Upload
blaze-carpenter
View
215
Download
0
Embed Size (px)
Citation preview
11The Chemistry The Chemistry of Acids and of Acids and BasesBases
The Chemistry The Chemistry of Acids and of Acids and BasesBases Chemistry I – Chapter 19Chemistry I – Chapter 19
55Acids
Have a sour taste. Vinegar is a solution of acetic acid. CitrusHave a sour taste. Vinegar is a solution of acetic acid. Citrusfruits contain citric acid.fruits contain citric acid.
React with certain metals to produce hydrogen gasReact with certain metals to produce hydrogen gas..
React with carbonates and bicarbonates to produce carbon React with carbonates and bicarbonates to produce carbon dioxide gasdioxide gas
Have a bitter taste.Have a bitter taste.
Feel slippery. Many soaps contain bases.Feel slippery. Many soaps contain bases.
Bases
66
Some Properties of Acids
Produce H+ (as H3O+) ions in water (the hydronium ion is a
hydrogen ion attached to a water molecule)
Taste sour
Corrode metals
Electrolytes
React with bases to form a salt and water
pH is less than 7
Turns blue litmus paper to red “Blue to Red A-CID”
77
Anion Ending Acid Name
-ide hydro-(stem)-ic acid
-ate (stem)-ic acid
-ite (stem)-ous acid
Acid Nomenclature Review
No OxygenNo Oxygen
w/Oxygen w/Oxygen
An easy way to remember which goes with which…An easy way to remember which goes with which…
““In the cafeteria, you In the cafeteria, you ATEATE something something ICICky”ky”
88
• HBr HBr (aq)(aq)
• HH22COCO33
• HH22SOSO33
hydrohydrobromicbromic acidacid
carboncarbonicic acidacid
sulfursulfurousous acidacid
Acid Nomenclature Review
1010
Some Properties of Bases
Produce OHProduce OH-- ions in water ions in water
Taste bitter, chalkyTaste bitter, chalky
Are electrolytesAre electrolytes
Feel soapy, slipperyFeel soapy, slippery
React with acids to form salts and waterReact with acids to form salts and water
pH greater than 7pH greater than 7
Turns red litmus paper to blue “Turns red litmus paper to blue “BBasic asic BBlue”lue”
1111
Some Common Bases
NaOHNaOH sodium hydroxidesodium hydroxide lyelye
KOHKOH potassium hydroxidepotassium hydroxide liquid soapliquid soap
Ba(OH)Ba(OH)22 barium hydroxidebarium hydroxide stabilizer for plasticsstabilizer for plastics
Mg(OH)Mg(OH)22 magnesium hydroxidemagnesium hydroxide “MOM” Milk of magnesia“MOM” Milk of magnesia
Al(OH)Al(OH)33 aluminum hydroxidealuminum hydroxide Maalox (antacid)Maalox (antacid)
1212
Acid/Base definitions
• Definition #1: Arrhenius (traditional)
Acids – produce H+ ions (or hydronium ions H3O+)
Bases – produce OH- ions
(problem: some bases don’t have hydroxide ions!)
1313Arrhenius acid is a substance that produces H+ (H3O+) in water
Arrhenius base is a substance that produces OH- in water
1414
Acid/Base Definitions
• Definition #2: Brønsted – Lowry
Acids – proton donor
Bases – proton acceptor
A “proton” is really just a hydrogen atom that has lost it’s electron!
1515
A Brønsted-Lowry acid is a proton donorA Brønsted-Lowry base is a proton acceptor
acidconjugate
basebase conjugate
acid
1616
ACID-BASE THEORIESACID-BASE THEORIESACID-BASE THEORIESACID-BASE THEORIES
The Brønsted definition means NHThe Brønsted definition means NH33 is is aa BASEBASE in water — and water is in water — and water is itself anitself an ACIDACID
BaseAcidAcidBaseNH4
+ + OH-NH3 + H2OBaseAcidAcidBase
NH4+ + OH-NH3 + H2O
1818
Learning Check!
Label the acid, base, conjugate acid, and Label the acid, base, conjugate acid, and conjugate base in each reaction:conjugate base in each reaction:
HCl + OHHCl + OH-- Cl Cl-- + H + H22OO HCl + OHHCl + OH-- Cl Cl-- + H + H22OO
HH22O + HO + H22SOSO44 HSO HSO44-- + H + H33OO
++ HH22O + HO + H22SOSO44 HSO HSO44-- + H + H33OO
++
1919Acids & Base Acids & Base DefinitionsDefinitions
Lewis acid - a Lewis acid - a substance that substance that accepts an electron accepts an electron pairpair
Lewis base - a Lewis base - a substance that substance that donates an electron donates an electron pairpair
Definition #3 – Lewis Definition #3 – Lewis
2020
Formation ofFormation of hydronium ion hydronium ion is also an is also an excellent example.excellent example.
Lewis Acids & BasesLewis Acids & Bases
•Electron pair of the new O-H bond Electron pair of the new O-H bond originates on the Lewis base.originates on the Lewis base.
HH
H
BASE
••••••
O—HO—H
H+
ACID
2222
Lewis Acid-Base Lewis Acid-Base Interactions in BiologyInteractions in Biology
• The heme group The heme group in hemoglobin in hemoglobin can interact with can interact with OO22 and CO. and CO.
• The Fe ion in The Fe ion in hemoglobin is a hemoglobin is a Lewis acidLewis acid
• OO22 and CO can act and CO can act as Lewis basesas Lewis bases
Heme group
2323The The pH scalepH scale is a way of is a way of expressing the strength expressing the strength of acids and bases. of acids and bases. Instead of using very Instead of using very small numbers, we just small numbers, we just use the NEGATIVE use the NEGATIVE power of 10 on the power of 10 on the Molarity of the HMolarity of the H++ (or (or OHOH--) ion.) ion.
Under 7 = acidUnder 7 = acid 7 = neutral 7 = neutral
Over 7 = baseOver 7 = base
2525Calculating the pH
pH = - log [H+]([ ] mean Molarity)
Example: If [H+] = 1 X 10-10
pH = - log 1 X 10-10
pH = - (- 10)
pH = 10
Example: If [H+] = 1.8 X 10-5
pH = - log 1.8 X 10-5
pH = - (- 4.74)
pH = 4.74
2626
Try These!Try These!
Find the pH of Find the pH of these:these:
1) A 0.15 M solution 1) A 0.15 M solution of Hydrochloric of Hydrochloric acidacid
2) A 3.00 X 102) A 3.00 X 10-7-7 M M solution of Nitric solution of Nitric acidacid
2727pH calculations – Solving for pH calculations – Solving for H+H+pH calculations – Solving for pH calculations – Solving for H+H+
If the pH of Coke is 3.12, [HIf the pH of Coke is 3.12, [H++] = ???] = ???
Because pH = - log [HBecause pH = - log [H++] then] then
- pH = log [H- pH = log [H++]]
Take antilog (10Take antilog (10xx) of both) of both sides and get sides and get
1010-pH -pH == [H[H++]][H[H++] = 10] = 10-3.12-3.12 = 7.6 x 10 = 7.6 x 10-4-4 M M *** to find antilog on your calculator, look for “Shift” or “2*** to find antilog on your calculator, look for “Shift” or “2nd nd
function” and then the log buttonfunction” and then the log button
2828pH calculations – Solving for pH calculations – Solving for H+H+
• A solution has a pH of 8.5. What is the A solution has a pH of 8.5. What is the Molarity of hydrogen ions in the Molarity of hydrogen ions in the solution?solution?
pH = - log [HpH = - log [H++]]
8.5 = - log [H8.5 = - log [H++]]
-8.5 = log [H-8.5 = log [H++]]
Antilog -8.5 = antilog (log [HAntilog -8.5 = antilog (log [H++])])
1010-8.5-8.5 = [H = [H++]]
3.16 X 103.16 X 10-9-9 = [H = [H++]]
pH = - log [HpH = - log [H++]]
8.5 = - log [H8.5 = - log [H++]]
-8.5 = log [H-8.5 = log [H++]]
Antilog -8.5 = antilog (log [HAntilog -8.5 = antilog (log [H++])])
1010-8.5-8.5 = [H = [H++]]
3.16 X 103.16 X 10-9-9 = [H = [H++]]
2929pOH
• Since acids and bases are Since acids and bases are opposites, pH and pOH are opposites, pH and pOH are opposites!opposites!
• pOH does not really exist, but it is pOH does not really exist, but it is useful for changing bases to pH.useful for changing bases to pH.
• pOH looks at the perspective of a pOH looks at the perspective of a basebase
pOH = - log [OHpOH = - log [OH--]]Since pH and pOH are on opposite Since pH and pOH are on opposite
ends,ends,pH + pOH = 14pH + pOH = 14
3131
[H[H33OO++], [OH], [OH--] and pH] and pHWhat is the pH of the What is the pH of the
0.0010 M NaOH solution? 0.0010 M NaOH solution?
[OH-] = 0.0010 (or 1.0 X 10[OH-] = 0.0010 (or 1.0 X 10-3-3 M) M)
pOH = - log 0.0010pOH = - log 0.0010
pOH = 3pOH = 3
pH = 14 – 3 = 11pH = 14 – 3 = 11
OR KOR Kww = [H = [H33OO++] [OH] [OH--]]
[H[H3OO++] = 1.0 x 10] = 1.0 x 10-11-11 M M
pH = - log (1.0 x 10pH = - log (1.0 x 10-11-11) = 11.00) = 11.00
3232The pH of rainwater collected in a certain region of the northeastern United States on a particular day was 4.82. What is the H+ ion concentration of the rainwater?
The OH- ion concentration of a blood sample is 2.5 x 10-7 M. What is the pH of the blood?
3333Calculating [H3O+], pH, [OH-], and pOH
Problem 1: A chemist dilutes concentrated hydrochloric acid to make two solutions: (a) 3.0 M and (b) 0.0024 M. Calculate the [H3O+], pH, [OH-], and pOH of the two solutions at 25°C.
Problem 2: What is the [H3O+], [OH-], and pOH of a solution with pH = 3.67? Is this an acid, base, or neutral?
Problem 3: Problem #2 with pH = 8.05?
3434pH testing
• There are several ways to test pHThere are several ways to test pH
–Blue litmus paper (red = acid)Blue litmus paper (red = acid)
–Red litmus paper (blue = basic)Red litmus paper (blue = basic)
–pH paper (multi-colored)pH paper (multi-colored)
–pH meter (7 is neutral, <7 acid, >7 pH meter (7 is neutral, <7 acid, >7 base)base)
–Universal indicator (multi-colored)Universal indicator (multi-colored)
– Indicators like phenolphthaleinIndicators like phenolphthalein
–Natural indicators like red cabbage, Natural indicators like red cabbage, radishesradishes
3535Paper testing
• Paper tests like litmus paper and pH Paper tests like litmus paper and pH paperpaper
– Put a stirring rod into the solution Put a stirring rod into the solution and stir.and stir.
– Take the stirring rod out, and Take the stirring rod out, and place a drop of the solution from place a drop of the solution from the end of the stirring rod onto a the end of the stirring rod onto a piece of the paperpiece of the paper
– Read and record the color change. Read and record the color change. Note what the color indicates. Note what the color indicates.
– You should only use a small You should only use a small portion of the paper. You can use portion of the paper. You can use one piece of paper for several one piece of paper for several tests.tests.
3737
pH meter
• Tests the voltage of the Tests the voltage of the electrolyteelectrolyte
• Converts the voltage to Converts the voltage to pHpH
• Very cheap, accurateVery cheap, accurate
• Must be calibrated with Must be calibrated with a buffer solutiona buffer solution
3838pH indicators
• Indicators are dyes that can be added that will change color in the presence of an acid or base.
• Some indicators only work in a specific range of pH
• Once the drops are added, the sample is ruined
• Some dyes are natural, like radish skin or red cabbage
3939
ACID-BASE REACTIONSACID-BASE REACTIONSTitrationsTitrations
ACID-BASE REACTIONSACID-BASE REACTIONSTitrationsTitrations
HH22CC22OO44(aq) + 2 NaOH(aq) --->(aq) + 2 NaOH(aq) --->
acidacid basebase
NaNa22CC22OO44(aq) + 2 H(aq) + 2 H22O(liq)O(liq)
Carry out this reaction using aCarry out this reaction using a TITRATIONTITRATION..
Oxalic acid,Oxalic acid,
HH22CC22OO44
4141
TitrationTitrationTitrationTitration
1. Add solution from the buret.1. Add solution from the buret.2. Reagent (base) reacts with 2. Reagent (base) reacts with
compound (acid) in solution compound (acid) in solution in the flask.in the flask.
3.3. Indicator shows when exact Indicator shows when exact stoichiometric reaction has stoichiometric reaction has occurred. (Acid = Base)occurred. (Acid = Base)
This is called This is called NEUTRALIZATION.NEUTRALIZATION.
4242
35.62 mL of NaOH is 35.62 mL of NaOH is
neutralized with 25.2 mL of neutralized with 25.2 mL of
0.0998 M HCl by titration to 0.0998 M HCl by titration to
an equivalence point. What an equivalence point. What
is the concentration of the is the concentration of the
NaOH?NaOH?
LAB PROBLEM #1: Standardize a LAB PROBLEM #1: Standardize a solution of NaOH — i.e., accurately solution of NaOH — i.e., accurately determine its concentration.determine its concentration.
LAB PROBLEM #1: Standardize a LAB PROBLEM #1: Standardize a solution of NaOH — i.e., accurately solution of NaOH — i.e., accurately determine its concentration.determine its concentration.
4343
PROBLEM: You have 50.0 mL of PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M 3.0 M NaOH and you want 0.50 M NaOH. What do you do?NaOH. What do you do?
PROBLEM: You have 50.0 mL of PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M 3.0 M NaOH and you want 0.50 M NaOH. What do you do?NaOH. What do you do?
Add water to the 3.0 M solution to lower Add water to the 3.0 M solution to lower its concentration to 0.50 M its concentration to 0.50 M
Dilute the solution!Dilute the solution!
4444
PROBLEM: You have 50.0 mL of 3.0 M PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. NaOH and you want 0.50 M NaOH. What do you do?What do you do?
PROBLEM: You have 50.0 mL of 3.0 M PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. NaOH and you want 0.50 M NaOH. What do you do?What do you do?
3.0 M NaOH 0.50 M NaOH
H2O
Concentrated Dilute
But how much water But how much water do we add?do we add?
4545
PROBLEM: You have 50.0 mL of 3.0 M PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. NaOH and you want 0.50 M NaOH. What do you doWhat do you do??
PROBLEM: You have 50.0 mL of 3.0 M PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. NaOH and you want 0.50 M NaOH. What do you doWhat do you do??
How much water is added?How much water is added?
The important point is that --->The important point is that --->
moles of NaOH in ORIGINAL solution = moles of NaOH in ORIGINAL solution = moles of NaOH in FINAL solutionmoles of NaOH in FINAL solution
4646
PROBLEM: You have 50.0 mL of 3.0 M NaOH PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. What do you do?and you want 0.50 M NaOH. What do you do?PROBLEM: You have 50.0 mL of 3.0 M NaOH PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. What do you do?and you want 0.50 M NaOH. What do you do?
Amount of NaOH in original solution = Amount of NaOH in original solution =
M • VM • V = =
(3.0 mol/L)(0.050 L) = 0.5 M NaOH X V(3.0 mol/L)(0.050 L) = 0.5 M NaOH X V
Amount of NaOH in final solution must also = Amount of NaOH in final solution must also = 0.15 mol NaOH0.15 mol NaOH
Volume of final solution =Volume of final solution =
(0.15 mol NaOH) / (0.50 M) = 0.30 L(0.15 mol NaOH) / (0.50 M) = 0.30 L
or or 300 mL300 mL
4747
PROBLEM: You have 50.0 mL of 3.0 M PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. NaOH and you want 0.50 M NaOH. What do you do?What do you do?
PROBLEM: You have 50.0 mL of 3.0 M PROBLEM: You have 50.0 mL of 3.0 M NaOH and you want 0.50 M NaOH. NaOH and you want 0.50 M NaOH. What do you do?What do you do?
Conclusion:Conclusion:
add 250 mL add 250 mL of waterof water to to 50.0 mL of 50.0 mL of 3.0 M NaOH 3.0 M NaOH to make 300 to make 300 mL of 0.50 M mL of 0.50 M NaOH.NaOH.
3.0 M NaOH 0.50 M NaOH
H2O
Concentrated Dilute
4848
A shortcutA shortcut
MM11 • V • V11 = M = M22 • V • V22
Preparing Solutions Preparing Solutions by Dilutionby Dilution
Preparing Solutions Preparing Solutions by Dilutionby Dilution