Upload
blaze-warner
View
217
Download
0
Tags:
Embed Size (px)
Citation preview
1
Disassembly
1
2
Warning●Sharp objects
●Do not attempt to eat or swallow
Warning●Possible toxic chemicals
●Do not attempt to eat or swallow
Warning●Sharp objects
●Wear gloves if possible
Note●Small objects may
get lost easily
●Have a container handy
2
3
Thank you for purchasing the
Iwata 9000 Dual-Action Airbrush!
Disassembling your airbrush can be a daunting task if undertaken alone.
In this instruction manual we will detail all the steps of the I-9000’s disassembly for the purposes of cleaning and parts removal or replacement.
Please follow each step in sequence to make things easier for yourself.
3
4
Page 1- Cover Letter
Page 2- Hazards
Page 3- Introduction
Page 4- Table of Contents
Page 5- Tools/Equipment Required
Pages 6-15- Disassembly Steps
Page 16- Contact Us
5
Airbrush wrench
Small shoebox or container
Small piece of styrofoam
Your I9000
6
Disassembly StepsStep 1- Locate and hold your
airbrush.
Step 2- Pull the paint jar/reservoir from your airbrush.
6(Return to Table of Contents.)
7
Disassembly StepsStep 3- Unscrew the cap of
your paint jar. (You may use both hands if you wish.) Paint jar disassembly will be complete.
Step 4- Set the unscrewed jar aside in a safe place.
7(Return to Table of Contents.)
8
Disassembly StepsStep 5- Hold your
airbrush with one hand.
Step 6- Holding the front of the airbrush steady, untwist the back of the airbrush.
8(Return to Table of Contents.)
9
Note: After removing, the back half should look like this.
Step 7- Hold the retaining screw carefully and unscrew the needle assembly while holding it over your shoebox.
9
Disassembly Steps
(Return to Table of Contents.)
10
Step 8- Making sure the airbrush is over a container like the shoebox, remove your airbrush needle.
Note: A very small retaining spring will fall into your shoe box.
10
Disassembly Steps
(Return to Table of Contents.)
11
Note: The piece will look like this. Place it in your airbrush jar for safekeeping.
Step 9- Hold your airbrush needle.
Disassembly Steps
(Return to Table of Contents.)
12
Step 10- Unscrew the rear retaining nut. Place the assembly in shoe box.
Step 11- Remove the retaining screw by sliding it off of the back end of the needle.
Disassembly Steps
(Return to Table of Contents.)
13
Step 12- Place your needle sharp end down into the styrofoam OR in your airbrush jar sharp end up for safekeeping.
Note: Please be extremely careful when handling your airbrush needle. It is damaged VERY easily.
Disassembly Steps
(Return to Table of Contents.)
14
Step 13- Remove your main control lever by lifting it out of the assembly.
Step 14- Use your wrench to unscrew the jet nozzle counterclockwise.
Disassembly Steps
(Return to Table of Contents.)
15
Step 15- Remove the nozzle and place it in a box for safe keeping.
Congratulations! Disassembly is complete!
Disassembly Steps
(Return to Table of Contents.)
16
Contact Us:Mailing Address Iwata Airbrush Distributors 3203 Market Plaza Suite #23 Balevore, Massachusetts 91311-1234Email [email protected] 1-888-802-1234 ext. 3045
(Return to Table of Contents.)