Photographs are for illustrative purposes only and may not reflect final specification.

All information in this document is substantially correct at time of printing and may be altered subsequently. Publication No. PN1783/09/12 Produced in England 2012 Perkins Engines Company Limited

1100 Series 1104A-44TG1 Diesel Engine ElectropaK64.3 kWm at 1500 rpm 75.5 kWm at 1800 rpm

Building upon Perkins proven reputation within the power generation industry, the 1100 Series range of ElectropaK engines now fit even closer to customers needs.

In the world of power generation success is only gained by providing more for less. With the 1104A-44TG1 Perkins has engineered even higher levels of reliability, yet lowered the cost of ownership.

1100A units are designed for territories that do not require compliance to EPA or EU emissions legislation. These units are able to meet TA luft legislation.

Compact, efficient powerl 1100 Series is the result of an intensive period of customer

research that has guided the development of the range

l The new 4.4 litre cylinder block ensures bore roundness is maintained under the pressures of operation. It also ensures combustion and mechanical noise is lowered

l A new cylinder head has re-established Perkins mastery of air control

Quality by designl Product design and Class A manufacturing improvements

enhance product reliability while maintaining Perkins legendary reputation for durability

Cost effective powerl Compact size and low noise

l Lower fuel consumption and oil use

l 500 hour service intervals

l 2 year warranty

Product supportl Perkins actively

pursues product support excellence by ensuring our distribution network invest in their territory strengthening relationships and providing more value to you, our customer

l Through an experienced global network of distributors and dealers, fully trained engine experts deliver total service support around the clock, 365 days a year. They have a comprehensive suite of web based tools at their fingertips covering technical information, parts identification and ordering systems, all dedicated to maximising the productivity of your engine

l Throughout the entire life of a Perkins engine, we provide access to genuine OE specification parts and service. We give 100% reassurance that you receive the very best in terms of quality for lowest possible cost .. wherever your Perkins powered machine is operating in the world

Engine Speed(rev/min)

Type of Operation

Typical GeneratorOutput (Net)

Engine Power

Gross Net

kVA kWe kWm bhp kWm bhp

1500 Prime Power 65.0 52.0 59.6 79.9 58.4 78.3

Standby Power 71.5 57.2 65.6 88.0 64.3 86.2

1800 Prime Power 76.0 60.8 70.7 94.8 68.6 92.0

Standby Power 83.6 66.9 77.8 104.3 75.5 101.2

The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1. Derating may be required for conditions outside these; consult Perkins Engines Company Limited.

Generator powers are typical and are based on an average alternator efficiency and a power factor (cos. q) of 0.8. Fuel specification: BS 2869: Part 2 1998 Class A2 or DIN EN 590. Lubricating oil: 15W40 to API CG4.

Rating Definitions Prime Power: Variable load. Unlimited hours usage with an average load factor of 80% of the published prime power over each 24 hour period. A 10% overload is available for 1 hour in every 12 hours of operation. Standby Power: Variable load. Limited to 500 hours annual usage, up to 300 hours of which may be continuous running. No overload is permitted.

Photographs are for illustrative purposes only and may not reflect final specification.

All information in this document is substantially correct at time of printing and may be altered subsequently. Publication No. PN1783/09/12 Produced in England 2012 Perkins Engines Company Limited

Perkins Engines Company LimitedPeterborough PE1 5FQ United Kingdom Telephone +44 (0)1733 583000 Fax +44 (0)1733 582240www.perkins.com

1100 Series 1104A-44TG1 Diesel Engine ElectropaK64.3 kWm at 1500 rpm 75.5 kWm at 1800 rpm

Standard ElectropaK specification

Air inlet l Mounted air filter

Fuel systeml Rotary type pumpl Ecoplus fuel filter

Lubrication systeml Wet sump with filler and dipstickl Spin-on oil filter

Cooling systeml Thermostatically-controlled system with gear-driven

circulation pump and belt-driven pusher fanl Mounted radiator and piping

Electrical equipmentl 12 volt starter motor and 12 volt 65 amp alternator with DC

outputl 12 volt shutdown solenoid energised to runl Glow plug cold start aid

Flywheel housingl High inertia flywheel to SAE J620 size 10/1112l SAE 3 flywheel housing

Literaturel Users Handbook

Optional equipmentl Woodward electronic governor (LCG2)l Workshop manuall Parts book

Fuel Consumption

Engine Speed1500 rev/min 1800 rev/min

g/kWh l/hr g/kWh l/hr

Standby 207 16.2 211 19.5

Prime Power 208 14.8 211 17.7

75% of Prime Power 209 11.2 214 13.5

50% of Prime Power 224 8.0 229 9.6

General dataNumber of cylinders ........................................... 4 vertical in-lineBore and stroke ....................................................105 x 127 mmDisplacement ................................................................ 4.4 litresAspiration ..............................................................TurbochargedCycle ..............................................................................4 strokeCombustion system ..............................................Direct injectionCompression ratio .......................................................... 17.25:1Rotation ...............................Anti-clockwise viewed from flywheelCooling system .......................................................Water-cooledTotal lubrication system capacity.................................... 8.0 litresTotal coolant capacity .................................................. 13.0 litresDimensions Length .................................................. 1241 mm Width ...................................................... 629 mm Height ..................................................... 951 mmDry weight (approx.) ......................................................... 463 kgFinal weight and dimensions will depend on completed specification

1241 mm

1046 mm

629 mm

951 mm