Upload
ernest-curtis
View
217
Download
0
Tags:
Embed Size (px)
Citation preview
1
Topographic Maps
Show the shape of the Earth’s surface.
2
A topographic map of part of Ithaca
3
4
List three situations when you might use a topographic map instead
of a road map.
5
Contour Lines
• As contour lines become further apart… – The gradient decreases – not steep
• As contour lines become more closely spaced…– The gradient increases - steep
6
Contour Lines
• Closed contours appearing on a map as ellipses or circles represent hills or knolls
• Closed contours with hachures represent depressions
7
What is the pattern of the contour lines around a simple hill?
Concentric circles getting smaller - hill
8
Identify the features marked at A and B
9
Hachure contour lines (lines with tick marks) show depressions – the first hachure is equal to the last contour line passed
20 2010
10
WHAT DOES THIS PROFILE SHOW?
VOLCANO
NOTICE HACHURE DEPRESSION LINES IN CENTER SHOWING VOLCANIC VENT
11
Contour Lines
• Contour lines don’t cross each other– Although at a vertical
cliff they may be on top of one another
• Where contour lines cross streams and rivers they have a v-shape and the v points upstream
12
Contour Interval• The elevation change between
contour lines is the Contour Interval
• The vertical distance that separates each contour line on a topographic map
• The contour interval is stated on each map
13
Contour Interval What is the contour interval on this map?
14
Index Contour Lines
• These are heavy lines spaced at predetermined elevations on a topographic map
• Are usually labeled with a number somewhere along the line
What might you use index contours for?
15
Index contour lines are placed every 50 units on this map
16
What is the spacing of Index Contours on this map?
What is the contour interval?
17
Map Symbols • The United States
Geological Survey (USGS) uses the same map symbols on every map.
• Most USGS maps do not have a key – you need to provide your own!
18
Colors on Topographic Maps
– Blue stands for water– Green stands for forested areas or woods
• Green dots lined up in rows show an orchard
– Black is human-made structures– Pink stands for high population areas–White stands for non-wooded areas– Red represents for highways– Brown indicates contour lines
19
Map Scale
• The relationship between distance as measured on a map and the actual distance on Earth’s surface– One of any unit on this map represents 24,000 of the same unit on Earth’ s surface
20
• Maps often give you more than one way to measure distance
Represents one mile on the map
Represents parts of one mile, ex: one tenth of a mile
One kilometer
21
Known Elevations– Places of known elevation are shown with the
abbreviation “BM”• BM stands for benchmark• An “X” and elevation number might appear
with the BM• BM, X and the elevation are written in
BLACK• Benchmarks are set in concrete and checked
periodically by the USGS
22
This is what a Benchmark looks like.
Extra Credit: bring in a “rubbing” from a local benchmark.
23
Maximum Elevation of a Hill
Steps to follow:
1. Count up the contour lines using the contour interval.
2. Pretend that there is one more contour line at the top of the hill (imaginary line).
3. Subtract 1
24
25
26
So, if we were to look at a profile view of line AB on our
topographic map, what might we expect to see? Predictions?
Time to FIND OUT!
Step 2
27
28
29
30
31
32
33
Make the X-axis exactly as long as line AB.
34
Next, decide what the HIGHEST and LOWEST elevation values are that line AB crosses on your topographic map and create a scale. You may wish to increase your scale by the contour interval on the map to make things easier. In this case, we are going up by 10’s, because our contour interval on the map is 10 meters.
35
36
Hold your scrap paper page up to the profile.
37
Transfer the tick marks directly onto the profile.
38
39
40
41
42
43
This is what This is what you might you might expect the expect the “profile” or “profile” or cross section cross section view of line view of line AB to look AB to look like! like! Notice how Notice how the line dips the line dips below 250m below 250m where it where it crosses Long crosses Long CreekCreek
44
Does it make sense? SURE! There is a creek flowing through this region. Think about where it would flow on your profile. We also recognize the V shaped contour lines that indicate the direction of water flow.
45
The contour lines point up the page (orange), but Long Creek flows down the page.
46
Contour lines point upstream. Stream flows from high elevation to low
elevation. So a stream flows in the oppostite direction the contours point.
47
CONTOUR LINES BEND WHEN CROSS STREAMS
UPSIDE DOWN V’S POINT UPSTREAM STREAMS FLOW DOWN