIPE

0150 0.150-in (3.81mm) for 1" PIPE

0250 0.250-in (6.35mm) for 1" PIPE

0345 0.345-in (8.76mm) for 1" PIPE

0500 0.500-in (12.70mm) for 1" PIPE

0630 0.630-in (16.00mm) for 1" PIPE

0800 0.800-in (20.32mm) for 1" PIPE

0295 0.295-in (7.49mm) for 1-1/2" PIPE

0376 0.376-in (9.55mm) for 1-1/2" PIPE

0512 0.512-in (13.00mm) for 1-1/2" PIPE

0748 0.748-in (19.00mm) for 1-1/2" PIPE

1022 1.022-in (25.96mm) for 1-1/2" PIPE

1184 1.184-in (30.07mm) for 1-1/2" PIPE


B.D.

M (DOWNSTREAM) L (UPSTREAM)

FLOW

REFER TO SHEET 1 OF 9FOR 1195 BODY DIMENSIONS

THREADED PIPE ENDSPER ANSI B2.1(BOTH ENDS)

REFER TO SHEET 2 OF 9FOR ORIFICE PLATE

DIMENSIONS

1195 THREADED PIPE ENDSSIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

3 9

01195-1001NONE

BOULDER, COLORADO


®

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

L 12.4-in (315mm) 20.1-in (511mm) 28.2-in (716mm)

M 5.6-in (142mm) 8.6-in (218mm) 11.7-in (297mm)

TABLE 4 - NPT PIPE ENDS

DIMENSIONSLINE SIZE

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

L 12.4-in (315mm) 20.1-in (511mm) 28.2-in (716mm)

M 5.6-in (142mm) 8.6-in (218mm) 11.7-in (297mm)

TABLE 4 - NPT PIPE ENDS

DIMENSIONSLINE SIZE

M (DOWNSTREAM) L (UPSTREAM)

B.D.

.06-in (1.5mm)MINIMUM

(BOTH ENDS)

37-1/2°

FLOW

REFER TO SHEET 2 OF 9FOR ORIFICE PLATE

DIMENSIONS


1195 BEVELED PIPE ENDSSIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

4 9

01195-1001NONE

BOULDER, COLORADO


®

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

L 12.4-in (315mm) 20.1-in (511mm) 28.2-in (716mm)

M 5.6-in (142mm) 8.6-in (218mm) 11.7-in (297mm)

TABLE 5 - BEVELED PIPE ENDS

DIMENSIONSLINE SIZE

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

L 12.4-in (315mm) 20.1-in (511mm) 28.2-in (716mm)

M 5.6-in (142mm) 8.6-in (218mm) 11.7-in (297mm)

TABLE 5 - BEVELED PIPE ENDS

DIMENSIONSLINE SIZE

B.D.

K (DOWNSTREAM) J (UPSTREAM)

REFER TO SHEET 2 OF 9FOR ORIFICE PLATEDIMENSIONS

FLOW


SLIP-ON FLANGE:ANSI 150#, 300#, 600#ORDIN PN16, PN40, PN100

1195 SLIP-ON FLANGE PIPE ENDSSIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

5 9

01195-1001NONE

BOULDER, COLORADO


®

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

J 12.4-in (318mm) 20.2-in (513mm) 28.4-in (721mm)

K 5.7-in (148mm) 8.7-in (221mm) 11.9-in (302mm)

TABLE 6 - SLIP-ON FLANGED PIPE ENDS

DIMENSIONSLINE SIZE

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

J 12.4-in (318mm) 20.2-in (513mm) 28.4-in (721mm)

K 5.7-in (148mm) 8.7-in (221mm) 11.9-in (302mm)

TABLE 6 - SLIP-ON FLANGED PIPE ENDS

DIMENSIONSLINE SIZE

B.D.

K (DOWNSTREAM) J (UPSTREAM)

REFER TO SHEET 2 OF 9FOR ORIFICE PLATEDIMENSIONS

FLOW


WELD NECK FLANGE:ANSI 150#, 300#, 600#

1195 WELD NECK FLANGE PIPE ENDSSIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

6 9

01195-1001NONE

BOULDER, COLORADO


®

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)

J (RF 150#) 14.3-in (363mm) 22.3-in (566mm) 30.7-in (780mm)



K (RF 150#) 7.5-in (191mm) 10.9-in (277mm) 14.2-in (361mm)



TABLE 7 - WELD NECK FLANGED PIPE ENDS

DIMENSIONSLINE SIZE

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

B.D. 0.664-in (16.9mm) 1.097-in (27.9mm) 1.567-in (39.8mm)







TABLE 7 - WELD NECK FLANGED PIPE ENDS

DIMENSIONSLINE SIZE

RTDL

FLOW

R

1/2" NPT

OPTIONAL TEMPERATURE SENSOR

SIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

7 9

01195-1001NONE

BOULDER, COLORADO


®1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

R 7.4-in (188mm) 7.8-in (198mm) 8.4-in (213mm)

RTDL 3.11-in (78.9mm) 5.25-in (133.4mm) 7.50-in (190.5mm)

TABLE 8 - OPTIONAL RTD TEMPERATURE CONNECTION

DIMENSIONSLINE SIZE

1/2-in. (12.7mm) 1-in. (25.4mm) 1-1/2-in. (38.1mm)

R 7.4-in (188mm) 7.8-in (198mm) 8.4-in (213mm)

RTDL 3.11-in (78.9mm) 5.25-in (133.4mm) 7.50-in (190.5mm)

TABLE 8 - OPTIONAL RTD TEMPERATURE CONNECTION

DIMENSIONSLINE SIZE

8.8-in (223.5mm)

5.3-in(134.1mm)

4.0-in (101.6mm)

3051S TRANSMITTERSHOWN FOR REFERENCE ONLY

1/4" NPT VENT VALVES

2X GASKET - GLASS FILLEDTEFLON (PTFE)

4X STUD - ASTM A193 B7

3-VALVE MANIFOLD

12X NUT - ASTM A194




ASSEMBLE TO TRANSMITTER AND MANIFOLD

OPTIONFLOW

SIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

8 9

01195-1001NONE

BOULDER, COLORADO


®

A

.709-in(18.0mm)

.094-in(2.4mm)

DETAIL A SCALE 6 : 4 2.13-in

(54mm)

2.13-in (54mm)2.25-in (57mm)

2.00-in (51mm)

8

1.10-in (27.9mm)



8X NUT - ASTM A194

DIN 19231 TRANSMITTER

CONNECTION

ADAPTERS FOR REMOTE MOUNTING

SIZE

SCALE:

DRAWING NO.

WT. SHEET OF

A

FSCM.NO.

9 9

01195-1001NONE

BOULDER, COLORADO


®

Documents

1195 Drawings 01195-1001