Upload
crystal-chen
View
214
Download
0
Tags:
Embed Size (px)
DESCRIPTION
productsдетали Выставка Аравии Essen Welding & резки 2013 Место: [Dubai International Convention & Exhibition Centre] ---- Дубай, Объединенные Арабские Эмираты Показаны Время: JAN.07th-09, 2013, 10:00-7: 00pm JAN.10th, 2013 10:00 утра-4: 00pm Наш стенд No: E271. Приглашаем посетить наш стенд то!
Citation preview
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
Our products list:
1. MILD STEEL MIG WIRE
1) Gas-shield welding wire(ER70S-6)
2) ER49-1
3) Submerged arc welding wire
2. FLUX CORED WIRE
3. STAINLESS STEEL WELDING WIRE
4. TIG WELDING WIRE
5. ALUMINUM ALLOY WELDING WIRE
6. WELDING ELETRODE
Our factory:
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
MILD STEEL MIG WIRE
ER70S-6 –Carbon steel FWM-ER70S-6 mild steel MIG wire is an excellent choice for welding on metals with a medium to high
presence of mill-scale. For best performance use on clean, oil-free, and rust-free base material, ER70S-6 will
tolerate higher levels of surface contaminants, best weld appearance.
High silicon and manganese deoxidizer levels.ER70S-6 MIG wire is the choice for you when a bare of
non-copper coated ER70S-6 wire is preferred.
Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or
four-part gas blends.
Trade mark/
composition
C Mn Si S P Ni Mo Cr Cu
ER70S-6 0.06-0.15 1.40-1.85 0.80-1.15 ≤
0.035
≤0.025 --- ---- ≤0.50
Trade mark/
performance
Yield strength
MPA
Tensile
Strength
MPA
Extension
Rate(%)
Shock value
J(℃)
Protect gas
ER70S-6 ≥420 ≥500 ≥22 ≥27(-29) Co2
c
All position including vertical down.
Size(mm) 0.6 0.8 0.9 1.0 1.2 1.6
Plastic spool 1kilo
Plastic spool 5kilo
Plastic spool 15kilo 0.6 0.8 0.9 1.0 1.2 1.6
Metal basket 15kilo
Drum packing 100kilo
Drum packing 250kilo
Drum packing 350kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER49-1-Carbon steel FWM-ER49-1 Low alloy steel gas shield welding wire. It is able to prevent gas porosity and slag inclusion
producing due to the deoxidization depending on Mn and Si in the wire jointly. The track resistance of weld metal
can be developed and satisfactory mechanical properties can be obtained Suitable for welding carbon steel and
500 MPA grade low Alloy steel. To compared with ER70S-6, it has higher strength, lower ductility and higher
price.
Trade mark/
composition
C Mn Si S P Ni Mo Cr Cu
ER49-1 ≤0.11 1.80-2.10 0.65-0.95 ≤0.030 ≤0.030 ≤0.30 --- ≤0.20 ≤0.50
Trade mark/
performanc
e
Yield strength
MPA
Tensile
Strength
MPA
Extension
Rate(%)
Shock value J(℃) Protect
gas
ER49-1 ≥372 ≥490 ≥20 ≥47(room temperature) Co2
All position including vertical down.
Size(mm) 0.8 1.0 1.2 1.6
Plastic spool 5kilo
Plastic spool 15kilo 0.8 1.0 1.2 1.6
Metal basket 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
Submerged Arc welding wire Used with corresponding flux to get metal welding with excellent machinery properties. They have a series of
advantages, such as high production efficiency, stable welding copper-coated, unalloyed wire for submerged Arc
welding. Suitable in combination with most fluxes. Increased Si content and thus especially for neutral fluxes or
in order to increase the fluidity of the molten pool. For structural steels, ship buildings steel, pressure vessel steel,
fine grained steels, etc.
Trade mark/
composition
C Si Mn S P
EL8 0.09 0.02 0.50 0.02 0.03
EM12K 0.09 0.07 1.05 0.005 0.009
EH14 0.12 0.07 1.90 0.011 0.014
performance Yield strength
MPA
Tensile
Strength
MPA
Extension
Rate(%)
Shock value
J(℃)
H08A ≥330 ≥410 ≥22 ≥27
H08MnA ≥330 ≥410 ≥22 ≥27
H10Mn2 ≥330 ≥410 ≥22 ≥27
Depend upon flux wire combination.
Size(mm) 1.6 2.0 2.4 3.2 4.0
25kilo coil
300kilo coil
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
FLUX CORED WIRE Designed specifically for use with high Argon mixed gas, E71T-1 delivers best arc characteristics for gas-shield
flux-cored welding.
Shipbuilders and structural fabricators like it because it runs well, it’s our best running E71T-1 for high argon
gas blends, and it delivers great arc stability and fast freezing stag for easy out-of-position welding, even with
1/16” diameter wire. This wire is carefully protected from moisture contamination using the vacuum-sealed
foil bag packaging.
Trade mark/
composition
C Mn Si S P Cu
E71T-1 <0.18 ≤1.75 <0.90 ≤0.030 ≤0.040 ----
E70T-5 ≤0.12 ≤1.75 ≤0.90 ≤0.030 ≤0.030 ----
Trade
mark/
performan
ce
Yield strength
MPA
Tensile
Strength
MPA
Extension
Rate(%)
Shock value
J(℃)
E71T-1 ≥500 ≥410 ≥20 ≥27(-30℃)
E70T-5 ≥500 ≥500 ≥22 ≥27(-40℃)
Size(mm) 0.8 1.0 1.2 1.6
Plastic spool 5kilo
Plastic spool 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
STAINLESS STEEL WELDING WIRE
ER410
13Cr stainless steel solid wires for MIG welding applications.
Martensitic 410 MIG wire for joining and overlaying materials of a similar composition.
The 410 MIG wire has excellent weld-ability with low levels of spatter.
Trade mark/
composition
C Si Mn S P Cr Mo
ER410 0.01 0.35 0.50 0.02 0.02 12.5 0.02
performance Yield strength
MPA
Tensile
Strength
MPA
Elongation %
ER410 >420 ~600 ~26
Depend upon flux wire combination.
Size(mm) 0.8 1.0 1.2 1.6
Plastic spools 15kilo
AISI410
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER316L/ER316LSi 19Cr 12Ni 3Mo low carbon solid stainless steel wires for MIG and TIG welding applications.
Austenitic 316L Low carbon MIG/TIG wires for joining and overlaying materials of similar compositions.
The 316LSi MIG wire has higher silicon level which increase weld pool fluidity, producing mitre finish fillet welds
with good toe blending and low spatter.
AWS
5.9-93
C Si Mn S P Cr Ni Mo
ER316L 0.015 0.45 1.8 0.02 0.025 18.5 11.5 2.6
ER316LSi 0.01 0.85 1.95 0.01 0.015 18.5 12.0 2.5
performance Yield strength
MPA
Tensile
Strength
MPA
Elongation % Impact strength
J@20℃
ER316L ~420 ~600 ~30 ~140
ER316LSi ~470 ~600 ~35 ~140
All position including vertical down
Size(mm) 1.6 2.4 3.2
Plastic 10kilo Tube
10kilo per carton box
AISI 300 series austenitic stainless steels, particularly AISI 316 and 316L
Size(mm) 0.8 1.0 1.2 1.6
Plastic spools 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER309L/ER309LiSi 23Cr 12Ni low carbon stainless steel solid wires for MIG and TIG welding applications.
Austenitic 309L low carbon MIG/TIG wires for joining and overlaying materials of similar compositions.
The 309LSi MIG wire has higher silicon level which increase weld pool fluidity, producing mitre finish fillet welds
with good toe blending and low spatter.
AWS
5.9-93
C Si Mn S P Cr Ni
ER309L 0.02 0.4 1.9 0.002 0.02 23.5 12.5
ER309LSi 0.02 0.8 1.9 0.002 0.02 23.5 12.5
performance Yield strength
MPA
N/mm2
Tensile
Strength
MPA
Elongation % Impact strength
J@20℃
ER309L >380 ~600 >30 >40
ER309LSi >380 ~600 >30 >40
All position including vertical down
Size(mm) 1.6 2.4 3.2
Plastic 10kilo Tube
10kilo per carton box
Dissimilar joints between all 300series to itself to meld austenitic, Manganee steels, Cromweld 3Cr12
Size(mm) 0.8 1.0 1.2 1.6
Plastic spools 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER310 25Cr 20Ni stainless steel solid wires for MIG and TIG welding applications.
Fully austenitic 310 MIG/TIG wires for joining and overlaying materials a similar composition.
The MIG/TIG wires have excellent weld-ability with low levels of spatter.
AWS
5.9-93
C Si Mn S P Cr Ni Mo
ER310 0.11 0.4 1.6 0.001 0.002 25 20 0.2
performance Yield strength
MPA
N/mm2
Tensile
Strength
MPA
Elongation % Impact strength
-196℃
ER310 >380 ~600 40 60
All position including vertical down
Size(mm) 1.6 2.4 3.2
Plastic 10kilo Tube
10kilo per carton box
AISI 310 fully austenitic and scale resistant up to -1050℃ for furnace applications.
Size(mm) 0.8 1.0 1.2 1.6
Plastic spools 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER308L/ER308LSi An extra low carbon wire for the welding wire of stainless steels. Provides excellent notch toughness at very low
temperature, and deposit a maximum of 0.04% carbon in the weld metal to minimize the formation of chromium
Carbides and consequent susceptibility to intergranular corrosion.
19Cr 9Ni low carbon stainless steel solid wires for MIG and TIG welding applications.
Austenitic 308L Low carbon MIG/TIG wires for joining and overlaying materials of similar compositions.
The 308LSi MIG wire has higher silicon level which increases weld pool fluidity, producing mitre finish fillet welds
with good toe blending and low spatter.
AWS
5.9-93
C Si Mn S P Cr Ni Mo
ER308L 0.012 0.4 1.9 0.002 0.02 19.5 10.5 0.05
ER308LSi 0.012 0.85 1.9 0.002 0.02 19.5 10.5 0.05
performance Yield strength
MPA
N/mm2
Tensile
Strength
MPA
Elongation % Impact strength
J@20℃
ER308L >380 ~600 >35 >40
ER308LSi >380 ~600 >35 >40
All position including vertical down
Size(mm) 1.6 2.4 3.2
Plastic 10kilo Tube
10kilo per carton box
All 300 series austenitic stainless steel, particularly AISI 304.
Size(mm) 0.8 1.0 1.2 1.6
Plastic spools 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER347/ER347LSi 19Cr 9Ni Niobium stabilized solid stainless steel wires for MIG and TIG welding applications.
Austenitic 347 Niobium stabilized MIG/TIG wires for joining and overlaying materials of similar compositions.
The 347LSi MIG wire has higher Silicon level which increase weld pool fluidity, producing mitre fillet welds with
good blending and low spatter.
AWS
5.9-93
C Si Mn S P Cr Ni
ER347 0.02 0.45 1.95 0.01 0.015 20 10.0
ER347LSi 0.045 0.85 2.0 0.02 0.025 19.5 9.75
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation % Impact strength
20℃
ER347 ~490 ~660 ~35 ~140
ER347LSi >500 ~670 ~35 ~140
All position including vertical down
Size(mm) 1.6 2.4 3.2
Plastic 10kilo Tube
10kilo per carton box
AISI 321 AND 347
Size(mm) 0.8 1.0 1.2 1.6
Plastic spools 15kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
TIG WELDING WIRE
ER70S-2/ER70S-6 TIG welding wire has high levels of silicon and manganese to be used on slightly contaminated base materials.
Higher levels of silicon and manganese allow for better puddle fluidity and excellent wetting action, it is capable
of X-ray quality welds.
1m cut length rods embossed on each end for ease of alloy identification even after the rod is partially
consumed.
AWS
A5.18-01
C Si Mn S P Al Ti Zr
ER70S-2 0.05 055 1.20 <0.025 <0.025 0.10 0.10 0.07
ER70S-6 0.09 0.87 1.47 <0.025 <0.025 - - -
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation % Impact strength
20℃
ER70S-2 ≥480 ≥560 ≥22 ≥47
ER70S-6 >420 ≥560 ≥22 ≥47
All position including vertical down
Size(mm) 0.80 1.00 1.20 1.60
Plastic spool 0.5kilo
Plastic spool 7.0kilo
All commercially pure wrought and cast aluminum 1200,1350,1050,1080,LM0.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER1050 1050 aluminum MIG wire for welding commercially pure wrought and aluminum.
AWS
A5.10-99
Al Si Mg Mn Cu Fe
ER1050 Bal 0.04 0.002 0.02 0.05 0.16
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation %
ER1050 35 85 40
All position including vertical down
Size(mm) 1.6 2.4 3.2
Plastic 10kilo Tube
10kilo per carton box
Size(mm)(TIG) 1.60 2.40 3.20 4.00
Plastic tube 10kilo
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ALUMINUM ALLOY WELDING WIRE
ER4043 Aluminum 4043 solid wire for welding wrought and cast aluminum alloys of a similar composition.
AWS
A5.10-99
Al Si Mg Mn Cu Zn Fe
ER4043 Bal 5.00 0.05 0.05 0.30 0.10 0.60
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation %
ER4043 100 160 15
All position including vertical down
Size(mm) 0.80 1.00 1.20 1.60
Plastic spool 0.5kilo
Plastic spool 7.0kilo
Size(mm)(TIG) 1.60 2.40 3.20 4.00
Plastic tube 10kilo
All silicon bearing wrought and cast aluminum alloys 6063,6082,6061,3130,LM2,LM4,LM6,LM9,LM20,
LM25, LM27.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
ER5356
Aluminum 5356 solid wire for welding wrought and cast aluminum alloys of a similar composition.
AWS
A5.10-99
Al Si Mg Mn Cu Zn Fe
ER5356 Bal 0.16 5.00 0.10 0.05 0.10 0.16
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation %
ER5356 110 230 20
All position including vertical down
Size(mm) 0.80 1.00 1.20 1.60
Plastic spool 0.5kilo
Plastic spool 7.0kilo
Size(mm)(TIG) 1.60 2.40 3.20 4.00
Plastic tube 10kilo
All magnesium bearing wrought and cast aluminum alloys 5251, 5454, 5154, 6063, 6060, 6070, LM5.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
WELDING ELECTRODE
AWS A5.1-04:E6013
General purpose Electrode For MMA Welding Of Mild Steel
Rutile coated all positional electrodes for the repair and joining of mild steels. Producing butts and fillet welds
with a self releasing slag that is smooth and free of spatter.
AWS
A5.1-04
C Si Mn S P
ER6013 0.07 0.40 0.50 0.025 0.025
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation % Impact strength
J@℃
E6013 410-470 470-550 >22 50-100
All position including vertical down
Size(mm) 2.0x300 2.5x300 3.2x350 4.0x400 5.0x400
Kg/packet 2.5 2.5 5.0 5.0 5.0
Packets/carton 8 8 4 4 4
Kg/carton 20 20 20 20 20
All mild and medium steels.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
AWS A 5.1-04:E7018
Low hydrogen electrode for MMA welding of mild steel
Basic coated low hydrogen electrode for the joining of mild and medium carbon/Manganese steels.
Exceptional operability in all positions with excellent slag removal and spatter levels.
E7018 VP enables the electrodes to be used direct from the vaccum pack without the necessity for baking
whilst still achieving<2ml hydrogen(scale D).
AWS
A5.1-04
C Si Mn S P
ER7018 0.07 0.50 1.20 0.025 0.025
DC+/AC
(50ocv min)
50-70A 60-100A 80-150A 130-200A 150-260A
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation % Impact strength
J@℃
E7018 420-510 510-590 >22 40-80
All position including vertical down
Size(mm) 2.0x300 2.5x300 3.2x350 4.0x400 5.0x400
Kg/packet 2.5 2.5 5.0 5.0 5.0
Packets/carton 8 8 4 4 4
Kg/carton 20 20 20 20 20
DC+/AC
(70ocv min)
50-90A 65-110A 100-145
A
135-200A 180-280A
Astm A106 Gr A,B,C.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
AWS A5.1-04:ER7016
Dual coated low hydrogen electrode for MMA welding of mild steel
Basic coated low hydrogen electrode for the joining of mild and medium carbon/Manganese steels. The dual
coating enhances operability to give the same ease of use, as that of general purpose electrode with the
properties of a basic low hydrogen electrode exceptional restriking.
AWS
A5.1-04
C Si Mn S P
ER7016 0.09 0.70 0.90 0.025 0.025
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation % Impact strength
J@℃
E7016 >380 470-600 >20 >100J
All position EXCEPT vertical down
Astm A283 Grade B,C,D,A355 A570 Grade 30,33,40,50,A709 GRADE 50 API 5LX 42,46,52 and 60.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
AWS A5.1-04:ER7024
190% Recovery Lron Powder Electrode For MMA welding Of Mild Steels
High efficiency electrode for the rapid welding of mild and medium carton steels fabrications.
Producing butts and mitre finish fillet welds that have a self releasing slag that are smooth and free of spatter.
AWS
A5.1-04
C Si Mn S P
ER7024 0.07 0.50 0.80 0.020 0.020
Size(mm) 2.0x300 2.5x300 3.2x350 4.0x400 5.0x400
Kg/packet 2.5 2.5 5.0 5.0 5.0
Packets/carton 8 8 4 4 4
Kg/carton 20 20 20 20 20
DC+/AC
(70ocv min)
50-80A 60-90A 90-130A 120-180A 150-210A
performance Yield strength
MPA
N/mm2
Tensile
Strength
N/mm2
Elongation % Impact strength
J@℃
E7024 >440 510-560 >24 70J
Flat butt welds, flat fillet weld and horizontal vertical fillet weld
Size(mm) 2.0x300 2.5x300 3.2x350 4.0x400 5.0x400
Kg/packet 2.5 2.5 5.0 5.0 5.0
Packets/carton 8 8 4 4 4
Kg/carton 20 20 20 20 20
All mild and medium carbon steel.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
FARINA WELDTEC & MACHINERY CO., LTD www.farinaweldtec.com email: [email protected]
TEL: 86-0531-84809389 FAX: 86-0531-84773099 skype: Crystalchen-sales ICQ: 622993880
DC+/AC
(50ocv min)
60-100A 80-120A 130-170A 150-230A 200-320A
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn