1

Divisione Post vendita Centro Formazione PermanenteCentro Formazione Permanente

2

CFP – ACADEMY CFP – ACADEMY PERMANTENT TRAINING CENTERPERMANTENT TRAINING CENTER

The "CFP - Academy" will operate within the competencies of the After Sales Department, crosswise for all division of CMS INDUSTRIES and with a twofold objective, increase the technical level of internal and external structures (Agents, Dealers, Technical Assistance Centers) with scheduled training courses and periodic updates about the new technical implementations, through structured periodic reports which are sent via email

3

The various types of courses will be provided in Italian and English, and they are divided into:

MANAGEMENT OF TRAINING - COURSESMANAGEMENT OF TRAINING - COURSES

4

MANAGEMENT OF TRAINING – TRANVERSAL TRAINING COURSESMANAGEMENT OF TRAINING – TRANVERSAL TRAINING COURSES

OBJECTIVES:INCREASE THE LEVEL OF TECHNICAL OPERATIONS 'AND AUTONOMY OF EXTERNAL STRUCTURES (CAT)IMPROVING THE GENERAL SKILL

5

MANAGEMENT OF TRAINING – TRANVERSAL TRAINING COURSESMANAGEMENT OF TRAINING – TRANVERSAL TRAINING COURSES

6

INSTALLATION

3 days

Safety course Overview of the regulations in force in Europe on machine tool safety and of operating procedures with CMS machinery; training on Pilz. data uploading/downloading.

Installation Safety Course Definition of operations for MEC0138 report drawing-up relating to the compliant installation of the Machining Centre by the Subcontractor.

Problem Solving Course (according to the SW availability) Information about the web-based procedure for problem generation and management.

Manual and Code Management CourseThe participant is made self-sufficient in using the documents concerning the Machining Centre, with particular stress on spare part order management.

CNC TRAINING

5 days

Wiring Diagram Reading Course The participant is made self-sufficient in reading the machining centre wiring diagram and in searching the diagram codes.

Basic course on Axis and Inverter Adjusting System Information about the structure of a feedback system and the use of related electronic components; practical training on data uploading/downloading.

Basic Course on Osai CNC Operation The participant receives the basics of Osai CNC utilization as regards the manual handling of the machining centre and the loading and execution of onboard machining programs.

Basic Course on fanuc CNC Operation The participant receives the basics of Fanuc CNC utilization as regards the manual handling of the machining centre, the loading and execution of onboard machining programs and the Teach function.

Basic Course on Siemens CNC Operation The participant receives the basics of Siemens CNC utilization as regards the manual handling of the machining centre and the loading and execution of onboard machining programs.

Basic Course on CMS Control The participant is informed about the correct operation of the SW as regards the management of tools, Tool Table and Maintenance.

ADAVANCEDOSAI

5 days

Course on PLC debug and diagnosis Allows diagnosing the PLC variables concerning axes, measurement systems, drives and alarms. Advanced Course on axis analysis, adjustment and parameterization

The participant is offered a detailed account of axis optimization: both for managing the macro-dynamics during machining and for using the SW to check the machine dynamics, in order for CMS to receive and analyze such data.

Advanced Course on Osai CNC Operation The participant achieves an in-depth understanding of Osai CNC utilization, as regards 5-axis functions (tool centre point and creation of machining planes), measuring devices (laser - TS27 - probe) and related variable management.

Advanced Course on CMS Control The participant is instructed on the operation of the SW as regards the advanced management of tools: compensation management, family management, life management, multi-profile management.

ADVANCED FANUC

5 days

Course on PLC debug and diagnosis Allows diagnosing the PLC variables concerning axes, measurement systems, drives and alarms. Advanced Course on axis analysis, adjustment and parameterization

The participant is offered a detailed account of axis optimization: both for managing the macro-dynamics during machining and for using the SW Servoguide to check the machine dynamics, in order for CMS to receive and analyze such data.

Advanced Course on Fanuc CNC Operation The participant achieves an in-depth understanding of Fanuc CNC utilization, as regards 5-axis functions (tool centre point and creation of machining planes), measuring devices (laser - TS-27 - probe) and related variable management.

Advanced Course on CMS Control The participant is instructed on the operation of the SW as regards the advanced management of tools: compensation management, family management, life management, multi-profile management.

ADVANCED SIEMENS

5 days

Corso Avanzato Utilizzo CNC Siemens Allows diagnosing the PLC variables concerning axes, measurement systems, drives and alarms. Advanced Course on axis analysis, adjustment and parameterization

The participant is offered a detailed account of axis optimization: both for managing the macro-dynamics during machining and for using the SW to check the machine dynamics, in order for CMS to receive and analyze such data.

Advanced Course on Siemens CNC Operation The participant achieves an in-depth understanding of Siemens CNC utilization, as regards 5-axis functions (tool centre point and creation of machining planes), measuring devices (laser - TS27 - probe) and related variable management.The participant is instructed on the operation of the SW as regards the advanced management of tools: compensation management, family management, life management, multi-profile management.

Advanced Course on CMS Control

MAINTENANCE Maintenance course Mechanical Maintenance CourseElectric Maintenance Course

7

MANAGEMENT OF TRAINING – TRANVERSAL TRAINING COURSESMANAGEMENT OF TRAINING – TRANVERSAL TRAINING COURSES

For each type of course will be drawn up a document in which are defined the basic information about the course:

•COURSE DETAILS•SUBJECT AND AIMS•COURSE OBJECTIVES

8

MANAGEMENT OF TRAINING – MANAGEMENT OF TRAINING – TRAINING COURSES FOR A PRODUCT LINETRAINING COURSES FOR A PRODUCT LINE

MANAGEMENT OF TRAINING – MANAGEMENT OF TRAINING – SPECIFIC TRAINING COURSES FOR SOFTWARESPECIFIC TRAINING COURSES FOR SOFTWARE

The Training for a product line product line, are defined according to the type of machinery and provide the participant a specific preparation of the Working Centre (eg Waterjet).

Training Courses for Software, are designed to provide the partecipant a well-rounded preparation, the use of machinery and the generation of employment programs through CAD / CAM software (such as Mastercam + Line Eyewear).On request there could be qualified personnel from the software provider.

9

MANAGEMENT OF TRAININGMANAGEMENT OF TRAINING

All courses will be available to the external structures at different times of the year and, depending on the option, you will be prompted to provide a course in a non-predetermined date.

Once the Technical Assistance Centers will be supported courses will receive a certificate attesting to their frequency and the subsequent authorization to operate machinery CMS (Attestati e relazioni Finali ABNEXO 2013-07)This will have an advantage from the point of view of the autonomy of the CAT, both for the quality of the information that is provided to the customer who purchases a CMS machine.

10

MANAGEMENT OF TECHNICAL NEW DEVELOPMENTSMANAGEMENT OF TECHNICAL NEW DEVELOPMENTS

The aim of the project is to systematically disseminate the information about the new implementations introduced by CMS on the various machines.The information is divided into three levels, is addressed, with different priorities in Division Heads, Area Manager, the Engineering, Training Center, Support and those responsible for Technical Assistance Centers.

11

MANAGEMENT OF TECHNICAL NEW DEVELOPMENTSMANAGEMENT OF TECHNICAL NEW DEVELOPMENTS

The Statement of Technical Detail and Technical Operations are distributed with the standard template for the CMS manuals in Italian and English. They provide detailed instructions regarding the use and technical data of the product.