10th

International Symposium on

Impact Engineering 2019

ISIE 2019

July 2-5, Gmunden, Austria

CONFERENCE PROGRAM

Scientific Committee

Name Affiliation

Prof. Hans Henning-Kausch, Honary Chairman

Ecole Polytechnique Federale de Lausanne

Prof. Woei-Shyan Lee Department of Mechanical Engineering, National Cheng Kung University

Prof. Kazunori Fujikake Department of Civil and Environmental Engineering, National Defense Academy, Japan

Prof. Kazuyuki Hokamoto Institute of Pulsed Power Science, Kumamoto University

Assoc. Prof. Takeshi Iwamoto Department of Mechanical Systems Engineering, Hiroshima University

Prof. Takayuki Kusaka Department of Mechanical Engineering, Ritsumeikan University

Assoc. Prof. Hiroyuki Yamada Department of Mechanical Engineering, National Defense Academy

Prof. Keiko Watanabe Department of Mechanical Engineering, Ritsumeikan University

Prof. Dan Mihai Constantinescu University “Politehnica“ of Bucharest

Prof. László Tóth Bay Zoltán Nonprofit Ltd. for Applied Research, Engineering Division (BAY-ENG)

Carmine Pappalattere University of Bari

Alessandro Freddi University of Bologna

Leopold Kruszka Jaroslaw Dabrowski Military University of Technology

Prof. Hyung-Seop Shin Department of Mechanical Design Engineering, Andong National University Korea

Prof. Victor P.W. Shim Department of Mechanical Engineering, National University of Singapore

Prof. Michael Worswick Department of Mechanical and Mechatronics Engineering, University of Waterloo Canada

Prof. Jenn-Terng Gau Department of Mechanical Engineering, Northern Illinois University

Prof. Chiem Chi-Yuen President General of Association Euro-Medlan, President of the Scientific Interest Group (GIS) in Impact Engineering

Prof. Patricia Frontini Faculdad de Ingineria, Universidad Nacional de Mar del Plata

Prof. Jerzy Kaleta Department of Mechanics, Materials Science and Engineering, Wroclaw University of Technology

Dr. Aitor Arriaga Leartiker Polymer R&D, Markina-Xemein, Spain

1

Organizing Committee

Name Affiliation

Prof. Erich Peter Klement Honorary Chairman of the Organizing Committee, Department of Knowledge-Based Mathematical Systems, Johannes Kepler University

Prof. Zoltán Major Chairman of the Organizing Committee, Institute of Polymer Product Engineering, Johannes Kepler University

Dr. DI Matei-Constantin Miron Institute of Polymer Product Engineering, Johannes Kepler University

DI Veronika Maria Miron Institute of Polymer Product Engineering, Johannes Kepler University

Gabriel Seebach Institute of Polymer Product Engineering, Johannes Kepler University

Prof. Hidetoshi Kobayashi Department of Mechanical Science and Bioengineering, Osaka University

Prof. Tadaharu Adachi Department of Mechanical Engineering, Toyohashi University of Technology

Prof. Masaaki Itabashi Department of Mechanical Engineering, Suwa University of Science

Prof. Josef Eberhardsteiner Institute for Mechanics of Materials and Structures, Technische Universität Wien

Prof. Martin Schagerl Institute of Structural Lightweight Design, Johannes Kepler University

Prof. Reinhold W. Lang Institute of Polymeric Materials and Testing, Johannes Kepler University

Ass.-Prof. Helmut Holl Institute of Technical Mechanics, Johannes Kepler University

Prof. Peter Fischer Institute für Fahrzeugtechnik, Graz University of Technology

Prof. Gerald Gerhard Pinter Department Polymer Engineering and Science, Montanuniversität Leoben

Prof. Reinhard Pippan Chair of Materials Physics, Montanuniversität Leoben

Dr. DI Peter Hehenberger University of Applied Sciences Upper Austria

DI Peter Reithofer 4a Engineering GmbH

DI Ferdinand Schwinger Altran Concept Tech GmbH

Dr. Johann Hoffelner Linz Center of Mechatronics GmbH

Dr. Alexander Rager Innovation Manager at BMW Group

Dr. Michael Jerabek Borealis Linz

Dr. Robin Steinberger Hirtenberger Group

Dr. Sebastian Heimbs Airbus

Christian Walch Voestalpine Stahl GmbH

2

Start Finish

16:00 18:00

17:00 Committee Meeting

Start Finish

08:00 09:00

Impact of Materials on Society

10:30 11:00

11:00 13:00

Start Finish Impact Experiments (Bibliothek) Impact Applications (Prunksaal)

Experimental Investigation of Polypropylene

Compounds for Instrumented Puncture Tests

Controlled Electrical Discharge Impulse

Crushing System for Lifesaving Operations in

Earthquake Disasters

Florian KIEHAS, Michael JERABEK, and

Zoltán MAJOR

Takashi FUKUDA, Satadru Das ADHIKARY,

Kazunori FUJIKAKE, Katsuya SASAKI, and

Mikio TANAKA

Data Processing for Projectile Rigid

Acceleration with Ensemble Empirical Mode

Decomposition

Development of Flexible Shin Guards for

Football Using Strain Rate Dependent

Material

Gang CHEN, Lin TANG and Hao WU Masahiro HIGUCHI, Takahiko NAKAMOTO,

and Hiroshi TACHIYA

Coffee

Session A

11:00 11:20

11:20 11:40

Prof. Tadaharu Adachi, Toyohashi University of Technology, Department of

Mechanical Engineering, Representative of the Committee on Impact of the Society

of Materials Science, Japan

09:20 09:50

Opening Speech (Johann Orth Saal)

Prof. Reinhold W. Lang, Institute of Polymeric Materials and Testing, JKU, Linz,

Austria

09:50 10:30

Plenary Talk 1 (Johann Orth Saal)

Do We Understand Behavior of Polymers at High Excitation Rates/Frequencies?

Unresolved Facts and Open Questions

Igor EMRI, University of Ljubljana, Slovenia

Monday, 01 July 2019

Shuttle from train station Attnang (16:00, 17:00, 18:00) - please book the shuttle

with travelling time via email (isie2019@jku.at), if you want to use it

Tuesday, 02 July 2019

Registration and Coffee

09:00 09:20

Opening Ceremony (Johann Orth Saal)

Prof. Zoltan Major, Institute of Polymer Product Engineering, JKU, Linz, Austria

Prof. Erich Peter Klement, Johannes Kepler University, Linz, Austria

Stefan Krapf, Mayor of the town of Gmunden

3

An Experimental Investigation of Dynamic

Splitting Tensile Tests on Concrete Using

Digital Image Correlation

Dynamic Compression Property of Distilled

Water Ice and Impure Water Ice at High

Strain Rates

Yingqian FU, Jipeng XU, Xinlu YU, Xinlong

DONG, Fenghua ZHOU

Shangkun LI, Xiaowei FENG, and Ruoze XIE

A Study on Change in Temperature of Pure

Aluminum During Impact Compressive Test

by a Miniature Split Hopkinson Pressure Bar

Technique

Influence of Moisture on Impact Response of

Ropes

Chong GAO, Takeshi IWAMOTO Anatolij NIKONOV and Igor EMRI

Temperature Rise and Adiabatic Shear

Localization: An Experimental Examination

An Approach to Vehicle Crash Simulation of

Laminated CFRP Components using LS-

DYNA

Yazhou GUO, Qichao RUAN, Shengxin

ZHU, Haosen CHEN, Qiuming WEI, and

Yulong LI

Masato NISHI, Tsuyoshi NISHIHARA, Bo

REN, Kei SAITO, Chikara KAWAMURA, and

Shunsuke KANEMOTO

Real-Time Observation of Stress-Wave

Propagation and Hypervelocity-Impact-

Damage Formation in Transparent Material Failure Criteria for SFRT and LFRT

Nobuaki KAWAI, Mikio NAGANO, Sunao

HASEGAWA, and Eiichi SATO

Peter REITHOFER, Benjamin

HIRSCHMANN, Stefan KOLLING, and Jens

SCHNEIDER

13:00 14:00

14:00 16:00

Start Finish Impact Experiments (Bibliothek) Impact Applications (Prunksaal)

A New Method to Lengthen the Duration of a

Tensile Wave Using Extended Rods with

Impedance Matching

Mechanical Properties and Failure Behavior

of Resistance Spot Welds of Hot-Stamped

Automotive Steel

Hideroshi KOBAYASHI, Kinya OGAWA, Kin-

ichi TANIGAKI, and Keitaro HORIKAWA

Alireza MOHAMADIZADEH, Elliot BIRO, and

Michael WORSWICK

Crushing Behaviour of a Multi-Layered

Kirigami Structure Under Different Loading

Rates

Pressure Wave Propagation During

Projectile Penetration into Sand

Zhejian LI, Wensu CHEN, and Hong HAO Kazuhiro TANABE, Takahiro ONODERA,

Kohei TATEYAMA, and Keiko WATANABE

Numerical and Experimental Study on the

Shaped Charge Jet Penetration into

Concrete for Mining Applications

Strain Rate Dependence of a Cell Wall

Material of Aluminum Foams

M. MAGIER, P. ŻOCHOWSKI, W. BURIAN,

M. PYTLIK, J. KULASA, B. JUSZCZYK

Kenichi TANIGAKI, Keitaro HORIKAWA, and

Hidetoshi KOBAYASHI

14:40 15:00

Lunch

Session B

14:00 14:20

14:20 14:40

12:20 12:40

12:40 13:00

11:40 12:00

12:00 12:20

4

Experimental Research on the Shaped

Charge Jet Penetration into Concrete in the

Mine Conditions

Compressive Properties of a Foamed

Polyethylene Film with Cell Shape Anisotropy

M. MAGIER, W. BURIAN, J. KULASA, M.

ZIELENKIEWICZ, M. PYTLIK, M. SZASTOK,

R. HILDEBRANDT, B. JUSZCZYK

Kohei TATEYAMA, Hiroyuki YAMADA, and

Nagahisa OGASAWARA

Failure Mechanisms of RT-PMMAs under

Impact-on-Edge Loading

Behavior of Double-Skin Steel Tubular (DST)

Members with Ultra-High Performance

Concrete (UHPC) Under Lateral Impact

Loading

Norazrina MAT JALI, Patrice LONGERE Weiqiang WANG, Chengqing WU

Dynamic Behaviour of 3D Printed Auxetic

Structures Investigated using SHPB

Mechanical Behaviour of Composite-Metal

Hybrids under Dynamic Three-Point Bending

Ondřej Jiroušek, Tomáš Fíla, Petr Zlámal,

Jan Falta, Marcel Adorna and Michaela

Neuhäuserová

Zohreh ASAEE, John MONTESANO, and

Michael WORSWICK

16:20 18:00

Start Finish Impact Experiments (Bibliothek) Impact Simulation (Prunksaal)

Propagation Characteristic of Pressure Wave

Induced by Impact in MR Fluids

Thermo-Mechanical Response of Polymers

Under Multiaxial Impact Loading

Yuya MITANI, Takuyoh HAGI, Kohei

TATEYAMA, and Keiko WATANABE

Juan Pablo TORRES, Michael JERABEK,

Simon GASTL, Zoltan MAJOR

Behavior of High-Velocity Oblique Impact for

the Metal Plates

A Dynamic Cavity-Expansion Penetration

Model For Elastic-Cracked-Crushed

Response of Reinforced-Concrete Targets

Akihisa MORI, Ryohei UENO, Shigeru

TANAKA, and Kazuyuki HOKAMOTO

Yongjun DENG, Xiaowei CHEN

Impact Test of a Typical Japanese Railway

Vehicle Structure against a Rigid Wall for

Validating a Numerical Simulation

Features of Numerical Modelling of

Protective Components of Structures Under

Shock Loads

Tomohiro OKINO, Keisuke NAGATA,

Hiroyuki SATO, Keitaro HORIKAWA, and

Hidetoshi KOBAYASHI

Leopold KRUSZKA, Yurii S. VOROBIOV,

Natalii Yu. OVCHAROVA, and Tetiana Yu.

BERLIZOVA

16:40 17:00

17:00 17:20

16:00 16:20 Coffee

Session C

16:20 16:40

15:20 15:40

15:40 16:00

15:00 15:20

5

Material Models for Thermoplastics in LS-

DYNA from Deformation to Failure

Numerical Investigation of Temperature Rise

Near Crack-Tip in Steel Plate During Brittle

Crack Propagation

Peter REITHOFER, Benjamin

HIRSCHMANN, and Tobias SCHAFFRANEK

Yasuhito TAKASHIMA, Tomoya

KAWABATA, and Fumiyoshi MINAMI

Numerical Simulation on The Impact Fracture

of a Glass Plate Stuck With a Polymeric Film

Kojima TOMOHISA, Suzuki MASAHIRO, and

Notomi MITSUO

18:00 20:00

Start Finish

08:00 08:30

09:50 10:20

10:20 12:00

Start Finish Polymers and Elastomers (Bibliothek) Composites (Prunksaal)

Measuring Penetration Strength of Rubber

Plate under Lateral Pressure based on

Electromagnetic Induction Phenomena

The Loading Rate Effect on the Interfacial

Properties of Nano-Silica Reinforced Carbon

Fiber Composite

Tadaharu ADACHI, Keita IGARI, and Yosuke

ISHII

Zhenbiao HU, Tao SUO, Qiong DENG,

Mingwei CHEN, Yulong LI

Session D

10:20 10:40

09:10 09:50

Plenary Talk 3 (Johann Orth Saal)

Feasibility Study on Electric Arc Furnace Steel Sheet for Automotive Structure

Masaaki ITABASHI, Suwa University of Science, Japan

Coffee

Coffee

08:30 09:10

Plenary Talk 2 (Johann Orth Saal)

Underwater Explosive Welding; Introduction of the Method, Advantages and

Possible Applications

Kazuyuki HOKAMOTO, Kumamoto University, Japan

18:00 18:00 Break

Dinner

Wednesday, 03 July 2019

17:20 17:40

17:40 18:00

6

Dynamic Mechanical Properties of

Thermoplastic Polyurethane used in Sealing

Applications at High Strain Rates

Experimental Characterization of Mode II

Interlaminar Fracture Behavior in Zanchor

Reinforced Composite Laminates under

Impact Loading

Umut ÇAKMAK, Günter AMON, Christian

GUTNIK, and Zoltan MAJOR

Takayuki KUSAKA, Naoki MORI, Wataru

SUGIMOTO, Hironobu TAKAGI, Toshifumi

FUJII, and Yasuhiko IWASAKI

Dynamic Mechanical Properties of Flexible

Polydimethylsiloxane Subjected to Impact

Loading

The Dynamic Behavior of a Sandwich

Structure with Layered Graded Cellular

Metallic Cores

Fuxing MIAO, Shanen LI, Huanyu CHEN,

Fenghua ZHOU

Shiqiang LI, Zhihua WANG, and Zhifang LIU

Dynamic Properties of O-Ring Components

and Its Reproducibility

Composite Platelets – Laboratory and

Numerical Investigation about Energy

Dissipation

Tadayoshi SHOYAMA, and Koji FUJIMOTO Pawel PLATEK, Michal GRAZKA, Bartosz

FIKUS

11:40 12:00

12:00 13:00

14:00 20:30

14:00

14:45

16:00

17:30

18:00

20:00 20:30

Start Finish

08:00 08:30

10:30 11:00 Coffee

09:10 09:50

Plenary Talk 5 (Johann Orth Saal)

Prediction of Fracture and Crack Propagation of High-strength Steels using

Isogeometric Analysis and Local Anisotropic r-value

Kenji TAKADA, Honda R&D Co., Ltd.

Coffee

08:30 09:10

Plenary Talk 4 (Johann Orth Saal)

Experimental Characterization of Dynamic Nonlinear Response of Materials

Krishnaswamy RAVI-CHANDAR, University of Texas at Austin

Kaiser-Villa (Sissi)

City Tour

Departure towards Ebensee

Dinner at Ebensee

Return to Toscana Congress

Thursday, 04 July 2019

Lunch

Excursion to Bad Ischl

Departure from Toscana Congress

11:00 11:20

11:20 11:40

10:40 11:00

7

11:00 13:00

Start Finish Battery Housings + Steel (Bibliothek)Additive Manufacturing and

Lattice Structures (Prunksaal)

Development of a Modular Toolbox for HV

Battery Housings

Investigation of Mechanical Energy

Absorption Hollow Sphere Structures

Manufactured by Selective Laser Sintering

Andrea TUKSA, Gernot TRATTNIG Kamil CIEPLAK, Jacek JANISZEWSKI,

Tomasz MAJEWSKI

Simulations and Crash Tests of Novel Urban

Electric Vehicle with High Strength Steel

Structure and Self-Supporting Battery Casing

(Steel S4 EV)

The Influence of Cellular Structure on the

Shock Response of a Micro-Architectured

Lattice

Maria Teresa FERNANDEZ PEÑA, Esteban

CAÑIBANO ÁLVAREZ, Javier ROMO

GARCÍA, Javier SANZ LÓPEZ

Matthew COTTON, Nick GIBBS, and Ernie

HARRIS

Mechanical and Microstructural Evaluation of

High Performance Steel (S700MC) under

Dynamic Load on Road Restrain Systems

Dynamic Compression of 3D Printed Metallic

Mesostructures with In-Situ X-Ray Imaging

Esa VUORINEN, Nazanin HOSSEINI, Ali

HEDAYATI, Eva KORNACKER, Maria

Teresa FERNANDEZ, Javier SANZ, Manuel

I. GONZALEZ, Esteban CAÑIBANO, and

Alberto DE PRADO

Martin JÄCKLEIN, Konstantin KAPPE, Aron

PFAFF, Marius BIERDEL, Klaus HOSCHKE,

Matthias WICKERT, Werner RIEDEL, Jacob

FORSTER, Daniel EAKINS, Emilio

ESCAURIZA, Liam SMITH, Alexander RACK

Influence of Crash Box Design (Flange

Trigger, Hat Welding) on Axial Crash

Foldability of Advanced High Strength Steels

Instrumented Charpy Impact Tests of

Additively Manufactured Specimens

Patrick LAROUR Veronika M. MIRON, Gerhard BRÄUER,

Sebastian LÄMMERMANN, Zoltán MAJOR

Mechanical Response of Laser-Welded Butt

Joints with High Strength Steel under Tensile

SHPB Condition

Novel Additively-Manufactured Polymeric

Lattice Structures for Impact Absorption

Paweł PROCHENKA, Jacek JANISZEWSKI Z.P. SUN, Y.B. GUO, G.F. GAO and V.P.W.

SHIM

C-SMC Crashworthiness for Automotive

Battery Case Application

Dynamic Response and Failure Mechanism

of Additively-Manufactured Functionally

Graded Ti-6Al-4V Micro-Lattice Structures

Federico COREN, Philipp S. STELZER,

Zoltán MAJOR, and Peter FISCHER

Lijun XIAO, Weidong SONG

13:00 14:00 Lunch

12:20 12:40

12:40 13:00

11:40 12:00

12:00 12:20

Session E

11:00 11:20

11:20 11:40

8

14:00 16:00

Start Finish Impact Experiments (Bibliothek) Impact Fracture (Prunksaal)

Fragment Mass Distribution Generated by

Multiple Branching of Fast Propagating Crack

in PMMA Plate Specimen

Towards Consistent Parameter Identification

Tests for Damage Model Calibration of Sheet

Metal

Shinichi SUZUKI, Tomoya MURAKAMI, and

Tsubasa TAKAGI

Leopold WAGNER

Deformation Modes and Corresponding

Critical Impact Velocities of Aluminum

Honeycombs under Dynamic Crushing

Study on Fracture Behavior of Exploded TA2

Alloy Cylinders with Varied Charge

Peng WANG, Jun ZHANG, and Yongjian

MAO

Xinlong DONG, Fuyou YU, Xinlu YU

Dynamic Testing Technique Based on Multi-

Channel Photonic Doppler Velocimetry for

Investigating the Dynamic Behavior of

Materials

Strain Rate Dependent In-Situ Micro Damage

Analysis

Y.G. WANG, Y.Y DING, and J. LIU Jörg LIENHARD, Frank HUBERTH

Experimental Research on Craters Formation

of 93 Tungsten on a Semi-Infinite Target of

Granite by Hypervelocity Impact

Fracture of a Special Rocket Structure under

Impact Loads

Wei WANG, Defeng KONG, Xiaofeng

WANG, Biao WU

Leopold KRUSZKA, Marina

CHERNOBRYVKO, Boris USPENSKY,

Konstantin AVRAMOV, Anatoliy

TONKONOGENKO, Hennadii

MARTYNENKO, Nataliia SAKHNO, Vladimir

MARTYNENKO, and Yurii MESHA

Analysis of Lateral Tensile Stress in Elastic

Rod During the Taylor Impact

Hongsheng YANG, Yulong LI, Shiyang WEI,

Fenghua ZHOU

15:40 16:00 Coffee

15:20 15:40

14:40 15:00

15:00 15:20

Session F

14:00 14:20

14:20 14:40

9

16:00 17:50

Start Finish Impact Experiments (Bibliothek) Impact Simulation (Prunksaal)

Strain-Rate Dependent Dynamic Tensile

Properties of Shape-Memory-Alloy

Impact Fracture Simulation of BMG Based on

Free Volume Model

Xihong ZHANG, Hong HAO Tsutomu UMEDA and Koji MIMURA

Failure Front Propagations in Taylor Impact

of Quartz Glass Bars

Experimental Study on Dynamic Tensile

Properties of Concrete Bar Based on Digital

Image Correlation and Full-Field Lagrange

Inverse Analysis

Yuxuan ZHENG, Xun XIONG, Fenghua

ZHOU, and liming YANG

Xinlu YU, Jipeng Xu, Yingqian Fu, Xinlong

Dong, Fenghua Zhou, and Yuanyuan DING

Measurement of Impact Deformation in Ice

Using Percussion Test

Numerical Simulation of Deformation and

Failure of Bolts Subjected to Shear Impact

Loads

Yuki NAKAO, Hiroyuki YAMADA, Hiroyuki

FUJIWARA, and Nagahisa OGASAWARA

Deng ZHIFANG, Xie RUOZE, Yan YIXIA,

and Chen CHENGJUN

Numerical Study on the Behavior of the

Human Body under Ballistic Impact

Pawel ŻOCHOWSKI

19:00

22:00 Karaoke

Start Finish

09:00 12:00

12:30 14:30

Friday, 05 July 2019

Optional work group meetings / Committee Meeting / publication strategy

Shuttle to Attnang train station (12:30, 13:30, 14:30) - please book the shuttle with

travelling time via email (isie2019@jku.at), if you want to use it

Closing Ceremony (Johann Orth Saal)

Gala Dinner

17:00 17:20

17:20 17:40

16:20 16:40

16:40 17:00

Session G

16:00 16:20

10

Sponsors