Upload
dothuan
View
236
Download
5
Embed Size (px)
Citation preview
10 -
PP
EHead ProtectionFace ProtectionHearing ProtectionRespiratoryEye ProtectionHand ProtectionProtective ClothingCooling ProductHealth, Safety & Environment EquipmentSun Protection
Safety SignsFirst Aid
254 - 299
WWW.BULLIVANTS.COM 255
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Head ProtectionThe wearing of adequate and appropriate head protection in the workplace is vital. For OHS stakeholders refer to AS/NZS 1801 which provides the basis for correct selection.Under the criteria of Australian Standards several factors need to be considered in relation to the life expectancy of a hard hat and its components.1) AS/NZS1801 states that safety caps and safety helmets have a recommended life of up to three years from the date of issue.2) The hard hat harness should, as best practice, be replaced every two years.3) Before using a hard hat always check for cracks, fading or abnormal wear, dull or chalky surface and brittleness. Replace immediately if any of these factors are present.4) Reduce exposure to extended heat and sunlight by storing in a bag or locker rather than a vehicle parcel shelf as this will assist with maintaining the integrity of the head protector.What Type of Head Protection Should Be Selected?Type 1 ABS Safety Cap - This is the most commonly worn head protection in construction and general industrial applications. It comes with or without a gutter for rain and chemical dust considerations.Type 2 Polycarbonate Safety Cap - in high heat environments.Bump Cap - Isn’t manufactured to AS/NZS1801 and generally used to protect against scrapes and minor knocks in domestic situations.Vented - Generally selected when ventilation to assist with cooling the head is required.Unvented - Is best used in areas where dust and chemical hazards exist.
Unvented Hard Hat: Unit of Measure - Each
• 6 point harness. • Lightweight. • Cotton sweatband prevents perspiration build-up. • Extended peak for added protection and an edge gutter
OR
DER
CO
DE
Col
our
44182585 White
44182586 Yellow
44182580 Blue
44182581 Fluoro Yellow
44182582 Green
44182583 Orange
44182584 Red
Accessories available.
Vented Hard Hat: Unit of Measure - Each
• 6 Point Harness System. • Air vents and cotton sweatband prevents perspiration build-up. • Extended peak for added protection and an edge gutter to
• Lightweight & extremely durable. • Chin strap also available.
OR
DER
CO
DE
Col
our
44182593 White
44182594 Yellow
44182588 Blue
44182589 Fluoro Yellow
44182590 Green
44182591 Orange
44182592 Red
Accessories available.
UniSafe Hard Hats: Unit of Measure - Each
OR
DER
CO
DE
Col
our
Type
Mod
el
44030000 White Unvented TA560WH
44030002 White Vented TA570WH
Miners Caps: Unit of Measure - Each
OR
DER
CO
DE
Type
Bra
cket
Typ
e
Mod
el
44033017 Unvented Metal TA560M
44033018 Unvented Plastic TA560M
Bullivants can brand hard hats with your company logo in different locations and in various colours on the hard hat. Please contact your nearest Bullivants branch.
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999256
Hard Hat Accessories: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
44032115 Adjustable Hard Hat Chin Strap
44200120 Cotton Sweat Band
44200870 Hard Hat Brow Guard
44110134
44110135
Hard Hat Brims: Unit of Measure - Each
• Cotton Wide Brim & Neck Flap.
OR
DER
CO
DE
Col
our
44032117 White
44032124 Navy
44032121 Orange
Plastic Brim With Neck Flap: Unit of Measure - Each
OR
DER
CO
DE
Col
our
44200937 Green
44201439 White
HatsCanvas Hat With Toggle: Unit of Measure - Each
OR
DER
CO
DE
Col
our
Size
Mod
el
4817543 Navy Large CSH
4817544 Navy X-Large CSH
Other colours & sizes available
Face Protection - Face Shields, Visors & BrowguardsHoneywell BIONIC®
Impact Protection: Unit of Measure - EachThe simplest and most comfortable face shield designed to handle any challenge. Revolutionary and designed for rugged jobs, it’s tough where it has to be, yet extremely lightweight and balanced for all day comfort. • Extended top of head & chin protection & adjustable headband. • Dielectric design will not conduct electricity. • Hard hat adaptor sold separately. Compatible with MSA V Guard Elite & Protector Tuff Master hard hats. • Shade 3 & Shade 5 visors available for welding. • Easy lens replacement. Lenses are interchangeable between clear, electric arc and shaded welding visors, making the Bionic an extremely versatile face shield.Technical Data • Weight: 360 grams. • Material: ABS frame with polycarbonate visor. • Impact Protection:High Impact & Splash Protection. • Approvals: AS/NZS 1337, Licence No: SMK 2209.
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200847 Bionic® face shield with clear uncoated visor 1011623
44201063 Bionic® replacement clear uncoated visor 1011625
44201069 Bionic® replacement clear hard coated visor 1011627
44201885 Bionic® replacement shade 3 uncoated visor 1011628
44201886 Bionic® replacement shade 5 uncoated visor 1011629
WWW.BULLIVANTS.COM 257
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Vadar Face Shield: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
Mod
el
44032026
Vadar assembled browguard & anti-fog visor. Ready assembled to be on
the task immediately.
BGVC
44200052 Replacement clear visor for face shield VC
44200053 Replacement smoke visor for face shield VS
Welding HelmetsBlack Lift Front Helmet: Unit of Measure - Each
Polypropylene shell. Features an adjustable headpiece, and
Sweatband and head harness are replaceable. Helmet AS/NZS1337 approved. Filter AS/NZS1338.1 approved.
OR
DER
CO
DE
Size
Mod
el
44200137 One Size Fits All WH01
OPTREL® e640: Unit of Measure - Each
The e640 allows the welder to select the desired shade level according to his requirements using the slide switch on the rear of the cartridge. It can be set to either DIN 10 or DIN 11. This classic helmet is extremely suitable for use in any applications requiring DIN4/10/11 functionality. The cartridge quality remains the same while the helmet shell is improved. • Darkens to Variable Shades 10 or 11 • Helmet design prevents front cover lens from being scratched when placed face down • Improved internal mounting mechanics means the ADF
• Select the shade level using a toggle switch inside the helmet • Replaceable front cover lens • Comfortable adjustable headgear with replaceable sweatband • Solar cells eliminate the need for battery changeTechnical Data • Weight: 460 grams • Impact Protection: High Impact & IR UV Protection. • Approvals: AS/NZS 1337 & 1338.
OR
DER
CO
DE
Des
crip
tion
Mod
el
44180038 OPTREL® e640 1006.400
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999258
Hearing ProtectionAs noise induced hearing loss cannot be cured or restored it must be prevented from happening. It is important that all protection provided is to AS/NZS 1270:2002.Personal hearing protection is usually available in two forms: earplugs and earmuffs.Earplugs are usually made of silicone or foam and are inserted into the ear canal. Plugs are best for people who work all day in noise and who have to wear other personal protection equipment such as hard hats, masks or goggles. Earmuffs completely enclose the ear and are held in place against the side of the head by a headband. They are designed to block the sound waves from reaching the inner ear, this process is called attenuation. The higher the attenuation the more noise is blocked from reaching the inner ear. As not all ears are the same it is important to choose a hearing protection solution that suits the working environment, the comfort of the worker and promotes user acceptance and wearablility. Earmuffs are easier to put on and remove so are more suited to people who are exposed to noise intermittently.Under AS/NZS 1270:2002, the class system is a simple way to select a hearing protector appropriate to a noise exposure. Once the extent of the noise hazard has been established the correct hearing protection can be applied by using a table such as that below.
Class SLC80 Range (dB)
For use in Noise Levels
1 10-13 < 90dB(A)
2 14-17 90 - <95
3 18-21 95 - <100
4 22-25 100 - <105
5 26 or greater 105 - <110
of 85dB over an 8 hour period.EarmuffsCare and Use of your Earmuffs: • For maximum noise reduction ears should be completely
• Cushions should be wiped clean at the end of each day. • Wash cushions and foam liners in warm soapy water at least once a week. • Cushions and cups should be checked for hardening and damage and replaced if necessary.
Howard Leight Mach™ 1 Earmuff: Unit of Measure - Pair
General purpose, over the head earmuff which features: • Broad ear cushions & spacious cups for all day comfort. • Dielectric design - no risk when working in high voltage areas.
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44200042 Mach 1 SLC80 22dB 4 11010421
Howard Leight Leightning® L1 Over-Head Earmuff: Unit of Measure - Each
The Leightning L1 earmuff features a steel wire construction and provides high performance and robust durability without compromising comfort. Leightning works well in extreme temperatures/humidity and under aggressive chemical
• Air Flow Control™ Technology provides better, consistent attenuation, especially at low frequencies • Optimal protection for virtually all noise frequency environments • Robust design withstands demanding use, especially in tough environments • Snap in ear cushions makes cushion replacement quick and easy • Padded foam headband delivers long wearing comfort • Minimal headband pressure on the head • Telescoping height adjustment for individual setting and
• SLC80 29dB Class 5
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44200177 L1 Over-Head 29dB 5 1010922
WWW.BULLIVANTS.COM 259
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Howard Leight Leightning® L1H Cap Mounted Earmuff: Unit of Measure - Each
The Leightning L1H cap mounted earmuff features a steel wire construction and provides high performance and robust durability without compromising comfort. Leightning works well in extreme temperatures/humidity and under aggressive
• Air Flow Control™ Technology provides better, consistent attenuation, especially at low frequencies • Optimal protection for virtually all noise frequency environments. • Robust design withstands demanding use especially in tough environments. • Snap in ear cushions makes cushion replacement quick and easy. • Padded foam headband delivers long wearing comfort. • Minimal headband pressure on the head. • Telescoping height adjustment for individual setting and
• For use with wide range of popular hard hats • Earcups snap-lock in place during use and can rotate back when not in use • Complete with hard hat adaptors in box - part #’s 1000244, 1000245 and 1000249. • SLC80 28dB Class 5
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44200178 L1H Cap Mounted 28dB 5 1012536
Howard Leight Leightning® L2F Folding Earmuff: Unit of Measure - Each
The Leightning L2 folding earmuff features a steel wire construction and provides high performance and robust durability without compromising comfort. Leightning works well in extreme temperatures/humidity and under aggressive
• Air Flow Control™ Technology provides better, consistent attenuation, especially at low frequencies. • Optimal protection for virtually all noise frequency environments. • Robust design withstands demanding use, especially in tough environments. • Snap in ear cushions makes cushion replacement quick and easy. • Padded foam headband delivers long wearing comfort. • Minimal headband pressure on the head. • Telescoping height adjustment for individual setting and
• Convenient folding design for easy storage. • Belt storage case available separately. • SLC80 30dB Class 5
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44200180 L2F Folding 30dB 5 1011997
Did you know that more than 3.5M Australians suffer hearing loss. For about 60% of those people industrial deafness is the major cause. Bullivants are able to supply a broad range of ear protectors to match the individual application and minimise the risk.
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999260
3M™ Peltor H7 Deluxe Series: Unit of Measure - Each
• Agriculture, construction, heavy industry and airports • Rated SLC80 30dB(A), Class 5 • AS/NZS 1270:2002 approved
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44182752 Over-the-head 5 H7A
44182753 Neckband 5 H7B
44182754 Folding Headband 5 H7F
44182755 Helmet Attachment (30mm blade) 5 H7P3E
44182756 Helmet Attachment (25mm blade) 5 H7P3G
3M™ Peltor H9 Mid Range Series: Unit of Measure - Each
• Workshops, automotive, schools, printing, textiles and lawn mowing • Rated SLC80 24dB(A), Class 4 • AS/NZS 1270:2002 approved
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44182758 Over-the-head 4 H9A
44182759 Neckband 4 H9B
44182760 Hard Hat Attachment 4 H9P3E
44182761 Hard Hat Attachment 4 H9P3G
3M™ Peltor H10 Extreme Performance Series: Unit of Measure - Each
• Headband – rated SLC80 33dB(A), Class 5 • Neckband – rated SLC80 34dB(A), Class 5 • AS/NZS 1270:2002 approved
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44182741 Over-the-head 5 H10A
44182742 Neckband 5 H10B
44182743 Hard Hat Attachment 5 H10P3E
44182744 Helmet Clip-on 5 H10P3G
EarplugsDisposable earplugs are made from compressible foam and are rolled to shape by the user prior to insertion into the ear canal. After the earplug is inserted the earplugs expand for a comfortable seal in the ear canal.You should follow the instructions provided with the
maintained correctly in the ear canal, and worn whilst in noisy environments.3M™ EAR Classic Platinum: Unit of Measure - Box 200
• High noise environments, for use in noise levels 100 to 105dB(A):Class 4 • Small design to suit smaller ear canals • Non-allergenic, non-irritating • High attenuation level • Self-adjusting PVC foam • Flame retardant • Rated SLC80 23dB(A), Class 4 • AS/NZS 1270:2002 approved
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44182697 Pillow Pack 4 310-4002
44030032 Poly Bag 4 310-4003
WWW.BULLIVANTS.COM 261
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Howard Leight Laser Lite®: Unit of Measure - Box 200
Laser Lite’s low pressure foam expands gently inside the ear canal for comfortable long-term wear, while it’s contoured T-shape delivers easy handling. Laser Lite’s high visibility magenta and yellow colours make compliance check easy and quick.Special features: • SLC80 25dB • Vibrant colours make protection visible and fun.
• Contoured T Shape for easy insertion and wear.
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
44030003 LL-1 Laserlite Ear Plug Uncorded 4 LL-1
44200423 LL-30 Laserlite Ear Plug Corded 4 LL-30
Howard Leight Max® Earplug
Max bell shape single-use earplug offers maximum in-ear comfort. • The world’s most used polyurethane earplug. • Bell shape delivers maximum comfort. • Improved design easier to insert, reduces tendency to back out of the ear. • Smooth, soil-resistant skin prevents dirt build-up. • Corded and uncorded versions available with various dispensing options. • SLC80 26dB Class 5
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
UO
M
44030005 MAX-1 Ear Plug Uncorded 5 Max-1 Box 200
44201443Max-1-D Uncorded LS-500A Dispenser 5 Max-1-D Box 500
44201883 Max-30 Ear Plug Corded 5 Max-30 Box 100
Howard Leight X-TREME® Earplug
Brightly coloured tapered earplug ensures compliance and encourages 100% wear time. • Brightly coloured offering high visibility and worker compliance • Smooth tapered shape for easy insertion and removal • Corded version helps to guard against earplugs falling
• Conveniently sized hand dispensing option for easy accessibility
whole work area • SLC80 26dB Class 5
OR
DER
CO
DE
Des
crip
tion
Cla
ss
Mod
el
UO
M
44030035 X-TREME Ear Plug Uncorded 5 XTR-1 Box 200
44030036 X-TREME Ear Plug Corded 5 XTR-30 Box 100
Howard Leight Leight® Source 400 Pair Earplug Dispenser: Unit of Measure - Each
LS-400A Leight Source Dispenser, a new versatile earplug dispenser.Special features: • Mounts to wall or stands as table top dispenser with balanced footing. • Twist knob to dispense earplugs. • Handy catch tray for stray plugs. • Ideal for smaller workshops, or where one or more dispensers are required. • Will suit: Max, X-TREME, Max Lite, Laser Lite, Multi Max, 300 Series.
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200429 400 Pair Earplug Dispenser LS-400A
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999262
RespiratoryMaking a DecisionChoosing respiratory protection involves many different issues and does require some background knowledge. In general a workplace assessment would need to be carried out for the correct equipment to be chosen.When carrying out the assessment the following would need to be taken into consideration: • Knowledge of the airborne contaminants in the workplace. • Knowledge of respiratory devices including correct storage
• Knowledge of the effects of facial hair on the seal
gas, dust or fumes • Knowledge of the Education process within the workplace, including written respiratory policyIt is essential to be understood that any paint or chemical formulation involving the release of free iso-cyanate during the reaction process always requires supplied air.3 RatingsP1 – This rating is designed for the collection of solids with an
of 80% (20% will pass through).P2 – This rating is designed for the collection of solids down to
through).P3 – This rating is designed for the collection of solids <0.3
through).When To Change The FilterWhen an accumulation of particles restricts air entry into the
will become an effort.At anytime that the wearer notices odour or taste then there has
Australian StandardsRespiratory equipment is governed by the following Australian Standards:AS1715 – selection, use and maintenance of respiratory protective devices – the User’s GuideAS1716 – Respiratory Protective Devices – The Manufacturers Guide
Disposable RespiratorsP1 Dust, Mist Respirator: Unit of Measure - Box of 20
• Provides protection against mechanically generated particles • Sawing, sanding, grinding and crushing • Foam rubber nose seal • Adjustable nose bridge for secure seal • Twin elastic bands • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44202070 ProSafe P1 Dust Respirator
P1 Valved Dust, Mist Respirator: Unit of Measure - Box of 10
• Provides protection against mechanically generated particles • Sawing, sanding, grinding and crushing • Foam rubber nose seal • Adjustable nose bridge for secure seal • Twin elastic bands • Exhalation valve increases comfort by assisting in expelling hot air • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44200982 ProSafe P1 Dust Respirator with ValveDid you know that under the wording of AS/NZS1716 it is not possible to achieve P3 respiratory protection by using a half face mask. The standards state that to achieve P3 level a
only be achieved with a full face mask or PAPR system. Bullivants work closely with our industry leading supply partners to provide solutions to our customers respiratory requirements.
WWW.BULLIVANTS.COM 263
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
P2 Dust, Mist, Fume Respirator: Unit of Measure - Box of 20
• Provides protection against mechanically generated particles • Foam rubber nose seal • Adjustable nose bridge for secure seal • Twin elastic bands • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44202128 ProSafe P2 Dust, Mist, Fume Respirator
P2 Valved Dust, Mist, Fume Respirator: Unit of Measure - Box of 10
• Provides protection against mechanically generated particles • Foam rubber nose seal • Adjustable nose bridge for secure seal • Twin elastic bands • Exhalation valve increases comfort by assisting in expelling hot air • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44200981 ProSafe P2 Dust, Mist, Fume Respirator with Valve
P1 Dust, Mist Flat Fold Respirator: Unit of Measure - Box of 20
• Provides protection against mechanically generated particles • Foam nose seal • Adjustable nosepiece for secure seal • Twin elastic headbands • Exhalation valve increases comfort by assisting in expelling hot air • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44202066 P1 Dust, Mist Respirator Flat Fold
P1 Valved Dust, Mist Flat Fold Respirator: Unit of Measure - Box of 20
• Provides protection against mechanically generated particles • Foam nose seal • Adjustable nosepiece for secure seal • Twin elastic headbands • Individually packaged for convenience and hygiene • Exhalation valve increases comfort by assisting in expelling hot air • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44202067 P1 Dust, Mist Respirator Flat Fold with Valve
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999264
P2 Dust, Mist, Fume Flat Fold Respirator: Unit of Measure - Box of 20
• Provides protection against mechanically generated particles • Foam nose seal • Adjustable nosepiece for secure seal • Twin elastic headbands • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44202068 P2 Dust, Mist Respirator Flat Fold
P2 Valved Dust, Mist, Fume Flat Fold Respirator: Unit of Measure - Box of 20
• Provides protection against mechanically generated particles • Foam nose seal • Adjustable nosepiece for secure seal • Twin elastic headbands • Individually packaged for convenience and hygiene • Exhalation valve increases comfort by assisting in expelling hot air • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44202069 P2 Dust, Mist Respirator Flat Fold with Valve
Respirators Half/Full Face & FiltersMoldex 8112A: Unit of Measure - Each
• For environments where spray paint, pesticides, degreaser, metal cleaning and adhesives are used • Soft, durable facepiece conforms to wearers face without pressure points providing long term comfort
• Extra wide surface stays sealed even when talking • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44070085 Moldex 8112A C/W A1/P2 Spray Paint/Pesticide Cartridges
Moldex 8602A: Unit of Measure - Each
• For environments where organic solvents, degreasers, the handling of acids are involved • Soft, durable facepiece conforms to wearers face without pressure points providing long term comfort
• Extra wide surface stays sealed even when talking • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44070086 Moldex 8602A C/W A1B1E1K1 plus formaldehyde Multi-Gas Smart® Cartridge
WWW.BULLIVANTS.COM 265
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Moldex 8752A: Unit of Measure - Each
• Suitable for most welding applications • Fits under most welding helmets
• Fibreglass free • AS/NZS 1716 P2 approved
OR
DER
CO
DE
Des
crip
tion
44070084 Moldex 8752A P2 Plus Nuisance Organic Vapours Ozone
Moldex 8000 Series Replacement Cartridges: Unit of Measure - Pair
• A1, A1B1E1K1, P2/P3 • Multi-Gas, Fumes, Mists, Vapours and Dust • Each cartridge comes with a new inhalation valve and has a snap in mount that eliminates cross threading • AS/NZS 1716 approved
OR
DER
CO
DE
Des
crip
tion
44070090 8030A Particulate P2/P3 Cartridge
44090091 8100A Organic Vapour A1 Cartridge
44070088 8600A Multi-Gas Smart® A1B1E1K1 Cartridge
Not to be used for 2-pac paint applications.
Eye ProtectionOur eyes are a precious and fragile asset which need protection from damage. It is vital that the correct type of safety eyewear is used and the product being provided in the workplace complies to AS1337:1992 which sets out the standards for eye protectors for industrial applications.It should be noted that if you are wearing eyewear which is marked as AS1067:2003 you will not receive any impact protection. This standard refers to sunglasses and general purpose glasses only and should not be used in a workplace environment.How do I know if I am wearing the correct eyewear?There are different types of eye protection that can be worn and it is important that the correct one is selected to give maximum safety. Below you will see the recommended applications for each style.Low Impact SpectaclesThese should only be worn in an environment where the main danger is from nuisance rather than impact. An example being an application such as sanding of woodwork where a lot of dust may be created, or an electrical pole worker who has an issue
fact it has no lens marking.Medium Impact SpectaclesMedium impact should be worn where there is a danger from medium velocity impact such as a nail from a nail gun. A medium impact spectacle that complies with AS1337:1992 will
High Impact ProtectionHigh impact protection can only be achieved under the
shield. These should be worn when there is a danger of high velocity impact such as debris from an angle grinder. A Full face
the lens.Heat ProtectionThere are many applications where molten metal or hot solids are an issue and it is recommended that for these applications that a suitable goggle or full face shield is used. Under the
is suitable for this application.According to government statistics there were over 6500 claims for eye injuries in 2002 in Australia. It is important that eye protection is a priority in the workplace so check the following to make sure you are operating safely.Check that your eyewear has AS1337 stamped on it: • Make sure you are using the right level of protection for the application • Review the work area and assess the hazards • If you are unsure go to the maximum protection
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999266
Safety GlassesTsunami: Unit of Measure - Pair
Safety eyewear for general industrial applications • Lightweight • AS/NZS1337:1992 approved • Medium Impact
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201099 Clear Tsunami 1600
44201100 Smoke Tsunami 1602
ProSafe Yukon Visitor Spec: Unit of Measure - Pair
• Ideal cost effective visitor and over spectacle option • Conventional design with integral vented side shields, providing comfort in humid conditions • AS/NZS 1337 approved - medium impact protection
OR
DER
CO
DE
Des
crip
tion
44201990 ProSafe Yukon Clear Lens & Frame
44201991 ProSafe Yukon Grey Lens & Frame
ProSafe Klondike: Unit of Measure - Pair
• Contoured frame featuring adjustable length side arms
and sizes • Soft gel nosepiece • Exclusive Duramass AF4 anti-fog coating option • Exclusive Duramass hardcoat scratch resistant coating (light mirror only) • AS/NZS 1337 approved - medium impact protection
OR
DER
CO
DE
Des
crip
tion
44202002 ProSafe Klondike Clear Anti-Fog Lens
44202003 ProSafe Klondike Smoke Anti-Fog Lens
44202004 ProSafe Klondike Light Mirror Lens
ProSafe BearKat: Unit of Measure - Pair
• Provides excellent eye coverage • Soft non-slip gel temple sleeves for wearer comfort
light • Exclusive Duramass AF4 anti-fog coating option • Exclusive Duramass hardcoat scratch resistant coating (blue mirror only) • AS/NZS 1337 approved - medium impact protection
OR
DER
CO
DE
Des
crip
tion
44201996 ProSafe Bearkat Clear Anti-Fog Lens
44201997 ProSafe Bearkat Grey Anti-Fog Lens
44201998 ProSafe Bearkat Lite Blue Anti-Fog Lens
44201999 ProSafe Bearkat Blue Mirror Lens
MSA Nullarbor: Unit of Measure - PairO
RD
ER C
OD
E
Des
crip
tion
Mod
el
44011036 Smoke 229207C
44011034 Clear 229207S
44011037 Rainbow 229027BS
Did you know the two most common tasks being performed when eye injury occurs are grinding and welding. Subsequent follow up reporting shows statistically that had correct eye protection been in use then the injury would have been preventable. Bullivants have a range of low, medium and high impact solutions to cover all applications where eyes may be at risk.
WWW.BULLIVANTS.COM 267
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Bolle Prowler: Unit of Measure - Pair
• Co-moulded temples and nylon frame for strength and
• Exceptional visual clarity and durability - 8 base distortion free lens • ALS anti fog, anti scratch coating on both sides of lens (clear and smoke only) • Tested & approved to AS/NZS1337:1992 for medium impact protection
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201483 Bolle Prowler Clear Lens 1626401
44201484 Bolle Prowler Smoke Lens 1626402
44201485 Bolle Prowler Silver Lens 1626403
44201486 Bolle Prowler Blue Lens 1626404
44201499 Bolle Prowler Polarised Lens 1626405
Bolle Sidewinder: Unit of Measure - Pair
• Strong lightweight half frame design
• Exceptional visual clarity and durability - ALS anti fog, anti scratch coating on both sides of lens • Amber lens is ideal for low light conditions
contrast and clarity • Tested & approved to AS/NZS1337:1992 for medium impact protection
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201471 Bolle Sidewinder Clear Lens 1615501
44201470 Bolle Sidewinder Smoke Lens 1615502
44201469 Bolle Sidewinder Amber Lens 1615503
44201468 Bolle Sidewinder Bronze Lens 1615505
Bolle Tracker: Unit of Measure - Pair
• Detachable rubberised eye shield with venting offers superior dust protection
cell foam eye shield provides exceptional comfort • Distortion free, exceptional visual clarity • ALS anti fog, anti scratch coating on both sides of lens • Tested & approved to AS/NZS1337:1992 for medium impact protection
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201811 Bolle Tracker Clear Lens 1651001
44201812 Bolle Tracker Smoke Lens 1651002
Bolle Hurricane: Unit of Measure - Pair
• Exceptional visual clarity and durability - ALS anti fog, anti scratch coating on both sides of lens • Polarised Lens Option eliminating glare • Replacement lens available • Tested & approved to AS/NZS1337:1992 for medium impact protection
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201054 Bolle Hurricaine Clear Lens 1662201
44201052 Bolle Hurricaine Smoke Lens 1662202
44201053 Bolle Hurricaine Silver Lens 1662203
44201055 Bolle Hurricaine Blue Lens 1662204
44201046 Bolle Hurricaine GF15 Polarised 1662215
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999268
Bolle Prism: Unit of Measure - Pair
• Distortion free lens • One piece polycarbonate spectacle with no metal parts - fully recyclable • Ultra lightweight comfortable for long term wearing • Exceptional visual clarity and durability - ALS anti fog, anti scratch coating on both sides of lens
contrast and clarity • Tested & approved to AS/NZS1337:1992 for medium impact protection
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201479 Bolle Prism Clear Lens 1614401
44201480 Bolle Prism Smoke Lens 1614402
44201481 Bolle Prism Silver Lens 1614403
44201482 Bolle Prism Bronze Lens 1614404
Bolle Bandido: Unit of Measure - Pair
• Lightweight comfortable one piece frame • 10 base curve, distortion free lens for excellent eye coverage and peripheral vision • Exceptional visual clarity and durability • ALS anti fog, anti scratch coating on both sides of the lens (clear, smoke and amber). • Tested & approved to AS/NZS1337:1992 for medium impact protection
OR
DER
CO
DE
Des
crip
tion
Mod
el
44182986 Bolle Bandido Clear Lens 1667201
44182987 Bolle Bandido Smoke Lens 1667202
44182988 Bolle Bandido Amber Lens 1667203
EYRES 102 TERMINATOR Medium Impact: Unit of Measure - Pair
• Anti Slip pads • One piece eyewear • IR3 and IR5 Welding lens available
OR
DER
CO
DE
Des
crip
tion
Mod
el
44012005 Terminator Clear Lens 102-OP-CL
44012007 Terminator Dark Blue Lens 102-OP-BG
44012009 Terminator Light Blue Lens 102-OP-LBG
44012001 Terminator Light Brown I/O Lens 102-OP-IO
44200914 Terminator Amber Lens 102-OP-AM
44202088 Terminator Brown Lens 102-OP-WB80
44010196 Terminator Matt Green Frame Infrared 3 Lens 102-OP-IR3
44010197 Terminator Matt Dark Green Frame Infrared 5 Lens 102-OP-IR5
44010198 Terminator Matt Grey Frame Grey Infrared Lens 102-OP-GYIRS11
44010199 Terminator Clear Frame Clear Anti-Fog Lens 102-OP-CLAF
EYRES 313 MINE Medium Impact: Unit of Measure - Pair
• Offers unobstructed vision, comfort and durability
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200191 Mine Clear Frame Clear AF Lens 313-OP-CLAF
44012026 Mine Smoke Frame Smoke AF Lens 313-OP-GYAF
44012027 Mine Light Brown I/O Lens 313-OP-IO
44201384 Mine Amber Lens 313-OP-AM
WWW.BULLIVANTS.COM 269
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
EYRES 800 SWITCH Medium Impact: Unit of Measure - Pair
• Performance lens insert • Removable anti-perspirant foam brow bar • Flexible zones • Head strap included • Quick Change lens system • Adjustable nose piece • Prescription lens insert available
OR
DER
CO
DE
Des
crip
tion
Mod
el
44202086 Switch 800 Grey Lens 800-M1-GY
44202087 Switch 800 Silver Lens 800-M2-FS
EYRES 412 YAGAN Medium Impact: Unit of Measure - Pair
• Anti Slip pads
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200194 Yagan Black Frame Clear Lens 412-MI-CL
44012002 Yagan Black Frame Grey Lens 412-MI-GY
44200192 Yagan Black Frame Light Brown Lens 412-MI-IO
44012021 Yagan Black Frame Polarised Grey Lens 412-MI-PG
EYRES 702 RAZOR Medium Impact: Unit of Measure - Pair
• Frontal brow-guard for added protection • 8 Base Curve • Anti Slip pads
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200915 Razor Crystal Smoke Frame Clear Lens 702-CS-CL
44200086 Razor Crystal Charcoal Frame Grey Lens 702-C8-GY
44200111 Razor Light Bronze Frame Grey Lens 702-L9-FS
44200087 Razor Royal Blue Frame Grey Lens 702-R4-FS
44200837 Razor Crystal Burgundy Frame Grey Lens 702-C3-FS
44200826 Razor Crystal Charcoal Frame Polarised Grey Lens 702-C8-PGBAR
EYRES 622 HOTROD Medium Impact: Unit of Measure - Pair
• Anti-Slip pads • Wrap around
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201847 Hotrod Metallic Pearl Frame Brown Lens 622-MP-WB10
44200824 Hotrod Black Frame Grey Lens 622-SB-FS
44202099 Hotrod Black Frame Polarised Grey Lens 622-SB-PG
44010011Hotrod Black Frame
Polarised Brown Flash Silver Lens
622-SB-PBFS
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999270
EYRES 609 REEM Medium Impact: Unit of Measure - Pair
• Anti-Slip pads • Flexible zones
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010019 Reem Shiny Black Frame Polarised Smoke Lens 609-S1-PG
44201371 Reem Crystal Zebra Safety Glasses 609-CZ-GY
EYRES 201 INSULATOR Medium Impact: Unit of Measure - Pair
• No metal parts - non conductive • Anti-slip pads
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201849Insulator Crystal Green
Frame Light Brown (WB50) Lens
201-CG-WB50FS
44202129 Insulator Crystal Blue Frame Clear Lens 201-C4-CL
44202130 Insulator Crystal Charcoal Frame Blue Grey Lens 201-C8-BG
EYRES 310 ODDIE Medium Impact: Unit of Measure - Pair
• Interchangeable arms and strap • Anti-fog coating and anti-scratch technology • Foam seal to protect against dust and other hazardous particles • RX insert available • Photocromatic lenses available
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010185 Oddie Matt Black Frame Clear AF Lens 310-M1-CLAF
44010186 Oddie Matt Black Frame Grey Lens 310-M1-GY
44010187 Oddie Matt Black Frame WB50 Light Brown Lens 310-M1-WB50FS
44010188 Oddie Matt Black Temple Arms 310-M1-ARM
EYRES 321 MEDIC Medium Impact: Unit of Measure - Pair
• TORIC LENS - A lens with two different optical powers to reduce distortion
• Rubber nose piece an temple tips • Wrap around for clear peripheral vision
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010189 Medic Matt Clear Frame Clear Lens 321-CL-CL
44010190 Medic Matt Grey Frame Grey Lens 321-M8-GY
44010191 Medic Brown Frame Light Brown Flash Silver Lens 321-CB-WB50FS
WWW.BULLIVANTS.COM 271
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
EYRES 630 ZERO Medium Impact: Unit of Measure - Pair
• Resistant to a broad range of chemicals and solvents • Generous ocular coverage for added protection • High impact resistance • Modern styling
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010068Zero Crystal Black Snake With Silver Frame Grey
Flash Silver Lens630-C1S-FS
44010069Zero Crystal Black
Snake With Silver Frame Polarised Smoke FS Lens
630-C1S-PGFS
44010183Zero Crystal White Black Frame Weather Brown
WB10 Lens630-CW1-WB10
EYRES 631 SPACE Medium Impact: Unit of Measure - Pair
• Generous ocular coverage for added protection • Wrap around for clear peripheral vision
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010184Space Crystal White
Black Frame Weather Brown (WB10) Lens
631-CW1-WB10
44010070Space Crystal Black Snake Frame Smoke
Flash Silver Lens631-C1S-FS
44010071Space Crystal Black
Snake Frame Polarised Smoke Lens
631-C1S-PGFS
EYRES 702WF RAZOR EDGE Medium Impact: Unit of Measure - Pair
• Foam seal to protect against dust and other hazardous particles • New and improved anti fog coating to prevent fogging, condensation and small scratches • Sleek and angular design lines moulding to the contour of the cheekbone
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010170Razor Edge Crystal
Black Frame Foam Seal Grey AF Lens
702WF-CD1-GYAF
44010200Razor Edge Crystal
Black Frame Weather Brown 50 AF Lens
702WF-CD1-WB50AF
44010193Razor Edge Royal Blue Foam Seal Frame Clear
Anti-Fog Lens702WF-R4-CLAF
EYRES 706 CHILLI Medium Impact: Unit of Measure - Pair
• 8 base curve frame • Wrap around for clear peripheral vision • Modern styling
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201376 Chilli Crystal Cheetah Frame Brown Lens 706-CC-BR
44202216 Chilli Shiny Black Frame Polarised Grey Lens 706-S1-PG
44201375 Chilli Shiny Black Frame Smoke Lens 706-S1-GY
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999272
803 TRANSFORMER Medium Impact: Unit of Measure - Pair
• Modular frame • Quick change lens system (lenses sold separately) • Sweat blocker • Foam pad • Anti-Slip pads • 8 Base Curve • Head strap • Adjustable nose • Made to order Transitions and MDX Photochromatic lenses available, ask in store for details • Prescription lens available (conditions apply) • EASY RIDER Occupational and Professional value bundles available, ask in store for details
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010171 Transformer Chrome Clear Lens 803-CH-CL
44010172 Transformer Shiny Black Crystal Clear Lens 803-C1-CL
44010173 Transformer Gun Metal Clear Lens 803-GM-CL
803 TRANSFORMER Accessories: Unit of Measure - Pair
OR
DER
CO
DE
Des
crip
tion
Mod
el
44010174 Amber Lenses 803LNS-AM
44010175 Clear Lenses 803LNS-CL
44010176 Grey (Flash Silver) Lenses 803LNS-FS
44010177 Polarised Brown Lenses 803LNS-PB
44010178 Polarised Grey (Hydrophobic) Lenses 803LNS-PGWR
44010179 Polarised Green Lenses 803LNS-PLGN
44010180 Weather Brown 10 Lenses 803LNS-WB10
44010181 Weather Brown 50 Lenses 803LNS-WB50
44010182 Weather Brown 80 Lenses 803LNS-WB80
GogglesBolle Blast Duo: Unit of Measure - Pair
• Can be worn over spectacles and respirators • Manufacturing, Petrochemicals, spray/washdown, acid/alkaline handling, automotive
• PVC foam with SBR closed cell foam surround has all vents closed giving splash protection • Dual lens creates a thermal barrier providing maximum anti fogging • AS/NZS1337:1992 approved medium impact protection and for gas, dust and splash approval
OR
DER
CO
DE
Lens
Tin
t
Mod
el
44201493 Blast Duo Goggles Blue Frame Clear Lens 1669209
44201494 Blast Duo Goggles Orange Frame Clear Lens 1669211
44201495 Blast Duo Goggles Charcoal Frame Clear Lens 1650708
Bolle Nitro: Unit of Measure - Pair
• Mining, emergency response, engineering, process work, chemical process, medical, laboratories
• Exceptional visual clarity and durability - ALS anti fog, anti scratch coating on both sides of the lens • AS/NZS1337:1992 approved for medium impact and splash protection
approved for high temperature
OR
DER
CO
DE
Lens
Tin
t
Mod
el
44201496 Nitro Goggles PVC Frame Clear Lens 1641101
44201497 Nitro Goggles PVC Frame Smoke Lens 1641102
44201498 Nitro Goggles Orange 1641103
WWW.BULLIVANTS.COM 273
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
EYRES 104 STORMSTRIKE Medium Impact: Unit of Measure - Pair
• Anti-Fog • Open/Close temple vents • Splashproof • Fire resistant • Foam face padding for comfort
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200363 Stormstrike Black Frame Clear AF Lens Goggle 104-MI-CLAF
44200364 Stormstrike Black Frame Grey AF Lens Goggle 104-MI-GYAF
EYRES 707 GOGGLE Medium Impact: Unit of Measure - Pair
• Anti Fog • Goggle strap/arms interchange system • Splashproof • Fire resistant • Foam face padding for comfort • Interchangeable lens system (lenses sold separately) • Prescription insert available (sold separately)
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200359 707 Black Frame Grey AF Lens Goggle 707-M1-GYAF
44201258 707 Black Frame Clear AF Lens Goggle 707-M1-CLAF
Honeywell MAXX PRO™: Unit of Measure - Pair
• Easy lens replacement system reduces cost. • Toric lens gives superior optics & peripheral vision for all day use.
face respirators. • Indirect vent system channels air over the lens minimising fogging.
• AS/NZS 1337, Licence No: SMK 2209.
OR
DER
CO
DE
Des
crip
tion
Mod
el
44201935 Blue/Grey Frame Clear Anti Fog Lens 1011072AN
44201936 Blue/Grey Frame Grey Anti Fog Lens 1011072GYAN
44201937 Clear Anti Fog Replacement Lens 1011070AN
44201938 Grey Anti Fog Replacement Lens 1011070GYAN
Accessories: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
Mod
el
42240294 Bolle Power Cord Adjustable Neck Strap 1601001
42240081 Soft safe case 3209927
44201948 Semi-hard Spectacle Case 3111408
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999274
Unisafe Metal Lens Cleaning Station: Unit of Measure - Each
Complete metal lens cleaning station including 2 pump bottles of lens cleaner and tissue.
OR
DER
CO
DE
Des
crip
tion
Mod
el
44200474 Metal Lens Cleaning Station EC200
ProSafe Mity-Wipe Lens Cleaner: Unit of Measure - Box of 300
OR
DER
CO
DE
Des
crip
tion
44201992 Pre-moistened Anti-fog Towelettes
ProSafe Lens Cleaning Towelette: Unit of Measure - Box of 500
OR
DER
CO
DE
Des
crip
tion
44202005 Pre-moistened Towelettes
Hand ProtectionThe standard which is applicable to gloves is AS2161:1998 and has been developed based on the European Standards to ensure improved protection in the workplace.Glove Selection • Always select gloves that are the correct size. If they are too small they may tear and be uncomfortable, if they are too large this may interfere with dexterity. • Select the correct style of glove for the application required. For example there may be an exposure to chemicals, reference should be made to the relevant MSDS to aid selection and ensure adequate protection.Glove Inspection • Before use, all gloves should be inspected for any signs of degradation (swelling, cracking, shrinking or discolouration) and any signs of holes or puncture. A damaged glove should immediately be removed from service to maintain the full protection intended. • Change gloves frequently, especially thinner disposable gloves that have been exposed to chemicals. If a glove becomes contaminated it should be removed and discarded as soon as possible.General Requirements of EN420
protective gloves: • Product and packaging information and marking • Design and construction • Sizing • Innocuousness • Cleaning Instructions • Dexterity • Water vapour transmission and absorption • Electrostatic properties
Mechanical Hazards EN388 Rating
Abrasion Resistance 0 - 4
Blade cut resistance 0 - 5
Tear resistance 0 - 4
Puncture resistance 0 - 4
Chemical & Micro-organisms EN374 Rating
Resistance to chemical hazards (permeation) 1 - 6
Protection From Cold EN511 Rating
Resistance to convective cold 0 - 4
Resistance to contact cold 0 - 4
Permeability to water 0 - 1
Thermal Hazards (Heat/Fire) EN407 Rating
Burning behaviour 0 - 4
Contact Heat 0 - 4
Convective heat 0 - 4
Radiant heat 0 - 4
Small splashes of molten metal 0 - 4
Large splashes of molten metal 0 - 4
The higher the score the better the performance.
WWW.BULLIVANTS.COM 275
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
General Purpose - LeatherPremium Cow Grain Riggers: Unit of Measure - Pair
• Premium grade cow grain riggers • Wing thumb stitch free palm
• Mining, rigging, construction, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44200795 Cow Grain Riggers Small
44200416 Cow Grain Riggers Medium
44202162 Cow Grain Riggers Large
44202163 Cow Grain Riggers Extra Large
Premium Pig Grain Riggers: Unit of Measure - Pair
• Premium grade pig grain riggers • Soft feel for better dexterity • Wing thumb stitch free palm
• Mining, rigging, construction, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44200983 Pig Grain Riggers Small
44200071 Pig Grain Riggers Medium
44090113 Pig Grain Riggers Large
Candy Stripe: Unit of Measure - Pair
• Cow split leather palm with cotton back • Lightweight and economical • Safety cuff and knuckle bar for added protection • Construction, Maintenance, General Purpose Handling
OR
DER
CO
DE
Des
crip
tion
44090071
Yellow Grey Leather: Unit of Measure - Pair
• Heavy duty cow split one piece palm • Yellow safety cuff and knuckle bar for extra protection • lightweight, economical cotton back • Mining, rigging, construction, polishing, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44090067
Grey Chrome Leather: Unit of Measure - Pair
• Heavy duty all chrome leather glove • Tough and durable with 5cm chrome leather cuff for added protection • Glass handling, light fabrication, warehousing, waste management, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44200866 Grey Chrome Leather Extra Large
Welding GlovesBlack & Gold: Unit of Measure - Pair
• High quality cow split leather for comfort and economy • Lined and welted • 406mm long for forearm protection
OR
DER
CO
DE
Des
crip
tion
44090021 Black & Gold Welders
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999276
Red Kevlar: Unit of Measure - Pair
• High quality red cow split leather • Kevlar stitched to withstand high temperatures for long periods • Lined & welted
• 406mm long for forearm protection
OR
DER
CO
DE
Des
crip
tion
44090017 Red Welders
TIG Welder: Unit of Measure - Pair
• Soft, lightweight pig grain leather • Externally stitched for enhanced dexterity, comfort and feel • 300mm overall length
OR
DER
CO
DE
Des
crip
tion
44200172 TIG Welders
Felt Woven Kevlar: Unit of Measure - Pair
• Designed for heat and cut resistance • Can withstand temperatures up to 350°C • 400mm Overall Length
moulding, metal fabrication, sheet metal
OR
DER
CO
DE
Des
crip
tion
44200171
PVC GlovesStinga® - NPF: Unit of Measure - Pair
• (BHT) Bare Hand Technology • Seamless 15 gauge, 100% Apparel Grade Nylon shell • PVC foam coating provides water repellency, comfort and enhanced gripping power in wet and dry conditions • Woodworking, light fabrication, construction, whitegoods, petroleum industry, general purpose handling, automotive manufacturing, shipping and assembly
OR
DER
CO
DE
Des
crip
tion
44090144 Stinga PVC Foam Palm S
44090145 Stinga PVC Foam Palm M
44202215 Stinga PVC Foam Palm L
44090022 Stinga PVC Foam Palm XL
44090146 Stinga PVC Foam Palm 2XL
Premium Single Dip PVC: Unit of Measure - Pair
• Single dipped • Resistant to oil, grease and chemicals • Interlock lined for easy on/off
OR
DER
CO
DE
Des
crip
tion
44090047
44090051
44183898
WWW.BULLIVANTS.COM 277
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Premium Double Dip PVC: Unit of Measure - Pair
• Increased resistance to oil, grease and chemicals • Jersey lined for comfort and sweat absorption
OR
DER
CO
DE
Des
crip
tion
44090035
44200062
Latex GlovesUltratech Latex Coated Nylon: Unit of Measure - Pair
• Textured latex coating provides excellent grip • Seamless 13 gauge 100% nylon liner eliminates discomfort caused by seams • Assembly, glass handling, manufacturing and shipping
OR
DER
CO
DE
Des
crip
tion
44200968 Latex Coated Nylon W9680R S
44200969 Latex Coated Nylon W9680R M
44200970 Latex Coated Nylon W9680R L
44200971 Latex Coated Nylon W9680R XL
44202047 Latex Coated Nylon W9680R 2XL
Latex Foam: Unit of Measure - Pair
• Revolutionary Latex foam coated palm provides the highest level of comfort • Anti Static Liner • Excellent grip in wet and dry environments • Inherently hypo-allergenic • Anti-microbial and dust mite resistant • Hi-Vis Yellow for great visibility in the workplace • Construction, gardening, sheet metal work, brickwork, general purpose handling, assembly lines
OR
DER
CO
DE
Des
crip
tion
44090144 Latex foam anti static hypo-allergenic M
44090145 Latex foam anti static hypo-allergenic L
44090056 Latex foam anti static hypo-allergenic XL
44090146 Latex foam anti static hypo-allergenic 2XL
Latex Coated Cotton: Unit of Measure - Pair
• Blue textured latex coating provides excellent grip • Open back allows glove to breathe for wearer comfort • Agriculture, assembly, concrete, brick, construction, maintenance, materials handling, shipping/receiving and transport
OR
DER
CO
DE
Des
crip
tion
44200972 Latex Coated Cotton W9688 S
44200973 Latex Coated Cotton W9688 M
44200974 Latex Coated Cotton W9688 L
44200975 Latex Coated Cotton W9688 XL
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999278
Latex Wool Lined: Unit of Measure - Pair
OR
DER
CO
DE
Des
crip
tion
44201313 Latex Coated Cotton With Wool Lining M
44201314 Latex Coated Cotton With Wool Lining L
44201315 Latex Coated Cotton With Wool Lining XL
Latex Glass Gripper: Unit of Measure - Pair
• Yellow latex rubber • Open back for ventilation • Knitted wrist to exclude debris • Ripple palm pattern for maximum grip • Jersey lined for comfort and sweat absorption
glass, tiles & ceramics handling, warehousing, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44090002
Nitrile GlovesUltratech Non Breathable Nitrile Foam: Unit of Measure - Pair
• Black nitrile on black shell colour combination hides dirt • Black nitrile foam coating provides excellent grip and abrasive resistance • Assembly, automotive, general maintenance, materials handling and metal fabrication
OR
DER
CO
DE
Des
crip
tion
44202038 Non Breathable Nitrile Foam W9673NB S
44202039 Non Breathable Nitrile Foam W9673NB M
44202040 Non Breathable Nitrile Foam W9673NB L
44202041 Non Breathable Nitrile Foam W9673NB XL
44202042 Non Breathable Nitrile Foam W9673NB 2XL
Ultratech Breathable Nitrile Foam: Unit of Measure - Pair
• Excellent grip and dexterity for small part handling and assorted industrial applications • Assembly, automotive, general maintenance, materials handling, metal fabrication and warehousing
OR
DER
CO
DE
Des
crip
tion
44202036 Breathable Nitrile Foam W9673B S
44200965 Breathable Nitrile Foam W9673B M
44200966 Breathable Nitrile Foam W9673B L
44200967 Breathable Nitrile Foam W9673B XL
44202037 Breathable Nitrile Foam W9673B 2XL
WWW.BULLIVANTS.COM 279
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Super-Lite Yellow: Unit of Measure - Pair
• Lightweight 3/4 dipped yellow nitrile • Abrasion and chemical resistant • Knitted wrist to exclude debris • Open back improves ventilation • Mining, assembly, chemical handling, waste management, foundry/fabrication, general purpose handling
OR
DER
CO
DE
Des
crip
tion
442000110 Super-Lite nitrile dipped S
44200012 Super-Lite nitrile dipped M
44200013 Super-Lite nitrile dipped L
Super-Guard Blue: Unit of Measure - Pair
• Heavy weight fully dipped blue nitrile for full hand protection • Abrasion and chemical resistant • Knitted wrist • Mining, assembly, chemical handling, waste management, foundry/fabrication, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44200687 Super-Guard Blue Nitrile Dipped Size 9
44200688 Super-Guard Blue Nitrile Dipped Size 10
Super-Guard Safety Cuff: Unit of Measure - Pair
• Abrasion and chemical resistant • Canvas safety cuff • Heavy weight fully dipped blue nitrile for full hand protection • Mining, assembly, chemical handling, waste management, foundry/fabrication, general purpose handling
OR
DER
CO
DE
Des
crip
tion
44200700 Super-Guard blue Safety Cuff Fully Dipped Size 9
44200701 Super-Guard blue Safety Cuff Fully Dipped Size 10
PU GlovesUltratech PU Coated Nylon: Unit of Measure - Pair
and sense of touch • Excellent abrasion resistant • Assembly, automotive, manufacturing and shipping
OR
DER
CO
DE
Des
crip
tion
44202034 PU Coated Nylon W9696 S
44200976 PU Coated Nylon W9696 M
44200977 PU Coated Nylon W9696 L
44200978 PU Coated Nylon W9696 XL
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999280
Chemical GlovesGreen Nitrile Chemical: Unit of Measure - Pair
• Premium grade Nitrile for maximum abrasion and chemical resistance • Electrostatic lining technology prevents lining being shed and improves comfort • Textured palm for enhanced grip • 45cm length for forearm protection • Chemical processing and handling, aerospace industry, automotive industry, machine operating, industrial cleaning, metal fabrication, painting industry, petroleum industry, pharmaceutical, printing industry
OR
DER
CO
DE
Des
crip
tion
44202198 Green Nitrile Chemical 45cm L
44200065 Green Nitrile Chemical 45cm XL
Black Knight Latex: Unit of Measure - Pair
• Natural rubber latex offers better chemical and mechanical resistance • Sanitised for guarantee of cleanliness and inhibition of bacterial growth
• 45cm for forearm protection • Chemical process and handling, abattoirs, cleaning, automotive, food process
OR
DER
CO
DE
Des
crip
tion
44090037A Black Knight Latex M
44090038 Black Knight Latex L
44090039 Black Knight Latex XL
Black Neoprene: Unit of Measure - Pair
• Heavy duty neoprene, excellent for chemical handling, with a high resistance to most solvents, mild acids, oils and fats
• Electrostatic lining technology prevents lining being shed and improves comfort • 33cm length • Chemical processing and handling, aerospace industry, automotive industry, machine operating, industrial cleaning,
pharmaceutical, printing industry
OR
DER
CO
DE
Des
crip
tion
44200173 Black Neoprene L
44200176 Black Neoprene XL
Cut Resistant GlovesKevlar with Latex Coating: Unit of Measure - Pair
• 100% kevlar knitted 10 gauge • Blue dipped latex palm to enhance grip • Increased cut and abrasion resistance • Moderate heat protection • Cut level 4 protection • Assembly, ceramics and glass handling, materials handling, metal fabrication, automotive
OR
DER
CO
DE
Des
crip
tion
44201311 Kevlar Cut Resistant with Latex Coating W9687 S
44200170 Kevlar Cut Resistant with Latex Coating W9687 M
44200175 Kevlar Cut Resistant with Latex Coating W9687 L
44201312 Kevlar Cut Resistant with Latex Coating W9687 XL
WWW.BULLIVANTS.COM 281
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Kevlar with Nitrile Coating: Unit of Measure - Pair
• 100% kevlar knitted 13 gauge • Moderate heat protection • Black dipped nitrile palm to enhance grip • Increased cut and abrasion resistance • Assembly, ceramics and glass handling, materials handling, metal fabrication, automotive
OR
DER
CO
DE
Des
crip
tion
44202015 Kevlar Cut Resistant with Nitrile Coating W9693 S
44202016 Kevlar Cut Resistant with Nitrile Coating W9693 M
44202017 Kevlar Cut Resistant with Nitrile Coating W9693 L
44202018 Kevlar Cut Resistant with Nitrile Coating W9693 XL
Kevlar with Leather Palm: Unit of Measure - Pair
• Combination of Kevlar and tough split shoulder leather palm provide great all-round protection against abrasion, cut, tear and puncture hazards • Knit wrist prevents foreign matter entering glove • Automotive, construction and metal fabrication
OR
DER
CO
DE
Des
crip
tion
44202020 Kevlar Cut Resistant with Leather Palm W9686L L
Taeki 5™ Liner: Unit of Measure - Pair
• Provides outstanding abrasion, cut and tear capabilities • Lint free • High Contact Heat Protection - Up to 250°c
dexterity and wearing comfort • Can be washed and reused increasing the lifetime and value of the glove • Automotive, precise operations, food handling, clean room environment, glass and sheet metal handling, steel
OR
DER
CO
DE
Des
crip
tion
44090147 Taeki 5 Liner M
44090148 Taeki 5 Liner L
44090149 Taeki 5 Liner XL
44090150 Taeki 5 Liner XXL
Taeki 5™ Sleeve: Unit of Measure - Pair
• Thumb slot to minimise movement and increase wrist protection • 35cm length • Provides outstanding abrasion, cut and tear capabilities in handling dry, wet or greasy parts • Lint free • High contact heat protection - up to 100°C
dexterity and wearing comfort • Can be washed and reused increasing the lifetime and value of the glove • Automotive, glass industry, sheet metal handling, metal stamping, workshops working with metal, plastic extrusion
OR
DER
CO
DE
Des
crip
tion
44050134 Taeki 5 35cm Sleeve
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999282
Cotton GlovesKnitted Interlock Poly/Cotton: Unit of Measure - Pair
• 7 gauge knit for strength and ventilation • Bleached for clean appearance • Ambidextrous and can be reversed for maximum wear • Automotive, assembly line, cold storage, construction, light engineering, warehousing, general handling
OR
DER
CO
DE
Des
crip
tion
44183893 Knitted Interlock Poly/Cotton Liner Ladies
44090005 Knitted Interlock Poly/Cotton Liner Men’s Large
Knitted Interlock Poly/Cotton Polka Dots: Unit of Measure - Pair
• Black PVC dot grip on one side for grip • 7 gauge knit for strength and ventilation • Bleached for clean appearance • Mining, automotive, assembly line, cold storage, construction, light engineering, warehousing, general handling
OR
DER
CO
DE
Des
crip
tion
44200036 Polka Dot Knitted Interlock Poly/Cotton Liner Ladies
44090009 Polka Dot Knitted Interlock Poly/Cotton Liner Men’s Large
Cotton Drill: Unit of Measure - Pair
• Tough wearing cotton drill • Economical • Knitted wrist to exclude debris • Blue wrist indicates men’s, red wrist indicates ladies • Automotive, assembly line, cold storage, construction, light engineering, warehousing, general handling
OR
DER
CO
DE
Des
crip
tion
44183894 Cotton Drill Mens Large
44090001 Cotton Drill Ladies
Disposable GlovesGeneral Purpose Vinyl: Unit of Measure - Box of 100
• Latex free avoids allergic reaction • Cleaning, food preparation, food handling
OR
DER
CO
DE
Des
crip
tion
44201689 Disposable Vinyl Medium
44183895 Disposable Vinyl Large
44183896 Disposable Vinyl Extra Large
Natural Latex Examination: Unit of Measure - Box of 100
• TGA listed (ARTG143968) for use in medical applications • High-quality latex rubber • Sensitive touch for enhanced dexterity • Medical, veterinary, assembly, food preparation, painting, printing
OR
DER
CO
DE
Des
crip
tion
44090034 Disposable Latex Small
44090037 Disposable Latex Medium
44090031 Disposable Latex Large
Did you know that choosing hand protection based on the cheapest price may be a short term gain but result in unnecessary injury costs later on. With so
there really is a glove to suit every application ensuring workers are adequately protected for the activity in which they are engaged. Bullivants are able to offer a broad selection of gloves and provide solutions to best protect our customers.
WWW.BULLIVANTS.COM 283
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Nitrile Examination: Unit of Measure - Box of 100
• TGA listed (ARTG143969) for use in medical applications • Industrial grade synthetic nitrile - chemical, abrasion and oil resistant • Fully textured for enhanced grip • Medical, veterinary, assembly, food preparation, painting, printing
OR
DER
CO
DE
Des
crip
tion
44200660 Disposable Nitrile Medium
44200057 Disposable Nitrile Large
44200622 Disposable Nitrile Extra Large
Glove Clip: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
44090076 Glove Clip black suits most gloves
Protective ClothingHi Vis Safety VestsSelection and Use of High Visibility GarmentsThe High Visibility Safety Garments standard (AS/NZS 4602:1999) details of the requirements of personal safety garments to increase ability for the wearer to be seen. Material used in the design and manufacture of high visibility safety
Visibility Safety Garments standard (AS/NZS 4602:1999) details of the requirements of personal safety garments to increase ability for the wearer to be seen. Material used in the design and manufacture of high visibility safety garments must be
Class of GarmentClass D Features • For outdoor and day use only.
• High visibility materials must encircle the upper torso - minimum visible area of 0.4m2.Class D/N Features • For use in day or night, dawn, dusk or in poor weather conditions where there is illumination from headlights
Safety Vest - Class D/N: Unit of Measure - Each
Size
Fluo
ro O
rang
e
Fluo
ro Y
ello
wMedium 44051014 44182257
Large 44051013 44051016
X Large 44051004 44051007
2 X Large 44051020 44051021
3 X Large 44051031 44051030
Safety Vest - Class D: Unit of Measure - Each
Features
day use only.
Size
Fluo
ro O
rang
e
Fluo
ro Y
ello
w
Medium 44182258 44051017
Large 44051010 44051018
X Large 44051001 44051019
2 X Large 44051011 44051012
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999284
Disposable ClothingProvek Disposable Overalls: Unit of Measure - Each
Features
• Lightweight and soft with excellent strength • Breathable to reduce moisture build up • Water vapour permeable and water repellent • Excellent barrier to dust and broad range of chemicals • Lint-free • Good opacity.
Size
Whi
te
Medium 44182247
Large 44182246
X Large 44182248
2 X Large 44182245
Economy Disposable Overalls: Unit of Measure - Each
Features • Two way zipper • Durable & economical. • Lightweight polypropylene material with hood & elastic waist, cuff & ankle. • Ready access to clothing underneath.
Size
Blu
e
Whi
te
Medium 44182240 44182244
Large 44182239 44182243
X Large 44182241 44182249
2 X Large 44182238 44182242
RainwearYellow PVC Full Length Rain Coat: Unit of Measure - Each
Features • Two large pockets. • Hood with drawstring • PVC/ Polyester with elastic cuffs plus studs. • Full length for lower leg protection.
Size
Yello
w
Medium 44182255
Large 44182254
X Large 44182256
2 X Large 44182251
3 X Large 44182252
4 X Large 44182253
Yellow PVC 3/4 Length Rain Jacket: Unit of Measure - Each
Features • Two Large Pockets • Hood with drawstring • PVC/ Polyester with elastic cuffs plus studs. • 3/4 Length for easier movement
Size
Yello
w
Medium 44050004
Large 44050007
X Large 44050010
2 X Large 44050013
3 X Large 44050015
4 X Large 44050017
WWW.BULLIVANTS.COM 285
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Yellow PVC Rain Pants: Unit of Measure - Each
Features • Yellow PVC/ Polyester with elastic waist & ankle • Pocket slots allow access to pockets of clothing underneath
Size
Yello
w
Medium 44050016
Large 44050019
X Large 44050022
2 X Large 44050025
3 X Large 44050026
4 X Large 44050027
Yellow PVC/Nylon Rain Jacket & Pants Set: Unit of Measure - Each
Features • PVC/Nylon with elastic cuffs • Two large pockets • Hood with drawstring
Size
Yello
w
Medium 44201295
Large 44201296
X Large 44201297
2 X Large 44201298
3 X Large 44201299
PVC Aprons: Unit of Measure - Each
• Durable PVC in a range of colours • Blood, animal oil and fat resistant making it ideal for keeping clothes clean • Protection in destructive environments such as ultra-dirty or abrasive conditions • Easy-on and off for protection limits transfer of contamination between work areas
OR
DER
CO
DE
Des
crip
tion
44050011 PVC Apron Black
44050006 PVC Apron Green
Back Support Belt: Unit of Measure - Each
Features • Smooth glide adjustable clips. • 35mm wide support elastic braces. • Easy adjust elastic outer panels for added lower back support. • Tapered abdomen support panels.
OR
DER
CO
DE
Size
44184092 Small
44184091 Medium
44184090 Large
44184093 X Large
44184089 2 X Large
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999286
Procomfort Knee Pads: Unit of Measure - Pair
• Non-slip, nonmarking soft synthetic leather shell
• Gel padding back and sides enhances comfort and assists in even weight distribution
• Clip on buckle for easy on/off and easy adjustment
OR
DER
CO
DE
Des
crip
tion
44201867 Procomfort Knee Pads
Turtle Back Knee Pads: Unit of Measure - Pair
• Gel padding back and sides enhances comfort and assists in even weight distribution
• Clip on buckle for easy on/off and easy adjustment
OR
DER
CO
DE
Des
crip
tion
44201518 Turtle Back Knee Pads
Cooling ProductCooling Neck Tie: Unit of Measure - Each
Features • Quilted into four sections for an even distribution of hydration material. • Just soak in cold water for 5 minutes or for greater cooling place in freezer for 5 minutes once soaked. • Cooling crystals go to work to keep you cool for days. • Lightweight. • Washable.
• Outer shell is 100% cotton.
OR
DER
CO
DE
Col
our
46010103 Navy
Caribee Hi-Vis Flow Hydration Pack: Unit of Measure - Each
Features • 300D Polyester PU • Slimline hydration pack
• Insulated hydration sleeve • Twin shoulder duct hydration exit holes • Sternum strap
• Padded vent back system
OR
DER
CO
DE
Des
crip
tion
42240381 Hi Vis Caribee Hydration Pack
WWW.BULLIVANTS.COM 287
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Health, Safety & Environment EquipmentSpill Response KitsGeneral Purpose (GP) Spill KitsAsk about your free spill kit training package when you place your order. All Spill Kits contain signage and instructions.
Absorbs up to 270 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240060
50 of Hazchem Pads, 2 x 3m GP Boom, 4 x 1.2m GP Boom, 3 x 50L Bags GP Absorbent, 10 x Waste Bags, 2 Pair
PVC Gloves, 240L Mobile Bin, Spill Kit Cover
Absorbs up to 100 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240061
50 of Hazchem Pads, 1 x 3m GP Boom, 2 x 1.2m GP Boom, 1 x 50L Bags GP Absorbent, 5 x Waste Bags, 2 Pair
PVC Gloves, 140L Mobile Bin, Spill Kit Cover
Absorbs up to 32 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240062
10 of Hazchem Pads, 1 x 1.2m GP Boom, 1 x 15L Bag GP Absorbent, 2 x Waste Bags, 1 Pair PVC Gloves, Dustpan & Brush, Safety Orange Bag
Hazchem Absorbent Spill Kits
Absorbs up to 400 litres: Unit of Measure - EachO
RD
ER C
OD
E
Kit
Con
tent
s
42240069
150 x Hazchem Pads, 4 x 1.2m Hazchem Booms, 3 x 3m Hazchem Booms, 10 x Waste
Bags & Ties, 2 pair Neoprene Gloves, 1 x 240L Mobile Bin, Spill Kit Cover
Absorbs up to 120 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240070
100 x Hazchem Pads, 2 x 1.2m Hazchem Booms, 1 x 3m Hazchem Booms, 5 x Waste
Bags & Ties, 1 pair Neoprene Gloves, 1 x 140L Mobile Bin, Spill Kit Cover
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999288
Absorbs up to 50 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240071
50 x Hazchem Pads, 3 x 1.2m Hazchem Booms, 3 x Waste Bags
& Ties, 1 pair Neoprene Gloves, 1 x Reusable Zip-top Kit Bag
Absorbs up to 20 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
4224007210 x Hazchem Pads, 1 x 1.2m Hazchem Booms, 1 x Waste Bags & Ties, 1 pair Neoprene Gloves, 1 x Zip-top Kit Bag
Oil & Fuel (OF) Absorbent Spill Kits
Absorbs up to 20 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
4224006710 x Oil Pads, 1 x 1.2m Oil Boom, 1 x
Waste Bags & Ties, 1 pair Oil Resistant Gloves, 1 x Reusable Zip-top Kit Bag
Absorbs up to 400 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240065
150 x Oil Pads, 4 x 1.2m Oil Booms, 3 x 3m Oil Booms, 10 x Waste Bags & Ties,
2 pair Oil Resistant Gloves, 1 x 240L Mobile Bin, Spill Kit Cover
Absorbs up to 120 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
42240034
100 x Oil Pads, 2 x 1.2m Oil Booms, 1 x 3m Oil Boom, 5 x Waste Bags & Ties, 1 pair Oil Resistant Gloves, 1 x
140L Mobile Bin, Spill Kit Cover
Absorbs up to 50 litres: Unit of Measure - Each
OR
DER
CO
DE
Kit
Con
tent
s
4224006650 x Oil Pads, 3 x 1.2m Oil Booms, 3 x Waste Bags & Ties, 1 pair Oil Resistant Gloves, 1 x Reusable Zip-top Kit Bag
WWW.BULLIVANTS.COM 289
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
General Purpose (GP) Absorbents100% Organic GP Absorbent: Unit of Measure - Each
• Absorbs up to 5 times its weight • 100% organic and biodegradable
OR
DER
CO
DE
Size
42240027 15 litre bag
42240184 50 litre bag
Mineral Sponge Granular GP Absorbent: Unit of Measure - Each
• Does not break down and become slippery when wet • Ideal for high wind areas
OR
DER
CO
DE
Size
44200840 10 kg bag
General Purpose Land Booms: Unit of Measure - Each
OR
DER
CO
DE
Size
44202218 1.2m x 100mm
44200839 3.0m x 100mm
Oil and Fuel AbsorbentsOil and Fuel Absorbent Pads
OR
DER
CO
DE
Size
UO
M
42240029 480 x 430mm, 200gsm Pack of 100
42240030 480 x 430mm, 400gsm Pack of 50
42240028 480 x 430mm, 400gsm Pack of 100
Oil and Fuel Absorbent Rolls: Unit of Measure - Per Roll
OR
DER
CO
DE
Size
42240237 50m x 500mm, 200gsm
42240466 50m x 1m, 200gsm
42240465 46m x 960mm, 400gsm
Floating Oil and Fuel Absorbent Booms: Unit of Measure - Pack of 4
• Contain and absorb oil & fuel spill on water surface • Snaphooks & D-rings attached for easy connection
OR
DER
CO
DE
Size
42240471 3m x 125mm
42240472 3m x 200m
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999290
Hazchem AbsorbentsHazchem Absorbent Pads: Unit of Measure - Pack of 100
OR
DER
CO
DE
Size
42240470 480 x 430mm, 200gsm
42240469 480 x 430mm, 400gsm
Hazchem Absorbent Rolls: Unit of Measure - Per Roll
OR
DER
CO
DE
Size
42240468 46m x 480mm, 400gsm
42240467 50m x 1m, 200gsm
42240255 46m x 960mm, 400gsm
Safety Shower and Eyewash EquipmentSelf Contained Eyewash
• Includes water preservative and mounting bracket • Full compliance with AS4775 as a primary eyewash
OR
DER
CO
DE
Des
crip
tion
UO
M
44010000 Gravity fed portable eyewash Each
44200478 Water preservative solution, 250ml Box of 4
Plumbed in Eye/Facewash: Unit of Measure - Each
• New generation eye/face wash
• Comes with signage attached
OR
DER
CO
DE
Des
crip
tion
44201915 Wall Mounted Eye/Facewash, Hand Operated, Covered ABS plastic bowl
44170018 Bench Mounted Eye/Facewash Hand Operated, Covered bowl
44170019 Pedestal Mounted Eye/Facewash Hand/Foot Operated, Covered bowl
44170020 Wall mounted eye/facewash, hand operated, stainless steel bowl
Safety Shower Optional Extras: Unit of Measure - Each
• Colourbond signage meets AS1319 • Foot operation pedals come with chain attached
OR
DER
CO
DE
Des
crip
tion
44170021 Shower/Eyewash Sign, Double Sided, 300x400mm, w/ Brackets
44170022 Eyewash Sign, Single Sided 300x255mm
44170023 Foot Operation Pedal, Stainless Steel, Powder Coated Red
WWW.BULLIVANTS.COM 291
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Unit of Measure - Each
• Unique one touch stay open valve system
• Soft rubber single or dual cup with dust cover • Comes with 1.5 metre reinforced hose.
OR
DER
CO
DE
Des
crip
tion
44170024
44170025
Standard Combination Shower/Eyewash: Unit of Measure - Each
• Full compliance with AS4775 • Stainless steel shower pipes • Available with covered ABS or stainless steel bowl • Shown with optional signage, foot pedal & drench hose
OR
DER
CO
DE
Des
crip
tion
44170026 Hand Operated Safety Shower
44170027 Safety shower/eyewash, covered ABS bowl, hand operated
44170028 Safety shower/eyewash, stainless steel bowl, hand operated
Self Draining Combination Shower/Eyewash: Unit of Measure - Each
• Your best option when shower is exposed to direct sun • AS4775 requires water not more than 38 degrees C. • Drains water from pipes to prevent water overheating • Available with covered ABS or stainless steel bowl • Shown with optional signage & foot pedal
OR
DER
CO
DE
Des
crip
tion
44170029 Self-draining shower/eyewash, covered ABS bowl, hand operated
44170030 Self-draining shower/eyewash stainless steel bowl, hand operated
Self Contained 1200L Tank Shower
• Your best solution for areas where mains water supply is unreliable or unavailable. • Comes with stainless steel frame and shower rose, 1200L insulated tank, eyewash, signage and visual level indicator.
temperature range of 20-25deg in 60deg ambient temp. • Shown with optional foot control panel, side panels and solar shield.
OR
DER
CO
DE
Des
crip
tion
UO
M
44170031 1200L tank shower | with eyewash Each
44170032 1200L tank shower with eyewash and chiller Each
44170033 Water preservative for 1200L tank, 250ml bottle Box of 4
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999292
Flammable Liquids Storage Cabinets: Unit of Measure - Each
AS1940-2004 requires minor storage quantities of Class 3
• These safety cabinets comply with AS1940-2004 • Constructed from 1.2mm zincanneal steel • Three point latching mechanism and self closing doors • Comes complete with compliant signage
OR
DER
CO
DE
Cap
acity
(li
tres
)
Shel
ves
Dim
ensi
ons
44200196 30 1 800 x 505 x 460
44200197 60 2 1065 x 505 x 460
44200198 100 1 800 x 920 x 615
44200199 160 2 1295 x 1100 x 460
44200200 250 3 1825 x 1100 x 460
44202333 350 3 1825 x 1430 x 580
Corrosive Substance Storage Cabinets: Unit of Measure - Each
• These safety cabinets comply with AS3780 • Constructed from 1.2mm zincanneal steel • Three point latching mechanism and self closing doors • Comes complete with compliant signage
minimise damage caused by drips within the cabinet.
OR
DER
CO
DE
Cap
acity
(li
tres
or k
g)
Shel
ves
Dim
ensi
ons
44200201 30 1 800 x 505 x 460
44200202 60 2 1065 x 505 x 460
44202334 100 1 800 x 920 x 615
44200203 160 2 1295 x 1100 x 460
44200204 250 3 1825 x 1100 x 460
Spill Containment Pallets: Unit of Measure - Each
• Made from 100% virgin polyethylene • Broadband chemical resistance. Will not rust or corrode
• Compliant sump size for drums up to 205 litres
OR
DER
CO
DE
Des
crip
tion
UD
L (k
g)
Sum
p (L
)
42240035 4-Drum Spill Pallet 1280 x 1280 x 275mm 1250 230
44202335 2-Drum Spill Pallet 1220 x 820 x 330mm 650 240
• HDPE construction for maximum strength • Deck joiners, sump connectors and ramps available
OR
DER
CO
DE
Des
crip
tion
UD
L (k
g)
Sum
p (L
)
44202336 4-Drum Square 1660 x 1260 x 150mm 2000 300
44202337 4-Drum In-line 2610 x 895 x 150mm 2000 300
44202338 2-Drum 1260 x 860 x 150mm 1000 150
44202339 Spill Deck Ramp 650 x 800 x 165mm 300 -
WWW.BULLIVANTS.COM 293
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
IBC Spill Containment Units: Unit of Measure - Each
• Huge 1100 litre sump meets IBC storage requirements • Rotomoulded HDPE for excellent strength. • HDPE construction for maximum strength • Virgin polyethylene for broadband chemical resistance • Dispensing wells and weather proof covers available
OR
DER
CO
DE
Des
crip
tion
UD
L (k
g)
Sum
p (L
)44202263 Single IBC Bund
1760 x 1350 x 710mm 1500 1100
44201156 Dual IBC Bund 2560 x 1350 x 510mm 2500 1140
44202340 Single IBC Bund Dispensing Well - 86
44201786 Dual IBC Bund Dispensing Well - 86
44202249 Single IBC Bund Weather Cover - -
44202250 Dual IBC Bund Weather Cover - 86
Quickbund Portable Bunding: Unit of Measure - Each
Quickbund Portable Bunding is ideal for remote area and temporary applications. Walls can be easily folded down to allow loading by hand, forklift or pallet jack. • Made from X-R5 for high chemical resistance • High-frequency welded seams for addition strength • No tools required. Simply position and unfold • Compact, lightweight and easy to transport.
OR
DER
CO
DE
Size
(met
res)
Cap
acity
(li
tres
)
Wei
ght (
kg)
44202258 1.9 x 1.9 x 0.3 1000 10
44201112 3.2 x 1.9 x 0.3 1800 19
44202341 2.5 x 2.5 x 0.3 2000 20
44202342 3.2 x 3.2 x 0.3 3000 26
44202343 5.0 x 5.0 x 0.3 7500 45
44202344 10.0 x 5.0 x 0.3 15000 75
Storage Trays: Unit of Measure - Each
• Provides safe bunded storage drums, batteries, etc. • 100% high density polyethylene construction • Ribbed base provides strength and spill clearance
OR
DER
CO
DE
Size
(mm
)
Cap
acity
(li
tres
)
UD
L (k
g)
44202345 730 x 730 x 295 110 260
44202053 1290 x 730 x 295 230 600
Drip Trays: Unit of Measure - Each
• Made from chemical resistant polyethylene • Will not rust or corrode • Line with absorbent to instantly turn liquids into solids
OR
DER
CO
DE
Size
(mm
)
Cap
acity
(li
tres
)44202346 610 x 410 x 100 20
42240585 610 x 810 x 100 45
Mobile Dispensing Station: Unit of Measure - Each
• Safely move 205L drums from vertical to horizontal • Genuine single person operation. No forklift required • Single piece moulded polyethylene 230 litre sump • Lockable 3rd wheel means no-lift movement of drum • Double ratchet straps for extra load security
OR
DER
CO
DE
Size
(mm
)
Cap
acity
(li
tres
)
44202347 1600 x 740 x 640 230 300kg
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999294
Poly Drum Dolly: Unit of Measure - Each
• Ideal for moving drums around a workshop
• Sturdy handle with rotating lockable castors. • Use with drum funnel for collecting waste oil & coolant
OR
DER
CO
DE
Size
(mm
)
Cap
acity
(li
tres
)
42240493 725 x 725 x 995 30 300kg
Racker Stacker Drum Decanting System: Unit of Measure - Each
Store your drums ready for decanting with the racker stacker system. The racker base has a 400 litre sump. The optional stacker allows for an additional 2 x 205L drums to be stored on the same size footprint.
OR
DER
CO
DE
Size
(mm
)
Cap
acity
(li
tres
)
44202348 Racker (Base) 1390 x 1250 x 490 400 1250kg
44202349 Stacker (Top) 1240 x 795 x 370 - 600kg
IBC and 205L Drum Funnels: Unit of Measure - Each
• The perfect solution for waste oil & coolant collection • Large stable surface allows for controlled pouring • Made from tough polyethylene for maximum durability
OR
DER
CO
DE
Des
crip
tion
Size
(Dia
.)
44201787 IBC Funnel with lid 610mm
44202350 Drum Funnel with lid 640mm
Emergency Information Cabinet: Unit of Measure - Each
• Store MSDS information required by emergency services • Wall mountable and waterproof. • Lockable latches keyed to L003 for emergency access
OR
DER
CO
DE
Size
(mm
)
44202351 425 x 350 x 100
44202352 600 x 500 x 156
Sun ProtectionAustralia’s weather conditions require Sun protection year round. Sun Block should be used whenever conducting any outdoor activity.ProBloc Sunscreen: Unit of Measure - Each
• SPF 30+ sunscreen with moisturising Vitamin E. • 3 Hours water resistant
OR
DER
CO
DE
Des
crip
tion
44150015 Lip Balm 12g Tube
44184094 Sunscreen 125ml Tube
44150012 Sunscreen 250ml Bottle
44150013 Sunscreen 500ml Pump Pack Bottle
44150014 Sunscreen 1L Pump Pack Bottle
44150049 Sunscreen 2.5L Pump Pack Bottle
WWW.BULLIVANTS.COM 295
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T • High quality rubber
OR
DER
CO
DE
Des
crip
tion
44130004
44130008
44183999
Unit of Measure - Each
• High quality rubber • Even greater visibility
OR
DER
CO
DE
Des
crip
tion
44200468
44130005
44130007
Hi-Vis Bollard: Unit of Measure - Each
• High quality rubber • Even greater visibility
OR
DER
CO
DE
Des
crip
tion
42240022 6kg Bollard
42240023 8kg Bollard
Barrier Mesh Fencing: Unit of Measure - Each
• Provides excellent visibility for hazard areas.
OR
DER
CO
DE
Des
crip
tion
42240021 50m X 1m Barrier Mesh
Bunting: Unit of Measure - Each
• Heavy duty.
OR
DER
CO
DE
Des
crip
tion
44110001 30m Orange Bunting
44201943
Tapes, Tags & Safety ChainBarricade Tape: Unit of Measure - Per Roll
• 1 metre high x 50 metre roll • Weight of 8kg per roll • Provided excellent visibility for hazard areas
OR
DER
CO
DE
Des
crip
tion
44110003 Red/White Barricade Tape 100m x 75mm
44183911
44110010 Tape 100m x 75mm
44183910 Yellow/Black Barricade Tape 100m x 75mm
44110005
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999296
Safety Tags: Unit of Measure - Per Pack of 100
• 125mm x 75mm • Non tear/all weather
OR
DER
CO
DE
Des
crip
tion
44170077
44170075
44201278 Information Safety Tag
Safety Chain: Unit of Measure - Per Roll
• 8mm UV stabilised • 25 metre roll • Provides excellent visibility for hazard areas
OR
DER
CO
DE
Des
crip
tion
WCPY-080-025 25m Yellow Safety Chain
Safety SignsBullivants are able to offer you the full range of safety signs and labels for the workplace. All of our signs comply with the relevant Australian Standards for the class required. In this catalogue you will see a brief snapshot of what is available. For more information on the full product range contact your local Bullivants branch and they will help you with your selection. We can also supply non standard custom made signs to suit individual requirements.
AS1319 Mandatory Signs: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
Size
(mm
)
Mat
eria
ls
44200247 Head Protection Must Be Worn 450 x 600 Metal
44200245 Eye Protection Must Be Worn 450 x 600 Metal
44200248Hearing
Protection Must Be Worn
450 x 600 Metal
44200246 Foot Protection Must Be Worn 450 x 600 Metal
44200249 No Vest No Entry 450 x 600 Metal
44200250 Safety Harness Must Be Worn 225 x 300 Polypropylene
44200252
These Protective Items Must Be
Worn 4 Discs 900 x 600 Metal
900 x 600 Metal
WWW.BULLIVANTS.COM 297
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
AS1319 Danger Signs: Unit of Measure - Each
in white letters on a red oval inside a black background. These signs should be used in LIFE THREATENING CONDITIONS.
OR
DER
CO
DE
Des
crip
tion
Size
(mm
)
Mat
eria
ls
44200234 Danger Hi Voltage 450 x 600 Metal
44200238 Danger Keep Out 450 x 600 Polypropylene
44200243 Danger Workers Above 450 x 600 Metal
44200229 Danger explosive Tools In Use 450 x 600 Metal
44200241 Danger Scaffolding Incomplete 450 x 600 Metal
44200240 Danger No Admittance 450 x 600 Metal
44200227 Danger Do Not Enter 450 x 600 Metal
AS1319 Prohibition Signs: Unit of Measure - Each
with a red annulus and slash symbol. They depict actions/ activities that are not permitted.
OR
DER
CO
DE
Des
crip
tion
Size
(mm
)
Mat
eria
ls
44200258No Entry
Authorised Personnel Only
450 X 600 Metal
44200265 No Smoking 450 X 600 Metal
44200260 No Pedestrian Access 450 X 600 Metal
44200329 Do Not Use Mobile Phones 225 X 300 Metal
44200331 No Food Or Drink 225 X 300 Polypropylene
44200335No Smoking Beyond This
Point450 x 600 Metal
AS1319 Safety/Emergency Signs: Unit of Measure - Each
rectangle with a white symbol and test with a white enclosure.
equipment. They should also show where the emergency facilities are located.
OR
DER
CO
DE
Des
crip
tion
Size
(mm
)
Mat
eria
ls
44200338 Emergency Assembly Point 450 x 600 Metal
44200340 Emergency Eyewash 450 x 600 Metal
44200346 First Aid 450 x 600 Metal
44200348 MSDS Located Here 225 x 300 Metal
AS1216-1995 Hazchem Signs: Unit of Measure - Each
Dangerous Goods Code and various state government
OR
DER
CO
DE
Des
crip
tion
Size
(mm
)
Mat
eria
ls
44200299 Hazchem 125 x 600 Metal
44200301Hazchem Explosive Diamond
250 X 250 Metal
44200304Hazchem
Flammable Gas Diamond
250 x 250 Metal
44200306Hazchem Non
Flammable Diamond
250 x 250 Metal
44200308Hazchem Toxic Gas Diamond
250 x 250 Metal
44200310Hazchem
Oxidising Gas Diamond
250 x 250 Metal
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
1300 722 999298
AS1319 Warning/Caution Signs: Unit of Measure - Each
NOT LIKELY TO BE LIFE THREATENING. These signs serve as a warning. The symbol used is a yellow equilateral triangle with a black enclosure.
OR
DER
CO
DE
Des
crip
tion
Size
(mm
)
Mat
eria
ls
44200295 Forklifts In Use 450 x 600 Metal
44200297 Stack Correctly 450 x 600 Polypropylene
44200271Electric Arc Welding In This Area
450 x 600 Metal
Fire Safety: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
Wei
ght (
kg)
44170093 Abe Dry Powder 1
44170097 Abe Dry Powder Complete With Wall Bracket 2.5
44170098 Vehicle Abe Dry Powder 2.5
44170092 Abe Dry Powder 4.5
44170094 Abe Dry Powder 9
Fire Blankets: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
44170102 1m x 1m Fire Blanket
44170101 1.2m x 1.2m Fire Blanket
44170104 1.2m x 1.8m Fire Blanket
First AidSmall to Medium Workplaces: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
44200549 First Aid Kit 1-25 New South Wales
44200550 First Aid Kit 1-25 Victoria
44200553 First Aid Kit 1-25 Western Australia
44200554 First Aid Kit 1-25 Tasmania
44200555 First Aid kit 1-25 Australian Capital Territory ‘B’
44200556 First Aid Kit 1-25 Northern Territory
44200551 First Aid Kit 1-30 Queensland
44200552 First Aid Kit 1-50 South Australia
WWW.BULLIVANTS.COM 299
10 -
PE
RS
ON
AL
PR
OT
EC
TIO
N E
QU
IPM
EN
T
Medium to Large Workplaces: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
44200557 First Aid Kit NSW ‘A’ up to 100
44200558 First Aid Kit 26-100 Victoria
44200559 First Aid Kit 31-100 Queensland
44200560 First aid Kit South Australia Occupational up to 100
44200561 First Aid Kit 26-100 Western Australia
44200562 First Aid Kit 26-100 Tasmania
44200563 First Aid Kit ACT ‘A’ up to 100
44200564 First Aid Kit 26-100 Northern Territory
First Aid Kits: Unit of Measure - Each
OR
DER
CO
DE
Des
crip
tion
44200565 First Aid Kit Portable
44200566 First Aid Kit Emergency Response
44200567 First Aid Kit Personal/Vehicle
44200568 First Aid Kit Vehicle Deluxe
44200569 First Aid Kit Emergency Burns