TI_2019

Levelling pack for tabletop units

iCombi Classic, iCombi Pro Standard 2020-10-20

1 / 1

TI_2

019_

V01_

en-G

B_V0

1

1 Levelling pack for tabletop units

Reason:Where a worktop is uneven, the iCombi cannot be levelled without an additional accessory.

Repair/modification:Function:Where a worktop is uneven, the iCombi cannot be levelled without an additional accessory. The new levelling pack consists of 4 levelling studs and 12 washers, which can be applied at any of the 6 position points on the base of iCombi cooking system. This solution gives our customers the possibility to level the cooking system by up to 3 mm. The units protective seal is then positioned back around the base of the cooking system to prevent dirt or water from reaching underneath.

Benefits:n Levelling the unit by up to 3 mmn Included in every starter kit for iCombi tabletop units - so you can use it directly and without

delay for the installationn Enables iCombi cooking systems to be levelled without purchasing additional accessories

Availability:The levelling pack will be included in the starter kit for every tabletop unit from 16/09/20.Price:The levelling kit is included for free in the starter kit for tabletop units.

Technical information