Upload
danish-naeem-lambe
View
215
Download
0
Embed Size (px)
Citation preview
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
1/30
The Non-transparent standard series solar module technical datasheet
1. Product DASSTNT-001.1 Module specification
Items Specification
Product type Standard series solar module
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Non-transparent
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mm
The thickness of module (Not including junction box ) 7.9mm
0.8mm
Module frame No
Module weight 26kg2kg
Junction
Box
Type Cassette type
Junction box length 64.4mm
Junction box width 64mm
Junction box thickness 19mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 1000mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
2/30
Items Composition Name Material Thickness(mm)
a Cell panel ASXS 3.20.2mm
b electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASSTNT-00-90 90 119.38 1.39 86.54 1.04
DASSTNT-00-95 95 119.67 1.41 88.37 1.08
DASSTNT-00-100 100 119.9 1.42 88.63 1.13
DASSTNT-00-105 105 120.14 1.44 89.74 1.17
DASSTNT-00-110 110 120.36 1.47 90.91 1.21
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3%
The biggest
over-current
protection value
3A
Temperaturecoefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2. Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
3/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3. Product warranty
3.1 The module with 5 years maintenance service warranty (date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90% power
output, 25 years performance guarantee at 80% power output
4. Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less than
1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module must
be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure it is
in waterproof condition, to void too much moisture accumulation in junction box or
submerged in water.4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
4/30
The 20% Full Pervious transparent standard series solar module
technical datasheet
1. Product DASSTFP-20
1.1 Module specification
Items Specification
Product type Standard series solar module
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Full pervious
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mm
The thickness of module (Not including junction box ) 7.9mm0.8mmModule frame No
Module weight 26kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 600mm10mmCross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
5/30
Items Composition Name Material Thickness(mm)
a Cell panel ASB4 3.20.2mm
b electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASSTFP-20-75 75 143.27 0.88 104.17 0.72
DASSTFP-20-80 80 143.75 0.90 106.68 0.75
DASSTFP-20-85 85 144.14 0.93 108.98 0.78
DASSTFP-20-90 90 144.52 0.95 111.12 0.81
DASSTFP-20-95 95 144.94 0.97 114.46 0.83
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperaturecoefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2 Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
6/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3 Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4 Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure itis in waterproof condition, to void too much moisture accumulation in junction box or
submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
7/30
The 20% Half Pervious transparent standard series solar module
technical datasheet
1. Product DASSTHP-20
1.1 Module specification
Items Specification
Product type Standard series solar module
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Half pervious
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mm
The thickness of module (Not including junction box ) 7.9mm0.8mmModule frame No
Module weight 26kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 1000mm10mmCross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
8/30
Items Composition Name Material Thickness(mm)
a Cell panel ASC4 3.20.2mm
b Electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASSTHP-20-65 65 118.45 1.03 84.43 0.77
DASSTHP-20-70 70 118.68 1.06 87.52 0.80
DASSTHP-20-75 75 118.91 1.08 90.37 0.83
DASSTHP-20-80 80 119.12 1.11 91.96 0.87
DASSTHP-20-85 85 119.35 1.14 93.41 0.91
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperaturecoefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2. Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
9/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3. Product warranty
3.1 The module with 5 years maintenance service warranty (date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4. Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure itis in waterproof condition, to void too much moisture accumulation in junction box or
submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
10/30
The 20% Full Pervious transparent jumbo series solar module technical
datasheet
1. Product DASJBFP-20
1.1 Module specification
Items Specification
Product type Jumbo series solar module/ three glass layer
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Full pervious
Light transmittance 20%
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mmThe thickness of module (Not including junction box ) 22mm1mm
Module frame No
Module weight 55kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 600mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
11/30
Items Composition Name Material Thickness(mm)
a Cell panel ASB4 3.20.2mm
b electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
e Interval material Aluminum frame 90.2mm
f Glass-2 Tempered glass 50.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASJBFP-20-75 75 143.27 0.88 104.17 0.72
DASJBFP-20-80 80 143.75 0.90 106.68 0.75
DASJBFP-20-85 85 144.14 0.93 108.98 0.78
DASJBFP-20-90 90 144.52 0.95 111.12 0.81
DASJBFP-20-95 95 144.94 0.97 114.46 0.83
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-currentprotection value
3A
Temperature
coefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2. Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
12/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3. Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4. Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure itis in waterproof condition, to void too much moisture accumulation in junction box or
submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
13/30
The 20% Full Pervious transparent Mega Series solar module
technical datasheet
1. Product DASMGFP-20
1.1 Module specification
Items Specification
Product type Mega Series solar module/ three
glass layer
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Full pervious
Light transmittance 20%
The length of module (Not including junction box ) 1300mm2mmThe width of module (Not including junction box ) 1100mm2mm
The thickness of module (Not including junction box ) 14.7mm1mm
Module frame No
Module weight 55kg2kg
JunctionBox
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode IncludingWaterproof level IP65
Output
wires
Length (including terminal block) 600mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
14/30
Items Composition Name Material Thickness(mm)
A Glass-1 Tempered glass 50.2mm
B encapsulating material PVB 0.760.2mm
C Cell panel ASB4 3.20.2mm
D electrode plain conductor 0.1mm0.01mm
E encapsulating material PVB 0.760.2mm
F Glass-2 Tempered glass 50.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASMGFP-20-70 70 142.78 0.86 101.45 0.69
DASMGFP-20-75 75 143.27 0.88 104.17 0.72
DASMGFP-20-80 80 143.75 0.90 106.68 0.75
DASMGFP-20-85 85 144.14 0.93 108.98 0.78
DASMGFP-20-90 90 144.52 0.95 111.12 0.81
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperature
coefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2 Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
15/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3 Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4 Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure itis in waterproof condition, to void too much moisture accumulation in junction box or
submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
16/30
The 25% Full Pervious transparent Mega series solar module
technical datasheet
1. Product DASMGFP-25
1.1 Module specification
Items Specification
Product type Mega series solar module/ three
glass layer
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Full pervious
Light transmittance 25%
The length of module (Not including junction box ) 1300mm2mmThe width of module (Not including junction box ) 1100mm2mm
The thickness of module (Not including junction box ) 14.7mm1mm
Module frame No
Module weight 55kg2kg
JunctionBox
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode IncludingWaterproof level IP65
Output
wires
Length (including terminal block) 600mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
17/30
Items Composition Name Material Thickness(mm)
a Glass-1 Tempered glass 50.2mm
b encapsulating material PVB 0.760.2mm
c Cell panel ASB4 3.20.2mm
d Electrode plain conductor 0.1mm0.01mm
e encapsulating material PVB 0.760.2mm
f Glass-2 Tempered glass 50.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASMGFP-25-65 65 131.35 0.78 101.57 0.64
DASMGFP-25-70 70 134.23 0.82 112.95 0.68
DASMGFP-25-75 75 137.99 0.85 115.64 0.71
DASMGFP-25-80 80 141.15 0.87 109.59 0.73
DASMGFP-25-85 85 144.51 0.89 111.85 0.76
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperature
coefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2 Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
18/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3 Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4 Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure
it is in waterproof condition, to void too much moisture accumulation in junction box
or submerged in water.
4.6 The negative of solar power system must connect with ground, or else the modulecan not be maintenance during the warranty period. The detailed installation of
ground connect system should meet the local electrical system regulations. If there is
any other connect ground system queries, please contact the sales agency or
DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
19/30
The 10% half Pervious transparent Mega series solar module
technical datasheet
1. Product DASMGHP-10
1.1 Module specification
Items Specification
Product type Mega series solar module/ three glass layer
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Half pervious
Light transmittance 10%
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mmThe thickness of module (Not including junction box ) 14.7mm1mm
Module frame No
Module weight 55kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 600mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
20/30
Items Composition Name Material Thickness(mm)
a Glass-1 Tempered glass 50.2mm
b encapsulating material PVB 0.760.2mm
c Cell panel ASB4 3.20.2mm
d Electrode plain conductor 0.1mm0.01mm
e encapsulating material PVB 0.760.2mm
f Glass-2 Tempered glass 50.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASMGHP-10-55 55 118.14 1.01 69.75 0.79
DASMGHP-10-60 60 118.39 1.03 71.43 0.84
DASMGHP-10-65 65 118.62 1.06 74.72 0.87
DASMGHP-10-70 70 118.85 1.08 78.66 0.89
DASMGHP-10-75 75 119.08 1.11 81.53 0.92
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperature
coefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2 Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
21/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3 Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4 Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure it
is in waterproof condition, to void too much moisture accumulation in junction box orsubmerged in water.
4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
22/30
The 10% half Pervious transparent jumbo series solar module
technical datasheet
1. Product DASJBHP-10
1.1 Module specification
Items Specification
Product type Jumbo series solar module/ three glass layer
Type of Solar Cell A-Si thin film / unijunction
Module transmitting performance Half pervious
Light transmittance 10%
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mmThe thickness of module (Not including junction box ) 22mm1mm
Module frame No
Module weight 55kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 600mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
23/30
Items Composition Name Material Thickness(mm)
a Cell panel ASC2 3.20.2mm
b Electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
e Interval material Aluminum frame 90.2mm
f Glass-2 Tempered glass 50.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASJBHP-10-75 75 119.08 1.11 81.53 0.92
DASJBHP-10-80 80 119.32 1.14 83.34 0.96
DASJBHP-10-85 85 119.57 1.18 85.86 0.99
DASJBHP-10-90 90 119.81 1.21 90.12 1.01
DASJBHP-10-95 95 120.03 1.24 92.24 1.03
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperature
coefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2. Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
24/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3. Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90% power
output, 25 years performance guarantee at 80% power output
4. Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less than
1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module must
be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure it isin waterproof condition, to void too much moisture accumulation in junction box or
submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module can
not be maintenance during the warranty period. The detailed installation of ground
connect system should meet the local electrical system regulations. If there is any
other connect ground system queries, please contact the sales agency or DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
25/30
The 25% Full Pervious transparent standard series solar module
technical datasheet
1. Product DASSTFP-25
1.1 Module specification
Items Specification
Product type Standard series solar module
Type of Solar Cell A-Si thin film / uni junction
Module transmitting performance Full pervious
light transmittance 25%
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mmThe thickness of module (Not including junction box ) 7.9mm0.8mm
Module frame No
Module weight 26kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 600mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
26/30
Items Composition Name Material Thickness(mm)
a Cell panel ASB5 3.20.2mm
b Electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASSTFP-25-70 70 134.23 0.82 112.95 0.68
DASSTFP-25-75 75 137.99 0.85 115.64 0.71
DASSTFP-25-80 80 141.15 0.87 109.59 0.73
DASSTFP-25-85 85 144.51 0.89 111.85 0.76
DASSTFP-25-90 90 144.94 0.91 113.93 0.79
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperaturecoefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2 Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
27/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3 Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4 Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off
4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insureit is in waterproof condition, to void too much moisture accumulation in junction box
or submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module
can not be maintenance during the warranty period. The detailed installation of
ground connect system should meet the local electrical system regulations. If there is
any other connect ground system queries, please contact the sales agency or
DASSSPL.
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
28/30
The 10% Half Pervious transparent standard series solar module
technical datasheet
1. Product DASSTHP-10
1.1 Module specification
Items Specification
Product type Standard series solar module
Type of Solar Cell A-Si thin film / unijunction
Module transmitting performance Half pervious
Light transmittance 10%
The length of module (Not including junction box ) 1300mm2mm
The width of module (Not including junction box ) 1100mm2mmThe thickness of module (Not including junction box ) 7.9mm0.8mm
Module frame No
Module weight 26kg2kg
Junction
Box
Type Cassette type
Junction box length 87.6mm
Junction box width 13.5mm
Junction box thickness 11.6mm
Bypass diode Including
Waterproof level IP65
Output
wires
Length (including terminal block) 1000mm10mm
Cross sectional area 2.5mm2
Working temperature -40~85
Working rated voltage 1000V D.C.
Terminal block type MC4 compatible
The biggest load of module 2400Pa
1.2 Product composition
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
29/30
Items Composition Name Material Thickness(mm)
a Cell panel ASC2 3.20.2mm
b Electrode plain conductor 0.1mm0.01mm
c encapsulating material PVB 0.760.2mm
d Glass Tempered glass 40.2mm
1.3 Electrical Specification
Items Power (Wp) Open-circuit
voltage (V)
Short-circuit
current(A)
Peak
voltage(V)
Peak
current(A)
DASSTHP-10-75 75 119.08 1.11 81.53 0.92
DASSTHP-10-80 80 119.32 1.14 83.34 0.96
DASSTHP-10-85 85 119.57 1.18 85.86 0.99
DASSTHP-10-90 90 119.81 1.21 90.12 1.01
DASSTHP-10-95 95 120.03 1.24 92.24 1.03
The biggest system
working voltage
1000V D.C. (TUV); 600V D.C. (UL)
Power tolerance 3.0%
The biggest
over-current
protection value
3A
Temperature
coefficient
Isc: +0.08%/; Voc: -0.30%/; Pmpp: -0.23%/
The standard test
condition
1000W/m2, AM1.5, 25
2. Product Performance characteristics
2.1 Temperature coefficient curve
The Temperature coefficient curve of product is as follows:
7/30/2019 1-The Solar Module Technical Datasheet (DASSSPL)
30/30
2.2 The I-V curve under different illumination index
The I-V curve under different illumination index is as follows:
3. Product warranty
3.1 The module with 5 years maintenance service warranty( date is started from the
delivery )
3.2 The warranty of biggest output power: 10 years performance guarantee at 90%
power output, 25 years performance guarantee at 80% power output
4. Product operation specifications
4.1 Module installation position should be no shady perennial.
4.2 Module should avoid seawater immersion and snow cover(Snow depth should less
than 1M).
4.3 The working ambient temperature of Module is -40~854.4 The Module can be installed in vertical or horizontal, but the installation of module
must be firm, prevent fall off4.5 The junction box of module meet IP65 standard in IEC 60529, but we should insure
it is in waterproof condition, to void too much moisture accumulation in junction box
or submerged in water.
4.6 The negative of solar power system must connect with ground, or else the module
can not be maintenance during the warranty period. The detailed installation of
ground connect system should meet the local electrical system regulations. If there is
any other connect ground system queries, please contact the sales agency or
DASSSPL.