Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Kohler (科勒)
POSITION:
HR Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Performs administrative & HR support and general administrative duties.
2. Other work as needed
REQUIREMENTS/QUALIFICATIONS:
1. Bachelor school or diploma or above on 2015 year
2. Good team work spirit
3. Being patient and careful on work WORK LOCATION:
Changzhou
Salary Budget: Negotiation
Tel:(0519) 83088850
Email:[email protected]
Send CV to: [email protected]
2. POSITION SPECIFICATION
For XJTLU Students COMPANY:
TRW Automotive (美国天合汽车)
POSITION:
Electronics Design Intern
JOB DESCRIPTION:
Principal Responsibilities
Support HW engineer to input eBOM
SCH drawing based on HW concept design from HW engineer
Follow TRW PCB process and manufacture design rule;
Support DFM review for PCBA
supprot quality department for trouble shooting
support data collecting analysis
Perform any other duties and responsibilities which may be assigned by
department manager
REQUIREMENTS/QUALIFICATIONS:
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
Email:[email protected]
Send CV to: [email protected]
3. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Shure (舒尔)
POSITION:
QA Intern
JOB DESCRIPTION:
Principal Responsibilities
1.Monitor product first pass yield, and take action to improve first pass yield if
need;
2.Support Quality engineer to handle raw material incoming, in process,
outgoing quality issues;
3.Support Quality engineer to maintain quality inspection instructions;
4.Maintain and improve ISO 9001 quality management system through internal
audits, corrective and preventive actions and continue improvements;
5.Other duties requested by quality manager and supervisor;
REQUIREMENTS/QUALIFICATIONS:
Good in English
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
Tel:
Email:[email protected]
Send CV to: [email protected]
4. POSITION SPECIFICATION
For XJTLU Students COMPANY:
TRW Automotive (美国天合汽车)
POSITION:
Mechanical Engineer Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Support ME to output of 3D data, 2D drawing, BOM, design documents, such
as DFMEA, design analysis report, etc;
2. Assist ME to support product improvement and modification, follow up ECO
process;
3. Follow TRW product development process and design guideline;
4. Support DFM review for product in development;
5. support quality department for trouble shooting;
6. Support product line for issue solving, analyse root cause, work out solution
and generate technical report;
7. Perform any other duties and responsibilities which may be assigned by
department manager
REQUIREMENTS/QUALIFICATIONS:
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
Email:[email protected]
Send CV to: [email protected]
5. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Caterpillar (卡特彼勒)
POSITION:
Technical Support Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Investigation of production improvements on motorgraders and wheel type loaders.
2. Coordination between design control, Supply Chain, Planning, and Operations to effect the solution to design related improvements.
3. Analysis of BOM and execution of engineering changes. 4. Coordination with Supply Chain and Global Purchasing in determining part
requirements
REQUIREMENTS/QUALIFICATIONS:
1. Engineering degree or equivalent through experience. 2. Good communication and analytical skills are required. 3. Ability to be actively involved in a manufacturing environment. 4. Fluent in Chinese and a working level ability in English.
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
HR/ Contactor:
Email:[email protected]
Send CV to: [email protected]
6. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Medicalsystem (麦迪斯顿)
POSITION:
IT Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Responsible for new product development and new technology, or responsible for existing product upgrade work
2. Participate in project requirements analysis, detailed design of system framework and core module
3. According to the product development and distribution of tasks, the development of the corresponding software module
4. According to the requirements to improve the quality of software 5. Complete the testing process
REQUIREMENTS/QUALIFICATIONS:
1. Bachelor of computer software development or related major 2. Have knowledge of NET and Java 3. Strong learning ability, good communication ability 4. Work earnestly, have a strong interest and passion for the software
programming technology 5. Good at teamwork and work actively
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
HR/ Contactor:
Tel:
Email:[email protected]
Send CV to: [email protected]
7. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Novo nordisk (诺和诺德制药有限公司)
POSITION:
Pharmaceutical Sales Representative Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Provide relevant product market information in time 2. Pass the examination and certification 3. Perform product promotion strategy
REQUIREMENTS/QUALIFICATIONS:
1. Have passed RDPAC examine 2. Work positively, optimistic, good at self-motivated and under pressure 3. Honesty and integrity
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
HR/ Contactor:
Tel:
Email:[email protected]
Send CV to: [email protected]
8. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Sogefi Group(CIR) (索格菲集团)
POSITION:
Production department Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Learn the basic operation, according to the production plan, work
instructions and safety regulations requirements, quality and quantity to
complete the production task
2. Learning the basic operation principle of hot bending, forging, injection
molding and paint technology
3. Study detection method
REQUIREMENTS/QUALIFICATIONS:
1. Have the strong team cooperation spirit 2. Physical health; do not have red green color blindness, anomalous
trichromatism; normal hearing 3. Male
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
HR/ Contactor:
Tel:
Email:[email protected]
Send CV to: [email protected]
9. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Websense (韦伯森斯)
POSITION:
Software Development Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Participates and helps in the design activities of software development. 2. Tests and debugs software and delivers to directing developer for system
integration and test. 3. Codes and maintains software modules of moderate to large size and
complexity working from written and oral requirements and specification. 4. Assists in the development of prototype versions of software modules and
applications. 5. Participates in design and code reviews. 6. Provides regular feedback (e.g. detailed status reports) to supervisor on
progress. 7. Developing cross platform applications that make a difference in the work
environment.
REQUIREMENTS/QUALIFICATIONS:
1. BS/MS Computer Science/Engineering in progress. 2. Programming ability in the following languages, C++, or Script Languages
( Perl, Python ) 3. Deep understanding of Perl, Python, Shell etc. Mainly for writing internal
Tools. Linux expertise is a plus. 4. Software Development experience. 5. Ability to work in a team environment and develop enterprise level
applications, under the direction of senior staff and management. 6. Excellent written and verbal communication skills. 7. Postgraduate
WORK LOCATION:
Beijing
Salary Budget: Negotiation
HR/ Contactor:
Email:[email protected]
Send CV to: [email protected]
10. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Websense (韦伯森斯)
POSITION:
QA Intern
JOB DESCRIPTION:
Principal Responsibilities
1. Develops and executes the test strategy (plans, cases, etc.) for assigned areas.
2. Logs defects into issues database and tracks them through closure. 3. Configures workstations and operating environments as needed to
complete assigned testing. 4. Reports test results for assigned features and functionality. 5. May participate in the automation of tests. 6. Assists technical services staff in the resolution of customer escalations.
REQUIREMENTS/QUALIFICATIONS:
1. Education: Formal education in computer science or equivalent experience. 2. Experience: Entry-level 3. Knowledge of Microsoft Windows products. 4. Experience with Linux and/or UNIX is a plus. 5. Experience with networking and/or communications protocols, especially
TCP/IP. 6. Experience with 1 or more programming languages.
WORK LOCATION:
Beijing
Salary Budget: Negotiation
HR/ Contactor:
Tel:
Email:[email protected]
Send CV to: [email protected]
11. POSITION SPECIFICATION
For XJTLU Students COMPANY:
AIG (美亚财产保险有限公司)
POSITION:
Filling clerk(6 months Intern)
JOB DESCRIPTION:
Principal Responsibilities
- Print/pack policy schedule, endorsement etc that is available from ECM, and help to print out document requested by producer using stamped paper.
- Scan the claim files into ECM II, and transfer to RBC/Claims. - Work as backup among within CSU team. - Deliver quotation, policy, correspondences, claims settlement documents,
etc to producer and customer for pick up. - Ensure security and safe of stamps, invoice voucher, blank stamped
Company logo paper.
REQUIREMENTS/QUALIFICATIONS:
- College graduate or above - Good interpersonal & communication skill - Customer service talented - Proficient at Office Automation WORK LOCATION:
Suzhou Salary Budget: Negotiation
Email:[email protected]
Send CV to: [email protected]
12. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Michael Page (米高蒲志国际招聘咨询公司)
POSITION:
Intern
JOB DESCRIPTION:
Principal Responsibilities Assistant
REQUIREMENTS/QUALIFICATIONS:
- University student graduate in June 2014 / June 2015 - Chinese bilingual, Fluency in written English and conversational spoken
English - Available day for at least 4 days/week and at least 3 months - IT literate and strong knowledge of the Internet - skills in MS Word, Excel,
PowerPoint are vital - Good communication and interpersonal skills - Team oriented with a passion for success - Integrity, ability to learn quickly, hard working with an appetite for fun
WORK LOCATION:
Suzhou
Salary Budget: Negotiation
Tel: 0512-6799 5300
Email:[email protected]
Send CV to: [email protected]
13. POSITION SPECIFICATION
For XJTLU Students COMPANY:
SIEMENS (西门子)
POSITION:
Research & Development trainee JOB DESCRIPTION:
Principal Responsibilities
- Finish the training planed in 18 months, and build the knowledge to be a qualified R&D engineers in OC R&D successfully, the knowledge required are related to product,R&D
- Contribute to R&D existing projects in OC. REQUIREMENTS/QUALIFICATIONS:
- Most current technical knowledge in own field - LV switchgear; master in engineering
- Manufacture engineering and quality management skill - Testing, validating, approval of documents - Project management - Coaching skills, presentation techniques - Quality management methods - PLM processes / guidelines - Related standards/Product application knowledge/Electromagnetism
design/Testing method and equipment WORK LOCATION:
Suzhou Salary Budget: N/A
HR/ Contactor: Haoliang Huang
Email:[email protected]
Send CV to: [email protected]
14. POSITION SPECIFICATION
For XJTLU Students COMPANY:
BP (拜耳)
POSITION:
Quality Intern JOB DESCRIPTION:
Principal Responsibilities
- Support BHC HR BP team in general administrative affairs, such as booking flight ticket, hotel reservation and etc.
- Arrange management meetings & other business related meetings for HR BPs
- Provide support in expense reimbursement process. - Support to maintain SAP system for organization/position changes - Provide back office support, such as data and information collection and
preparation of charts and presentations. - Support on other assigned tasks. REQUIREMENTS/QUALIFICATIONS:
- Bachelor degree & above - Can work at least 3working days, and last for at least 6 months. - Fluent of English, both in oral and written form. - Good logic & communication skill - Good level of skill in use of computer applications, especially PowerPoint,
Excel, Word - Interested in HR function - Related internship experience is plus. WORK LOCATION:
Shaghai Salary Budget: N/A
HR/ Contactor: Lily Chen
Email:[email protected]
Send CV to: [email protected]
15. POSITION SPECIFICATION
For XJTLU Students COMPANY:
CNH (凯斯纽荷兰管理有限公司)
POSITION:
HR Intern JOB DESCRIPTION:
Principal Responsibilities
Support China HR admin of daily activities, including but not limited to: - CE business HR & Admin - HR operation admin - Meet daily HR requirement as per assignment - China Training & Development(T&D) Support - Prepare training forms and materials before training session - Record and maintain training data - Other T&D admin support assigned by manager REQUIREMENTS/QUALIFICATIONS:
- Bachelor/Master degree, major in Human Resources/Business/Psychology/ Foreign Languages are preferred
- Good command of English - Good at Microsoft Office (PPT, WORD, EXCEL) - Process & detail oriented and strong analytic skills - Outstanding communication and interpersonal skills - Team player and quick learner - 3-4 days attendance per week for 6 to 12 months WORK LOCATION:
Shanghai Salary Budget: N/A
HR/ Contactor: Kylie Huang
Email:[email protected]
Send CV to: [email protected]
16. POSITION SPECIFICATION
For XJTLU Students COMPANY:
CNH (凯斯纽荷兰管理有限公司)
POSITION:
IT Intern JOB DESCRIPTION:
Principal Responsibilities
- Acting as part of the China IT PMO team to provide updates on current projects to management;
- Supporting project manager in maintaining project timelines and documents;
- Supporting in the getting up the processes for maintaining project financial information (such as budget, actual cost);
- Involving in developing the PMO process (such as project management process).
REQUIREMENTS/QUALIFICATIONS:
- Completing or finished university degree or above, major in Business/Commerce or Engineering is a plus
- Strong communication and organization skill, ability to multi-task and work in cross time zone, multicultural teams
- Good in oral and written English - Strong computational skill in MS Office (Word, Power Point and Excel) - Ability to execute tasks on time with little supervision and follow up
independently - Ability to anticipate problem and proactively solve them - Ability to present well, well organized - At least 4 days attendance per week is required. WORK LOCATION:
Shanghai Salary Budget: N/A
HR/ Contactor: Kylie Huang
Email:[email protected]
Send CV to: [email protected]
17. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Pentair (苏州滨特尔水处理有限公司)
POSITION:
Quality Intern JOB DESCRIPTION:
Principal Responsibilities
- Check the drawings, artworks and manuals to collect the trademark and product information.
- Maintain the database with standard format. - Check the validity of the collected trademarks. - Other jobs designated by direct supervisor or management. REQUIREMENTS/QUALIFICATIONS:
- Junior college degree or above - At least 3 days/week are available - Strong responsibility and sense of teamwork - Excellent PC skills(MS Office) - Written English and computer skill are required WORK LOCATION:
Suzhou Salary Budget: Negotiation
Fax: 0512-66618857
Email:[email protected]
Send CV to: [email protected]
18. POSITION SPECIFICATION
For XJTLU Students COMPANY:
TE Connectivity (泰科电子)
POSITION:
Tax Intern JOB DESCRIPTION:
Principal Responsibilities
- Invoicing and SAP operation - Preparation of documents for tax clearance of fund remittance - Other miscellaneous daily tax work REQUIREMENTS/QUALIFICATIONS:
- Have a general picture of how finance and tax team work and operate in a big MNC
- Gain experiences on the basis finance and tax work - Apply his/her financial knowledge to practical environment WORK LOCATION:
Suzhou Salary Budget: Negotiation
Email:[email protected]
Send CV to: [email protected]
19. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Roca (乐家洁具)
POSITION:
HR Intern JOB DESCRIPTION:
- Assistant to HR colleagues to deal with HR daily transactional work. - Admin work task including but not limited to Reception, Shuttle bus, Visa,
etc. - Other task assigned by HR supervisor. REQUIREMENTS/QUALIFICATIONS:
- Will graduate in 2015 with bachelor degree. - Sound in both English and Chinese, written and oral - Good communication skills, team work spirit. - Meticulous, flexible and quick-learning with high sense of responsibility - Good command of computer skills - HRM intern experience is a plus WORK LOCATION:
Suzhou Salary Budget: N/A
HR/ Contactor: Miss Bao
Tel: 0512-62953794
Email:[email protected]
Send CV to: [email protected]
20. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Orbotech (奥宝电子有限公司)
POSITION:
HR / Admin Intern JOB DESCRIPTION:
Principal Responsibilities
Administration assistant REQUIREMENTS/QUALIFICATIONS:
- University education background - Strong communication and coordination skill - Good in oral and written English WORK LOCATION:
Suzhou Salary Budget: Negotiation
Email:[email protected]
Send CV to: [email protected]
21. POSITION SPECIFICATION
For XJTLU Students COMPANY:
BOSCH (博世)
POSITION:
AE 机电技术设计员
JOB DESCRIPTION: 1. Assembly simple station and subassembly group separated 2. Know MOE workflow and use yellow folder as required in MD 3. Respect 5S rules and keep good 5s in work area. 4. Good cooperation with project team 5. Ambitioned to support on each work at the projects 6. Support colleagues with manpower and a good cooperation to increase the teams
efficiency 7. Follow the Bosch ATMO standard to do the daily work, achieved the expected quality. 8. Check the material status and fill the necessary document in work such as APS, OPL
and so on in correct way. 9. Report the problem which happened in work to leader on time and try to get solution if
possible.
REQUIREMENTS/QUALIFICATIONS:
1. Majored in Mechatronics in technical school or above 2. One year internship in MOE or at least one year work experience in related experience
or above 3. Basic assembly & installation or above 4. Basic English level
WORK LOCATION:
Suzhou Salary Budget: NA HR/ Contactor: NA Tel: NA
Email:NA
Send CV to:
22. POSITION SPECIFICATION
For XJTLU Students COMPANY:
BOSCH (博世)
POSITION:
PLC Software Development Engineer
JOB DESCRIPTION:
1. As a Sofware Engineer, you will be responsible for software development of ATMO3 special machinery application. Detailed tasks are as the following:
2. PLC programming of various PLC controller and displays, e.g. Bosch Rexroth eedded Controlers, embedded Terminal, industrial PCs, Siemens S7, Mistsubishi., OMRON
3. PLC programming of complex testing devices for e.g. leakage testing, pressure control, sensors, motors, motion systems, roboters and process control
4. Using fieldbus systems; connecting mutiple PLC controllers, via Profibus-DP, Ethernet, TCP/IP System and machinery testing and tryout
5. System calibration and ramp up at customer side
6. Close cooperation with German BOSCH leadplants
7. Customer contact for developing optimized and customized solutions
8. Support for Bosch/PA-ATMO testing and assembly stations in China
REQUIREMENTS/QUALIFICATIONS:
1. Bachelor degree in automation, electrics or electronics 2. PLC or programming experience during University, Internship Experience in
automation 3. Advanced Knowledge in programming (PLC or C++) PREFFERED
iec61131-3 4. Knowledge in PLC-ST structured text, basic understanding of special
machinery 5. Intermediate English level
WORK LOCATION:
Suzhou
Salary Budget: NA
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to:
23. POSITION SPECIFICATION
For XJTLU Students COMPANY:
BOSCH (博世)
POSITION:
IT Intern
JOB DESCRIPTION:
1. Web-based workflow application development and configuration 2. Other assigned administrative tasks (reporting, documentation)
REQUIREMENTS/QUALIFICATIONS:
1. On study bachelor or master degree, major in computer science, information systems, IT related subjects
2. Good command of English skill 3. Certain program skills (JavaScript, Java) and familiar with MS Office. 4. Duration of Internship will last at least half year 5. Able to work at least 4 days a week 6. Accuracy and reliability , self-confidence, team ability , highly motivated
WORK LOCATION:
Suzhou
Salary Budget: NA
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to: [email protected]
24. POSITION SPECIFICATION
For XJTLU Students COMPANY:
BOSCH (博世)
POSITION:
IT Department Intern
JOB DESCRIPTION:
1. Support Portal advisor with ticket delivery for AP & CN location. Support network reporting task. Supoort network alarm monitoring. Temporarily support for AP consulting topics.
2. Coordinate with Portal advisor for Portal training, coordinate with fleet management vendor.
3. Monthly report of project (CI-CAT, PMI, MPS). Monthly report of Tips & Tricks platform click rate. Monthly training report transfer to the FSMC tool.
4. Translation of Tips & Tricks documents. 5. Support SMT responsible for CI ticket monthly report & ticket reminder. 6. Permission admin for IT documentation Portal room. 7. IT department assistant related work
REQUIREMENTS/QUALIFICATIONS:
1. University student, 2. Computer, telecommunication, etc information science major 3. Fluent spoken and written English 4. Good Microsoft office using skill 5. Good team player
WORK LOCATION:
Suzhou
Salary Budget: NA
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to: [email protected]
25. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Honeywell (霍尼韦尔)
POSITION:
Supply Chain Supervisor/Specialist
JOB DESCRIPTION:
The Honeywell Aerospace Development Program offers a rotational program for positions in Supply Chain management career paths. The rotational program is designed to provide the candidate with a six-month hands-on internship at shop floor and two 12-month rotations through various functional jobs and locations to gain a broad understanding of Aerospace’s end-to-end business. These three rotations will be in Supply Chain management career paths(Quality, Operation, Engineering, Honeywell Operating System, Health Safety & Environment), and will expose the candidate to the importance of customer responsiveness, meeting program milestones, and improving product quality.
REQUIREMENTS/QUALIFICATIONS:
1. Currently pursuing a Bachelor/Master degree, from an accredited college or university, with a major in: Supply Chain Management Operations Industrial/Manufacturing/Mechanical Engineering Health, Safety & Environment
2. Must be able to participate, in an internship, prior to completing current degree program
3. Demonstrated academic excellence 4. Willingness to relocate. 5. Ability to demonstrate the Honeywell Behaviors: getting results, champion
change, foster teamwork, effective communicator and integrative thinker.
WORK LOCATION:
Suzhou
Salary Budget: Negotiable
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to:
26. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Honeywell (霍尼韦尔)
POSITION:
Environmental/Health/ Safety Engineer
JOB DESCRIPTION:
The Honeywell Aerospace Development Program offers a rotational program for positions in Supply Chain management career paths. The rotational program is designed to provide the candidate with a six-month hands-on internship at shop floor and two 12-month rotations through various functional jobs and locations to gain a broad understanding of Aerospace’s end-to-end business. These three rotations will be in Supply Chain management career paths(Quality, Operation, Engineering, Honeywell Operating System, Health Safety & Environment), and will expose the candidate to the importance of customer responsiveness, meeting program milestones, and improving product quality.
REQUIREMENTS/QUALIFICATIONS:
1. Currently pursuing a Bachelor degree, from an accredited college or university, with a major in: Supply Chain Management Operations Industrial/Manufacturing/Mechanical Engineering Health, Safety & Environment
2. Must be able to participate, in an internship, prior to completing current degree program
3. Demonstrated academic excellence 4. Willingness to relocate. 5. Ability to demonstrate the Honeywell Behaviors: getting results, champion
change, foster teamwork, effective communicator and integrative thinker。
WORK LOCATION:
Suzhou
Salary Budget: Negotiable
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to:
27. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Honeywell (霍尼韦尔)
POSITION:
Mechanical Engineer
JOB DESCRIPTION:
The Honeywell Aerospace Development Program offers a rotational program for positions in Supply Chain management career paths. The rotational program is designed to provide the candidate with a six-month hands-on internship at shop floor and two 12-month rotations through various functional jobs and locations to gain a broad understanding of Aerospace’s end-to-end business. These three rotations will be in Supply Chain management career paths(Quality, Operation, Engineering, Honeywell Operating System, Health Safety & Environment), and will expose the candidate to the importance of customer responsiveness, meeting program milestones, and improving product quality. REQUIREMENTS/QUALIFICATIONS:
1. Currently pursuing a Bachelor degree, from an accredited college or university, with a major in: Supply Chain Management Operations Industrial/Manufacturing/Mechanical Engineering Health, Safety & Environment
2. Must be able to participate, in an internship, prior to completing current degree program
3. Demonstrated academic excellence 4. Willingness to relocate. 5. Ability to demonstrate the Honeywell Behaviors: getting results, champion
change, foster teamwork, effective communicator and integrative thinker.
WORK LOCATION:
Suzhou
Salary Budget: Negotiable
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to:
28. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Abgent (百奇生物科技)
POSITION:
Programmer
JOB DESCRIPTION:
1. Collection data and images for OEM in products from original manufacture
website.
2. Clean up our current OEM in catalogs data and image in our website.
3. Prepare product data and images for online product listing website.
4. Clean up China website catalog data, images and online listing website.
5. Categorized our lead database (email lists).
REQUIREMENTS/QUALIFICATIONS:
1. Diploma above, major in computer related
2. Microsoft word and excel
3. Some English skills. (Need to be able to read manufacture product data)
4. Comfortable with transfer data from web to excel
5. Detail oriented
6. Internship at least three days a week until the end of this year
WORK LOCATION:
Suzhou Salary Budget: Negotiable
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to:
29. POSITION SPECIFICATION
For XJTLU Students COMPANY:
SNECMA (斯奈克玛航空工业)
POSITION:
Mechanical Engineer Certification Engineer/Auditor
JOB DESCRIPTION:
1. Make the planning of Audit on line for managers and quality engineers
2. Receive the Audit findings and follow up with production on corrective actions status
3. Maintain audit on line indicators data input and reporting 4. Other assignments required by Quality Manager
REQUIREMENTS/QUALIFICATIONS:
1. Grade 3 in University, bachelor degree 2. Good written and spoken communication skills both in English
and Chinese 3. Engineering or mechanical related major is preferred 4. Open mind, team-work, humility, self-motivated, proactive and
capability of working independently. 5. 3-5 days/week for internship for 1 year to next June WORK LOCATION:
Suzhou
Salary Budget: Negotiable
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to:
30. POSITION SPECIFICATION
For XJTLU Students COMPANY:
Johnson & Johnson (强生)
POSITION:
Supplier/Vendor Management
JOB DESCRIPTION:
1. To Support New integrated NC/SCAR process and hands on documents
related works:
2. Get NC related information;
3. Send NC samples to supplier if required, and follow to arrive.
4. Prepare SCAR form, and submit to supplier after get confirmation from SQE.
5. Arrange T-con for supplier, SQE, and necessary operations, record and
submit meeting minutes after get confirmation with SQE
6. Get SMC meeting related data and documents, confirm meeting attendance,
record SMC meeting minutes, and submit record after get confirmation with
SQ Manager.
7. Arrange SQ related meetings, like audit review with supplier, CAPA review
with supplier, NC review with supplier... by SQE's requirements.
8. Managing and archive documents per necessary.
9. Supplier Quality documents creation and update as well as initial
translation.
10. Route ECO for the changes required by the Supplier quality engineer.
REQUIREMENTS/QUALIFICATIONS:
1. Good command on English written and oral
2. College degree on METAL SCIENCE AND HEAT TREATMENT or PACKAGING
3. Good communication skills WORK LOCATION:
Suzhou
Salary Budget: Negotiable
HR/ Contactor: NA
Tel: NA
Email:NA
Send CV to: [email protected]