NOTICE

MARQUE: UBTECH REFERENCE: KIT JIMU EXPLORATEUR

CODIC: 4257847

iOS Devices Android Devices

Scan the QR code below to download.

The Jimu app has built-in 3D dynamic assembly drawings, which allow users to learn Jimu robot assembly.

You can also search "Jimu" to download in either the Apple store or the Google store.

Includes 3D dynamic assembly drawings

10

The Jimu app must first be downloaded and installed for assembly.

1

1.Main Control BoxThe main control box comes packaged in a small blue box.

The main control box is the Jimu robot's "brain".

The MAC address on the back of the main control box serves as

a unique pairing address with your mobile device.

Battery (assembled at factory)

Power IndicatorRed = chargingGreen = fully chargedFlashing green = operating

Charging InterfaceUsed to charge the controller

4 PIN Cable ConnectorUsed for connecting 4-pin sensors4 PIN cable port cannot be used to connect servos!

3 PIN Cable ConnectorFor connecting the 3-pin servos or sensors

Reserved Expansion Port

Power switch InterfaceUsed for connecting the power switch

11

Disassembling the battery

Installing the battery

Installation and Removal of the Battery

Pull the button

out forcefully.

Gently lift the

battery up.

Gently remove

the battery.

Slide the battery from the side into the slot on the main control box

Push the button into the hole to lock the battery

Components2

When " " is aligned with the scale,

the angle of the direction control is 0°.

360° Clockwise Rotation

360° Counter-clockwise Rotation

2. ServoThe servos come packaged in a small green box. The servos are the robot's joints and are used to perform various actions.

Servo IDEvery servo has a unique servo ID number, which is different from other servos' ID numbers.Note: When building an official model, the servo ID number must be consistent with the servo ID number on the Jimu app. Otherwise, finished models will not complete official actions.

otatable Direction ControlThe direction control of the servo can rotate, and it can also be

spliced with the slot. " " indicates different splicing

directions.

3 PIN PortUse the 3 PIN cable to connect the main control box to the servo. Energy and information can be transmitted between the main control box and the servo.

3 PIN Port

12

Direction Control

3. CONNECTORS, PARTS, FASTENERS, WIRES

13

The decoration parts come packaged in a small red box,

and they are added to the Jimu robot to give it more character.

Connectors come packaged in a small orange box. They are used

to connect the various parts that contain slots.

Fasteners come packaged in a small purple box. They look like

buttons, and are used to connect various parts that contain holes.

Wires come packaged in a small purple box and are used to connect

parts needing power, such as the power switch, main control box and

servos.

3 PIN Cable, 160mm length

3 PIN Cable, 120mm length

3 PIN Cable, 80mm length

2 PIN Cable, 160mm length, only used to connect the main control box

to the power switch box

Note: When building an official model, please use the same length and color cables as shown in the app. Otherwise, finished models may have problems!

5. Fastener Removal ToolsThe fastener removal tools come packaged in a small red box and are used to easily remove fasteners.

4.Power AdapterThe power adapter comes packaged in a small yellow box.

*Other types of power adapters can be used directly with no assembly or disassembly required.

14

Installing the power adapter

Removing the power adapter

Place the protruding part of the adapter head into the concave part of the adapter's main body.

Press the left hand against the small round button on the adapter head without releasing, and rotate the adapter head with the right hand until it is loose.

Gently pull the adapter head out.

Rotate the adapter head to the right, continuing until you hear a ‘clicking' sound.

6. Connector Installation Tips

Place the direction control properly and align the part with it.

Push the part on the right side in the direction of the arrow until you hear a ‘clicking' sound.

Adjust the other side until the sound is heard again, and the installation is complete.

Gently pry the 2 sides of the piece apart.

15

7. Connector Removal Tips

Push the connector on the side of the direction control and stop when the piece is loose.

Then gently pull the left part.

Hold the servo using your left hand as shown in the illustration

Repeat steps and until the piece is removed.

8. Servo Removal

Display/Hide model partial view

Return the model to the initial perspective

See model building progress

and the bar can be dragged

left and right

Last Step Next Step

The component being used

16

Display component list

Build Model3

4

Turn on the power switch

Turn on Bluetooth Searching and pairing

17

Motion Control4

Click the Bluetooth icon in the app:

4

88:1B:99:0A:BA:DA

JR061 021 6070092

Main Control Box

18

Click the “ ” button in the upper left corner of the app's home screen to enter the Jimu app functions interface. All information on the set up and programming operations of Jimu robots can be found in the "instruction" module of the Jimu app.More features await your discovery.

5 More features

Connection successful5 Motion control6

Official actions

Play Pause Edit

12

12 Mois Garantie Limitée12 Month Limited Warranty

Garantía Limitada de 12 Meses12 Meses de Garantia Limitada12 Mesi di Garanzia Limitata12 Monate Beschränkte Garantie

12 証

Jimu Robot & the Jimu Robot logo are trademarks or copyrights of UBTECH ROBOTICS CORP. © 2016 UBTech Robotics. All Rights Reserved. Apple, the Apple Logo, iPad, iPhone and iPod Touch are trademarks of Apple, Inc., registered in the US and other countries. App Store is a service mark of Apple, Inc.

Jimu Robot et le logo Jimu Robot sont des marques de commerce ou propriétés intellectuelles d'UBTECH ROBOTICS CORP.© 2016 UBTech Robotics. Tous droits réservés. Apple, le logo Apple, iPad, iPhone et iPod Touch sont des marques de commerce d'Apple, Inc., déposées aux États-Unis etdans d'autres pays. App Store est une marque de service d'Apple, Inc.

UBTECH ROBOTIC CORPUBTECH ROBOTIC CORP BAOAN BRANCH5F, C Building, Huilongda Industrial Park, Shilongzai, Shiyan Town, Baoan District, Shenzhen City, ChinaLearn more about the exciting innovations from UBTech Robotics at: www.ubtrobot.comPour en savoir plus sur les innovations d'UBTech Robotics:www.ubtrobot.com

For customer service email us at: jimu.service@ubtrobot.com

Pour contacter le service à la clientèle, envoyez un courriel à: jimu.service@ubtrobot.com