Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
REPORT
For
Acura Embedded Systems Inc.
Unit # 1, 7711-128 Street Surrey, British Columbia,
V3W 4E6, Canada
Date: August 8, 2011 Report No.: 10052-1S Revision No.: 0 Project No.: 10052 Equipment: Mobile Computer System Part/Model No.: PowerBrick / AcuBrite Series
ONE STOP GLOBAL CERTIFICATION SOLUTIONS
3133-20800 Westminster Hwy, Richmond, BC
V6V 2W3, Canada Phone: 604-247-0444
Fax: 604-247-0442 www.labtestcert.com
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 2 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
TABLE OF CONTENTS
TEST REPORT ........................................................................................................................................................ 3 Summary of Testing: ................................................................................................................................................ 6 Test Equipment Used ............................................................................................................................................... 7 Photos ...................................................................................................................................................................... 8 Appendix A – Test Data Section ............................................................................................................................ 11 Appendix B – ISO 17025:2005 Accreditation Certificate ....................................................................................... 18
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 3 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
TEST REPORT
Report reference No. ...................... : 10052-1S
Report Revision History: Rev_0: Issued August 8, 2011
Compiled by (printed name and signature) .......... :
Eugen Rapa
Approved by (printed name and signature) .......... :
Sandeep Bhayana
Date of issue .................................... : August 8, 2011 Note: By signing this report, both the Testing Technician and the Reviewer hereby declare to abide by the applicable LabTest policies: 1.) Statement of Independence # 3014 (LabTest Employees), 2.) Independence, Impartiality, and Integrity #1039, clause 11 (Engineering Service Subcontractors), or
3. ) Independence, Impartiality, and Integrity #1019, clause 3.5 (Testing Subcontractors).
Testing Laboratory Name ............. : LabTest Certification Inc.
Address ........................................... : 3133 – 20800 Westminster Hwy, Richmond, B.C. V6V 2W3
Test Location Name ..................... : Powertech Labs Inc.
Address ............................................ : 12388 - 88 Avenue Surrey, British Columbia, Canada, V3W 7R7
Applicant's Name .......................... : Acura Embedded Systems Inc.
Address ........................................... : Unit # 1, 7711-128 Street, Surrey, British Columbia, V3W 4E6
Test specification
Test Procedure ................................. : MIL-STD-810F- Figure 514.5C-1 U.S Highway truck
vibration exposure vertical.
Copyright 2003 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader’s interpretation of the reproduced material due to its placement and context.
Test item description .................... : Mobile Computer System
Manufacturer ................................... : Acura Embedded Systems Inc.
Model and/or type reference ........... : Model: AcuBrite-15, Model: PowerBrick™, Model: AcuConnect, Model: PowerBrickAtom™.
Serial/Sample numbers ................... : S/N: P1568ETAV10470094, S/N: ACPB311007008, Sample number: 882735, S/N: AC11ATOM0102
Particulars: test item vs. test requirements
Test case verdicts
Test case does not apply to the test object ..................................................
(N)/A
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 4 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Test item does meet the requirement .............................................................
(F)ail
Test item does not meet the requirement ........................................
(P)ass
Testing
Date of receipt of test item ................. July 2, 2011
Date(s) of performance of test ........... July 4-6, 2011
Appendix A: Test Data
General remarks
”This report is not valid as a CB Test Report unless appended by an approved CB Testing Laboratory and appended to a CB Test Certificate.
The test result presented in this report relate only to the object(s) tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
”(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report.
Throughout this report a comma is used as the decimal separator.
Throughout this report a period is used as the decimal separator.
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 5 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
List of Tested Items
Item No. Model No. Serial/Sample No.
1 AcuBrite-15 P1568ETAV10470094
2 PowerBrick™ ACPB311007008
3 AcuConnect 882735
4 PowerBrickAtom™ AC11ATOM0102
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 6 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Summary of Testing:
Test No. TEST VERDICT
1 Random Vibration Test Frequency Range Control Variable 10 - 40Hz 0.015 g2/hz spectral density 500Hz 0.00015 g2/hz spectral density Duration: 90 minutes per axis
Test conducted in all 3 axes. Unit was operational during testing.
P
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 7 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Test Equipment Used
Item Type Equipment
No
Calibration date Calibration Certificate
No
Calibration Laboratory Last Due
1 Unholtz-Dickie SAI30F-R16C-3
1 __ __ __ __
2 Dactron Laser Vibration Controller
1670 May 2, 2011 May 2, 1012 __ Powertech
Labs
3 PCB 353 B34 Control Accelerometer
0926 August 12, 2010 August 12,
2011 __
Powertech Labs
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 8 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Photos
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 9 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 10 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 11 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Appendix A – Test Data Section
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 12 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 13 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 14 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 15 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 16 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 17 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 18 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Appendix B – ISO 17025:2005 Accreditation Certificate
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 19 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 20 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0
Page 21 of 21
This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.
DCN: 1012, Rev 5
END OF REPORT