1 | P a g e

2 | P a g e

SR Engineering College (SREC) established in the year 2002

is sponsored by Sri Rajeshwara Educational Society which

has four decades of rich experience in the field of Education.

It is located on Warangal-Karimnagar highway at about 15

KM away from Warangal City. SR Group runs 3 Engineering Colleges, and

scores of Junior Colleges and Schools spreading over Telangana and Andhra

Pradesh.

SR Engineering College has been in the forefront imparting high quality

technical education. State of the art infrastructure in all branches of

engineering, dedicated and qualified staff, highly conducive environment for

teaching-learning process are the hallmarks of this professionally managed

institution.

The institute is an Autonomous Institution accredited by NAAC with ‘A’ Grade

and their programs are accredited by National Board of Accreditation (NBA).

The institute is affiliated to Jawaharlal Nehru Technological University,

Hyderabad (JNTUH).

It is running 5 undergraduate (B. Tech) and 5 postgraduate (M. Tech)

engineering programs besides, Master of Business Administration (MBA) and

MBA (Integrated). The staff and the students take on new and interesting

activities to acquire ability to think uniquely and independently. Our faculty,

from across India and abroad, are considered to be the best in their fields.

Prominent personalities from the industry take sessions with the students on a

regular basis to acquaint them with contemporary best practices existing in

the industry.

It adopts innovative approaches for continuous improvement by strategic

planning, benchmarking and performance monitoring. The policy is to

establish a system of quality assurance of its graduates by continuously

assessing and upgrading teaching and learning practices. The central library

and digital library provide the necessary resources and e-learning services.

SREC has taken up a very ambitious program of restructuring curriculum and

adding state of the art technology enabled infrastructure to meet the

international ABET guidelines of accreditation and thereby produce globally

employable graduates with adequately equipped entrepreneurial skills. Our

3 | P a g e

innovative curriculum equips students to interact and work with a

heterogeneous team, which is the requirement of a real world environment.

Based on the current industry demand, courses are offered as professional

electives.

Through active industry cooperation, SREC has established centers like CISCO

Networking Academy, Microsoft Innovation Centre, IBM Centre of Excellence

and NEN Centre for Entrepreneurship Development for nurturing specific skill

sets for employability. To shape and transform the graduates to meet

challenging and complex engineering tasks globally, the college has built and

fostered relationship with reputed universities like Saint Louis University and

Purdue University. To align with ABET system of outcome based curriculum,

many reforms have been implemented in the course structure with due stress

on basic sciences and humanities, interdisciplinary and core engineering

including projects and seminars.

SREC provides an environment conducive for research where faculty and

students continuously update their knowledge. Several research projects are in

progresses which are funded by DST, AICTE and UGC. A Women Technology

Park, the first of its kind in the Telangana State has been sanctioned by DST.

The Centre for Student Services and Placements (CSSP) has been consistently

improving its placement record with the students placed in various reputed

organizations. The industry-institute interactions have been instrumental in

getting MNCs to the institute and conducting campus recruitment drives. Our

Career Guidance Cell provides career counseling and plays a pivotal role in

building the career of aspiring engineers.

S R Engineering College is implementing a strategic action plan with specific

focus on:

Novel technology enabled teaching and learning techniques,

Strengthen existing PG programs through modernization of laboratories

and training of faculty and staff,

Identify and start new PG programs in current areas of research with

immediate relevance to the state and the country,

Attract funding for sponsored research from DST, MNRE, AICTE and

UGC,

4 | P a g e

Strengthen functional areas like governance and administration,

infrastructure, finance etc.

Network with industry and institutes of repute through academic

partnership for expanding avenues for internships and research.

MESSAGE FROM CHAIRMANSri A. Varada Reddy is a pioneer in providing quality

Education and his efforts have transformed the lives of

many youngsters. A man known for discipline and

vision, Sri Varada Reddy has been serving the field of

education since 1976. With his unstinted efforts SR

has become a trusted brand name. The society runs 98

educational institutions, which include schools, junior

colleges, degree colleges and professional colleges are

managed by SR group across Telangana and Andhra Pradesh states.

International standards and values are given high priority while running the

Institutions. Sri. Varada Reddy made quality consciousness coupled with

ethical practices as the DNA of SR group.

Society aspires that Educational Technology ought to concern itself with creation of

an environment-congenial to an Effective Teaching Learning Process. His goal is to

produce devoted students and inspired teachers. Education is one of the most

important means of empowering Society with the knowledge, skills and self-confidence

necessary to participate fully in the development process. This is true not only

because education is an entry point to other opportunities, but also because the

educational achievements of students can have ripple effects.

MESSAGE FROM SECRETARYMr. A. Madhukar Reddy is determined to offer

professional education with high standards to the

younger generation. He makes constant efforts to

strengthen the network of SR group with world class

technical institutions. Engineering institutions

managed by the SR group have their distinct identity

as they offer world class facilities to the aspirants. The

5 | P a g e

establishment of SR International Institute of Technology (SRIIT) is the

beginning of a new era of technical education which has collaboration with US

Universities offering excellent opportunities for education in India and abroad.

Mr. A. Madhukar Reddy renders constant efforts to benchmark the best practices to

raise the standards of Technical Education. He travels widely to the best institutions

worldwide to incorporate right practices in to the teaching system. His dedicated

efforts resulted in blending the tradition of learning with modern. Mr. A. Madhukar

Reddy techniques of teaching. The various institutions headed by him are SR

Engineering College, Sumathi Reddy Institute of Technology for Women, SR

International Institute of Technology, SR Degree & PG College and Sparkrill

International School

MESSAGE FROM PRINCIPAL

Dr. V. Mahesh was awarded PhD in the area of

Mechanical Engineering from JNT University,

Hyderabad and M. Tech course in computer integrated

manufacturing from Regional Engineering College,

presently National Institute of Technology, Warangal. He

joined as faculty of Mechanical Engineering at SR

Engineering College in the year 2006 and has been

serving the institute since then. He headed the department of Mechanical

Engineering during the period 2007 – 2012, as Dean (Research) from 2012 to

2015. In November 2015, he took over as the Principal of the college.

He has more than 20 years of teaching experience and successfully guided

many students for their UG and PG projects. One research scholar has

completed his PhD and currently he is guiding three scholars. He has two

research projects to his credit sponsored by Department of Science and

Technology (DST). He has published more than 40 papers in various national

and international journals and conferences. He is a reviewer of number of

reputed journals in the area of mechanical engineering. His areas of interest

include Cognitive Science, Computer integrated manufacturing, Supply chain

management and Metal Matrix Composites. He is a Chartered Engineer and

Member of The Institution of Engineers (INDIA). He is a life member of Indian

Society for Technical Education (ISTE) and International Association of

Engineers.

6 | P a g e

He served as the Chairman, Board of Studies for the UG and PG programmes

in Mechanical Engineering at SR Engineering College (Autonomous). He also

served as the Member, Board of Studies of Production Engineering, JNTU

Hyderabad during academic year 2011-12 & 2012-13.

MESSAGE FROM ECE HOD : Dr. J. Tarun KumarDr. J.Tarun Kumar received his Ph. D. from JNT

University, Hyderabad in 2015,. He worked as Associate

Professor and Head of the Department (ECE) at SRIT

Engineering, for 6 years. Presently he is working as Head

of the Department S R Engineering College, Warangal. He

has 18 years of teaching experience. He is a Member of

Professional Societies IEEE, LISTE, FIETE. He has around 30 research

publications in National / International journals and conferences. His

research interest includes Wireless Communication and Digital Systems.

INSTITUTION VISION AND MISSION

Vision To be among the Top 20 Private Engineering Institutes in India by

2020

Mission Design and implement curriculum that equips students with

professional and life skills Recruit, develop and retain outstanding faculty to achieve academic

excellence Promote and undertake quality research in thrust areas of science

and Technology Collaborate with industry and academia to meet the changing needs

of society Foster innovation and cultivate the spirit of entrepreneurship

among students

ELECTRONICS AND COMMUNICATION ENGINEERINGVVIISSIIOONN OOFF TTHHEE DDEEPPAARRTTMMEENNTT

To academically outstand in the field of Electronics and Communication

Engineering education

7 | P a g e

MMIISSSSIIOONN OOFF TTHHEE DDEEPPAARRTTMMEENNTT

Build Electronics and Communication Engineering knowledge in students

by implementing novel educational experiences.

Develop effective instructional infrastructural resources.

Promote interdisciplinary learning.

Develop community through service, consulting and research activities.

AABBOOUUTT DDEEPPAARRTTMMEENNTTThe Department has experienced, qualified, dedicated, and trained

faculty with deep sense of commitment towards the Students and Institution.

Most of the faculties are pursuing their higher qualifications from various

universities. The department has well equipped and state of the art

laboratories for both UG & PG programs.

The Department of Electronics and Communication Engineering was

established with the vision of developing the department as a center of excellence in R

& D, in the field of Electronics and Communication Engineering and make the

students blossom into meritorious and self-disciplined engineers by hard work.

Electronics and Communication engineering is a swiftly advancing field, with new

ideas emerging every other second. From mobile phones to fiber optics and remote

sensing, there are exciting avenues to explore and create. The ECE department at

SREC prepares students for careers in this constantly evolving discipline. Our mission

is to develop innovative and simple instructional material to drive the concepts into

the minds of students and infuse scientific temper in the student and guide them

towards research in communication engineering.

IUCEE INTERNATIONAL ENGINEERING EDUCATOR CERTIFICATEPROGRAM (IIEECP)

Indo-Universal Collaboration for Engineering Education (IUCEE)The vision of IUCEE is to improve the quality and global relevance of

Engineering Education and research in India and related benefits to

international engineering educators, with focus on faculty development,

student development, curriculum development as well as improved teaching

technologies and research.

Objectivesi. Research & Development

ii. Curriculum and Technology Enhanced Delivery

8 | P a g e

iii. Innovation and Entrepreneurship

iv. Quality and accreditation processes

v. Industry participation in Engineering Education

The following 9 students attended SCALE student Annual

Conference which was held from 05/01/2018 to 08/01/2018 in

Thaigarajar College of Engineering, Madhurai and won first prize there

1. R,. Prakash Varma, 4th year Mech2. B. Greeshma, 4th year ECE3. P. Vineeth Reddy, 4th ECE4. D. Vinay, 3rd year ECE5. K. Sricharan Reddy, 3rd year EEE6. S. Sirisha, 3rd year CSE7. K. Venkat, 4th Civil8. Mohammed Irfan, 3rd Mech9. K. Enosh, 3rd Mech

Conference Papers Presented

S.No. Name ofConference

Date ofthe Event

Name of Faculty Title of Paper

1. ICTIEE-2018 4/1/18 to6/1/18

Mrs. Madhuri,Asst. Professor,ECE

Skill Developmentin Freshman byadapting ProjectBased Learning,Introduction toEngineering Course

The leaders of SR Engineering College received “ Institutional Leadershipin Transformation in Engineering Education” award in ICTIEE 2018conference in Noida.

Mr. Irfan, Asst. Prof. in EEE department attended ICTIEE 2018 conference

in Thiagarajar College of Engineering, Madhurai and displayed posters of

‘Design Thinking Course’ at the venue.

Dr. Pankaj Kumar, Asst. Prof. in Mech department attended ICTIEE 2018

conference in Noidai and displayed posters of ‘Design Thinking Course’ at

the venue.

III phase presentations of the following faculty members were conducted in

SR Engineering College on 8/3/17 and they got IIEECP certificates.

1. Mr. M. Sampath Reddy, ECE Dept.

2. Dr. J. Tarun Kumar, ECE Dept.

3. Dr. Pritam Singh Bakariya, ECE Dept.

9 | P a g e

Several faculty members got trained rigorously in KLE Technological

University.

I. The following faculty members completed II phase of IIEECPprogram and doing III Phase of the IIEECP Program

1. Mr. K, Raj Kumar, ECE Dept.

2. Dr. J. Ravi Chander, ECE Dept.

3. Mrs. C. Sridevi, ECE Dept.

4. Ms. Saritha, ECE Dept.

PUBLICATIONS / PRESENTATIONS AT NATIONAL AND INTERNATIONALINTERNATIONAL JOURNALS

Sreedhar Kollem, Katta Ramalinga Reddy and Duggirala Srinivasa Rao,

Denoising and Segmentation of MR Images using Fourth Order Non-linear

Adaptive PDE and New Convergent Clustering in International Journal of

Imaging Systems and Technology, Volume No.29, Issue No.1, March 2018,

Humera Zainab1, P. Anuradha published a paper on “ TESTABILITY

DESIGN FOR SLEEP CONVENTION LOGIC”, in Advances in Computational

Sciences and Technology, on March 2018, Vol: 11, Page No.: 561-566.

Ch. Rajendra Prasad, Dr. Pollaiah bojja published a paper on “A REVIEW

ON BIO-INSPIRED ALGORITHMS FOR ROUTING AND LOCALIZATION OF

WIRELESS SENSOR NETWORKS”, Journal of Advanced Research in

Dynamical and Control Systems, Volume 9, Issue 18, Pages :1366-1374 -

March- 2018.

Sreedhar Kollem, Image Denoising by using Modified SGHP Algorithm in

International Journal of Electrical and Computer Engineering (IJECE), ISSN:

2088-8708, Volume No.8, Issue No.2, April 2018 (Scopus Indexed and UGC

Approved).

S. Srinivas published a paper on “CASE STUDY ON CHANNEL

ESTIMATION TECHNIQUES FOR MIMO-OFDM SYSTEMS ” in International

Journal of Creative Research Thoughts, on April 2018, Vol:.6, Issue:2, Page

No: 115-118, ISSN:2320-2882.

G.Renuka1 , V.Ushashree2 , P .Chandrasekhar Reddy published a paper

on “Functional Verification of Inter Integrated Circuit (I2C) Using Advanced

Verification Methodology”, in International Journal of Pure and Applied

10 | P a g e

Mathematics, on April 2018, Vol: 118, Issue: 24, Page No.: 1-11, ISSN: 1314-

3395.

Mohammed Yasin Ali, Syed Musthak Ahmed published a paper on “A

CROSS-LAYERED APPROACH FOR IMPROVING QUALITY OF SERVICE OF

VIDEO TRANSMISSION IN AD-HOC NETWORKS”, in Journal of Advanced

Research in Dynamical & Control Systems, on April Special Issue 2018, Vol:

10, Page No.: 1849-1854.

P. Anuradha published a paper on “ENERGY EFFICIENT SCHEDULING

ALGORITHM FOR THE MULTICORE HETEROGENEOUS EMBEDDED

ARCHITECTUREs” in Springer SCIE journal Design automation for embedded

systems Vol. No.:21 Issue No.: 4 Year/ Month of Publication: April 2018 .

DOI: 10.1007/s10617-018-9202-7.[SCIE] Mohd

Shirazuddin1, Syed Musthak Ahmed, Anupama Deshpande published a

paper on “METICULOUS STUDY ON IMPROVING UCM’S SAFETY: ANALYSING

CAUSES OF ACCIDENTS AND SUGGESTING RECOMMENDATIONS”, in

International Journal of Computer Sciences and Engineering, on June 2018,

Vol: 6, Issue: 6, Page No.: 858-862, ISSN: 2347-2693.

Mohammed Yasin Ali, Syed Musthak Ahmed published a paper on “AN

EFFICIENT DESIGN OF CROSS LAYER DESIGN FOR POWER CONTROL AND

LINK AVAILABILITY”, in International Journal of Technical Innovation in

Modern Engineering & Science (IJTIMES), on June 2018, Vol: 4, Issue: 6, Page

No.: 143-149, ISSN: 2455-2585.

P. Anuradha published a paper on “Characterization of SPEC

BENCHMARKS” in International Journal of Pure and Applied Mathematics

vol. .:118 No.24 Year/ Month of Publication: June 2018, ISSN: 1314-3395

[Scopus Indexed Journal] https://acadpubl.eu/hub/2018-118-24/2/285.pdf

L.MARIA IRUDAYA LEO JOSEPH published a paper on “CENTRAL

RETINAL VEIN OCCLUSION: AN APPROACH FOR THE DETECTION AND

EXTRACTION OF RETINAL BLOOD VESSELS”, in Journal of Pharmaceutical

Sciences and Research, on June 2018.

Sreedhar Kollem and V. Rajanesh, Compression of Embedded Image

using a Pilot and Information Water Mark Model in International Journal of

11 | P a g e

Pure and Applied Mathematics, Volume No.120, Issue No.6, July 2018 (Scopus

Indexed and UGC Approved)

Ch. Rajendra Prasad, Dr. Pollaiah Bojja published a paper on “A

SURVEY ON ROUTING PROTOCOLS IN WIRELESS BODY AREA NETWORKS

FOR MEDICAL APPLICATIONS”, Journal of Advanced Research in Dynamical

and Control Systems, Volume 10, Issue 10, Pages :92-97 - July- 2018 ISSN :

1943-023X.

G. Renuka, V. Ushashree, P .Chandrasekhar Reddy published a paper

on “DESIGN AND IMPLEMENTATION OF ARM BASED VERIFICATION

METHODOLOGY FOR LOW COMPUTATION TIME AND HIGH

PERFORMANCE”, in Jour of Adv Research in Dynamical & Control Systems,

on July 2018, Vol: 10, (Special Issue-10), Page No.: 102-111.

Jaffreen Samdani, P. Anuradha published a paper on “VLSI

ARCHITECTURE OF A HIGH SPEED POLAR CODE DECODER USING FINITE

LENGTH SCALING LDPC CODES”, in Journal of Advance Research in

Dynamical and Control Systems(JARDCS) with ISSN 1943-023X Vol. No.: 10,

Year/ Month of Publication: July 2018, Page No’s: 153-161 [Scopus IndexedJournal]

P. Anuradha, Hemalatha Rallapalli, G.Narsimha published a paper

entitled “VERSATILE INTELLIGENT ELM ALGORITHM FOR WORKLOAD

CHARACTERIZATION’’ in Journal of Advance Research in Dynamical and

Control Systems(JARDCS) with ISSN 1943-023X Vol. No.: 10, Year/ Month

of Publication: July 2018 Page No’s: 177-184 [Scopus Indexed Journal]J. Tarun Kumar, M. Sampath Reddy, P. Ramchandar Rao published a

paper on “EQUALIZER DESIGN TO COMPENSATE IMPAIRMENTS IN OFDM

SYSTEM”, in Jour of Adv Research in Dynamical & Control Systems, on July

2018, Vol: 10, (Special Issue-2), Page No.: 1819-1826.

L.MARIA IRUDAYA LEO JOSEPH published a paper on “DETECTION

AND SEGMENTATION OF RETINAL BLOOD VESSEL IN DIGITAL RGB AND

CIELUV COLOR SPACE FUNDUS IMAGES”, in Journal of Pharmaceutical

Sciences and Researc Research Journal of Pharmacy and Technology, on

August 2018.

12 | P a g e

K. Naveen, Y. Shekar published a paper on “High- Parallel Turbo

Decoder VLSI Design”, in in International journal of pure and applied

mathematics, on August 2018.

Y. Shekar, K. Naveen published a paper on “Design of VLSI Architecture

for High Efficiency Video Coding Interpolation Filter”, in in International

journal on advance Research in dynamical & control systems, on August

2018.

Soma Umamaheshwar, Tipparti Anil Kumar, and Kunupalli Srinivas

Rao, “Performance of MIMO Detection Techniques with Spatial Multiplexing ",

in International Journal of Engineering & Technology (IJET) (UAE), on August

2018, Vol. 7, Issue:33, Page No:752-754, ISSN:2227-524X.

G. Renuka published a paper on “COMPARISON OF AES AND DES

ALGORITHMS IMPLEMENTED ON VIRTEX-6 FPGA AND MICROBLAZE SOFT

CORE PROCESSOR”, in International Journal of Electrical and Computer

Engineering IJECE, on October 2018, Vol: 8, Issue:5, ISSN: 2088-8708.

J. Mounika, Dr. J.Tarun Kumar published a paper on “ANOTHER

APPROACH FOR MECHANICAL ELECTRICAL PARAMETERS CONTROLLING

AND CHECKING UTILIZING IOT INNOVATION”, in Advances in Computational

Sciences and Technology, on November 2018, Vol: 11, Page No.: 23-33.

Ch. Sridevi published a paper on “AN ENHANCED STUDY OF

COMPUTATIONAL FLUID DYNAMICS” , International Journal of Public Health

Research & Development , Vol. 9, No. 11, November-2018, pp. 706-711.

Sreedhar Kollem, Katta Rama Linga Reddy, Duggirala Srinivasa Rao

published a paper on “DENOISING AND SEGMENTATION OF MR IMAGES

USING FOURTH ORDER NON-LINEAR ADAPTIVE PDE AND NEW

CONVERGENT CLUSTERING”, in International Journal of Imaging System

Technology, RESEARCH AR T ICLE, on November 2018, Page No.: 1–15,

Nutenki Siddhartha, G .Renuka published a paper on “CODING

TECHNIQUES FOR IMPLEMENTATION OF FAULT TOLERANT PARRALLEL

FILTER USING ECCS”, in International Journal of Electronics Engineering

Research, on November 2017, Vol: 9, Issue: 10, Page No.: 1493-1500.

13 | P a g e

Sangeetha Sadul, Rajeshwar Rao Arabelli published a paper on “IOT

BASED MONITORING AND CONTROL SYSTEM FOR APPLIANCES”, in

Advances in Computational Sciences and Technology, on November 2018, Vol:

11, Page No.: 35-42.

Dr. T. Chandrabai, E. Ramesh, Gunda Mahesh Kumar published a

paper on “THE ROLE OF TECHNOLOGY MANAGEMENT ON INNOVATION

SUCCESS AND PERFORMANCE OF ORGANIZATIONEMPIRICAL STUDY”, in

International Journal of Civil Engineering and Technology (IJCIET), on

December 2018, Vol: 9, Issue: 13, Page No.: 819-826, ISSN: 0976-6308.

S. Srinivas, T. Chandraprakash, M. Shyam Sunder published a paper on

“IMPLEMENTATION OF ADAPTIVE CHANNEL ESTIMATION AND CIR

SUPPORT BASED ON PILOT ARRAGEMENT AND ADAPTIVE FILTERING IN

MIMO-OFDM SYSTEMS”, in International Journal of Engineering &

Technology, on December 2018, Page No.: 236-239.

E. Ramesh, D. Ramesh Babu, P. Ramchandar Rao published a paper on

“THE IMPACT OF PROJECT MANAGEMENT IN ACHIEVING PROJECT

SUCCESS- EMPIRICAL STUDY”, in International Journal of Mechanical

Engineering and Technology (IJMET), on December 2018, Vol: 9, Issue: 13,

Page No.: 237-247, ISSN: 0976-6340.

Ch. Rajendra Prasad published a paper on “FAULT TOLERANT

PARALLEL FILTERS BASED ON ECC CODES” in Advances in Computational

Sciences and Technology ISSN 0973-6107 Volume 11, Number 7 (2018) pp.

597-605 © Research India Publications http://www.ripublication.com

L.MARIA IRUDAYA LEO JOSEPH published a paper on “COMPARATIVE

STUDY OF SOFT COMPUTING BASED HIGH-RESOLUTION SATELLITE IMAGE

SEGMENTATION IN ADDITIVE AND USER-ORIENTED COLOR SPACE”, in

Microelectronics, Electromagnetics and Telecommunications, Lecture Notes in

Electrical Engineering, on December 2018.

Sreedhar Kollem, Katta Ramalinga Reddy and Duggirala Srinivasa Rao,

A Review of Image Denoising and Segmentation Methods based on Medical

Images submitted to Journal of Engineering and Applied Sciences (Accepted),

(Scopus indexed journal).

14 | P a g e

WORKSHOPS / FDPS/ TRAININGS ATTENDEDDr J. Ravichander attended a Faculty Development Program on “MooCs,

open education and open educational resources, organized by JNTU

Hyderabad during 5th to 7th January 2018.

Ch. Rajendra Prasad attended conference on “Signal processing and

communication engineering systems SPACES-2018” (in association with IEEE),

4th & 5th January 2018, KLEF, Andhra Pradesh.

Dr J. Ravichander attended a Faculty Development Program on

Engineering Educated Training Program organized by SR Engineering College

during 22nd February2017 to 18th January 2018.

Ch. Rajendra Prasad attended a faculty development program on

“Engineering Exploration” course from 14th to 18th May 2018 at CEER KLE

technological University, Hubballi, Karnataka.

S. Srinivas and P. Ramchandar Rao are attended in One week training

on “NI Labview Core1 and Core2 course”, organized by at Department of

Electronics & Communication Engineering, Vasavi College of Engineering,

Hyderabad, from, from 14th to 19th May, 2018.

Ch. Rajendra Prasad, Y. Shekar, Ch. Sridevi attended workshop on

“Artificial Intelligence and Deep Learning” conducted by leadindia.in, at SR

Engineering College, Warangal, form 17th -19th June 2018.

Ch. Rajendra Prasad has awarded Certificate for completion of “Image

classification with DIGITS, Object detection with DIGITS, Neural Network

Deployment with DIGITS and TensorRT” by NVIDIA Deep Learning Institute on

19th June 2018.

Ch. Sridevi has awarded Certificate for completion of “Image

classification with DIGITS, Object detection with DIGITS, Neural Network

Deployment with DIGITS and TensorRT” by NVIDIA Deep Learning Institute on

19th June 2018.

S. Srinivas participated actively in “NI Academic & Research Day” at

Hotel Trident, Chennai hosted by National Instruments on 04th December

2018.

P. Ramchandar Rao, A. Rajeshwar Rao participated in hands on

workshop on “IOT and Drones”, organized by leadingIndia.ai, a national wide

15 | P a g e

initiative by Bennett Univeristy, Greater Noida, India from 08th & 9th December

2018.

Teaching and Learning practices in the Department of ECEThe key role of a teacher is to teach the concepts,

which can be understood as meaning to facilitate

learning of some target curriculum. Teaching is

therefore intimately tied to notions of learning and

there is a sense that if students do not learn then

whatever the teacher is doing does not deserve the

label of ‘teaching’. The use of innovative methods

in educational institutions has the potential not

only to improve education, but also to empower people, strengthen governance

and galvanize the effort to achieve the human development goals for the

country.

Class Room EnvironmentCollaborative learning :

In order to optimize on their own and each

other’s learning (Johnson & Johnson, 1999).

To achieve this purpose, teachers have tried

to organize different types of collaborative

activities in their classroom teaching.CL can

promote academic and social educational

outcomes. Teachers also encounter

challenges while organizing collaborative activities, such as designing

appropriate group tasks, composing groups, managing class time and

enhancing and monitoring productive collaboration.

The key role of a teacher is to teach, which can be understood as meaning to

facilitate learning of some target curriculum.

Teaching is therefore intimately tied to notions

of learning and there is a sense that if

students do not learn then whatever the

teacher is doing does not deserve the label of

‘teaching’. The use of innovative methods in

16 | P a g e

educational institutions has the potential not only to improve education, but

also to empower people, strengthen governance and galvanize the effort to

achieve the human development goals for the country.

FACULTY ACHIEVEMENTSMr. Rajeshwar Rao received Agri Bio NESTSTART UP APPRECIATION AWARDS on

15th September 2018 From SRIX incubator

, S R Engineering College Warangal

,Telangana , India. He has presented an

innovation in the agriculture.

NI LABVIEW ACADEMY SCHOOLAs technology evolves quickly,

laboratories must be updated

periodically as well as be able to extend

the useful life of current and legacy

equipment and software. Lab VIEW

development system is spreading out in

many applicative fields: industry,

research fields, controls and monitoring designs, these circumstances create

the need to prepare many people in the

correct approach in the design,

manipulation and management of both

the simple, complex and extensive Lab

VIEW Applications and Projects. Here

the Mr. S Srinivas and Mr. P

Ramchandar Rao have undergone

training program conducted by

National Instruments.

17 | P a g e

PROGRAMS CONDUCTEDA Four Day Training Session on “EMBEDDED SYSTEMS USING MSP 430(PHASE-I)”, organized by Department of ECE, from 8th to 11th January,2018, by Mr. Gurjeet Singh, Managing Director, Gill Insturments Pvt.Ltd, Bangalore.

To help you get hold of the

Embedded Systems Technology, here the

department suggesting some of the

Embedded Systems Workshops that you

can undergo to get skilled.

Automation is a technology which is

being widely implemented to control all

the electrical appliances automatically/

remotely, saving energy and human effort.

By doing this workshop you will build a

system that connects the electrical

appliances with Bluetooth and can be

controlled via mobile App. You can also

program the 8051 microcontroller to

switch ON/ OFF the appliances

automatically based on the user needs.

It will be an ideal course if you are

pursuing 2nd or 3rd year engineering where you will begin to learn about the

microcontrollers and automation technologies. The students will work with the

following components to build the Home Automation Project, Microcontroller -

It acts as the brain of the system and controls the process Bluetooth Module -

It is used to connect the system to the mobile via an Android App, Relay

Drivers - It will be used to convert and provide the necessary voltage to operate

the electrical appliances

A five day training on “LABVIEW CERTIFICATION COURSE (CLAD) (PH-II)”,organized by Department of ECE, from 19th to 23rd February, 2018, by Mr.Balaji, LabView, Application Developer, Banglore. Training Session on“LABVIEW CERTIFICATION COURSE (CLAD)”, by Mr. Balaji, LabView,Application Developer, Banglore.

18 | P a g e

Every student admitted into B.tech program is supposed to complete at least

one certification to satisfy the academic requirements. Students can acquire

these certifications if offered in the college or from other sources.

A Four Day Training Session on “EMBEDDED SYSTEMS USING MSP 430(PHASE-II)”, organized by Department of ECE, from 22nd to 25th February,2018, by Mr. Pradhan, Embedded Systems Engineer, Gill InsturmentsPvt. Ltd, Bangalore.

Embedded Systems Workshop mainly focuses on

the students eager to learn about Advance

features of AVR Microcontroller. They will get a

chance to expand their knowledge in interfacing

external advance peripherals like Matrix Keypad,

LCD Display, Seven Segment Display and their

application in real time projects.

The duration of this workshop will be two

consecutive days with eight hours session each

day, in a total of sixteen hours properly divided

into theory and hand on practical sessions. At

the end of this workshop a competition will be

organized among the participating students

where each participating student will get

Certificate of Participation and the Winners will get Certificate of Merit.

A one week training on “"APPLICATION OF RASPBERRY PI ON IOT",organized by ECE IETE Professional Society, from 22nd to 29th February,2018, by Mr. Atif Shah, ABE semi conductor design, Chairman &Managing Director, Chennai

19 | P a g e

An eight-day workshop on “Application of

Raspberry pi in IOT” was conducted in the

Department of Electronics& Communication

Engineering, by Mr. Atif Shah, ABE semi

conductor design, On 22nd Feb 2018 to 29 Feb

2018.

The workshop was based on usage of linux

OS and Rasbian software. It started with

python basics and computing

environment, The workshop continued

with applications like home automation

using IOT. Internet of Things or IoT in

short, is the idea of making devices and

objects smarter by linking them to the internet. IoT has promising applications

for smart homes, wearable devices, smart cities, connected cars and more.

This workshop is intended to introduces the amazing world of IoT and its

fascinating applications. Using a Raspberry Pi computer and a DHT sensor,

the students will develop an electronic device that streams temperature and

humidity data over the internet. They can program the system in such a way

that say whenever the temperature exceeds a certain limit, the device will

automatically send an email notification

Apart from gaining practical skills on the Internet of Things, by doing

this project , will learn about the Raspberry Pi development platform which is

popular among people who love innovative projects. The main objective of the

workshop was to train the participants by

imparting knowledge about the subject so

that by adopting a holistic approach they

can gain enough exposure. Apart from

theory sessions, the workshop also

included Tutorial activities, Group

sessions , Quiz to make it more interactive

and interesting.

20 | P a g e

A Seminar on “Signals and Systems and Its Applications” organized bySREC IEEE Student Branch, from 21st July, 2018, by Dr. Ravikumar,Associate Professor, NIT Warangal.A One-day seminar on “ Signals & Systems and its Applications” was

conducted in the Department of Electronics& Communication Engineering, by

Dr. Ravikumar, Assoc. Prof. NITW on 21st September 2018.

The seminar was based on usage of Matlab tool. It started with Matlab basics

like Matlab Architecture and computing environment, data types, arrays,

functions, plots. We had students and staff of Electronics and communication

Engineering participating in it which took the total strength of seminar to 120.

The duration of this seminar is One days, with 7-8 hour session, morning and

afternoon session is properly divided into theory and hands on sessions.

An Industrial visit to “All India Radio, Warangal”, organized by ECE IETEProfessional Society, on 25th July, 2018.

The objective of the Industrial Visit On

25/07/2018 is to help students gain first

hand information regarding functioning of

the industry which presents the students

with opportunities to plan, organize and

engage in active learning experiences both

inside and outside the classroom. We were

fortunate to have one highly skilled

supportive and interactive officer from whom we got to know the technical

details of the entire Operation of communication system.

As Engineering students of ECE 2ND Year, need to know about practical

operation of the communication system, to keep themselves updated about

transmission and reception of signal, and challenges of the broadcast etc,

Industrial visits serve as easy means to understand all this.

SPELLING BEEZThe Department of ECE and professional

society(IETE) conducted Speeling Beez on

17th February . the coordinators Ms. Sridevi

21 | P a g e

& Ms. Saritha have conducted at different levels

Spelling bee practice gives students confidence for the big competition.

STUDENT ACHIEVEMENTS:1. B. Navya got 1st prize in “HACKATHON -2018”, organized by Sumathi

Reddy Institute of Technology for Women, on February 2018.

2. D. Kushal, S. Santh Kumar, Kishore, Kiran, Srikanth won State 1st Prize

in “ROBOCON” National Robotics Competition, organized by MIT, Pune,

from 1st to 3rd March, 2018.

3. M. Kishore, T. Kiran, M. Sandeep participated in “MAKETHON-2018”, on

14th April 2018.

4. Srikanth, T. Kiran, M. Kishore, Jwala, Anusha and Karith are attended

one week workshop at “ALL INDIA RADIO STATION, WARANGAL”, on

June 2018.

5. M. Kishore, T. Kiran and Sainath participated in “TINKER CAMP-2018”,

organized by SR Engineering College, from 24th to 28th June 2018.

6. M. Kishore, T. Kiran, Sreeja and A. Srikanth participated in “IOT

HACKATHON-2018”, organized by Anurag Group of Institutuions,

Hyderabad, on 17th & 18th August 2018. M. Sandeep participated in

“TELANGANA STARTUP YATRA”, organized by JNTU, Hyderabad and got

Best project award, on September 2018.

7. Sanath Kumar, M. Kishore, M. Sai Teja, P. Aishwarya, K. Nikitha, K.

supriya, A. Neha, R. Vineetha, T. Meghana, Rohsan, Shivani, T. Arun

Kumar are participated in Abhivyaktha, organized by Department of

ECE, SREC, Warangal and got appreciation award, on October 2018.

HONORS:Congratulations to Mr. S. Srinivas, Mr. P. Ramchandar Rao are

successfully Completed “CERTIFIED LABVIEW ASSOCIATE DEVELOPER(CLAD)” exam on 24-11-2018, conducted by National Instruments, organizedby Department of Electronics and Communication Engineering, RVR & JCEngineering College, Guntur.

22 | P a g e

GRADUATION DAY

PARENTS TEACHER MEETSREC Conducted PTM on 19th August 2018,

Venue: ECE Department seminar Hall. Parent

teacher meeting covers the distance among

three stakeholders. PTM opens a

communication channel. Everyone is highly

busy in his own task, profession and business.

Teacher teachers a big numbers of students in

different classes. Teacher is completing several tasks other than classroom

teaching for maintaining piousness of an educational

institution. Student is busy with reading, writing,

completing class work and homework. Parent is busy

with his profession for earning bread and butter for

family.

Parent is a partner. Active participation of a parent brings

massive change in kid’s academic performance. His nature of nurturing brings

natural and holistic changes in kid’s personality. It is necessary to share

responsibility and accountability with parent for the holistic development of a child.

Parent is directly responsible for student progress at home and in the school. In fact,

it is necessary to develop a strong bridge between parent and educator. Wise parents

never leave space for developing negative outcomes. Each and every moment and

movement of student determines her/his future.

Parent teacher meeting is an opportunity to exchange observation of a child with each

other. Sharing daily experience and observation provide a wider prospect for parent

and teacher to plan, prepare and execute planning for better learning outcome of a

child. We discuss and share overall personality of a child with the teacher i.e. his/her

23 | P a g e

behavior, manner, habit, attitude, learning styles, relation to self and society etc.

PTM is a junction to meet the needs of student.

Traditional DayS R Engineering College Celebrated Traditional

Day on September 5, 2018 in the college

premises with all the glitter, color and essence

which represented the Indian Culture and

Heritage. Students and Faculty were dressed up

in their best traditional attire. The whole

campus was adorned a new color and it was the

color of Tradition, Ethnicity and Diversity with

high volts of energy.

The event began with Bathukamma competition. 32 participants including boys and

girls participated in making Bathukamma palettes.

Students carried Bathukamma on their heads and as a

rally took the path with drum beats to the amphi theatre.

As a part of celebrations several traditional events like

Rangoli, Mehendi, photography, cooking,kite festival, Tug

of war, Dance, Instrumental music, informal, Mr& Miss

SREC events were organized which added color to the

Traditional Day with the amazing performance of the

students.

SREC Students were completely in their high

traditional competitive spirit and students true inner

creativity and potentialities were driven out through

these traditional competitions. prize amount

was distributed by the respective Dean and

HOD'S to the winners who won in

traditional events. The celebrations were

followed by cultural programs. Principal,

Director, Deans, HOD'S and Faculty graced

the event. The atmosphere was filled with

fun and frolic. It as a moment of great joy

and fun.

24 | P a g e

TEACHERS DAYSR Engineering College Celebrated Teacher's

day on September 5, 2018 in the college

premises. The program started at 6.00 Pm .

Faculty attended the program with their family

members .Mrs. Kafila hosted the program. The

program started with welcoming the Principal

and Director on to the dais.

Dr. Mahesh, principal SREC addressed the gathering

in which he talked about the importance of Teacher's

Day and the challenges a teacher has to face in

outcome based education system. He Congratulated

staff members who dedicated their long term service

to the college. In his speech Director Dr. Guru Rao

focused on the responsibility of a teacher towards

society as well as shaping the carrier of a student. He also said that faculty should

concentrate on research work.

Later Director and Principal felicitated teaching and non-teaching staff members for

their dedicated work towards the institution. The celebration was followed by cultural

program where faculty children had a blast showing their talents on the stage.Vote of

thanks was proposed by Mr. Shivaji.

FACULTY CONCLAVEFaculty Conclave was held in the SR Engineering College On November 2018.

Mr. Rajendra Prasad and Girirajan won the

best presentation award in conclave.

Speaking at the inaugural session, Archana

Reddy, Dean Academics said “The faculty and

researchers must incorporate new teaching

and

Learni

ng

Methodology, which is a positive

aspect of the change that has

happened in our higher education

25 | P a g e

system.

In this context, Principal said that today’s conclave becomes very important. It

can really encourage people to understand different approaches of teaching

methodologies presented by other faculty, how to improve success rate of the

students and how do we make the students actively involve in the activity. And

these are areas that our faculty members and related academic departments,

need to be trained in.”He emphasized on excellence to be achieved through

integrity and said: “Rote learning must be discouraged, students need to

become original thinkers. The conclave witnessed participation of over 32

senior faculty from different departments.

Placement Success meetCenter for Student Services and

Placements (CSSP) @ SR Engineering

College (SREC) plays a vital role in

networking graduating students with

industry. It prepares students for the

process of recruitment and

simultaneously creates awareness among

companies about the recruitment

opportunities at SREC. Potential recruiters are given structural support for

scheduling interviews, hosting seminars, group discussions and written tests.

SR Engineering College has been consistently topping in the list of campus

placement records among private institutions in Telagana. Graduates and

postgraduates of SREC are highly regarded by employers from industry.

26 | P a g e

Engineering Project in Community Services (EPICS)We are glad to share experience for

working in EPICS. This course is the

great platform for Engineering students

in order to enhance their creativity and

imagination by designing, developing

and delivering the product for selected

community. This will also helps the

students to improve their skills of interaction with different people in different

communities. EPICS course helped me to know about the problems in the

society and how we deal with the people and their problems in the society. By

undergoing few surveys and by taking the inputs from them we have developed

a product called "UREA DETECTION IN MILK" which will help us to detect the

purity of milk.

One great thing our team did was COLLABORATORY FOR SOCIAL

INNOVATION(EPICS) Course. We explored lot of things through this project by

communicating with several people in the society and knowing their problems.

As Engineering Students I wish everybody to use their technical skills for

solving problems in society with very low costs and prove that we are real

Engineers.

IDEA FESTCenter for Creative Cognition organizes

various competitions to promote innovative

and creative thinking among student

community. The center conducts following

competitions:

Idea Fest: Every semester, students identify

a local problem and submit their ideas,

through a rigorous collaborative screening process, on how best to solve that

problem. The students pitch their ideas and the best ones are rewarded and

mentored. He/She also gets an opportunity to be incubated, to achieve the

entrepreneurial potential of his/her idea.

27 | P a g e

Make 'n' MarketMake 'n' Market have been a

gateway for thousands of minds

to an entrepreneurial

experience not only for SREC

but also for the minds from the

other colleges. All the teams

participating in Make 'n' Market

are funded with seed capital.

Make 'n' Market give the

innovative students a chance to

convert their creative ideas into a reality product which is to be sold before the

day of Make 'n' Market Exhibition Day or Demo Day. Make 'n' Market intend to

encourage the students in their new creations, make them learn marketing

skills with proper time management and

resource utilization.

How many times have you had an idea,

but not a clue what to do with it? How

many of those ideas might have been the

key that the world needed? No one is

born without a dream. But everyone isn’t

fortunate enough to complete their

dreams, due to myriad reasons. Being a

part of a country with extraordinarily talented minds, it’s only of some use if

they are directed in the right path. You live in a world where opportunities are

rarely offered. “Don’t wait for an opportunity Grab it or create your own” If you

have a dream then you should do everything to carve it into reality. Make in

SREC is here with one such opportunity for all young inspiring and upcoming

minds which will be the future of the world “Make 'n' Market”.

CLUB ACTIVITIESPainting and Sketching club

The purpose of the Painting and Sketching club is

to inculcate interest and keep up the momentum

28 | P a g e

of the aesthetic minds to turn the interest into passion. This form of art basically acts

as a therapeutic treatment to each and every mind, as every mind accumulates lots of

toxins from today’s mundane world. This helps in detoxifying one’s self without any

external healing and rejuvenates the mind within. As the statement by the Great

maestro Picasso says ‘The purpose of the art is to washing the dust of our daily life off

our souls. So, join the club enjoy and the journey of the artistic life!

Sports ClubThe Club is formed, developed, governed and

administrated by the student & faculty

representatives to encourage physical activities

and sports. The aim is to bring together all the

faculty and participate in sports

Garden clubGarden club

is formed to make a good landscape in the college

premises with greenery to create beautiful

environment. Gardening club creates the art and

craft of growing plants in the lawns of campus to

create peaceful, calm and learning environment for

everyone in the campus. The plants are grown with

a aim of creating a beauty within the landscape.

Coding ClubThe purpose of the challenge is to identify people

with excellent programming skills who can

write/design/develop code with sound logic and

good programming standards. It aims to promote

and develop the programming culture by

providing courses that enhance the knowledge

and experience of programming.

Martial Arts ClubThe martial arts is not only about the

combination of kicks, punches but it the game of

mind. A martial artist is prepared to work out

with the brain as well as the body, orders the

brain to kick to punch at the proper timing

without fail in most of the cases.

29 | P a g e

Master Communicators Club

The aim of Master Communicators Club is to

encourage students to become more

employable, go-getting professionals.

Participants can fortify their own self-image

through development of their communication

and leadership competencies. Students will

also learn how to value the distinct qualities

of others.

Drama and theatre clubDrama and theatre club provides theatre training

and positive mental relationships to the students

throughout each step in their journey of life. This

club includes play acts which improves youth to

tell the stories in the way they want. It builds

leadership skills in young students in working as

a team communication, listening and responding

story building and presenting which make them

vulnerable providing an opportunity to laugh, play and cultivate life skills.

Community Service ClubThe main intention of this community service

center is to Personality Development of students

through community service. In this community

service club, students Understand the community

in which they work and themselves in relation to

their community

Dance clubDance club will developed a creative, fun and easy

way of learning how to dance. Dancing will enhance

your fun in any social setting. Whether it's a business

function, a formal or casual event, a cruise, a

wedding, or even a vacation. Let we get you dancing

today!

30 | P a g e

Yoga ClubYoga can help your brain work better and keep your mind focused. A lot depends on

the kind of poses you perform – some of them are energizing like back bends while

forward bends have a calming effect. Standing poses build stamina and balancing

poses cultivate concentration. Twists will help you detoxify the body and release

tension.

The main Motto of Yoga club is to make individuals

physically and mentally fit to take up their day to day

work with ease and confidence. In yoga, the focus is

integrated on breath while indulging in slow

movements as well as while doing complete Asana.

Yoga promotes smooth and relaxed inhalation and

exhalation during the practice.

Editorial Board:Chief Editor : Dr. J. Tarun Kumar

Staff Members : Mr. M. Sampath Reddy, Mr. P. Ramchandar Rao,

Mr. S. Sanjay Kumar

Student Members : Ms. B. Rishika, Mr. T. Pavan Kumar.

31 | P a g e