111 fiirty-Fifth Street - A. R. Chambers · BRICKFORM Color Hardener is manufactured with the finest UV-resistant pigments and premium aggregates. ... GS-5 Gem-Seal 400 VOC ... 111

111 Thirty-Fifth StreetPittsburgh, PA 15201-1993

412-681-8955 Fax 412-681-8499

1

CONCRETE COLORING PRODUCTS 2Color Hardener 2Antique Release 3Antique-It 4Cem-Coat 4Liquid Integral Color 5Color Wax 5

STAINS AND DYES 6Blush-Tone Acid Stain 6Artesian Stain 7E-Stain 8

SEALERS 9Uremax Concrete Sealer 9Poly-Astic 9gem-seal 10Gem Cure and Seal 10Safety-Seal 11Satin-Seal 11

SEALERS & ADDITIVES 12Matte-Magic 12Traction Grip 12Strip-It 13

MAINTENANCE PRODUCTS 13Dura-Wax 13E-Etch 13

RESURFACING PRODUCTS 14SM Professional Grade 14Micro-Topping 15Stampable Overlay (Gray Mix) 16Stampable Overlay SC-60 (White Mix) 17Overlay Liquid Colorant 18Liquid Polymer - 5 Gallon Bucket 18Triple Seven Bond Coat 19Turtle Set 20

TEXTURING PRODUCTS 21Seamless Skins 21Paladiano Texture Mats 22Step Liners 22Tools and Accesories 23Release Agents 24Neutra Clean 24Evaporation Retarder 24

http://www.brickform.com/

WWW.ARCHAMBERS.COM


412-681-8955 Fax 412-681-8499

2


412-681-8955 Fax 412-681-8499

Back to Index

COLOR HARDENER

BRICKFORM Color Hardener is manufactured with the finest UV-resistant pigments and premium aggregates. BRICKFORM Color Hardener is designed to work with imprinting tools to produce clear, sharp impressions that enhance the finished appearance of any hardscape. When properly applied and troweled into newly placed, fresh concrete, it forms a colored concrete surface that is resistant to weathering, wear and normal abrasion. Color Hardener HD (Heavy Duty) also available.

* Non-fading * Denser, more durable surface * Improves abrasion resistance * Can be antiqued and stained * 42 standard colors * Custom colors available * Compatible with Stampable Overlay OL-6

RELATED PRODUCTS

* Antique Release

Packaging: 5 gallon bucket

Coverage: 80 to 100 ft2 per bucket

CONCRETE COLORING PRODUCTS



412-681-8955 Fax 412-681-8499

3


412-681-8955 Fax 412-681-8499


Back to Index

ANTIQUE RELEASE

BRICKFORM Antique Release imparts a second color while serving as a bond breaker for stamping. It is made from a finely ground formula that creates beautifully antiqued and textured concrete surfaces. Antique Release is available in 42 standard colors to match or contrast with BRICKFORM Color Hardener. Custom colors and color matching are also available.

* Richly pigmented colors * UV-resistant * Use to antique, marbleize, and faux paint * Suitable for all cementitious surfaces RELATED PRODUCTS

* Antique-It * Color Hardener * Liquid Release





412-681-8955 Fax 412-681-8499

4


412-681-8955 Fax 412-681-8499


Back to Index

Packaging: 3 lb container


ANTIQUE-IT

BRICKFORM Antique-It is a water soluble antiquing agent designed to impart a secondary color or highlight over stamped concrete or textured overlays. Antique-It is easy to apply, dries fast and provides a durable color that closely resembles the look of release powder.

RELATED PRODUCTS

* Antique Release

CEM-COAT

BRICKFORM Cem-Coat is a richly pigmented coating, opaque, high-strength, and perfect for coloring any unsealed, concrete surface. BRICKFORM Cem-Coat reduces the effects of fungus and is extremely UV-resistant. BRICKFORM Cem-Coat is available in all 42 standard BRICKFORM Color Hardener and BRICKFORM Antique Release colors. Custom color matching is also available.

Packaging: 2 part kit

Coverage: 100 to 125 ft2 small kit 360 to 450 ft2 large kit



412-681-8955 Fax 412-681-8499

5


412-681-8955 Fax 412-681-8499


Back to IndexCoverage: 350 to 400 ft2 per gallon

LIQUID INTEGRAL COLOR

BRICKFORM Liquid Color is made from the finest UV-resistant pigments available. BRICKFORM Liquid Color is produced to a one-percent tolerance to established plant standards and also complies with ASTM C979, Pig-ments for Integrally Colored Concrete. BRICKFORM Liquid Color is designed to suspend and disperse the iron oxide pigments evenly. BRICKFORM Liquid Color is available in standard and designer colors. Custom colors and color matching are also available.

* Dust-free * UV-resistant color * Mixes evenly * Meets ASTM C979

RELATED PRODUCTS

* ColorFlo® Liquid Color * Powdered Integral Color (10 lb plastic dissolvable bags)

COLOR WAX

Color Wax is a wax-modified colored concrete cure and seal formulated for exterior or interior concrete surfaces. It has excellent adhesion properties and superior resistance to ultraviolet light, as well as resistance to acids, oils, mildew and alkalies while creating a non-gloss finish. Color Wax is available in all standard BRICKFORM and SOLOMON integral colors to give you the same color as the color of the concrete. (Color Wax is made to order, custom colors available.)

* Easy clean-up * Water-based * Improves color consistency * Enrich existing color * User-friendly



412-681-8955 Fax 412-681-8499

6


412-681-8955 Fax 412-681-8499

Back to Index

BLUSH-TONE ACID STAIN

BRICKFORM Blush-Tone Acid Stain, Chemical Stain For Concrete, reacts with minerals that exist in newly cured or existing concrete, penetrating the very top layer of the concrete surface with color that will not chip, crack, or peel. The colors produced in each section of concrete will be unique with captivating, multi-colored intensities that become a permanent part of the concrete. BRICKFORM Blush- Tone Acid Stain is available in 10 standard colors.

Penetrating Chemical Stain Variegated Color Will Not Chip, Crack, Or Peel Use On Floors And Walls

Acid stains, water-based stains, and dyes are versatile as they are beautiful. Stain old and new concrete.

* CS Blush-Tone Acid Stain * CS-100 Blush-Tone Acid Stain – Jade * CS-200 Blush-Tone Acid Stain – Turqoise * CS-300 Blush-Tone Acid Stain – Coffee * CS-400 Blush-Tone Acid Stain – Caramel * CS-500 Blush-Tone Acid Stain – Mahogany * CS-600 Blush-Tone Acid Stain – Ebony * CS-700 Blush-Tone Acid Stain – Mission Brown * CS-800 Blush-Tone Acid Stain – Amber * CS-900 Blush-Tone Acid Stain – Olive * CS-1000 Blush-Tone Acid Stain – Walnut

STAINS AND DYES



412-681-8955 Fax 412-681-8499

7


412-681-8955 Fax 412-681-8499

STAINS AND DYES

Back to Index

Packaging: 1 gal bottle

Coverage: approximately 200 ft2 per gallon, per coat

ARTESIAN STAIN

BRICKFORM ARTesian stains are penetrating, water-based stains that produce unique color effects in finished cementitious surfaces that simulate the natural shadings and aged appearance of stone or masonry. ARTesian Stain may be applied over smooth troweled or textured concrete, cement-based overlayments, vertical or hori-zontal concrete and masonry surfaces, artificial rock displays, water features and themed finishes.

The color effect produced is unique to each stained surface and cannot be duplicated with other materials. AR-Tesian Stain contains no acids or harmful chemicals and works as an alternative to typical reactive acid stains. There are no acids or harmful chemicals integrated in its design.

* Zero VOC * Water-based * Interior/Exterior Use * Apply With Sprayer * Must Be Sealed With Solvent- Based Sealer



412-681-8955 Fax 412-681-8499

8


412-681-8955 Fax 412-681-8499

STAINS AND DYES

Back to Index

Packaging: 1 gallon bottle

Coverage: approximately 200 ft2 per gallon

E-STAIN

BRICKFORM E-Stain is a water-based formulation containing reactive mineral compounds and proprietary admixtures. BRICKFORM E-Stain contains no hydrochloric acid, making it more environmentally friendly.

BRICKFORM E-Stain is ideally suited for use in the Micro-Topping, SM Professional Grade, Stampable Overlay, and cast in place concrete.

BRICKFORM E-Stains are penetrating, reactive stains that produce unique color effects in finished cementitious surfaces that simulate the natural shadings and aged appearance of stone or masonry. The color effect produced is unique to each stained surface and cannot be duplicated with other materials. BRICKFORM E-Stain creates a chemical reaction within the concrete substrate. This reaction slightly etches the concrete surface to provide deeper and more permanent color.

The color value of the stain can be reduced by blending the stain with E-Stain Plus. Special colors can be pro-duced by blending two or more colors together.

* Eco-Friendly Reactive Stain * Acid-Like Characteristics Without the Harmful Acid Effects * All Colors (except EBONY) Do Not Contain Sodium Dichromate a Known Carcinogen * No Harmful Fumes * D.O.T. Non-Hazardous Shipping Certified Stain



412-681-8955 Fax 412-681-8499

9


412-681-8955 Fax 412-681-8499

Back to Index

Add high gloss or satin finishes to concrete with a wide range of con-crete sealers. Highlight and protect decorative concrete.

UREMAX CONCRETE SEALER

BRICKFORM UreMax WB is a two-part, matte-finish, water-based polyurethane that forms a high-solids coating. UreMax WB preserves and protects any above-grade concrete, masonry or stone. It is the most durable, chemical-resistant barrier coating of the BRICKFORM sealers, without the odor typically found in solvent-borne sealers.

Formulated to seal and protect concrete and masonry that is subject to heaviest use conditions, BRICKFORM UreMax WB is chemically resistant and highly durable.

* UMS Uremax Concrete Sealer * UMS-1 Uremax Concrete Sealer Kit * UMS-4 Uremax Concrete Sealer Kit

Packaging: 2 PART KIT

Coverage: approximately 350 to 600 ft2 per gallon, depending on porosity of the surface

POLY-ASTICPremium, High-Build, Poly-Aspartic Sealer - Zero VOC

BRICKFORM Poly-Astic is a two-part high solids, high build sealer designed for interior use on concrete or masonry surfaces. Poly-Astic allows for single coat high film thickness in a water clear finish. Poly-Astic provides a very smooth, mirror like finish not attainable with any other product.

* Non-yellowing, crystal clear * Interior use only * Enhances color * Easy to apply

Packaging: 2 PART KIT

Coverage: 100 to 200 ft2 per gallon

SEALERS



412-681-8955 Fax 412-681-8499

10


412-681-8955 Fax 412-681-8499

SEALERS

Back to Index

GEM-SEAL

Gem-Seal is a high-gloss, solvent-based, non-yellowing sealer. A light coating of this UV-resistant sealer will protect and enhance colored and textured concrete. Use Gem-Seal on porous con-crete and masonry to form a shield against stains and mildew.

* Non-Yellowing, Crystal Clear * Dries To A “Wet-Look” Finish * Interior/Exterior Use * Enhances Color

▶ GS Gem-Seal ▶ GS-1 Gem-Seal 400 VOC – 1 Gallon Can ▶ GS-5 Gem-Seal 400 VOC – 5 Gallon Pail ▶ GS1-100 Gem-Seal 100 VOC – 1 Gallon Can ▶ GS5-100 Gem-Seal 100 VOC – 5 Gallon Pail ▶ GS1-700 Gem-Seal 700 VOC – 1 Gallon Can ▶ GS5-700 Gem-Seal 700 VOC – 5 Gallon Pail

Packaging: 5 gallon can / 1 gallon can

Coverage: approximately 250 to 300 ft2 per gallon depending on porosity of the surface.

GEM CURE AND SEAL

Gem Cure & Seal is a solvent based, clear acrylate copolymer curing compound, dust proofer and sealer all in one. Gem Cure & Seal minimizes moisture loss from evaporation in newly placed concrete to provide maximum strength, hardness and protection. Reducing water evaporation loss will result is a stronger, denser, more durable concrete with higher compressive strength, and better crack and freeze-thaw resistance.

* Interior/Exterior * Can Be Colored & Stained

▶ GCS Gem Cure and Seal ▶ GCS-10018 Gem Cure and Seal 309 – 100 VOC ▶ GCS-35018 Gem Cure and Seal 309 – 350 VOC ▶ GCS-35025 Gem Cure and Seal 1315 – 350 VOC ▶ GCS-65025 Gem Cure and Seal 1315 – 650 VOC

Packaging: 5 gallon can / 1 gallon can

Coverage: approximately 250 to 300 ft2 per gallon depending on porosity of the surface.



412-681-8955 Fax 412-681-8499

11


412-681-8955 Fax 412-681-8499

SEALERS

Back to Index


Coverage: approximately 250 to 300 ft2 per gallon depending upon porosity of the surface. Spray application recommended.

Packaging: 5 gallon can

Coverage: approximately 200 to 300 ft2 per gallon depending upon porosity of the surface.

SAFETY-SEAL

Safety-Seal with Traction-Grip, Low-Sheen Sealer - 400 VOC or 100 VOC BRICK-FORM Safety-Seal is designed to be slip-resistant and is ideal around pool decks and areas where water or mois-ture can accumulate. Safety- Seal is a solvent-based sealer that protects concrete surfaces from stains and mildew. BRICKFORM Safety-Seal dries to a beautiful matte finish that is UV-resistant.

* Lacquer Based * Dries To A Low-Sheen Finish * Interior/Exterior Use * Micronized Slip-Resistant Additives

MS Safety-Seal MS-5 Safety-Seal 400 VOC – 5 Gallon Pail MS5-100 Safety-Seal 100 VOC – 5 Gallon Pail

SATIN-SEAL

Satin-Seal, Satin-Finish “Natural-Look” Sealer - 100 VOC BRICKFORM Satin-Seal is a non-flammable product, designed to protect concrete with a satin finish. This water-based acrylic VOC-compliant sealer reduces the effect of efflorescence on porous surfaces, while forming a nonyellowing, scuff-resistant finish that resists moisture penetration.

* Non-Yellowing * Dries To Stain-Finish * Interior/Exterior Use * Scuff-Resistant



412-681-8955 Fax 412-681-8499

12


412-681-8955 Fax 412-681-8499

Back to Index

SEALERS & ADDITIVES

Packaging: 1 lb jar

Coverage: 1 jar per 5 gallon sealer

MATTE-MAGIC

Matte-Magic, Gloss Reducing Additive BRICKFORM Matte-Magic is a powdered flattening agent additive for Brickform solvent based sealers. The original topcoat gloss is reduced based on the amount of additive used. The finished gloss reflectance can be varied from semi-gloss to satin. Matte-Magic comes in 16 oz units, with cases of 8 units. Each unit is added to a 5 gallon sealer for gloss reduction.

* Effectively Reduces Gloss * Reduced Reflectance Helps Distinguish Floor Color * Solid Additive Is Easy To Measure And Mix * Additive Does Not Affect Viscosity * More Effective Than Liquid Matte Magic

Packaging: 8 ounce can

Coverage: 1 to 2 cans per 5 gallon sealer

TRACTION GRIP

Traction Grip™ Traction Grip is an anti-slip micronized powder that adds texture to decorative sealers (BRICK-FORM Gem-Seal, Poly-Seal, and Satin Seal). The lightweight spherical shape and clarity gives Traction Grip its specific properties. Applications include inclined driveways, garages, steps, patios and pool decks.

* No Sharp Edges * Disperses Easily * Does Not Affect Color

Use the Project Calculator to estimate the product needed for your project.



412-681-8955 Fax 412-681-8499

13


412-681-8955 Fax 412-681-8499

Back to Index

Packaging: 5 gallon bucket / 1 gallon bottle


STRIP-IT

BRICKFORM Strip-It™ BRICKFROM Strip-It is an environmentally sound and user-safe stripper for solvent-based sealers and paints. Strip-It may be used on all masonry surfaces including concrete, quarry tile, ceramic tile, terrazzo, cementitious overlays and other surfaces. Strip-It meets 2005 Califor-nia Air Resources Board V.O.C. standards (less than 50% V.O.C. by weight).

* Non-Flammable * Contains No Methylene Chloride

MAINTENANCE PRODUCTS

DURA-WAXDura-Wax is an acrylic wax that forms a long-lasting protective coating over a BRICKFORM sealer. Dura-Wax provides wear-resistant sacrificial coating. Dura-Wax stands up to the heaviest of traffic conditions. It is easily applied and can be re-coated up to 100 times without having to strip the floor. It will not powder and it can be mopped or cleaned time after time without damaging its original shine. Ideal for ongoing maintenance.

* Super-Tough Film * Semi-Gloss * Interior Use Only * Slip-Resistant

E-ETCH

Surface Deactivator makes exposed aggregate finishes easier and more consistent. It is topically applied to freshly-placed concrete to prevent cement paste hardening and achieve more controlled exposed aggregate finishes. Unlike sugar-based retarders with uncertain levels of retardation, Surface Deactivator selectively halts the hydration pro-cess down to a controlled depth.

Packaging: 5 gallon pail / 1 gallon bottle

Coverage: approximately 500 to 1000 ft2 per gallon depending on porosity of the surface





412-681-8955 Fax 412-681-8499

14


412-681-8955 Fax 412-681-8499

Back to Index

RESURFACING PRODUCTSRestore and improve concrete surfaces with micro-toppings, stampable overlays and spray mixes.

Packaging: 60 lb bag

Coverage: Base coat - 150 to 300 ft2 per bag depending on texture and porosity of the concrete. Texture coats can be troweled or sprayed on at a rate of 150 - 200 ft2 per 60 lb bag.

SM PROFESSIONAL GRADE

SM Professional Grade™ Rough Grade Micro-Topping Sprayable Cementitious Overlay BRICKFORM SM Pro-fessional Grade is a sprayable cementitious overlay that is designed to be applied with a hopper gun. It can be integrally colored using BRICKFORM Overlay Liquid Colorant. BRICKFORM SM Professional Grade can be used to create the look of brick, stone, tile or other unique specialty finishes.




412-681-8955 Fax 412-681-8499

15


412-681-8955 Fax 412-681-8499

RESURFACING PRODUCTS

Back to Index

Restore and improve concrete surfaces with micro-toppings, stampable overlays and spray mixes.


Coverage: Will cover between 150 to 350 ft2 per bag depending on the depth at which it is applied and the texture and porosity of the surface to which it is applied. Applications over the Brickform SM Professional Grade base coat can yield greater coverage rates.

MICRO-TOPPING

BRICKFORM Micro-Topping, Smooth Grade BRICKFORM Micro-Topping is used on interior or exterior cured concrete to create a durable surface that can be colored or stained. It is available as a white or gray dry powder in Smooth grade, and mixed with BRICKFORM Liquid Polymer. The Smooth Grade is applied over SM Profession-al Grade for a smooth finish when desired. The mixed materials form a thin concrete coating that can be used to restore or repair any concrete surface.

Interior/Exterior Use

Creates A New Surface

Can Be Colored & Stained

* MT Micro-Topping * * MT-1500 Micro-Topping Gray Smooth – 40 lb. bag * * MT-2500 Micro-Topping White Smooth – 40 lb. bag



412-681-8955 Fax 412-681-8499

16


412-681-8955 Fax 412-681-8499


Back to Index


Packaging: 60 lb bucket

Coverage: 27 ft2 per 60 pound bucket at 1/4” thickness for trowel applications. Broom applications will vary with thickness and texture. Product CANNOT be applied thinner than 1/4”. It will hydrate too quickly and shrinkage will occur.

STAMPABLE OVERLAY (GRAY MIX)BRICKFORM Stampable Overlay (OL-60) is a gray cement premixed blend of special materials that, when mixed with water, forms a thin, Stampable concrete coating. OL-60 resembles gray concrete and is the only stampable overlay that can be used with Color Hardener and Antique Release. BRICKFORM Stampable Overlay is easy to install and forms a tough, durable topping that will withstand years of wear. When used on properly prepared surfaces, BRICKFORM Stampable Overlay will permanently bond to concrete surfaces.

* Interior/Exterior Use * Creates A New 1/4”-1/2” Surface * Can Be Textured & Colored * Durable * Use with Color Hardener and Antique Release



412-681-8955 Fax 412-681-8499

17


412-681-8955 Fax 412-681-8499


Back to Index



Coverage: 25 ft2 per 60 lb bag at 1/4” thickness * For use with Overlay Liquid Colorant

STAMPABLE OVERLAY SC-60 (WHITE MIX)

BRICKFORM Stampable Overlay (SC-60) is a white cement, premixed blend of special materials that, when mixed with water, forms a thin, stampable concrete coating. SC60 Stampable overlay can be integrally colored using BRICKFORM Overlay Liquid Colorants and topically colored with a wide range of BRICKFORM coloring products. BRICKFORM Stampable Overlay is easy to install and forms a tough, durable topping that will with-stand years of wear. When used on properly prepared surfaces, BRICKFORM Stampable Overlay will perma-nently bond to concrete surfaces.

* Interior/Exterior Use * Creates A New 1/4”-1/2” Surface * Can Be Textured & Colored * Durable * Can be integrally colored with BRICKFORM Overlay Liquid Colorant



412-681-8955 Fax 412-681-8499

18


412-681-8955 Fax 412-681-8499


Back to Index

OVERLAY LIQUID COLORANT

BRICKFORM Overlay Liquid Colorant is an engineered blend of color admixtures for the BRICKFORM Stam-pable Overlay SC-60, Micro-Topping and SM Professional Grade product lines. BRICKFORM Overlay Liquid Colorant is UV resistant and manufactured to strict standards to ensure color uniformity and consistency.

BRICKFORM Overlay Liquid Colorants are non-hazardous water-based formulations providing easy clean up and no hassle shipping. BRICKFORM Overlay Liquid Colorant is available in 39 standard colors, packaged in 10 oz. bottles.

See the BRICKFORM Standard Color Selection color card for a complete list of available color.


Packaging: Six 10 oz. bottles

Coverage: One 10 oz. bottle per bag of Micro Topping / SC-60 Overlay

LIQUID POLYMER - 5 GALLON BUCKET

BRICKFORM Liquid Polymer is specially designed to be used with BRICKFORM Micro-Topping and BRICK-FORM SM Professional Grade.

The BRICKFORM SM Professional Grade and Micro-Topping SG is mixed with the BRICKFORM Liquid Poly-mer only—do not use any other additives. Gently stir the BRICKFORM Liquid Polymer prior to use. Always measure the polymer, Overlay Liquid colorant and grout to the proper proportions as variations in these can lead to differences in color and texture.

* Use with Micro-Topping and SM Professional Grade




412-681-8955 Fax 412-681-8499

19


412-681-8955 Fax 412-681-8499


Back to Index



Coverage: 800 to 1200 ft2 per 5 gallon bucket. Coverage will vary according to the porosity and compositon of the floor material.

TRIPLE SEVEN BOND COATBRICKFORM Triple Seven Bond Coat, Primer for Cementitious Overlays BRICKFORM Triple Seven Bond Coat is an entirely new concept in primers for cementitious materials. It prevents the concrete from absorbing water from the overlay material making it easier to spread and achieve a smooth surface.

Also, Triple Seven Bond Coat is a reactive primer, remaining active for at least two hours after it is applied. It re-acts and forms a chemical link between the overlay and the substrate. Triple Seven Bond Coat increases the bond strength by creating a more efficient chemical link between the concrete and the overlay.

* Reactive Primer * Easy Application * Greatly Enhances Bonding To Concrete * Prevents The Sub-Floor From Absorbing Moisture From Overlay * Interior/Exterior Use

BC Triple Seven Bond Coat BC-007 Triple Seven Bond Coat – 5 Gallon Bucket BC-0071 Triple Seven Bond Coat – 1 Gallon Bottle



412-681-8955 Fax 412-681-8499

20


412-681-8955 Fax 412-681-8499


Back to Index



Coverage: Add 4 to 8 oz to each bag overlay material (no more than 16 oz).

TURTLE SET

BRICKFORM Turtle Set Brickform Turtle Set is a retardant designed for use with Brickform SM Professional Grade, Micro-Topping, OL-60 and SC-60 Stampable overlay products. Easily measured liquid form increases pot life and set times for greater control with resurfacing products in warm weather.


BRICKFORM Overlay Liquid Colorant is an engineered blend of color admixtures for the BRICKFORM Stam-pable Overlay SC-60, Micro-Topping and SM Professional Grade product lines. BRICKFORM Overlay Liquid Colorant is UV resistant and manufactured to strict standards to ensure color uniformity and consistency.

BRICKFORM Overlay Liquid Colorants are non-hazardous water-based formulations providing easy clean up and no hassle shipping. BRICKFORM Overlay Liquid Colorant is available in 39 standard colors, packaged in 10 oz. bottles.

See the BRICKFORM Standard Color Selection color card for a complete list of available color.



412-681-8955 Fax 412-681-8499

21


412-681-8955 Fax 412-681-8499

Back to Index

TEXTURING PRODUCTS

SEAMLESS SKINSBRICKFORM Seamless Skins™ are feathered-edged skins that produce continuous texture with no grout or joint lines. BRICKFORM texture skins are available in standard-grade and ultra-flexible materials, all designed with unsurpassed quality. Seamless skins are compatible with BRICKFORM Stampable Overlay. They are available in Standard-Flexible and Ultra-Flexible varieties.

Blue Stone Texture

A natural stone surface with a sandy texture that includes clefts which leave a layered appearance.

Rough Stone Texture

A natural stone texture characterized by a continuous coarse surface with several distinguishing veins.

Desert SlateTexture

A simulated slate texture that combines numerous clefts and irregular surfaces to create the ideal concrete impressions.



412-681-8955 Fax 412-681-8499

22


412-681-8955 Fax 412-681-8499

TEXTURING PRODUCTS

Back to Index

PALADIANO TEXTURE MATS

The Paladiano “Wonders of the World” Texture Mats by Bob Harris specialty tools are cast from natural stones in historical regions, using authentic textures and shapes that are pleasing to the eye from all angles. England, Italy, Bulgaria, Greece, Cyprus and France all inspired the “Wonders of the World” stamping tool line.

STEP LINERS

Step-Liners are designed to produce texture on the edges of concrete steps, risers, terracing, and even concrete countertops. These Step-Liners can be reused many times. Attach the liner to your riser forms and impart the beauty of natural stone. They have no top or bottom and can be reversed to reduce pattern repeat. Brickform Step-Liners are high-quality, flexible polyurethane, engineered to be lightweight and extremely durable.



412-681-8955 Fax 412-681-8499

23


412-681-8955 Fax 412-681-8499

TEXTURING PRODUCTS

Back to Index

TOOLS AND ACCESORIES

Aluminum Chisels

Aluminum Chisels are lightweight, easy to handle and designed with the concrete finisher in mind. Cut control joints in wet concrete, create your own pattern or touch-up grout lines with ease.

Pounders

Find the pounder that is right for you and your job. BRICKFORM now offers a new BRICKFORM Aluminum Handle Pounder that is light with a long-handled grip. It is designed with a flexible head that reduces fatigue on the neck and shoulders. Of course, you can’t forget about the popular Original BRICKFORM Pounder that has a rigid head with a fixed placed handle.

Grouting Tools

BRICKFORM Grouting Tools create a sanded grout line. Use the rigid tool for straight lines and the flexible tool for curved or wavy grout lines.

Touch-Up Wheels

BRICKFORM Touch-up Wheels are part of the BRICKFORM Texture Mat System and are designed to help installers create clean and crisp grout lines. These wheels are very versatile and lightweight, making them easy to use; even in the tightest areas. BRICKFORM Touch-up Wheels are available in seven styles to compliment the full range of BRICKFORM Texture Mats.



412-681-8955 Fax 412-681-8499

24


412-681-8955 Fax 412-681-8499

TEXTURING PRODUCTS

Back to Index

RELEASE AGENTS

BRICKFORM Liquid Release, Colorless Bond-Breaker For Stamping BRICKFORM Liquid Release is a colorless bond breaker, formulated and recommended for use with all BRICKFORM Texture Mats and with many other architectural concrete texturing systems. BRICKFORM Liquid Release forms a lubricating barrier that prolongs the life of the imprinting tools by decreasing the friction between the mats and the concrete.

* Prevents Mats Sticking To Concrete * Easy-To-Apply Liquid * Prolongs Tool Life * Interior/Exterior Use * Apply With Sprayer

NEUTRA CLEAN

BRICKFORM Neutra Clean is a cleaning and neutralizing agent engineered for use on acid and reactive stained floors prior to sealing and to remove light oil, grease or other types of soils from colored, imprinted and natural concrete surfaces. This product com-bines cleaning and light degreasing without the use of petroleum solvents and effectively loosens residues from the staining process as well as loosening release powders from stamped concrete.

EVAPORATION RETARDERBRICKFORM Evaporation Retarder extends working time for coloring and stamping. Evaporation Retarder is formulated to be V.O.C. compliant. This water-based film minimizes the evaporation of water from the surface of newly placed concrete, extending both workability and finishing time. Evaporation Retarder comes in an odorless concentrate that is mixed with water, making it economical and environmentally friendly. Evaporation Retarder will not affect the final cure and concrete strength.

Economical Easy To Apply Interior/Exterior Use Apply With Sprayer


Documents

111 fiirty-Fifth Street - A. R. Chambers · BRICKFORM Color Hardener is manufactured with the finest UV-resistant pigments and premium aggregates. ... GS-5 Gem-Seal 400 VOC ... 111