FT/GN/68/01/23.01.16

SRI VENKATESWARA COLLEGE OF ENGINEERING

COURSE DELIVERY PLAN - THEORY Page 1 of 6

Department of Chemical EngineeringLP: CH 6013

Rev. No: 00

Date: 25.01.2017B.E/B.Tech/M.E/M.Tech : Chemical Engineering Regulation: 2013

PG Specialisation : Not Applicable

Sub. Code / Sub. Name : CH 6013 PETROLEUM TECHNOLOGY

Unit : I

Unit Syllabus: Refinery products – Refinery Feeds – Crude distillation – Coking and thermal process.

Objective: To give an overview about the Refining processes.

SessionNo *

Topics to be covered RefTeaching

Aids

1 Introduction – basics 1(Pg. 1 – 4) PPT

2 Introduction to Refinery principles 1(Pg. 1 – 4) PPT

3 Refinery products: Part – I 1(Pg. 5 – 20) PPT

4 Refinery products: Part – II 1(Pg. 5 – 20) PPT

5 Refinery Feeds 1(Pg. 21 – 35) PPT

6 Crude distillation 1(Pg. 37 – 58) PPT

7 Coking and thermal process: Part – I 1(Pg. 67 – 88) PPT

8 Coking and thermal process: Part – II 1(Pg. 67 – 88) PPT

9 Revision -- PPT

Content beyond syllabus covered (if any): Detailed explanation on upstream processes in crude oil refinery

* Session duration: 50 minutes

FT/GN/68/01/23.01.16

SRI VENKATESWARA COLLEGE OF ENGINEERING

COURSE DELIVERY PLAN - THEORY Page 2 of 6

Sub. Code / Sub. Name: CH 6013 PETROLEUM TECHNOLOGY

Unit : II

Unit Syllabus :

CATALYTIC CRACKINGCatalytic Cracking - Catalytical hydro cracking – Hydroprocessing and Resid processing hydro treating.

Objective: To give an introduction of cracking methods.

SessionNo *

Topics to be covered RefTeaching

Aids

10 Catalytic Cracking – Introduction 1(Pg. 93) PPT

11 Fixed bed - Catalytic Cracking 1(Pg. 94 – 124) PPT

12 Moving bed- Catalytic Cracking 1(Pg. 94 – 124)

PPT

13 FCC - Catalytic Cracking 1(Pg. 94 – 124)

PPT

14 Catalytical hydro cracking: Part – I 2(Pg. 137 – 154) PPT

15 Catalytical hydro cracking: Part – II 2(Pg. 137 – 154) PPT

16 Hydroprocessing 2(Pg. 159 – 170) PPT

17 Resid processing hydro treating. 2(Pg. 159 – 170) PPT

18 Revision -- PPT

19 CAT I

Content beyond syllabus covered (if any):

* Session duration: 50 mins

FT/GN/68/01/23.01.16

SRI VENKATESWARA COLLEGE OF ENGINEERING

COURSE DELIVERY PLAN - THEORY Page 3 of 6

Sub. Code / Sub. Name: CH 6013 PETROLEUM TECHNOLOGY

Unit : III

Unit Syllabus :

CATALYTICAL CRACKINGReforming and isomerization alkylation and polymerization – Product blending – Supporting processes.

Objective: To give the overview about various cracking processes.

SessionNo *

Topics to be covered RefTeaching

Aids

20 Catalytic Reforming – Introduction1

(Pg. 189) PPT

21 Catalytic Reforming – Various processes 1(Pg. 190 – 202)

PPT

22 Isomerization 1(Pg. 203 – 210)

PPT

23 Alkylation and polymerization – Introduction 2(Pg. 215 – 221)

PPT

24 Alkylation and polymerization - Various processes 2(Pg. 222 – 230)

PPT

25 Polymerization 2(Pg. 231 – 239)

PPT

26 Product blending 2(Pg. 243 – 256)

PPT

27 Supporting processes. 2(Pg. 261 – 281)

PPT

28 Revision -- PPT

Content beyond syllabus covered (if any):

* Session duration: 50 mins

FT/GN/68/01/23.01.16

SRI VENKATESWARA COLLEGE OF ENGINEERING

COURSE DELIVERY PLAN - THEORY Page 4 of 6

Sub. Code / Sub. Name: CH 6013 PETROLEUM TECHNOLOGY

Unit : IV

Unit Syllabus :

LUBRICATING PRODUCTS Lubricating oil blending stocks petrochemical feedstocks.

Objective: To give an overview about the lubricating products in a refinery

SessionNo *

Topics to be covered RefTeaching

Aids

29 Lubriciating oil - Introduction 2(Pg. 287) PPT

30,31 Lubriciating oil - properties 2(Pg. 288 – 289) PPT

32 Blending stocks – Introduction 2(Pg. 292 – 302) PPT

33 Blending stocks: Part – I 2(Pg. 292 – 302) PPT

34 Blending stocks: Part – II 2(Pg. 292 – 302) PPT

35 Petrochemical Feedstocks: Part – I 2(Pg. 303 – 316) PPT

36 Petrochemical Feedstocks: Part – II 2(Pg. 303 – 316) PPT

37 Petrochemical Feedstocks: Part – III 2(Pg. 303 – 316) PPT

38 Revision -- PPT

39 CAT II

Content beyond syllabus covered (if any):

* Session duration: 50 mins

FT/GN/68/01/23.01.16

SRI VENKATESWARA COLLEGE OF ENGINEERING

COURSE DELIVERY PLAN - THEORY Page 5 of 6

Sub. Code / Sub. Name: CH 6013 PETROLEUM TECHNOLOGY

Unit : V

Unit Syllabus :

COST EVALUATION – Economic evaluation of petroleum resid and refineries.

Objective: To impart knowledge about the economics of a petroleum industry.

SessionNo *

Topics to be covered RefTeaching

Aids

40 Cost Evaluation – Introduction 1(Pg. 333 – 340) PPT

41 Cost Evaluation: Part – I 1(Pg. 333 – 340) PPT

42 Cost Evaluation: Part – II 1(Pg. 333 – 340) PPT

43 Economic evaluation of petroleum: Part – I 1(Pg. 355 – 357) PPT

44 Economic evaluation of petroleum: Part – II 1(Pg. 357 – 360) PPT

45,46 Economic evaluation of petroleum resid 1(Pg. 360 – 361) PPT

47 Economic evaluation of petroleum- Refineries: Part – I 1(Pg. 362 – 364) PPT

48 Economic evaluation of petroleum- Refineries: Part – II 1(Pg. 364 – 365) PPT

49 Revision -- PPT

50 CAT III

Content beyond syllabus covered (if any):

* Session duration: 50 mins