Upload
hugo-morris
View
212
Download
0
Embed Size (px)
Citation preview
1
A Low Power High-Speed 8-Bit Pipelining CLA Design Using Dual-Threshold Voltage Domino Logic
Chua-Chin Wang, Chi-Chun Huang, Ching-Li Lee, and Tsai-Wen Cheng
Very Large Scale Integration (VLSI) Systems, IEEE Transactions on Volume 16, May 2008, Page(s):594 - 598
Adviser : Kai-Cheng Wei
Postgraduate : Chiuan-Tai Xiao
Number : 96662011
Date : 2008.11.24
National Changhua University of Education
Graduate Institute of Integrated Circuit Design
2
Outline
Abstract
Low-power high-speed 8-bit CLA
Simulations and implementation
Conclusion
3
Abstract A high speed and low power 8-bit carry-lookahead adder using t
wo-phase modified dual-Vt domino logic blocks which are arranged in a PLA-like design style with pipelining is presented.
The modified domino logic circuits employ dual-Vt transistors and reversed bulk-source biases for reducing subthreshold leakage current when advanced deep submicrometer process is used.
The proposed dynamic power consumption is also drastically reduced by more than 10% by the measurement results on silicon.
4
Low-power high-speed 8-bit CLA
a. Typical dual-Vt domino logic circuits
precharge phase
10
01
evaluation phase
5
Typical two-stage dual-Vt domino logic circuit to construct a pipeline structure
6
b. Modified dual-Vt domino logic circuits
7
c. High-Vt transistor with reverse-biased bulk-source voltage
In the simulation, Vdd=1.8V, VB=3V, T=25 C.
8
d. PLA-styled 8-bit CLA design(1)
Ci+1 = Gi + Pi ● Ci
Gi=Ai ● Bi
Pi = Ai xor Bi
NOT-OR plane
9
d. PLA-styled 8-bit CLA design(2)
10
e. Cycle-based operation and area analysis
An 8-bit adder using our proposed design, the overalltransistor count is 882.
11
Simulations and implementation(1)
To reveal the power-saving advantage of the proposed low power design, two 8-bit CLAs are, respectively, implemented by the modified single-Vt domino logic and the modified dual-Vt domino logic using the same CMOS process.
The two CLAs implemented by TSMC 0.18-µm 1P6M CMOS process.
12
Simulations and implementation(2)
13
Simulations and implementation(3)
14
Simulations and implementation(4)
15
16
17
Conclusion
We propose a low-power high-speed PLA-styled dual-Vt domino logic design for adder implementation.
A modified dual-Vt domino logic circuit is used for pipelining structure and the unnecessary power consumption is avoided.
Not only is the correctness of the function in the gigahertz range preserved, the power dissipation is also reduced.
The PLA-styled dual-Vt domino logic structure using only one clock makes the result of an 8-bit adder appear in two cycles.
18
Thanks for your attention.