2

Click here to load reader

100 1000 Fiber Ethernet Media Converter

Embed Size (px)

Citation preview

  • F i b e r O p t i c S o l u t i o n s 1/2

    www.suntelecommunication.cn +86-21-54481280 [email protected]

    10/100/1000M Fiber Ethernet Media Converter

    SUN Telecoms Fiber Ethernet Media Converter supports full duplex and half duplex mode, beside this; it supports IEEE802.3 10Base-T standard, IEEE 802.3u 100Base-Tx/Fx standard as well as IEEE

    802.3z 1000Base-Tx/Fx Standard.

    Features: z In conformity to IEEE 802.3 10Base-T, IEEE 802.3u 100Base-Tx/Fx, IEEE 802.3z 1000Base-Tx/Fx

    standard

    z Max. 2M buffer memory built in chip z Data flow control for full duplex IEEE802.3 X and half duplex z Automatic identification of MDI/MDI-X cross line z High-performance, 1.4Gbps memory bandwidth z In conformity to safety code of FCC and 15 CLASS B

    Product Sketch Map:

    Figure 1 Front panel for single fiber media converter

    Figure 2 Front panel for dual fiber media converter

  • F i b e r O p t i c S o l u t i o n s 2/2

    www.suntelecommunication.cn +86-21-54481280 [email protected]

    Specifications:

    Standard IEEE 802.3 10Base-T Standard

    IEEE 802.3u 100Base-Tx/Fx Standard

    IEEE 802.3z 1000Base-Tx/Fx Standard

    Connector 1 UTP RJ-45, 1 SC/ST Connector

    Fiber Cable (um) Single-mode: 8.3/125, 8.7.125, 9/125, or 10/125

    Multimode: 50/125. 62.5/125 or 100/140

    Operation Mode Full duplex mode or half duplex mode

    Max. Distance UTP: 100 meters (Cat 5.);

    Fiber: 2,000meters (Multi-mode) 20km ~ 120km(Single Mode)

    Power Supply External: DC 5V 2A

    Built-in: AC 110 ~ 265V or DC -48V

    Environmental Temp. (C) 0 ~ 60

    Humidity 5% ~ 90%RH

    Dimensions (mm) 95 x 70 x 26 (L x W x H) (External power supply)

    140 x 110 x 30 (L x W x H) (Internal power supply)

    Cautions:

    1. This product is suitable for indoor application.

    2. Put on the dust cover of fiber interface when not used.

    3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.

    4. Single optical fiber transceiver must be used in pair (See the attachment description in delivery).

    Note: For the necessity of improvement, the material contained in this document is subject to change without notice.