1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

Embed Size (px)

Citation preview

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    1/11

    CISCO 640-863

    Designing for Cisco Internetwork Solutions

    90 Q&A

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    2/11

    Looking for Real Exam Questions for IT Certification Exams!

    We guarantee you can pass any IT certification exam at your first attempt with just 10-12

    hours study of our guides.

    Our study guides contain actual exam questions, you will get word to word same on youractual test; accurate answers with detailed explanation verified by experts and all graphics

    and drag-n-drop exhibits shown just as on the real test.

    To test the quality of our guides, you can download the one-fourth portion of any guide from

    http://www.certificationking.com absolutely free.

    Besides, we also offer complete version of following exams absolutely free. You can start

    your certification from these free guides and if you are satisfied you can buy the rest

    Microsoft: 70-270, 70-305, 70-526, MB2-421

    Cisco 642-901, 642-502, 642-425

    Oracle: 1Z0-001, 1Z0-007, 1Z0-040, 1Z0-200 Novell: 50-676, 50-565

    Adobe: 9A0-019 Apple: 9L0-004, 9L0-505, 9L0-606 3COM: 3M0-211

    Citrix: 1Y0-223, 1Y0-256 CIW: 1D0-420 EMC: E20-001 Enterasys: 2B0-011

    Exam Express: EE0-011 Foundry: FN0-100 Hyperion: 4H0-002

    HP: HP0-045, HP0-052, HP0-055, HP0-090, HP0-216, HP0-417Juniper: JN0-120, JN0-330 Lotus: 190-510 Network Appliances: NS0-121

    Network General: 1T6-520 Nortel: 920-430, 920-803 OMG: UM0-100

    Sybase: 510-015 SAIR: 3X0-101, 201 SAS: A00-201 Tibco: TB0-103 ..

    For pricing and placing order, please visit http://certificationking.com/order.html

    We accept all major credit cards through www.paypal.com

    For other payment options and any further query, feel free to mail us at

    [email protected]

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    3/11

    Q: 1 Refer to the exhibit. Which statement accurately represents the

    characteristics of the core layer in this design?

    A. QoS should be performed only in the core.B. Load balancing should never be implemented or used in the core.

    C. Access lists should be used in the core to perform packet manipulation.D. It is acceptable to use a partial mesh in the core if it is connected to each device by multiple paths.E. Policy-based traffic control is implemented in the core to enable prioritization, ensuring the best

    performance for all time-critical applications.

    Answer: D

    www.CertificationKing.com- 3 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    4/11

    Q: 2 Which statement accurately describes one difference between a small office

    and medium office topology?

    A. Small offices commonly use Rapid PVST+ for Layer 3 deployments.

    B. Medium offices commonly use integrated route and switching platforms.C. Medium offices use integrated 10/100/1000 interfaces as Layer 2 trunks.D. Medium offices use external access switches to support LAN connectivity.

    Answer: D

    Q: 3 Which three factors best justify WAN link redundancy between

    geographically dispersed sites? (Choose three.)

    A. important traffic flows

    B. lack of speed

    C. high link utilization

    D. uncertain reliabilityE. excessive packet transmission rate

    F. high expense of transmitting data

    Answer: A, B, D

    Q: 4 Refer to the exhibit. Which two statements describe why Model A is the

    recommended design for routing between Building Distribution switches and Campus Core switches?

    (Choose two.)

    www.CertificationKing.com

    - 4 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    5/11

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    6/11

    E. analog modem

    Answer: A

    Q: 6 Which two of these represent a best practice implementation of a Split MACLWAPP deployment in a Cisco Unified Wireless Network? (Choose two.)

    A. Each wireless client authentication type maps to a shared SSID which in turn maps to a common shared

    VLAN.

    B. Each wireless client authentication type maps to a unique SSID which in turn maps to a unique VLAN.

    C. Each wireless client authentication type maps to a unique SSID which in turn maps to a common sharedVLAN.

    D. 802.1Q trunking extends from the wired infrastructure to the access point for translation into SSID(s).

    E. 802.1Q trunking extends from the wired infrastructure to a wireless LAN controller for translation into

    SSID(s).F. 802.1Q trunking extends from the wired infrastructure to a wireless LAN controller. Then the 802.1Q

    packet is encapsulated in LWAPP and sent to the access point for transmission over the SSID(s).

    Answer: B, E

    Q: 7 Which two statements represent advantages that the top-down network

    design process has over the bottom-up network design process? (Choose two.)

    A. is able to provide the big picture

    B. utilizes previous experience

    C. takes less time to design a networkD. identifies appropriate technologies first

    E. provides a design for current and future development

    Answer: A, E

    Q: 8 Which two of these are required for wireless client mobility deployment

    when using a Cisco Unified Wireless Network? (Choose two.)

    A. assigned master controller

    B. matching mobility group name

    C. matching RF group nameD. matching RF power

    E. matching security

    F. matching RF channel

    www.CertificationKing.com

    - 6 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    7/11

    Answer: B, E

    Q: 9 Which two VoIP characteristics are affected most by codec choice? (Choose

    two.)

    A. voice quality

    B. silent packet handlingC. voice packet header size

    D. bandwidth required for voice calls

    Answer: A, D

    Q: 10 Which H.323 protocol controls call setup between endpoints?

    A. H.225

    B. H.245

    C. RAS

    D. RTCP

    Answer: B

    Q: 11 A company is designing a worldwide IPv6 network with duplicated file

    servers at multiple locations. Each file server contains identical reference information. Which IPv6

    address type would be used to allow each end station to send a request to the nearest file server using thesame destination address, regardless of the location of that end station?

    A. unicast

    B. anycast

    C. multicast

    D. broadcast

    Answer: B

    Q: 12 Given a VoIP network with these attributes:

    Codec: G.728

    Bit rate: 16 Kbps

    WAN Bandwidth: 256 Kbps

    www.CertificationKing.com

    - 7 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    8/11

    Packet Header: 6 bytes

    Payload: 40 bytes

    CRTP: Yes

    How many calls can be made?

    A. 7 calls

    B. 8 calls

    C. 13 callsD. 14 calls

    Answer: C

    Q: 13 The topology map in the draft design document should cover which two

    layers of the OSI model? (Choose two.)

    A. physical

    B. data link

    C. network

    D. transportE. session

    F. application

    Answer: A, C

    Q: 14 Which two techniques can reduce voice packet transfer delay across a link

    of less than 512 kbps? (Choose two.)

    A. deploy LFI

    B. increase queue depth

    C. increase link bandwidth

    D. extend the trust boundaryE. deploy software compression

    Answer: A, C

    Q: 15 Your company's Cisco routers are operating with EIGRP. You need to join

    networks with an acquisition's heterogeneous routers at 3 sites, operating with EIGRP and OSPF. Which

    describes the best practice for routing protocol deployment?

    www.CertificationKing.com

    - 8 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    9/11

    A. apply OSPF throughout both networks

    B. apply one-way redistribution exclusively at each locationC. apply two-way redistribution exclusively at each location

    D. apply two-way redistribution at each location with a route filter at only one location

    E. apply two-way redistribution at each location with a route filter at each locationF. apply EIGRP with the same autonomous system throughout both networks

    Answer: E

    Q: 16 A Cisco security mechanism has the following attributes:

    it is a sensor appliance

    it searches for potential attacks by capturing and analyzing traffic

    it is a "purpose-built device"

    it is installed passivelyit introduces no delay or overhead

    Which Cisco security mechanism is this?

    A. IKE

    B. PIX

    C. HIPS

    D. NIDS

    E. HMAC

    Answer: D

    Q: 17 You are designing a small branch office that requires these attributes:

    support for 60 users

    the growth capacity to add another 15 users soon

    redundant access

    higher bandwidth between the Layer 2 switch and routing to the WAN

    Which branch office topology or technology must be used?

    A. two-tier

    B. loop-freeC. three-tier

    D. EtherChannel

    E. integrated routing and switching

    www.CertificationKing.com- 9 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    10/11

    Answer: D

    Q: 18 Which two of these best describe the implementation of a WAN Backup

    design over the Internet? (Choose two.)

    A. a best-effort method

    B. requires no ISP coordination or involvementC. bandwidth guaranteed based on interface configuration

    D. designed as an alternative to a failed WAN connection

    E. implemented with a point-to-point logical link using a Layer 2 tunnel

    Answer: A, D

    Q: 19 Given a VoIP network with these attributes:

    Codec: G.711

    WAN bandwidth: 768Kbps

    Packet Header: 6 bytes

    Payload: 160 bytesCRTP: No

    How many calls can be made?

    A. 7 calls

    B. 8 callsC. 9 calls

    D. 11 calls

    E. 13 calls

    Answer: C

    Q: 20 RST Corporation is planning to upgrade its current network. The chief

    technology officer has supplied a topology diagram and an IP addressing scheme of the current network

    during an interview.

    RST has been growing at about twenty percent per year. It has been difficult to maintain customer

    support at a satisfactory level. Therefore, the RST board has met with and directed the chief technologyofficer to look into network improvements.

    Which two items are most relevant in documenting RST's business requirements? (Choose two.)

    www.CertificationKing.com

    - 10 -

  • 7/21/2019 1. Designing for Cisco Internetwork Solutions (DESGN) - Retired - 640-863-s

    11/11

    A. projected growth estimates

    B. network performance requirements

    C. existing network topologies

    D. improved customer support requirementsE. the IP addresses assigned by the ISP

    Answer: A, D

    Q: 21 The Cisco Data Center Network Architecture comprises which two Cisco

    SONA layers? (Choose two.)

    A. Interactive Services

    B. Business ApplicationsC. Network Infrastructure

    D. Collaboration Applications

    E. WAN/Internet

    Answer: A, C

    Q: 22 Drop

    www.CertificationKing.com

    - 11 -