11799-853 TSL-Tracsa-eng · flow cut-off/countersunk brake valve in the lifting cylinder, tip cylinder reinforced version, protection against down falling rocks, cover for cylinders

888555333---TTTSSSLLL - TD 11799 Rev. 1/2012- Page 1 of 8

Hermann Paus Maschinenfabrik GmbH, Siemensstr. 1 – 9, 48488 Emsbüren, Germany

Tel.: +49-5903-707-0, Fax.: -33, email: [email protected], internet: www.paus.de

...the people who care !

Main Features

Carrier – Main Features: The PAUS 853 TSL is a utility vehicle for underground work driven by diesel engine. The articulated TSL is equipped with a water-cooled 75 KW Deutz diesel engine complied with COM III A.The hydrostatic drive unit pro-vides optimum driving speed particularly on slopes. Due to the articulated steering the wheel loader is an ex-tremely manoeuvrable machine even in case of narrow roadway conditions. Four-wheel drive and oscillating rear axle show their advantages especially in case of bad ground conditions. The mining design stands out due to strong design the use of engines with mining approval, mining hoses, protection of headlights and many more. Additional safety features are automatic lock for rear axle during swiveling, ROPS/FOPS cabin with guard grid and deflectors on the telescopic boom. The compact dimension of the machine enables the use of the 853 TSL in gallery sizes of minimal 2,800 mm.

Flexibility due to kinematics:

The kinematics system can be swivelled horizontally by ±90° and may be extended up to 5.5 m in height over the quick change device. Due to swivel and telescopic feature a large range can be reached from standing position.

Multi-purpose use by means of attachments: Due to the quick change device various attachments may be used:

• lifting forks,

• loading shovel,

• working platform

The self-propelled working platform particularly should be emphasized, as it is not only the platform movement that can be controlled from the basket, but also the vehicle itself.





Technical Data

DIESEL ENGINE Type DEUTZ BF4M2012 water-cooled Diesel engine Power 75 kW @ 2.300 RPM Automatic engine control Dry air filter, silencer

DRIVE LINE Hydrostatic drive consisting of an adjustable pump, adjustable motor, continuously variable speed, reversible forward/backward under full load, four-wheel drive.

AXLES DANA axles, fixed planetary-rigid axle with self-locking differential, fixed front axles and rear axles as oscillating planetary rigid axle mounted on the chassis, pendulum angle +/-10°

Automatic locking of oscillating axle while swivel-ling the loading equipment

BRAKES Even braking of both axles by transfer case and universal shafts:

Service brake: hydrostatic drive, closed circuit

Parking brake: spring applied/hydraulically re-leased multiple-disc brake

Auxiliary brake: multiple-disc brake, operated hy-draulically by brake pedal

TIRES Mining tires 9.00 R 20, foamed

DRIVER’S COMPARTMENT Large, elastically supported driver’s canopy “ROPS/FOPS”, hinged rock fall protective grid for front/roof window, wipers for front and roof screen, rear window screens, access left side, emergency exit on the right side, driver’s seat with safety belt, clearly arranged dashboard and easily accessible operating devices, proportionally load-independent for lifting cylinder, tipping cylinder, swivelling cylin-der and telescopic cylinder

STEERING Articulated steering, steering angle ± 40° Hydraulic steering, emergency steering features in case of switched off engine

TURRET AND BOOM Swivelling angel ±90°

Double telescopic boom, all bearing points of the telescopic system made from extremely wear-resistant bearing bronze, friction bearing screws glued on the telescopic conduit, fixing screws of the friction bearing mechanically screwed, excess flow cut-off/countersunk brake valve in the lifting cylinder, tip cylinder reinforced version, protection against down falling rocks, cover for cylinders and hoses on the telescopic conduit, protected fitting

DOZER BLADE Hydraulically manoeuvrable, pivoted mechanically by ±8°, applicable for support of the vehicle, dozer blade hose protection

HYDRAULIC SYSTEM Pumping power 75 l/min Operating pressure 200 bar

Separate hydraulic circuits and tanks for drive unit and hydraulic operating, hydraulic tank in high-pressure design with vacuum/return flow filter, grade of filtration 10 ym, display of filter pollution in driver’s visibility. All fittings in Jic 37°.

ELECTRIC SYSTEM Main battery switch Operation voltage 24 V Alternator 28 V 55 A Battery 2 x 12 V 74 Ah

2 headlights in front of the compartment, 2 brake lights, 4 flashers, 2 stop lights, 2 reversing lights, 2 working lights at the telescopic boom, all lights are designed in LED except low beam

WEIGHTS Total weight 8,900 kg Axle loads, front 6,000 kg Axle load, rear 5,400 kg

Automatic locking of oscillating axle while swivel-ling the loading equipment

PERFORMANCE Working operation up to 6 km/h Max. speed up to 20 km/h

TRACTIVE FORCES Working operation, max. 28 kN Max. speed 3 kN Gradability 45 %

888555333---TTTSSSLLL TD 11799 Rev. 1/2012- Page 3 of 8




Variants, Options and Accessories

DIESEL ENGINE Type TCD 2012 L04 Power 75 kW @ 2.200 RPM

DRIVER’S COMPARTMENT Closed cabin with heating and air-conditioning, 2 doors with sliding windows and comfort seat, adjust-able for weight and height

FIRE SUPPRESSION SYSTEM Semi-automatic system

Fire exstinguisher

TIRES Mining tires 10.00 R 15, foamed

Spare tyre

LUBRICATION SYSTEM Central lubrication, semi-automatic

Lighting Additional head light

Flash light

Radio Remote Control Radio remote control, complete

Radio Remote control, pre-arrangement „Plug In“

ACCESSORIES Tool set

ATTACHEMENTS Bucket, 1 m³ payload 2,000 kg

shovel capacity, heaped 1.0 m³

tipping load 3,800 kg, max. lifting force 3,000 kg

Lifting hook Max lifting height 4.8m

Max payload 800kg

Lifting Folks tin width 1.200mm

tin length 1.250mm

tin cross section 120х45mm

Basket Payload 300 kg

angular freedom ±30°

size of basket 2.1 m x 2.0 m

hose break protection on lifting, tipping, telescopic, swivelling and parallel guidance cylinder, foamed tires on basic vehicle, canopy rigid mounted

Option: T7 fiction (all operations from basket)





Dimensions

Basic Vehicle

Dimension Hook:





Performance

Coverage Basic Vehicle

Coverage Hook





Coverage Folks

Coverage Bucket





Coverage Basket





Gradability, Motor BF4M2012

Documents

11799-853 TSL-Tracsa-eng · flow cut-off/countersunk brake valve in the lifting cylinder, tip cylinder reinforced version, protection against down falling rocks, cover for cylinders