1

Intelligent Lighting Solutions for Professionals.

APPLICATION AREAS INCLUDES

1. Lighting control (switching; dimming; “mood lighting”)

2. Shading control (shutters; blinds)

3. Heating, ventilation, air-conditioning (individual room temperature control; control of radiators, thermal units, boilers, coolers, fans, …)

4. Access & security (presence detection; burglary and fire detection and alarm; presence simulation; panic switch)

5. Energy management (consumption metering; load shedding; …).

6. Comfort functions and intelligent control across all applications (central user control; combined scenario’s; intelligent process control; …)

7. Remote control and remote maintenance (e.g. via phone or Internet)

8. Interfacing to complementary or peripheral systems (white goods; supervision consoles; facility management; dedicated security systems; audio; multimedia; services; …)

Switching light

Switching light & HVAC (heating/ventilation/air-conditioning)

Controlling light

Modern bus systems (DALI, KNX)

Wireless system

DIM

COM2

COM1APCOM1

Suitable connection options for different situations

Occupancy & Presence Sensors For Lighting Control Professionals .

4

Extremely high-resolution sensor systems detect the slightest movements.

Presence rangeat a mounting height of

2.8 m

Steinel Presence Control PRO IR QUATTRO HD Good presence detector with 3 pyro sensors

4800 switching zones 1300 switching zones

The Control PRO System presence detectors equipped with the KNX interface are capable of performing the following functions:

• Presence detection

• Controlling lighting with brightness control

• Controlling HVA

Reach: 8 - 20 mts. adjustable in a square detection pattern to eliminate any blind or undetected areas. The fine / small motion area is 8x8 mts. (64 sq.-mts.)

The sensor has 2 channels, one for the lighting which operates in response to the ambient lux and presence of people. The second channel operates the heating, ventilation and air conditioning systems in relation to presence only.

Detection zone

Technical Highlights

7

• Zones can be clearly planned• Detection without overlapping and without gaps• Detection reliably planned for every point in the room• No detection in passageways• Presence zone is the last to be limited

Advantages of a mechanically scalable square detection zoneIdeal for Open Plan Office Areas

The world is round but rooms aren‘t

•KNX mains connection: 24V via KNX bus voltage• Settings: ETS, remote control, bus• Lighting outputs• HVAC output• Presence output• Light-level output• Scenario outputs

Salient Features

Lux setting facility Lux level with Twilight setting can be done through a hand-held remote control. There are 6 typical room situations to choose from.

Lighting Channel Output No. 1 Automatic time adjustment - The sensor analyzes the movement and automatically adjusts the time delay for the user.

HVAC Channel Output No. 2 0 sec. - 10 minutes, Automatic time adjustment - switch 'OFF' delay. The room surveillance function allows the user to set a delay time before starting the HVAC loads. This feature automatically adjusts the time for the starter based on the movement pattern

Presence output: • switch-ON delay (with min. number of movements)• send presence cyclically• switch-ON delay and stay-ON time are changeable by bus• disable and enable output by bus

Light level output: •min. light-level change• send measured level cyclically

Scenario outputs: scene control of 4 scene

ApplicationsConference rooms, Training Halls and Meeting rooms, Class Rooms, Staff Rooms, Office Cabins

11

KNX installation

12

Technical Specifications

•KNX mains connection: 24V via KNX bus voltage

• Settings: ETS, remote control, bus

• Lighting outputs

• HVAC output

• Presence output

• Light-level output

• Scenario outputs

13

Available for the following sensors:

IR Quattro HD HF 360

IR Quattro DUAL HF

• Controlling up to 4 light channels

• Switching HVAC

• Additional presence output

• Constant lighting control, basic brightness

• IQ mode, room surveillance

• Programming button

• Brightness measurement can be calibrated (via remote control)

• Scenario control (up to 4 scenarios via remote control)

• Values can be read out via the bus

14

KNX program remote control

Enable/disable remote control

Reach/ Sensitivity HF

Stay-ON time Light / IQ mode

Test mode

Calibrate, set, teach-In twilight threshold

Switch-on delay HVAC, room surveillance, stay-ON time HVAC

Stay-ON time basic brightness, twilight settingbasic brightness, Teach-In

15

RC 7 KNX User remote control

Dim light output

Light output ON/OFF (4 hours)

Save/load lighting scenario 1

Save/load lighting scenario 2

Save/load lighting scenario 3

Save/load lighting scenario 4

Reset