1

Panasonic KX-TDE With SIP Trunking

Specifications subject to change without notice

TDE0.0001 SIP presentation

2

Install Sip Card

Install a V-SIPGW16 Card in an available slot and take the card out of

service

Press the Activation Key

3

Activation Key

Do Not Activate this key

The Sip Trunk will use the 4-Channel IP Trunk License

4

Shelf Property-Virtual SIP Gateway

This will be the customers Static IP Address

5

Card Property- Virtual SIP Gateway

Enter the Preferred and Alternate DNS Server IP. This can be found in the CMD prompt by typing Ipconfig /all

6

Port Property- Virtual SIP Gateway

Change the first bin to Basic Channel. You may purchase up to 16 Additional Channels. The DSP16

comes with a license for 4, and the DSP comes with a license for 16. Each additional bin would be listed as

Additional Channel for CH1

7

Port Property- Virtual SIP Gateway

Enter the IP Address given to you by the provider

8

Enter the Extension Number given to you by the Provider

9

Port Property- Register

Re-enter the IP Address given to you by the Provider

10

Port Property

Select the Codec the Provider is using

11

IPCMPR Card Property

The IPCMPR Card must have the correct IP Address, Subnet Mask and Default Gateway entered

12

10.1 CO Line Settings

Place the SIP Trunks in a Trunk Group by themselves

13

10.2 CO DIL Table

Change the DID setting to DIL and assign the correct Ring Group