E U R O P E A N S T E E L A N D A L L O Y G R A D E S

s t e e l n u m b e r . c o m

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us

YOU HERE: Steel numbers -> Number 1.00XX OR Steel and cast iron standards -> / EN 10250-2

S235JRG2 ( 1.0038 )

Grade : S235JRG2

Number: 1.0038

Standard: EN 10250 - 2 : 2000 Open steel die forgings for general engineering purposes. Non-alloy quality andspecial steels

Classification: ??? According EN 10025-2 steel number 1.0038 named S235JR ???

Equivalent grades: Go here

Che mic al com pos ition % of gr ade S23 5JRG2 (1.003 8)

For forgings with an equivalent diameter or thickness > 100 mm the carbon content shall be agreed beetween purchaser andsupplier.

C Si Mn Ni P S Cr Mo Al -

max 0.2 max 0.55 max 1.4 max 0.3 max 0.045 max 0.045 max 0.3 max 0.08 min 0.02 Cr+Mo+Ni < 0.48

M ech anical pr ope rti es of gra de S 235 JRG2 (1 .00 38)

Nominal thickness (mm): to 100 100 - 250 250 - 500

Rm - Tensile strength (MPa) (+N) 340 340 340

Nominal thickness(mm): to 100 100 - 250 250 - 500

Re - Upper yield strength (MPa) (+N) 215 175 165

Nominal thickness (mm): to 100 100 - 250 250 - 500

A - Min. elongation at fracture (%) longitud., (+N) 24 23 23

A - Min. elongation at fracture (%) transverse, (+N) 17

Eq uivale nt gra des of gr ade S23 5JRG2 (1.0 038 )Warning! Only for reference

USA-

GermanyDIN,WNr

JapanJIS

FranceAFNOR

EnglandBS

EuropeanoldEN

ItalyUNI

SpainUNE

ChinaGB

SwedenSS

PolandPN

CzechiaCSN

FinlandSFS

AustriaONORM

RussiaGOST

InterISO

► Steel Pipe ► Tool Steel ► Steel Plate ► Stainless Steel

Carbon Steel Pipe & Tubewww.fedsteel.com

Thick Wall for High Temp / Pressure Alloy & Carbon in all major spec

Gr.36 RSt37-2S235JRG2

SS330 E24-

2NE

40B Fe360BFN S235JRG2 AE235B-

FN

Q235C 1312-

00

St3S 11375 Fe37B RSt360B St3psSt3sp

Fe360B

Me cha nic al pro per tie s

Me cha nis che Eigen sch aft enCar act er i stique s m eca niq ues

ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale

Rm Tensile strength / Zugfestigkeit / Resistance a la traction

A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal

J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Heat tr eat men t c ond itions

+A Soft annealed

+AC Annealed to achieve spheroidization of the carbides

+AR As rolled

+AT Solution annealed

+C Cold drawn / hard

+CR Cold rolled

+FP Treated to ferrite-pearlite structure and hardness range

+I Isothermal annealing

+LC Cold drawn / soft

+M Thermo mechanical rolling

+N Normalized

+NT Normalized and tempered

+P Precipitation hardened

+PE Peeled

+QA Air quenched and tempered

+QL Liquid quenched and tempered

+QT Quenched and tempered

+S Treated to improve shearability

+SH As rolled and turned

+SR Cold drawn and stress relieved

+T Tempered

+TH Treated to hardness range

+WW Warm worked

+U Untreated

Chemical composition of S235JRG2 (1.0038). Equivalent grades of S235JRG2 (1.0038). Standards of S235JRG2 (1.0038).Properties of S235JRG2 (1.0038). Hardness of S235JRG2 (1.0038). Strength of S235JRG2 (1.0038). Elongation of S235JRG2 (1.0038).

© 2011- 2013 All rights reserved. The contents from this site may not be reproduced. The entire risk as to use of these content is assumed by you the user