1 MSE 110W WIRELESS SAFETY EDGE. 2 WIRELESS SAFETY EDGE MSE 110W

1

MSE 110WMSE 110WWIRELESS SAFETY EDGEWIRELESS SAFETY EDGE

2WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W

3

The new wireless safety edge MSE 110W has been designed to comply every aspect, in terms of safety, of the Europeans Norms currently in charge .

Allows you to make installations in compliance with: EN 12445EN 12453

It is classified as safety device category 2 according to EN 12978

WIRELESS SAFETY EDGE WIRELESS SAFETY EDGE MSE 110WMSE 110W

4

The MSE 110 W in not only a sensing device for the leaf edge, in fact integrates also an infrared

photocell transmitter, that coupled with the receiver on the pillar, gives you an additional protection on

the gate transit area (Device C+D EN 12453)

All photocells TX or RX present inside the MSE110W are powered by batteries (lithium type AA, minimum life 2 years) The MSE110W doesn't’ require ANY

WIRING.It definitely solves all wiring problems related with

moving leaves.


5

TXTX

TXTX

TXTXRXRX

RXRXRXRX

How it worksHow it works


6

Central elementCentral element

Incorporates 2 receivers, 1

infrared transmitter and lithium batteries.

RX and TX circuitRX and TX circuit

Batteries are easy accessible removing the screws of the

cover.

CoverCover


7

Terminals Terminals elementselements

At both MSE110W terminals you find batteries powered infrared transmitters.

Per sostituire le batterie è sufficiente rimuovere il tappo, sfilare il gruppo TX e togliere il coperchio fissato con due viti

Cover and closing screws

OR Gasket

Photocell lensPhotocell lens


8

Fixed Receiver

Can be:Can be:

•Mounted on the wall/pillarMounted on the wall/pillar

•Mounted on a “Safebeam” Mounted on a “Safebeam” columncolumn

•Incorporated inside a counter-Incorporated inside a counter-rubber edge which receives the rubber edge which receives the MSE110WMSE110W

•Mounted on a wall-support which Mounted on a wall-support which permits angle adjustment. permits angle adjustment.


9

Fixed Receiver mounted on a safebeam column


10

Fixed Receiver mounted on a counter-rubber edge


11

Fixed Receiver mounted on adjustable wall support


12

A

B

C

D

Fixed receiver applications – top views

• Wall/Pillar

• Counter-rubber edge

• Safebeam column

• Wall adjustable support


13

The fixed receiver is the only element which require wiring

It has front LEDs that allow you to monitor the status of the MSE 110 W, without accessing the control board.

Battery charge is also displayed.

Fixed Receiver


14

Open-Stop-Close key Open-Stop-Close key protected industrial protected industrial push-buttonpush-button

XB300XB300

Availability: January Availability: January 20072007

15

Control board housing Control board housing with integrated key with integrated key protected Open-Stop-protected Open-Stop-Close push-button and Close push-button and main switch main switch disconnectordisconnector

XB541XB541

Availability: January Availability: January 20072007

Documents

1 MSE 110W WIRELESS SAFETY EDGE. 2 WIRELESS SAFETY EDGE MSE 110W