. Tel: +86-760-85318111 Fax: +86-760-85594662 : +86-760-85318111 :
+86-760-85594662 www.tycc.cn Email:
[email protected]
www.tycc.cn :
[email protected]
This publication is issued to provide information only and is not
to form part of any order or contract.
.
Tongyu reserves the right to change specifications without prior
notice.
.
TA1013-0002-111100734324
09A-1
Installation Kit Material Hot-dip galvanized
steelQ235
All screws and nuts Stainless steel
Installation Kit Pictrue
Screw size Torque (Nm)
M8 18
M10 25
M12 32
(1PCS)
NOTE/
1, Only qualified personnel are allowed to install the antenna. 2,
Appearance of the actual antenna may differ from the
pictures.
1, 2,
13mm (2 PCS)
18mm (2 PCS)
Recommended torque see
Table 1/ 1
Screws size/ Torque/
M8 18 Nm
M12 32 Nm
Make sure the antenna is installed in a safe and suitable location
and well clear away from high power lines
Do not attempt to carry out installation when it is raining,
snowing or during stormy weather
Do not attempt to install the antenna on a pole of diameter other
than the specified 50 115mm
50115mm
www.tycc.cn