Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1- الدهانات الإن�سائية
Water Base
1- Construction paintsالأ�سا�س الـمـائي
Sealer�سـيـلـر
�سيلر جولدن
:
:
:
:
:
:
:
:
:
:
:
:
:
Golden Sealer
Golden Sealer
�سيلر كلا�سيك
:
:
: :
:
: :
:– : – :
:
:
:
Classic Sealer6433 Primer Sealer White
Premium quality pigmented primer sealer based on acrylic emulsion with good sealing and bindingproperties.
PRODUCT DESCRIPTION
For interior and exterior use.Excellent foundation coat for various emulsion and texture finishes.Very good sealing and adhesion properties on porous substrates.Water vapour permeable .Unsaponifiable and alkali resistant.Quick drying and almost odourless.Easy to apply.
PRODUCT USE
White or any requested color.FlatMatt1.58 +/- 0.0245-46%14-15 sq. mt. / lt at 30 micron DFT(depends upon the substrate conditionand method of application).N/A1 hour2-3 hours200-300 cyclesSatisfactoryN/AN/AN/A3 hours.
Concrete, masonry, cement rendering , plaster etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brickwork, concrete, rendered surfaces and majority of the cement type building surfaces.Used as primer coat in texture and emulsion systems.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Classic Sealer6433 Primer Sealer White
Primer should be mixed thoroughly before the application.Ensure proper ventillation during application and dryingDilute the primer as per recommended thinner.A long haired brush is recommended untill the surface is saturated.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
New concrete must be dry by keeping 3 to 5 weeks on an open atmosphere.All dirts , powders and other contaminations must be removed properly.Ensure cement based and plastered surfaces are sufficiently dry and cleaned properly .
Normally not applicable to the old surfaces.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
NANA
NANA
Approx 5-10%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�سيلر �إقت�سادي
4646رقم الكود :
دهان أساس مائي مؤسس على مستحلب الأكريليك كوبوليمر : الوصف
الخووووووووووووووووووووووووووا والاستعمال
سوفف والأسو يستخدم في الداخل والخارج علوى الدودران و الأ :
.الاسمنتيه والخشبية
المواصفات الفنية
تفريبا . 1.05 : الكثافة
.لم لوبحسب اللون ا : اللون
من الحدم . % 0..5 : المواد الصلبة
ميكورون يعتمود علوى نوو 55متر مربع / لتر عند سوماكة 11 : معدل الانتشار الس و طريفة التنفيذ (
يعتمد ذلك على سماكة الدهان و درجة الحرارة . ساعة ، 6- . : زمن الدفاف
. م في : المظهر
غير قابل للاشتعال . : درجة الاشتعال
شهر من تاريخ الإنتاج . .1 : مدة التخزين
. الأمشاطالفرشاة /الرولة / : طريفة ال لاء
الماء النفي . : المخفف
بدون تخفيف : نسبة التخفيف
يدب أن يكون الس نظيفا ، جافا خاليا من أي شوائب أو أغبرة : إعداد الس أو زيوت .
سيلر داخلي
6494 Int. Primer Sealer
An economical internal plastic emulsion paint based on acrylic copolymer and some inertpigments.
PRODUCT DESCRIPTION
For interior use only.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying properties.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.50 +/- 0.0232.5 %11 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour2 hours.( max)Less than 100 cyclesSatisfactoryNANANAApprox. 2-3 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Economy Sealer
6494 Int. Primer Sealer
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat ofPliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Economy Sealer
Puttyمـعـجـون
معجون جاهز جولدن
A premium quality linseed filler based on an alkali resistant terpolymer acrylic binder. It is unique to all internal and external plaster surfaces, concrete precast, drylining and cinderblock.
PRODUCT DESCRIPTION
For interior use.Developed for making smooth surface of cement based building materials.Good sanding properties.Can provide excellent smooth surfaces.Very good adhesion properties.Almost odourless.Unsaponifiable and alkali resistant.Easy to apply.
PRODUCT USE
Off white or any requested colorSmooth/ FlatMatt1.68 +/- 0.0253 %1-2 kg/ sq. mt. at 200 micron DFT(depends upon the substrate condition& method of application)NAApprox 1 hour.3-4 hours.100- 200 cyclesSatisfactoryNANANA4-6 hours.
New and old walls
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Linseed Filler 6308Golden Putty
Putty should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.Stainless steel filling knife trowel or American knife can be used for application.
Pure Waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are enough and cleaned properly.All dirts, powders,laitance and other contaminations must be removed .Prime one coat of Masonry Primer or Acrylic Sealer if the porosity of thesubstrate is high.Pliolite Sealer can be applied on the top of the gypsum or any powdery surfaces. If the surface is alkaline , clean the surface with pure water untill it is neutral.
Old paint must be removed by physical methods. After removal of old paint , the surface should be cleaned thoroughly.Make the surface dry before the application of putty.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
NANA
NANA
Ready for use
Not recommended.
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Linseed Filler 6308Golden Putty
3650رقم الكود :
معجوووج هووللج لاجوواراج لوولل الجووود متحوو لاوو م وو ا : الوصفال يربووولي ر ال وووللق لاواوبوولا بلإلوولجو لوو لهووود بوو الي وو ا
ألبل الذي بجعاه أكثر حهولو ج الاح خااق .
الخووووووووووووووووووووووووووا والاستعمال
صوووو م لمحوووو ع لي ل ووووا ه يووووي الاجووووواا الاا ايووووو لالخلرهيووووو :و لوو لءوولا هوواار أماوو لعلووا ل توولعه بللجبوو الووذي بلإلوولج
بجعاه أكثر حهولو ج الاح خااق لالارد .
المواصفات الفنية
توربلل . 1.47 : الكثافة
من ال جم . % 05 : المواد الصلبة
بع ا علا لاو حو لكو ال عجووج لال وءم ال وراد 2كياو/ ق 2-1 : معدل الانتشار طمئه .
حللو بع ا علا لا درهو ال رار . 1 : زمن الجفاف
حلللا . 7-6 : زمن إعادة الطلاء
نللم . -مءا : المظهر
غير قلبل لمش علي . : درجة الاشتعال
حكي و ال عجوج . : طريقة الطلاء
ال لا ال و . : المخفف
لا ب صم ب خاياه . : نسبة التخفيفوج ال ءم نظيال ، هلجل لليل من أي شوائ أل أغلر بج أج بك : إعداد السطح
أل بوا .
معجون جاهز كلا�سيك زـاهـون جـجـمع
A premium quality oil based on an alkali resistant terpolymer acrylic binder. It is unique to all internal and external plaster surfaces, concrete precast, drylining and cinderblock.
PRODUCT DESCRIPTION
For interior use.Developed for making smooth surface of cement based building materials.Good sanding properties.Can provide excellent smooth surfaces.Very good adhesion properties.Almost odourless.Unsaponifiable and alkali resistant.Easy to apply.
PRODUCT USE
Off white or any requested colorSmooth/ FlatMatt1.74 +/- 0.0250 %1-2 kg/ sq. mt. at 200 micron DFT(depends upon the substrate condition& method of application)NAApprox 1 hour.3-4 hours.100- 200 cyclesSatisfactoryNANANA4-6 hours.
New and old walls
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Putty White 6305Classic Putty
Putty should be mixed thoroughly before the application.Ensure proper ventillation during application and on drying.Close the drum properly and clean the equipments once the application is over.Stainless steel filling knife trowel or American knife can be used for application.
Pure Waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are enough and cleaned properly.All dirts, powders,laitance and other contaminations must be removed .Prime one coat of Masonry Primer or Acrylic Sealer if the porosity of thesubstrate is high.Pliolite Sealer can be applied on the top of the gypsum or any powdery surfaces. If the surface is alkaline , clean the surface with pure water untill it is neutral.
Old paint must be removed by physical methods. After removal of old paint , the surface should be cleaned thoroughly.Make the surface dry before the application of putty.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
NANA
NANA
Ready for use
Not recommended.
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Putty White 6305Classic Putty
Emulsion�أمـلـ�ســن
1616رقم الكود :
دهاا ب ستيااامل ا خاااي ماا رعل مياال خااي ااا خ ا خاال : الوصف وسولمم الم ئل .
الخاااااااااااااااااااااااااوا والاياعم ل
تاطم م رعل للأيقف والواعه ت الخ رعمة اممز سقدرة لمة :فاال الافاظاا ل ساا لخوب و ق و ااة الل اامم و االلل اممااز س ل ماا
الن صع ونعو ة المخمل . اصظ ت الظنمةالمو
تق . 6.1 : الكث فة
ي ال جم . % 68 : المواد الصخ ة
مكاا وب عامااد علاال خااي قااة 63/ لااا نااد ياام ة 1م 61 : عدل الاناا ر الطتء وال طح الم اد تئه .
دقمقة عامد علل خي درعة ال ارة ويم ة الده ب . 13-63 : ز ي الجظ ف
ي ة . 1-6 : ز ي إ دة الطتء
طظل . : المظه
غم ق سم لتشاع ل . : درعة الاشاع ل
الظ ش ة/ ال ولة/ دس ال ش . : قة الطتء
الم ء النقل . : المخظف
عامد علل خاي قاة الا ش واةداة %13 مكي الاخظمف فاي : ن ة الاخظمف الم اخد ة فل ال ش .
ج أب كوب ال طح نظمظ ، ع ف م لم ي أي شوائ أو أغ ة : إ داد ال طح أو ز وت .
بلاستيك إملشن خارجي
�أمل�سن خارجي جولدن
Golden Ext. Emulsion
A superior quality internal / external plastic emulsion paint based on acrylic emulsion and some inertpigments. It is designed for very good scrab resistance as approved by SASO.
PRODUCT DESCRIPTION
For interior and exterior use.Good color retention properties.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying properties.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.50 +/- 0.0238 %12 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour2 hours.( max)1000-1100 cyclesSatisfactoryNANANAApprox. 2-3 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Acrylic Exterior Emulsion White 6163
Golden Ext. Emulsion6163Acrylic Exterior Emulsion White
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Prime, Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20%Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�أمل�سن خارجي كلا�سيك
8866رقم الكود :
دهان بلاستيك املشن خارجي مؤسس على مستحلب اكريلك كوبووليرر : الوصف الرائي .
الخووووووووووووووووووووووووووووووا والاستعرال
تشطيب خارجي للأسقف والواجهات الخارجية يتريو بقوةرع عاليوة وي :الاحتفووواا بووواللون ومقاوموووة الكسووويز وكوووالك يتريووو بال يوووا ال اصووو
ونعومة الرلرس . اصفات الف يةالرو
تقري ا . 8.1 : الكثا ة
من الحجم . %36 : الرواد الصل ة
ميكورون يعتروة كلوك علوى ةريقوة الطولا 33/ لتر ع ة سوراكة 1م81 : معةل الانتشار والسطح الرراد ةلائه .
.على درجة الحرارع وسراكة الةهاندقيقة يعترة كلك ساعة 1-8 : زمن الجفاف
ساعة . 3-1 : زمن إعادع الطلا
مطفي . : الرظهر
غير قابز للاشتعال . : درجة الاشتعال
الفرشاع/ الرولة/ مسةس الرش . : ةريقة الطلا
الرا ال قي . : الرخفف
يعتروووة كلوووك علوووى ةريقوووة الووورش وا داع %13يركووون التخفيوووف حتوووى : نس ة التخفيف الرستخةمة ي الرش .
يجب أن يكون السطح نظيفوا جا وا خاليوا مون أا شووائب أو أغ ورع أو : إعةاد السطح زيوت .
أملشن خارجي كلاسيك
Classic Ext. Emulsion
Classic Ext. Emulsion
:
:
:
:
:
:
:
:
:
:
:
:
:
-
�أمل�سن خارجي �إقت�سادي
Economy Ext. Emulsion6165Ext-Int. Acrylic Emulsion
A good quality internal / external plastic emulsion paint based on acrylic emulsion and some inertpigments. It is designed for good hiding and washability.
PRODUCT DESCRIPTION
For interior and exterior use.Good color retention properties.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying properties.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.56 +/- 0.0240 %12-13 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition& method of application)NAApprox 1 hour2 hours.( max)200-300 cyclesSatisfactoryNANANAApprox. 2-3 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Economy Ext. Emulsion6165Ext-Int. Acrylic Emulsion
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�أمل�سن د�خلي جولدن
1678رقم الكود :
دهان بلاستيكي مؤسس على مستحلب الكوبوليمر المائي . : الوصف
الخووووووووووووووووووووووووووا
والاستعمال
تشووو يب بلاسوووتيي داجلوووي للسووووران والاسووو ف و ووو ووولا :
ب تــين منه .
المواص ات ال نية
ت ر با . 65.1 : الكثافة
من الحسم . % 78 : المواد الصلبة
ميكوورون عتمووو علووي علووى ر ووة 71/ لتوور عنووو سووما ة 1م 61 : تشارمعول الان
ال لا والس ح المراد لائه .
دقي ة عتمو علي على درجة الحرارة وسما ة الوهان . 11-71 : زمن الس اف
ساعات . 4 : زمن إعادة ال لا
ناعم الملمس . -م ي : المظهر
غير قاب للاشتعال . : درجة الاشتعال
ال رشاة/ الرولة/ مسوس الرش . : ر ة ال لا
ما ن ي . : المخ ف
عتمو علي علوى ر وة الورش والاداة %11 مكن التخ يف حتى : نسبة التخ يف
المستخومة في الرش .
سب أن كون الس ح نظي ا ، جافا جاليا من أي شوائب أو أغبرة : إعواد الس ح
وت .أو ز
جولون إملشن داجلي
Golden Int. Emulsion6187Plastic Paint
An economical internal plastic emulsion paint based on acrylic copolymer and some inertpigments.
PRODUCT DESCRIPTION
For interior use only.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying properties.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.50 +/- 0.0237 %12 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour2 hours.( max)100-200 cyclesSatisfactoryNANANAApprox. 2-3 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Golden Int. Emulsion6187Plastic Paint
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat ofPliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�أمل�سن د�خلي كلا�سيك
Classic Int. Emulsion6190 Int. Plastic Emulsion
An economical internal plastic emulsion paint based on acrylic copolymer and some inertpigments.
PRODUCT DESCRIPTION
For interior use only.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying properties.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.50 +/- 0.0232.5 %11 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour2 hours.( max)Less than 100 cyclesSatisfactoryNANANAApprox. 2-3 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Classic Int. Emulsion6190 Int. Plastic Emulsion
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat ofPliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�أمل�سن د�خلي �إقت�سادي
1616رقم الكود :
دهان بلاستيكي مؤسس على مستحلب الكوبوليمر المائي . : الوصف
الخووووووووووووووووووووووووووا والاستعمال
تشطيب بلاستيك داخلي للجدران والأسقف ويفضل طلاء طبقتين : منه .
المواصفات الفنية
تقريبا . 6.05 : الكثافة
من الحجم . %35.0 : المواد الصلبة
ميكوورون يعتموود علووك علووى طريقووة 35/ لتوور عنوود سووما ة 5م 66 : معدل الانتشار الطلاء والسطح المراد طلائه .
يعتمد علك على درجة الحرارة وسما ة الدهان . ساعة 5 -6 : زمن الجفاف
ساعات . 3-5 : زمن إعادة الطلاء
ناعم الملمس . -مطفي : المظهر
غير قابل للاشتعال . : درجة الاشتعال
الفرشاة/ الرولة/ مسدس الرش . : طريقة الطلاء
الماء النظيف . : المخفف
يعتمد علك علوى طريقوة الورش والأداة %55يمكن التخفيف حتى : نسبة التخفيف المستخدمة في الرش .
يجب أن يكون السطح نظيفا ، جافا خاليا من أي شوائب أو أغبرة : إعداد السطح أو زيوت .
أملشن داخلي إقتصادي
Economy Int. Emulsion6161 Int. Plastic Emulsion
An economical internal plastic emulsion paint based on acrylic copolymer and some inertpigments.
PRODUCT DESCRIPTION
For interior use only.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying properties.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.50 +/- 0.0232.5 %11 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour2 hours.( max)Less than 100 cyclesSatisfactoryNANANAApprox. 2-3 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Economy Int. Emulsion6161 Int. Plastic Emulsion
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat ofPliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�أمل�سن لـمـاع جولدن
2161رقم الكود :
دهان املشن لماع مؤسس على مستحلب ستيرين اكريلك . : الوصف
الخووووووووووووووووووووووووووا
والاستعمال
تشووبيب دايلووار يووارعا يسووتعمه كوعووط ء وواةا عبووا لمعوو :
ومظ وور قا ووه للت ظيووف ملوواوا للللويوواه والخووف سوو ه التظيووف
ا ضاف إلى ملاومتط العالي للاصفرار .
ي المواصفاه الف
تلريبا . 1.62 : الكثاف
من الحجم . % 11 : المواد الصلب
ميكووورون يعتموووف ىلوووك علوووى 23ر لتووور ع وووف سوووماك 6ا 11-12 : معفل الاءتشار
طريل البلا والسبح المراد طلاةط .
ساع يعتمف ىلك على درع الحرارة وسماك الفهان . 1 : زمن الجفاف
. ساع 16 : زمن إعادة البلا
ع .ـلام : المظ ر
غير قا ه للاشتعال . : درع الاشتعال
الفرشاةر الرول ر مسفس الر . : طريل البلا
الما ال لا . : المخفف
يعتمف ىلك على طريل البولا وادداة %63يمكن التخفيف حتى : ءسب التخفيف
المستخفم فا البلا .
ظيفا ، عافا ياليا من أي شواةب أو أغبرة يجب أن يكون السبح ء : إعفاد السبح
أو زيوه .
لـمـاع عولفن أملشن
Golden Gloss Emulsion
A high quality structured, dripless emulsion paint based on acrylic emulsion and some weatherresisting pigments. It is designed to provide good gloss finish on exterior and interior walls andceilings.
PRODUCT DESCRIPTION
For interior and exterior use.Good color retention properties.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying propertiesVery good adhesion properties.Good weather resisting properties.Washable with good scrub resistance.Provides a glossy finish for interior and exterior surfaces.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmoothGlossy1.23 +/- 0.0241 %13-14 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour3-4 hours.( max)Above 2000 cyclesSatisfactoryNANANAApprox. 12 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Golden Gloss Emulsion 6121
Golden Gloss Emulsion
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Golden Gloss Emulsion 6121
�أمل�سن لـمـاع كلا�سيك
1616رقم الكود :
.دهان مائي عالي الجودة مؤسس على مستحلب الأكريليك املشن : الوصف
الخووووووووووووووووووووووووووا
والاستعمال
يسوووتخكط كة نوووي فائيوووي وووي الوووكاال والخوووار علوووى الجوووكران و :
الأسنف والأسةح الاسمنتيه والخش يي , لكيه قوة التصاق عاليي و
.مناومي للاحتكاك
المواصفات الفنيي
تنري ا . 6.61 : الكثا ي
من الحجم . % 12 : المواد الصل ي
ميكورون يعتموك كلوك علوى ةرينوي 13/ لتر عنوك سوماكي 1ط 1-5 : تشارمعكل الا
الةلاء والسةح المراد ةلائه .
دقيني يعتمك كلك على درجي الحرارة وسماكي الكهان . 13-13 : زمن الجفاف
ساعات . 8 : زمن إعادة الةلاء
اعم الملمس . -مةفي : المظفر
غير قابل للاشتعال . : درجي الاشتعال
الفرشاة/ الرولي/ مسكس الرش . : ةريني الةلاء
ماء ني . : المخفف
حسب الأ ظمي العالميي يجب حفظ المنتج وي مكوان بوارد و جواف : س ي التخفيف
.وبعيكا عن درجات الحرارة العاليي والتعرض لأشعي الشمس
يجووب ان يكووون السووةح ظيفووا وجا ووا وااليووا موون شوووائب و : إعكاد السةح
غ ووورة و زيووووت و تلوووووات , ويجوووب ازالوووي الوووكها ات النكيموووي
.والمتنشرة
لماع كلاسيكإملشن
Classic Gloss Emulsion
Classic Gloss Emulsion
�أمل�سن لـمـاع �إقت�سادي
6216رقم الكود :
بلاستيك تشطيب جدران مائي لماع عالي الجودة ، مؤسس على : الوصف كوبوليمر الأكريليك . مستحلب
الخوووووووووووووووووووووووووووا والاستعمال
صوووومم للاسووووتعمال الوووودا لي والخووووارجي با ووووا لووووى سوووو ول :ا نسووياو و اصووي جيوودة للجقووا وم وواوا جيوود للعواموو الجويوو
يم الرائح س الاستعمال .وم اوا لل لويات وعد
المواصقات القني
ت ريبا . 2121 : الكثا
من الحجم . %12 : المواد الصلب
/ لتر يعتمد ذلك على طبيع السطح وطري الطلاء .1ا 9 : معدل الانتشار
ساع يعتمد ذلك على درج الحرارة . 2 : زمن الجقا
ساعات كحد أدنى . 4-3 : زمن عادة الطلاء
ناعم . -لمــــاع : المظ ر
غير قاب للاشتعال . : درج الاشتعال
القرشاة أوالرولا . : طري الطلاء
الماء الن ي . : المخقف
. %21 – 1 : نسب التخقيف
يجووب أن يكووون السووطح مسووت را وجابتووا وجا ووا و اليووا موون ال بووار : عداد السطح لمواد الدهني والشحوا والزيوت والشوائب .والرمال وا
بلاستيك لماع
Economy Gloss Emulsion6126Acrylic Gloss Emulsion
A high quality gloss emulsion paint based on acrylic emulsion and some weatherresisting pigments. It is designed to provide good gloss finish on exterior and interior walls andceilings.
PRODUCT DESCRIPTION
For interior and exterior use.Good color retention properties.Good hiding capacity.Unsaponifiable and alkali resistant.Water vapor permeable.Good flow and drying propertiesVery good adhesion properties.Good weather resisting properties.Washable with good scrub resistance.Provides a glossy finish for interior and exterior surfaces.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmoothGlossy1.15 +/- 0.0227 %9 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)NAApprox 1 hour3-4 hours.( max)Above 2000 cyclesSatisfactoryNANANAApprox. 12 hours.
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Economy Gloss Emulsion6126Acrylic Gloss Emulsion
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat ofPliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
15-20Pure water
NANA
10-15%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
�أمل�سن ن�سف لـمـاع جولدن
1654رقم الكود :
مؤسس - نصف لماع -الملمس دهان بلاستيك املشن حريري : الوصف
على مستحلب أكريليك املشن مائي .
الخووووووووووووووووووووووووووا
والاستعمال
تشطيب املشن ناعم يستعمل في الخارج والداخل يتميز بمقاومتو :
الشديدة ، عديم الاصفرار ، مقاوم للخدش ، سهل الغسيل .
المواصفات الفنية
تقريبا . 6.66 : افةالكث
من الحجم . % 22 : المواد الصلبة
ميكوورون يعتموود علووك علووى بيعووة 20/ لتوور عنوود سووماكة 2م 66 : معدل الانتشار
السطح و ريقة الطلاء .
دقيقة يعتمد علك على سماكة الدهان و درجة الحرارة 620 - 00 : زمن الجفاف
ساعات. 4 : زمن إعادة الطلاء
درجة ( . 10عند زاوية % 00 – 25نصف لماع ) : المظهر
غير قابل للاشتعال . : درجة الاشتعال
الفرشاة /الرولة / مسدس الرش . : ريقة الطلاء
الماء النقي . : المخفف
يعتمووود علوووك علوووى ريقوووة الطووولاء % 65يمكووون التخفيوووف حتوووى : نسبة التخفيف
والأداة المستخدمة في الرش .
يجب أن يكون السطح نظيفا ، جافا خاليا من أي شوائب أو أغبرة : حإعداد السط
أو زيوت .
دنـنصف لـمــاع جـولإملشن
Golden Semi Gloss EmulsionRS-6154Rose Semi-gloss Emulsion
A euperior quality semi-gloss plastic emulsion paint based on acrylic emulsion and some inertpigments. It is designed for very good durability of exterior and interior finishes.
Product Description:
It is reecommended for the interior and exterior surfaces like concretes , plasters, cement rendering,blocks, asbestos, plaster board, wood finishes etc. This product has very good weather resistanceand excellent scrub resistance. It is easily washable with water.It provides satin finish, good colorretention and good hiding power.
Principal Uses:
White or any requested color
1.11 +/- 0.02
22 %
11 sq. mt/ lt at 20 micron DFT(depends upon the substrate condition &method of application)
NA
Above 1000 cycles
NA
NA
Approx. 4 hours.
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
Surface Preparation:
Storage
Technical Data:
Overcoat Interval
Pot Life
Flash Point
Washability
Mixing Ratio
Theoretical Spreading Rat
Volume Solids %
Density (gm/cc)
Color
The product must be stored in accordance with national regulations.The product must be kept in acool and well-ventilated place ,protected from heat and direct sunlight.
Semi-glossFinish
Golden Semi Gloss Emulsion
Paint System Advice:
Application Guidelines:Air spray / Airless spray
10-15NA 5-10%Volume of Thinner
Application condition :Humidity and temperature should be max 70% and min 10 deg.celrespectively
Range Typical Max Min
Wet Film Thickness (micron) : 115 135 115
Dry Film Thickness (micron) : 25 30 25
Temperature
Drying Time (S/D) : 3 hrs. 1 hr. 30 min.
Dry Time (H/D) : 12 hrs. 4 hrs. 2 hrs.
Apply 1 coat of Rose Masonry Primer ( RS-6498 ) / equivalent primer sealer.
Water based putty ( RS-6350 ) can be applied and which can be sanded ,cleanedand dried before the application of top coat finishes.
Top coat 1-2 coats of RS-6154 as top coat can be applied over the filler coat .
Filler coat
Primer coat
Brush/Roller
Clean water Clean waterType of Thinner
0.021"Nozzle Orifice
2100 PSINozzle Pressure
Safety Precaution: : Avoid contact with eyes and prolonged contact with skin. Incase of skin contact,wash thoroughly with soap and water .For eye contact flush plenty of water and seek a physian .
Keep containers tightly closed when not in use .
Application Details
15 CO O25 C O40 C
Specific Tools Used
�أمل�سن ن�سف لـمـاع كلا�سيك
:
:
:
:
:
:
:
:–
:
:
:
:
:
Classic Semi Gloss Emulsion
Classic Semi Gloss Emulsion
�أمل�سن ربع لـمـعـة جولدن 4161رقم الكود :
.دهان مائي عالي الجودة مؤسس على مستحلب الأكريليك املشن : الوصف
الخووووووووووووووووووووووووووا والاستعمال
يسوووتخكط كة نوووي فائيوووي وووي الوووكاال والخوووار علوووى الجوووكران و :
الأسنف والأسةح الاسمنتيه والخش يي , لكيه قوة التصاق عاليي و
مناومي للاحتكاك . المواصفات الفنيي
. 1.82 : الكثا ي
تنري ا
.حسب اللون المةلوب : اللون
من الحجم . % 73 : المواد الصل ي
ميكورون يعتموك علوى 73متر مربع / لتور عنوك سوماكي 17-18 : معكل الا تشار وع السةح و طريني التنفيذ (
سووواع 6 : زمن الجفاف
يعتموووك لوووك علوووى سوووماكي الوووكهان و در وووي ، ات تنري وووا الحرارة .
. ربع لامع : المظفر
غير قابل للاشتعال . : در ي الاشتعال
شفر من تاريخ الإ تا . 18 : مكة التخزين
. الأمشاطالفرشاة /الرولي / : طريني الةلاء
الماء النني . : المخفف
%13-5 : س ي التخفيف
من أي شوائب أو أغ : إعكاد السةح
االيا
، ا ا
رة يجب أن يكون السةح ظيفا أو زيوت .
مساكن ماكس - ربع لمعة
Golden Quater Gloss EmulsionRS-6141 Egg-shell Emulsion White
A high quality egg-shell acrylic emulsion paint based on acrylic emulsion and some inertpigments. It is designed for very good durability of exterior and interior finishes and had goodanti-crack resistance.
Product Description:
It is recommended for the interior and exterior surfaces like concretes , plasters, cement rendering,blocks, asbestos, plaster board, wood finishes etc. This product has very good weather resistanceand excellent scrub resistance. It is easily washable with water.It provides egg-shell finish, good color retention and good hiding power. It has good water vapour permeable behaviour.
Principal Uses:
White or any requested color
1.28+/- 0.02
37 %
12-13sq. mt/ lt at 30 micron DFT(depends upon the substrate condition &method of application)
NA
Above 2000 cycles
NA
NA
Approx. 4 hours.
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
Surface Preparation:
Storage
Technical Data:
Overcoat Interval
Pot Life
Flash Point
Washability
Mixing Ratio
Theoretical Spreading Rat
Volume Solids %
Density (gm/cc)
Color
The product must be stored in accordance with national regulations.The product must be kept in acool and well-ventilated place ,protected from heat and direct sunlight.
Egg-shellFinish
Golden Quater Gloss EmulsionApplication Details:
Paint System Advice:
Application Guidelines:Air spray / Airless spray
0-5%10-15 5-10%Volume of Thinner
Application condition :Humidity and temperature should be max 70% and min 10 deg.celrespectively
Range Typical Max Min
Wet Film Thickness (micron) : 80 105 102
Dry Film Thickness (micron) : 30 40 35
Temperature
Drying Time (S/D) : 3 hrs. 1 hr. 30 min.
Dry Time (H/D) : 12 hrs. 4 hrs. 2 hrs.
Apply 1 coat of Rose Masonry Primer ( RS-6498 ) / equivalent primer sealer.
Water based putty ( RS-6370 ) can be applied and which can be sanded ,cleanedand dried before the application of top coat finishes.
Top coat 1-2 coats of RS-6141 as top coat can be applied over the filler coat .
Filler coat
Primer coat
Brush/Roller
water waterType of Thinner
1.5-2.0 mm 0.022"Nozzle Orifice
3-5 bar 2100 psiNozzle Pressure
Safety Precaution: : Avoid contact with eyes and prolonged contact with skin. Incase of skin contact,wash thoroughly with soap and water .For eye contact flush plenty of water and seek a physian .
Keep containers tightly closed when not in use .
Application Details
15 CO O25 C O40 C
Specific Tools Used
Egg-shell Emulsion White RS-6141
�أمل�سن ربع لـمـعـة كـلا�سيك
1608رقم الكود :
.دهان مائي عالي الجودة مؤسس على مستحلب الأكريليك املشن : الوصف
الخووووووووووووووووووووووووووا والاستعمال
يسوووتخكط كة نوووي فائيوووي وووي الوووكاال والخوووار علوووى الجوووكران و :
الأسنف والأسةح الاسمنتيه والخش يي , لكيه قوة التصاق عاليي و
مناومي للاحتكاك .
المواصفات الفنيي
تنري ا . 6.52 : الكثا ي
.حسب اللون المةلوب : اللون
من الحجم . % 43 : المواد الصل ي
ميكورون يعتموك علوى 48متر مربع / لتور عنوك سوماكي 65-66 : معكل الا تشار وع السةح و طريني التنفيذ (
يعتمك ذلك على سماكي الكهان و درجي الحرارة . ساعي ، 3- 4 : زمن الجفاف
. مةفي : المظفر
غير قابل للاشتعال . : درجي الاشتعال
شفر من تاريخ الإ تا . 65 : مكة التخزين
. الأمشاطالفرشاة /الرولي / : طريني الةلاء
الماء النني . : المخفف
%68-2 : س ي التخفيف
رة يجب أن يكون السةح ظيفا ، جا ا االيا من أي شوائب أو أغ : إعكاد السةح أو زيوت .
املشن ربع لمعة كلاسيك
Classic Quater Gloss Emulsion
Classic Quater Gloss Emulsion
Textureر�ســـة
ر�ســـــة جــــولدن
6251Texture Medium
A high quality medium texture finish based on acrylic emulsion pigmented with granulates , pigments and extenders.It is suitable for interior and exterior wall and ceilings resulting ina medium terxtured finish.
PRODUCT DESCRIPTION
For interior and exterior use.Good weather resistant.Good adhesion properties.Unsaponifiable and alkali resistant.Water vapor permeable.Good color-retention properties.Can be used to create a variety of texture patterns.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.80 +/- 0.0258 %0.5 - 1 kg/ sq. mt.(depends upon the substrate condition & method ofapplication)NAApprox 1 - 2 hours.4 - 6 hours.( max)NASatisfactoryNANANANA
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Golden Texture
6251Texture Medium
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.Use Hopper gun , worm pump for spray application.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates which are powdery , should be primed with one coat ofPliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
0 - 3%Pure water.
0 - 4%Pure water
0 - 3%
Pure water
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Golden Texture
ر�ســـــة كــلا�ســيك
6242Rullato White
An economical quality texture finish based on acrylic emulsion pigmented with granulates, pigmentsand extenders. It is suitable for interior and exterior walls and ceilings resulting in a texturedcoarse finish.
PRODUCT DESCRIPTION
For interior and exterior use.Developed to provide rounded and pressed pattern texture finish.Less dust pick-up due to pressed properties.Good weather resistant.Unsaponifiable and alkali resistant.Water vapor permeable.Outstanding impact resistant.Can be used to create a variety of texture patterns.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.75 +/- 0.0255 %1--2 kg/ sq. mt. (depends upon the substrate condition & method ofapplication)NAApprox 1-2 hours.4-6 hours.( max)NASatisfactoryNANANANA
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Classic Texture
6242Rullato White
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.Use Hopper gun , worm pump for spray application.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates whicn are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
0-3%Pure water.
0-4%Pure water
NA
NA
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Classic Texture
ر�ســـــة �إقـت�سـادي
6241Texture Coarse
A superior quality texture finish based on acrylic emulsion pigmented with granulates, pigmentsand extenders. It is suitable for interior and exterior walls and ceilings resulting in a texturedcoarse finish.
PRODUCT DESCRIPTION
For interior and exterior use.Developed to provide rounded and pressed pattern texture finish.Less dust pick-up due to pressed properties.Good weather resistant.Unsaponifiable and alkali resistant.Water vapor permeable.Outstanding impact resistant.Can be used to create a variety of texture patterns.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.77 +/- 0.0260 %1--2 kg/ sq. mt. (depends upon the substrate condition & method ofapplication)NAApprox 1-2 hours.4-6 hours.( max)NASatisfactoryNANANANA
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Economy Texture
6241Texture Coarse
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.Use Hopper gun , worm pump for spray application.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates whicn are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
0-3%Pure water.
0-4%Pure water
NA
NA
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
Economy Texture
Graffiatoجـر�فـيـاتـو
جـر�فياتو خـ�ســن جــــولدن
Golden Graffiato Profile6203 Graffiato
A high quality wall texture finish based on acrylic emulsion pigmented with weather resistingpigments and quartz granulates. It is designed to provide unique texture finishes on walls andcelings.
PRODUCT DESCRIPTION
For interior and exterior use.Good color retention properties.Good weather resistant.Unsaponifiable and alkali resistant.Water vapor permeable.Outstanding impact resistant.Can be used to create a variety of texture patterns.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.88 +/- 0.02 71%2--3 kg/ sq. mt. (depends upon the substrate condition & method ofapplication)NAApprox 1-2 hours.4-6 hours.( max)N/ASatisfactoryNANANANA
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Golden Graffiato Profile6203 Graffiato
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.The plastic trowel for structuring has to be roughened before use.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates whicn are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
NANA
NANA
Ready for use
Not recommended.
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner
جـر�فياتو نـاعــم جــــولدن
2651رقم الكود :
تشطيب جرافياتو عالي الجودة مؤسس على متىلبلب اريريليى : الوصف
ناعم وخالي من حبيبات الكوارتز) بدون حصوة ( .
الخىىىىىىىىىىىىىىىىىىىىىىىىىوا
والاسلعمال
يتىىىلعمي فىىىي الىىىداخي والخىىىاري يعطىىىي تشىىىطيب جميىىىي م ىىىاو :
للظىىىرول الجويىىىر الخارجيىىىر با مىىىافر لألىىى م اوملىىى ر ىىىعر
واحلفاظ باللون . الشمس
المواصفات الفنير
ت ريبا . 5.11 : الكثافر
من الوزن . % 21 : المواد الصلبر
يعلمىىىد لىىى علىىى مري ىىىر العمىىىي وارداة 6ييلىىىوجرا 3 - 6 : معدل الانلشار
المتلخدمر .
ساعات . 6-5 : زمن الجفال
ابيض أو أي لون من يلالوي الجرافياتو . –مطفي : المظهر
غير قابي للا لعال . : درجر الا لعال
البروة المتطرين . : مري ر الطلاء
الماء الن ي . : المخفف
ويفضىىي %6لا يبلىىاي لألىى تخفيىىف لألا بنتىىب بتىىيطر لا تلجىىاوز : نتبر اللخفيف
عد تخفيف .
جافا خاليا من أي وائب أو أغبرة يجب أن يكون التطح نظيفا : لأعداد التطح
أو زيوت .
ناعم جولدن جرافياتو
Golden Fine Graffiato6215 Graffiato FINE S F
A high quality wall texture finish based on acrylic emulsion pigmented with weather resistingpigments and free from any stones. It is designed to provide unique texture finishes on walls andcelings.
PRODUCT DESCRIPTION
For interior and exterior use.Good color retention properties.Good weather resistant.Unsaponifiable and alkali resistant.Water vapor permeable.Outstanding impact resistant.Can be used to create a variety of texture patterns.Almost odourless and easy to apply.
PRODUCT USE
White or any requested colorSmooth/ FlatMatt1.85 +/- 0.02 65%2--3 kg/ sq. mt. (depends upon the substrate condition & method ofapplication)NAApprox 1-2 hours.4-6 hours.( max)N/ASatisfactoryNANANANA
Concrete, masonry, cement rendering and plasters etc.
SUBSTRATES
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose oldpaints, dirt, grease, wax and any other contaminations.
SURFACE PREPARATION & CONDITION
Shelf Life
CHARACTERSTICS
12 months from date of production.Overcoat IntervalPot LifeFlash PointFlexibility of Paint FilmAdhesion of Paint FilmWashabilityDrying Time (H/DDrying Time (S/D)Mixing Ratio
Theoretical CoverageVolume Solids %Density gm/ccGlossFinishColor
Golden Fine Graffiato6215 Graffiato FINE S F
Paint should be mixed thoroughly before the application.Ensure proper ventillation during application and drying.Close the drum properly and clean the equipments once the application is over.The plastic trowel for structuring has to be roughened before use.
Pure waterd) Cleaning Solvent
APPLICATION DETAILS
Ensure cement based and plastered surfaces are dry enough and properly cleaned.All dirts, powders,laitance and other contaminations must be removed.Prime with one coat of Masonry Primer , Acrylic Sealer.Gypsum containing materials and substrates whicn are powdery , should be primed with one coat of Pliolite Sealer.Lime containing materials must be made neutral by flushing with pure water.
Remove all blistered, cracked, brittle and poorly adhering paints or any other contaminations from thesurface.Good intact wall paint layers must be cleaned with 3% ammonia solution in water.Glossy paint must be sanded properly.
a) For New Sustrates
b) Old Sustrates
PAINT SYSTEM ADVICES
APPLICATION GUIDELINE & INSTRUMENT FOR USE:
a) Brush, Roller & Others
Volume of Thinner
Recommended Thinner
b) Air Spray
c) Airless Spray
NANA
NANA
Ready for use
Not recommended.
Volume of Thinner
Recommended Thinner
Volume of ThinnerRecommended Thinner