Upload
evangeline-jasmin-conley
View
212
Download
0
Tags:
Embed Size (px)
Citation preview
1
Turning Brake DrumsTurning Brake Drums
Introduction and pre-checksIntroduction and pre-checks Lab demonstrationLab demonstration Lab student practice -- turning Lab student practice -- turning
drumsdrums Classroom wrap-upClassroom wrap-up
2
Cracked brake drumCracked brake drum
3
ScoringScoring
4
Hard spotsHard spots
5
Grease-stainedGrease-stained
6
High-heat conditionsHigh-heat conditions
7
Heat checkingHeat checking
8
Out-of-roundOut-of-round
9
Rule of thumb for turning Rule of thumb for turning drum:drum:
““Only turn if major imperfections or Only turn if major imperfections or out-of-round condition.”out-of-round condition.”
10
The four prechecks:The four prechecks:
11
The four prechecks:The four prechecks:
CracksCracks
12
The four prechecks:The four prechecks:
CracksCracks
ScoringScoring
13
The four prechecks:The four prechecks:
CracksCracks
ScoringScoring
Hard sportsHard sports
14
The four prechecks:The four prechecks:
CracksCracks
ScoringScoring
Hard spotsHard spots
Drum max Drum max diameterdiameter
15
Parts of brake drum latheParts of brake drum lathe
ArborArbor
16
Parts of brake drum latheParts of brake drum lathe
ArborArbor Adapter cups and conesAdapter cups and cones
17
Parts of brake drum latheParts of brake drum lathe
ArborArbor Adapter cups and conesAdapter cups and cones Special bearing race adaptersSpecial bearing race adapters
18
Parts of brake drum latheParts of brake drum lathe
ArborArbor Adapter cups and conesAdapter cups and cones Special bearing race adaptersSpecial bearing race adapters Carbide cutting bitCarbide cutting bit
19
Mounting the brake drumMounting the brake drum
Correct adaptersCorrect adapters
20
Mounting a brake drumMounting a brake drum
Correct adaptersCorrect adapters Rubber-centered sleeveRubber-centered sleeve
21
Mounting a brake drumMounting a brake drum
Correct adaptersCorrect adapters Rubber-centered sleeveRubber-centered sleeve Silencing bandSilencing band
22
Surfacing the drumSurfacing the drum
Light glaze? Use #80-grit Light glaze? Use #80-grit sandpapersandpaper
23
Surfacing the drumSurfacing the drum
Light glaze? Use #80-grit Light glaze? Use #80-grit sandpapersandpaper
Remove as little as possibleRemove as little as possible
24
Surfacing the drumSurfacing the drum
Light glaze? Use #80-grit Light glaze? Use #80-grit sandpapersandpaper
Remove as little as possibleRemove as little as possible
Two cuts: ‘Rough’ followed by Two cuts: ‘Rough’ followed by ‘finish’‘finish’
25
Surfacing the drumSurfacing the drum
Light glaze? Use #80-grit sandpaperLight glaze? Use #80-grit sandpaper
Remove as little as possibleRemove as little as possible
Two cuts: ‘Rough’ followed by ‘finish’Two cuts: ‘Rough’ followed by ‘finish’
#80-grit sandpaper final finish#80-grit sandpaper final finish
26
What’s next?What’s next?
Continue on brake technologyContinue on brake technology
Prepare for ASE certificationPrepare for ASE certification
27