103552090 Instruction Manual for RTN 950

HUAWEI TECHNOLOGIES CO., LTD. Page 1

Configuring RTN 950 Series for

Smart POC and FTK project

(Instruction Manual)

HUAWEI TECHNOLOGIES CO., LTD.

www.huawei.com


1. Setting of IP address on your Laptop

1.1 Right Click on

icon of Local Area

Connection (LAN)

1.2 Click on Properties

1.3 Go to Internet

Protocol (TCP/IP)

then click

Properties


1.4 Type in IP Address then click on OK

ALWAYS USE THE FOLLOWING:

IP Address: 129.9.0.99

Subnet mask: 255.255.0.0

(No need to filed-up the Default gateway

and DNS)


2. Open the U2000 Web LCT application (pre-installed)

3. Type in your user name and password to Login

User Name: admin

Password: admin


4. To Search for a NE (Network Element), click NE Search

4.1 Click on NE SEARCH first

before you Add NE


4.2 Click on

SEARCH

Note: Domain is

automatically set

(no need to input


Web LCT will search and detect available NEs

4.3 Available NE will appear

4.4 Click Add NE


4.6 After pressing OK, all

available NE will be added on

the screen (Communication

Status will be NORMAL)

4.5 Then click on OK


5. To Login into the NE

5.1 Highlight the NE you want to login

5.2 Click on NE Login


5.3 Enter Password: password

5.4 Then press Apply and OK


6. To configure the NE, check if the Login Status then click on NE Explorer

6.1 Highlight the NE you want to

configure

Status will be already Logged in

6.2 Click on NE Explorer


7. Web LCT will automatically detect the available board/card on the Slot Layout

(with color ) 8. To install the cards, right click on the board then pressed “ADD”

Note: PIU, FAN and

CSH card will

automatically running

installed. Also slot 23

and 25 for ODU will

not detect until you

finished add the IFU2

boards.

8.1 Click add Physical

Boards


8.2 After you add all the

physical boards, slot 23

and 25 for ODU board

will appear.

8.3 Right click

the ODU board

then click the

add physical

board


9. Configuring NE attribute Site Name and Modifying NE

9.1 Highlight NE name

9.2 Highlight

NE attributes

9.3 Double click box under

NAME and type SITE NAME.

Then click apply and query.


9.4 Click Modify NE ID and a

dialog box will appear.

9.5 Type Site ID based on plan

assigned by TNP. Then click OK

NOTE: ID is a unique number.


10. Configuring 1+1 Protection


10.2 Highlight Link

Configuration

10.3 Click IF 1+1

Protection

10.4 Click New


Working Mode : HSB

Revertive Mode : Revertive

WTR : 300

Enable Reverse Switching :

Disable

Working Board : 3-IFU2-1

Protection Board : 5-IFU2-1

10.5 Click ok


11. Configuring Hybrid/AM configuration

11.1 Highlight 3-IFU2

11.2 Highlight

Hybrid/AM

Configuration

11.3 Click Hybrid/AM

Configuration


11.4 Double Click the

box of IF Channel

Band and change the

band according to the

plan

11.5 Double Click the

box of Manually

Specified Module and

change the module

according to the plan

11.6 Double Click the box

of E1 Capacity and change

the capacity according to

the plan

11.7 Click Apply then

Query


12. Configuring Transmit Frequency and Transmit Power

12.4 Click apply then

query

12.3 Double click the

box of transmit

frequency and type the

frequency according to

link budget given by

TNP

12.2 Highlight ODU

interface

12. 1 Highlight 23-ODU


12.5 click the

power

attributes

12.6 Double click the box of transmit power and

type the power according to link budget given by

TNP 12.7 Click apply

and query


13. Configuring Cross-Connection


13.2 Highlight cross connection

configuration

13.3 Click New



Thank You

www.huawei.com

Documents

103552090 Instruction Manual for RTN 950