Upload
kelley-sullivan
View
217
Download
0
Embed Size (px)
DESCRIPTION
3 CREDITTITLENCCSScRtHcHsDCWD MR P1 Storage and Collection of Recyclables R MR P2 Construction and Demolition Waste Management Planning R MR C1 Building Life-Cycle Impact Reduction 565 MR C2 Building Product Disclosure and Optimization - Environmental Product Declarations 2 MR C3 Building Product Disclosure and Optimization – Sourcing of Raw Materials 2
Citation preview
© 2015 Green Building Academy. All rights reserved. 1
Chapter : 6Materials and Resources
© 2015 Green Building Academy. All rights reserved. 2
Disclaimer
LEED® and USGBC® are registered trademarks of the U.S. Green Building Council. The author is not affiliated to USGBC or GBCI. The information provided in the presentation are compiled by the author and is not endorsed by USGBC or GBCI
© 2015 Green Building Academy. All rights reserved. 3
CREDIT TITLE NC CS Sc Rt Hc Hs DC WD
MR P1 Storage and Collection of Recyclables R
MR P2 Construction and Demolition Waste Management Planning R
MR C1 Building Life-Cycle Impact Reduction 5 6 5
MR C2Building Product Disclosure and Optimization - Environmental Product Declarations
2
MR C3Building Product Disclosure and Optimization – Sourcing of Raw Materials
2
© 2015 Green Building Academy. All rights reserved. 4
CREDIT TITLE NC CS Sc Rt Hc Hs DC WD
MR C4Building Product Disclosure and Optimization – Material Ingredients
2
MR C5 Construction and Demolition Waste Management 2
© 2015 Green Building Academy. All rights reserved. 5
CREDIT TITLE Only for Healthcare
MR P3 PBT Source Reduction--Mercury Required
MR C6 PBT Source Reduction--Mercury 1
MR C7 PBT Source Reduction--Lead, Cadmium, and Copper 2
MR C8 Furniture and Medical Furnishings 2MR C9 Design for Flexibility 1
© 2015 Green Building Academy. All rights reserved. 6
MR P1 Storage and Collection of Recyclables
Design
NC CS Sc Rt Hc Hs DC WD
Required
© 2015 Green Building Academy. All rights reserved. 7
Intent
• Reduce the waste that is generated by building occupants and hauled to and disposed of in landfills.
© 2015 Green Building Academy. All rights reserved. 8
Requirements
• Provide dedicated areas accessible to waste haulers and building occupants for the collection and storage of recyclable materials for the entire building.
• Collection and storage areas may be in separate locations.
• Recyclable materials must include mixed paper, corrugated cardboard, glass, plastics, and metals.
• Take appropriate measures for the safe collection, storage, and disposal of two of the following:• Batteries, • Mercury-containing lamps• Electronic waste.
© 2015 Green Building Academy. All rights reserved. 9
• Conduct a waste stream study to identify the retail project’s top five recyclable waste streams, for 24 Hrs.
• Provide storage and collection space for top four waste streams• If no information is available on waste streams for the project, use
data from similar operations to make projections.• Retailers with existing stores of similar size and function can use
historical information from their other locations.• Provide dedicated areas accessible to waste haulers and building
occupants for the separation, collection, and storage of recyclable materials.
• If any of the top four waste streams are batteries, mercury-containing lamps, or electronic waste, take appropriate measures for safe collection, storage, and disposal.
Requirements – Retail only
© 2015 Green Building Academy. All rights reserved. 10
Strategies
Signage Requirements
© 2015 Green Building Academy. All rights reserved. 11
Strategies
Do not contaminate
© 2015 Green Building Academy. All rights reserved. 12
Strategies
Ensure security of high value recyclable materials & information
© 2015 Green Building Academy. All rights reserved. 13
Documentation
Documentation All Projects Retail Only
Verification of recycled material types Narrative describing recycling storage and collection strategies Floor plans indicating recycling storage and collection areas Methodology and results of waste stream study
© 2015 Green Building Academy. All rights reserved. 14
MR P2, C5 Construction and Demolition Waste Management
Planning & Implementation
ConstructionNC CS Sc Rt Hc Hs DC WD
Required
NC CS Sc Rt Hc Hs DC WD
2
© 2015 Green Building Academy. All rights reserved. 15
Intent
• Reduce construction and demolition waste disposed of in landfills and incineration facilities by recovering, reusing, and recycling materials.
© 2015 Green Building Academy. All rights reserved. 16
Requirements - Prerequisite• Develop and implement a construction and demolition waste
management plan• Establish waste diversion goals for the project by identifying at
least five materials (both structural and nonstructural) targeted for diversion. Approximate a percentage of the overall project waste that these materials represent
• Specify whether materials will be separated or commingled and describe the diversion strategies i.e. where the material will be taken and how the recycling facility will process the material.
• Excavated soil, land clearing debris and alternate daily covers (ADC) are not considered in the calculation
• Provide a final report detailing all major waste streams generated, including disposal and diversion rate
© 2015 Green Building Academy. All rights reserved. 17
Requirements – Credit: Option 1
• Waste stream should constitute at least 5% by weight or volume of the project's totaled diverted waste.
• The waste stream can be a material category that is diverted or a mixture of several material categories that are diverted.
• The commingled materials count as one stream even though the hauler separates them out later off site.
• Waste to Energy can be considered if approved by relevant standards
OPTION 1: DIVERSION (1 TO 2 POINTS)
Path 1 – 50% Minimum 3 material streams (1 point)Path 2 – 75% Minimum 4 material streams (2 point)
© 2015 Green Building Academy. All rights reserved. 18
OPTION 2. REDUCTION OF TOTAL WASTE MATERIAL (2 POINTS)Do not generate more than 2.5 pounds of construction waste per square foot (12.2 kilograms of waste per square meter) of the building’s floor area.
Requirements – Credit : Option 2
Maximum waste – 2.5 lbs / SF
Source Reduction Strategies• Expose structural elements• Building Information Modeling• Advanced framing• Standard sizes• Steel framing
© 2015 Green Building Academy. All rights reserved. 19
Exclusions from Waste Calculation
• Excavated soil
• Land-clearing debris
• Alternative daily cover
© 2015 Green Building Academy. All rights reserved. 20
Calculation & Documentation
Documentation Option -1 Option -2
MR Construction and Demolition Waste Management calculator or equivalent tool, tracking total and diverted waste amounts and material streams
Documentation of recycling rates for commingled facilities (if applicable) Justification narrative for use of waste-to-energy strategy (if applicable) Documentation of waste-to-energy facilities adhering to relevant EN standards (if applicable) Total waste per area
Diversion rate=100 𝑥 𝑇𝑜𝑡𝑎𝑙𝑤𝑎𝑠𝑡𝑒 𝑑𝑖𝑣𝑒𝑟𝑡𝑒𝑑 𝑓𝑟𝑜𝑚𝑙𝑎𝑛𝑑𝑓𝑖𝑙𝑙𝑇𝑜𝑡𝑎𝑙𝑤𝑎𝑠𝑡𝑒𝑝𝑟𝑜𝑑𝑢𝑐𝑒𝑑
© 2015 Green Building Academy. All rights reserved. 21
• Achieve both Option 1 (either Path 1 or Path 2) and Option 2
Exemplary Performance
© 2015 Green Building Academy. All rights reserved. 22
MR C1 Building Life-Cycle Impact Reduction
Construction
NC CS Sc Rt Hc Hs DC WD
5 6 5
© 2015 Green Building Academy. All rights reserved. 23
Intent
• Encourage adaptive reuse and optimize the environmental performance of products and materials.
© 2015 Green Building Academy. All rights reserved. 24
Requirements
Preserve
Restore
Reuse
Reduce Life cycle impact
Option 1: Historic building reuse(5 points)
Option 2: Renovation of abandoned or blighted building (5 points)
Option 3: Building and Material reuse (2 to 4 points)
Option 4: Whole Building life-cycle assessment (3 points)
(or)
(or)
(or)
© 2015 Green Building Academy. All rights reserved. 25
(5 POINTS BD+C, 6 POINTS CORE AND SHELL)
• Maintain the existing building structure, envelope, and interior nonstructural elements of a historic building or contributing building in a historic district.
• To qualify, the building or historic district must be listed or eligible for listing in the local, state, or national register of historic places.
• Do not demolish any part of a historic building or contributing building in a historic district unless it is deemed structurally unsound or hazardous.
• Demolition, alteration or renovation shall be based on approval of historic board
Requirements - Option 1.Historic Building Reuse
© 2015 Green Building Academy. All rights reserved. 26
(5 POINTS BD+C, 6 POINTS CORE AND SHELL)
• Maintain at least 50%, by surface area, of the existing building structure, enclosure, and interior structural elements for buildings that meet local criteria of abandoned or are considered blighted.
• The building must be renovated to a state of productive occupancy.
• Up to 25% of the building surface area may be excluded from credit calculation because of deterioration or damage.
Requirements - Option 2. Renovation of Abandoned or Blighted Building
© 2015 Green Building Academy. All rights reserved. 27
(2–4 POINTS BD+C, 2-5 POINTS CORE AND SHELL)• Reuse or salvage building materials from off site or on site as a
percentage of the surface area, as listed in Table 1.• Include structural elements (e.g., floors, roof decking), enclosure
materials (e.g., skin, framing), and permanently installed interior elements (e.g., walls, doors, floor coverings, ceiling systems).
• Exclude window assemblies/hazardous materials from calculation.• Materials contributing toward this credit may not contribute
toward MR Credit Material Disclosure and Optimization.
Requirements - Option 3. Building and Material Reuse
© 2015 Green Building Academy. All rights reserved. 28
Requirements - Option 4. Whole-building Life-cycle Assessment (3 points)
10% minimum reduction in at least 3 impact categories(GWP is a must)
Baseline Building• Size• Function• Orientation• Operating energy• Service Life
60 Years of service life
Impact Categories• Global warming potential• Stratospheric Ozone depletion• Acidification of land + water• Eutrophication• Tropospheric Ozone formation• Depletion of non-renewable
energy resources
© 2015 Green Building Academy. All rights reserved. 29
Lifecycle Assessment
© 2015 Green Building Academy. All rights reserved. 30
LCA componentsThe following parameters must match in the base case and proposed case comparison: • LCA scope • Size • Function • Orientation • Location (climate zone) • Operating energy efficiency Products• Building envelope• Structural elements• Roof assemblies• Structural floors and ceilings• Parking Structures
© 2015 Green Building Academy. All rights reserved. 31
Documentation
Documentation Option -1 Option -2 Option -3 Option -4
Documentation of historic designation status Narrative describing demolition (if any) Documentation of how additions and alterations (if any) meet local review board requirements Narrative describing abandoned or blighted status Reused elements table and calculations Description of LCA assumptions scope, and analysis process for baseline building and proposed building Life-cycle impact assessment summary showing outputs of proposed building with percentage change from baseline building for all impact indicators
© 2015 Green Building Academy. All rights reserved. 32
• Option 1. Not available.• Option 2. Not available.• Option 3. Reuse 95% of the building.• Option 4. Achieve any improvement over
the required credit thresholds in all six impact measures
Exemplary Performance
© 2015 Green Building Academy. All rights reserved. 33
MR C2 Building Product Disclosure and Optimization - Environmental
Product Declarations
Construction
NC CS Sc Rt Hc Hs DC WD
2
© 2015 Green Building Academy. All rights reserved. 34
Intent
• Encourage the use of products and materials for which life-cycle information is available and that have environmentally, economically, and socially preferable life-cycle impacts.
• Reward project teams for selecting products from manufacturers who have verified improved environmental life-cycle impacts.
© 2015 Green Building Academy. All rights reserved. 35
Requirements
Option 1: Environmental Product Declaration (EPD)(1 point)
Option 2: Multi-attribute optimization(1 point)
(and / or)
© 2015 Green Building Academy. All rights reserved. 36
• Environmental Product Declaration (EPD),is a standardized way of quantifying the environmental impact of a product or system. Typically, an EPD will include information about a product’s impact on global warming, ozone depletion, water pollution, ozone creation, and greenhouse gas
• Download a sample EPD http://www.armstrong.com/common/c2002/content/files/72237.pdf
• Credit awarded based on number of products from different manufacturers having EPDs
Environmental Product Declarations
© 2015 Green Building Academy. All rights reserved. 37
How EPDs are developed?Product Category
Rule (PCR)
Life Cycle Assessment (LCA)
Environmental
Product Declaratio
n (EPD)
© 2015 Green Building Academy. All rights reserved. 38
© 2015 Green Building Academy. All rights reserved. 39
Requirements – Option 1 EPDs
20 different products from 5 different manufacturesType Counted as Example
Product Specific Type III EPD 1 20
Industry-wide (generic) EPD ½ 40
Product Specific Declaration ¼ 80
© 2015 Green Building Academy. All rights reserved. 40
50% by cost
Requirements – Option 2Multi-attribute optimization
Use products that demonstrate impact reduction below industry average.
3 out of 6 from the below
• Global warming potential• Stratospheric Ozone depletion• Acidification of land + water• Eutrophication• Tropospheric Ozone formation• Depletion of non-renewable energy
resources
© 2015 Green Building Academy. All rights reserved. 41
0.25, 0.5 or 1 based on option 1
2 if product extracted, manufactured, purchased within 100mile
Actual or 45% of construction cost
Calculation
© 2015 Green Building Academy. All rights reserved. 42
Documentation
Documentation Option -1 Option -2
MR building product disclosure and optimization calculator or equivalent tracking tool EPD and LCA reports or compliant summary documents for 100% of products contributing toward credit Documentation of compliance with USGBC-approved program
© 2015 Green Building Academy. All rights reserved. 43
• Option 1. Source at least 40 qualifying products from five
manufacturers
• Option 2. Purchase 75%, by cost, of permanently installed building
products that meet the required attributes
Exemplary Performance
© 2015 Green Building Academy. All rights reserved. 44
MR C3 Building Product Disclosure and Optimization – Sourcing of
Raw Materials
Construction
NC CS Sc Rt Hc Hs DC WD
2
© 2015 Green Building Academy. All rights reserved. 45
Intent
• Encourage the use of products and materials for which life cycle information is available and that have environmentally, economically, and socially preferable life cycle impacts.
• Reward project teams for selecting products verified to have been extracted or sourced in a responsible manner.
© 2015 Green Building Academy. All rights reserved. 46
Requirements
Option 1: Raw material source and extraction reporting1 point
Option 2: Leadership extraction practices 1 point
(and / or)
© 2015 Green Building Academy. All rights reserved. 47
• Self Declared Products = 0.5
• Products with third-party verified corporate sustainability reports (CSR) = 1
Requirements – Option 1 Raw Material Source and Extraction Reporting
20 different products from 5 different manufactures
Frameworks• GRI Sustainability Report• OECD Guidelines• UN Global Compact• ISO 26000• Other USGBC Program
© 2015 Green Building Academy. All rights reserved. 48
Requirements – Option 2 Leadership Extraction Practices
25% by cost
Use products that meet at least one of the below responsible extraction criteria:
• Extended producer responsibility• Bio-based materials• Wood products• Materials reuse• Recycled content• USGBC approved program
© 2015 Green Building Academy. All rights reserved. 49
2 if product extracted,
manufactured, purchased within
100mile
• Bio-based products meeting Sustainable Agriculture Standard, value 1.0, by cost
• Wood products certified to FSC standards, 1.0 value• Reused materials, value 1.0, by cost• Postconsumer recycled materials, value 1.0, by cost• Pre-consumer recycled materials, value 0.5, by cost• Extended producer responsibility, value 0.5, by cost
Criterion & Location valuation factor
© 2015 Green Building Academy. All rights reserved. 50
Documentation
Documentation Option -1 Option -2
MR building product disclosure and optimization calculator or equivalent tracking tool
Corporate sustainability reports for 100% of products contributing toward credit
Documentation of product claims for credit requirements or other USGBC-approved program
© 2015 Green Building Academy. All rights reserved. 51
• Option 1. Source at least 40 qualifying products from five
manufacturers
• Option 2. Purchase 50%, by cost, of permanently installed building
products that meet the responsible
extraction criteria
Exemplary Performance
© 2015 Green Building Academy. All rights reserved. 52
MR C4 Building Product Disclosure and Optimization – Material
Ingredients
Construction
NC CS Sc Rt Hc Hs DC WD
2
© 2015 Green Building Academy. All rights reserved. 53
Intent
• Encourage the use of products and materials for which life-cycle information is available and that have environmentally, economically, and socially preferable life-cycle impacts.
• Reward project teams for selecting products for which the chemical ingredients in the product are inventoried using an accepted methodology and for selecting products verified to minimize the use and generation of harmful substances.
• Reward raw material manufacturers who produce products verified to have improved life-cycle impacts.
© 2015 Green Building Academy. All rights reserved. 54
Requirements
Option 1: Material Ingredient reporting1 point
Option 2: Material Ingredient optimization1 point
(and / or)
(and / or)
Option 3: Product manufacturer supply chain optimization1 point
© 2015 Green Building Academy. All rights reserved. 55
Requirements- Option 1Material Ingredient reporting - 1 point
Use at least 20 different permanently installed products from at least five different manufacturers that use any of thefollowing programs to demonstrate the chemical inventory of the product to at least 0.1% (1000 ppm)
• Manufacturer inventory
• Health product declaration
• Cradle to Cradle certification
• USGBC approved program
© 2015 Green Building Academy. All rights reserved. 56
Requirements..• Manufacturer Inventory. The manufacturer has published complete
content inventory for the product following these guidelines:o A publicly available inventory of all ingredients identified by name and
Chemical Abstract Service Registration Number (CASRN)o Materials defined as trade secret or intellectual property may
withhold the name and/or CASRN but must disclose role, amount and GreenScreen benchmark, as defined in GreenScreen v1.2.
• Health Product Declaration. The end use product has a published, complete Health Product Declaration with full disclosure of known hazards in compliance with the Health Product Declaration open Standard.
• Cradle to Cradle. The end use product has been certified at the Cradle to Cradle v2 Basic level or Cradle to Cradle v3 Bronze level.
• USGBC approved program. Other USGBC approved programs meeting the material ingredient reporting criteria.
© 2015 Green Building Academy. All rights reserved. 57
Requirements: Option 2Material Ingredient optimization - 1 point
Disclosure + Optimization
• GreenScreen v1.2 Benchmark• Cradle to Cradle• REACH Optimization
25% reduction in cost
© 2015 Green Building Academy. All rights reserved. 58
Requirements…• GreenScreen v1.2 Benchmark. Products that have fully inventoried chemical
ingredients to 100 ppm that have no Benchmark 1 hazards:o If any ingredients are assessed with the GreenScreen List Translator, value
these products at 100% of cost.o If all ingredients are have undergone a full GreenScreen Assessment, value
these products at 150% of cost.• Cradle to Cradle Certified. End use products are certified Cradle to Cradle.
Products will be valued as follows:o Cradle to Cradle v2 Gold: 100% of costo Cradle to Cradle v2 Platinum: 150% of costo Cradle to Cradle v3 Silver: 100% of costo Cradle to Cradle v3 Gold or Platinum: 150% of cost
• International Alternative Compliance Path – REACH Optimization. End use products and materials that do not contain substances that meet REACH criteria for substances of very high concern.
• USGBC approved program. Products that comply with USGGBC approved building product optimization criteria.
© 2015 Green Building Academy. All rights reserved. 59
Requirements: Option 3Product manufacturer supply chain optimization - 1point
Supply Chain Optimization
• 25% by cost • 99% by weight
© 2015 Green Building Academy. All rights reserved. 60
• Use materials that are sourced from product manufacturers who engage in validated and robust safety, health, hazard, and risk programs which at a minimum document at least 99% (by weight) of the ingredients used to make the building product or building material, and
• Use material that are sourced from product manufacturers with independent third party verification of their supply chain that at a minimum verifies:o Processes are in place to communicate and transparently prioritize chemical ingredients along the
supply chaino Processes are in place to identify, document, and communicate information on health, safety and
environmental characteristics of chemical ingredientso Processes are in place to implement measures to manage the health, safety and environmental
hazard and risk of chemical ingredientso Processes are in place to optimize health, safety and environmental impacts when designing and
improving chemical ingredientso Processes are in place to communicate, receive and evaluate chemical ingredient safety and
stewardship information along the supply chaino Safety and stewardship information about the chemical ingredients is publicly available
Requirements..
© 2015 Green Building Academy. All rights reserved. 61
• Products meeting Option 3 criteria are valued at 100% of their cost for the purposes of credit achievement calculation.
• For credit achievement calculation of options 2 and 3, products sourced (extracted, manufactured, purchased) within 100 miles (160 km) of the project site are valued at 200% of their base contributing cost. For credit achievement calculation, the value of individual products compliant with either option 2 or 3 can be combined to reach the 25% threshold but products compliant with both option 2 and 3 may only be counted once.
• Structure and enclosure materials may not constitute more than 30% of the value of compliant building products.
Calculation
© 2015 Green Building Academy. All rights reserved. 62
Documentation
Documentation Option -1 Option -2 Option -3
MR building product disclosure and optimization calculator or equivalent tracking tool
Documentation of Chemical inventory through Health Product Declaration, Cradle to Cradle certification labels, manufacturers’ lists of ingredients with GreenScreen assessment reports for confidential ingredients, or USGBC-approved programs (if applicable
Verification of ingredient optimization through Cradle to Cradle certification labels, manufacturers’ lists of ingredients with GreenScreen benchmarks listed for all ingredients, or manufacturers’ declaration (for REACH), or USGBC-approved programs (if applicable)
Documentation of supply chain optimization
© 2015 Green Building Academy. All rights reserved. 63
• Option 1. Source at least 40 qualifying products from five
manufacturers
• Option 2. Purchase 50%, by cost, of permanently installed building
products that meet the credit criteria
Exemplary Performance
© 2015 Green Building Academy. All rights reserved. 64
MR P3 & C6 PBT Source Reduction-Mercury
Design
Healthcare Only
Required
Healthcare Only
1
© 2015 Green Building Academy. All rights reserved. 65
Intent - Prerequisite
• Reduce mercury-containing products and devices and mercury release through product substitution, capture, and recycling.
• Reduce the release of persistent, bioaccumulative, and toxic (PBTs) chemicals associated with the life cycle of building materials.
Intent - Credit
© 2015 Green Building Academy. All rights reserved. 66
PBT
• Persistent, bioaccumulative and toxic (PBTs) substances are a class of compounds that have high resistance to degradation from abiotic and biotic factors, high mobility in the environment and high toxicity.
Reduce, substitute, or replace.
© 2015 Green Building Academy. All rights reserved. 67
Requirements - PrerequisiteAs part of the project’s recycling collection system, identify the following:• Types of mercury-containing products and devices to be
collected;• Criteria governing how they are to be handled by a
recycling program• Disposal methods for captured mercury.
Applicable mercury-containing products and devices include:• Lamps • Dental wastes (such as scrap amalgam, chair side
traps, and separator wastes).
© 2015 Green Building Academy. All rights reserved. 68
Requirements - PrerequisiteComply with 2010 FGI Guidelines for Health Care Facilities:
• New construction: do not use mercury-containing equipment. Lamps are excluded.
• Renovation: develop a plan to phase out mercury-containing products and upgrade current mercury-containing lamps to high-efficiency, low-mercury, or mercury-free lamp technology.
• Do not specify or install preheat, T-9, T-10, or T-12 fluorescents or mercury vapor high-intensity discharge (HID) lamps in the project
© 2015 Green Building Academy. All rights reserved. 69
Requirements - Prerequisite
© 2015 Green Building Academy. All rights reserved. 70
Typical lamp types in a Healthcare project
© 2015 Green Building Academy. All rights reserved. 71
Requirements - CreditSpecify and install fluorescent lamps with both low mercury content and long lamp life, as listed in below
© 2015 Green Building Academy. All rights reserved. 72
Documentation
Documentation All Projects
Existing inventory and phase-out plan (for renovation projects) Recycling plan for mercury-containing lamps Lighting schedule including lamp type and mercury content USGBC’s PBT source reduction calculator (or equivalent documentation)
Documentation All Projects
Lighting schedule (including lamp life hours) Narrative explaining lamps excluded from credit USGBC’s MR PBT source reduction calculator (or equivalent documentation)
For Prerequisite
For Credit
© 2015 Green Building Academy. All rights reserved. 73
MR C7 PBT Source Reduction-Lead, Cadmium and Copper
Construction
Healthcare Only
2
© 2015 Green Building Academy. All rights reserved. 74
Intent
• Reduce the release of persistent, bioaccumulative, and toxic (PBT) chemicals associated with the life cycle of building materials.
© 2015 Green Building Academy. All rights reserved. 75
PBT
• Persistent, bioaccumulative and toxic (PBTs) substances are a class of compounds that have high resistance to degradation from abiotic and biotic factors, high mobility in the environment and high toxicity.
Reduce, substitute, or replace.
© 2015 Green Building Academy. All rights reserved. 76
RequirementsLead
• Specify and use solder and flux to connect (potable water) plumbing pipe that meets the California AB1953 standard
• Specify and use lead-free roofing and flashing• Specify and use electrical wire and cable with lead content less than
300 ppm• Specify no use of interior or exterior paints containing lead.• Renovation projects, ensure the removal and appropriate disposal of
disconnected wires with lead stabilizers, consistent with the 2002 National Electric Code requirements.
• Lead used for radiation shielding and copper used for MRI shielding are exempt
© 2015 Green Building Academy. All rights reserved. 77
RequirementsCadmium• Specify no use of interior or exterior paints containing cadmium.
Copper• For copper pipe applications, reduce or eliminate joint-related
sources of copper corrosion:
o use mechanically crimped copper joint systems; or
o specify that all solder joints comply with ASTM B828 2002, and specify and use ASTM B813 2010 for flux.
© 2015 Green Building Academy. All rights reserved. 78
Documentation
Documentation All Projects
Product documentation demonstrating credit criteria have been met (manufacturer’s data or proof of certification)
Narrative explaining any excluded materials Description of pipe jointing processes (for copper pipe only) Verification of appropriate disposal of wires and lead stabilizers (for renovation projects only)
© 2015 Green Building Academy. All rights reserved. 79
MR C8 Furniture and MedicalFurnishings
Healthcare Only
2
Construction
© 2015 Green Building Academy. All rights reserved. 80
Intent
• Enhance the environmental and human health performance attributes associated with freestanding furniture and medical furnishings.
© 2015 Green Building Academy. All rights reserved. 81
Requirements• Use at least 30% (1 point) or 40% (2 points), by cost, of all
freestanding furniture and medical furnishings (e.g., mattresses, foams, panel fabrics, cubicle curtains, window coverings, other textiles) that meets the criteria in one of the following three options.
• Option 1: Minimal Chemical content(and / or)
• Option 2: Testing and modeling of chemical content(and / or)
• Option 3: Multi-attribute assessment of products
© 2015 Green Building Academy. All rights reserved. 82
Requirements: Option 1Minimal Chemical content• All components that constitute at least 5%, by weight, must contain
less than 100 parts per million (ppm) of at least four of the five following chemical groups:
• Formaldehyde
• Heavy metals
• Chromium in plated finishes
• Stain and non-stick treatments
• Added antimicrobial treatments
© 2015 Green Building Academy. All rights reserved. 83
Requirements : Option 2Testing and modeling of chemical content• All components of a furniture or medical furnishing assembly,
including textiles, finishes, and dyes, must contain less than 100 parts per million (ppm) of at least two of the five chemicals listed in Option 1.
• Meet BIFMA Standards, using either the concentration modeling approach or the emissions factor approach
• Model the test results
© 2015 Green Building Academy. All rights reserved. 84
Requirements : Option 3Multi-attribute assessment of products• Use products that meet at least one of the criteria below. Each
product can receive credit for each criterion met. The scope of any environmental product declaration (EPD) must be at least cradle to gate.
• Materials reuse• Recycled content• Extended producer responsibility• Bio-based materials• Certified wood
• Product specific declaration -- valued as (1/4)• Industry-wide (generic) EPD -- valued as (1/2)• Product-specific Type III EPD -- valued as (1)
© 2015 Green Building Academy. All rights reserved. 85
Documentation
Documentation Option 1 Option 2 Option 3
MR furniture and medical furnishings calculator provided by USGBC Documentation of product claims for credit criteria
© 2015 Green Building Academy. All rights reserved. 86
• Use at least 50%, by cost, of all freestanding furniture and medical furnishings that meet the credit criteria
Exemplary Performance
© 2015 Green Building Academy. All rights reserved. 87
MR C9 Design for Flexibility
Design
Healthcare Only
1
© 2015 Green Building Academy. All rights reserved. 88
Intent
• Conserve resources associated with the construction and management of buildings by designing for flexibility and ease of future adaptation and for the service life of components and assemblies.
© 2015 Green Building Academy. All rights reserved. 89
Requirements• Increase building flexibility and ease of adaptive use
over the life of the structure by employing at least three of the following strategies.
• Interstitial space• Program soft space• Shell space• Horizontal expansion capacity• Future parking• Demountable partitions• Movable/modular casework
© 2015 Green Building Academy. All rights reserved. 90
Interstitial Space• Design distribution zone utility systems and equipment including
HVAC, plumbing, electrical, information technology, medical gases, and life safety systems to serve the occupied zones and have the capacity to control multiple zones in clinical spaces.
© 2015 Green Building Academy. All rights reserved. 91
Programmed soft spaces• Provide programmed soft space, such as administration or storage,
equal to at least 5% of departmental gross area (DGA). Locate soft space adjacent to clinical departments that anticipate growth. Determine a strategy for future accommodation of displaced soft space.
© 2015 Green Building Academy. All rights reserved. 92
Shell Spaces• Provide shell space equal to at least 5% of DGA. Locate it such that
it can be occupied without displacing occupied space.• Shell space is an area designed to be fitted out for future expansion.
It is enclosed by the building envelope but otherwise left unfinished; it may not be climate controlled or illuminated, but adding these utilities would not disrupt hospital functions.
© 2015 Green Building Academy. All rights reserved. 93
Horizontal expansion• Identify horizontal expansion capacity for diagnostic and treatment
or other clinical space equal to at least 30% of existing floor area (excluding inpatient units) without demolition of occupied space (other than at the connection point). Reconfiguration of additional existing occupied space that has been constructed with demountable partition systems is permitted.
© 2015 Green Building Academy. All rights reserved. 94
Vertical Expansion• Design for future vertical expansion on at least 75% of the roof,
ensuring that existing operations and service systems can continue at or near capacity during the expansion.
© 2015 Green Building Academy. All rights reserved. 95
Future above grade parking• Designate space for future above-grade parking structures equal to
50% of existing on-grade parking capacity, with direct access to the main hospital lobby or circulation. Vertical transportation pathways that lead directly to the main hospital lobby or circulation are acceptable.
© 2015 Green Building Academy. All rights reserved. 96
Demountable Partitions• Use demountable partitions for 50% of applicable areas.• Demountable partition is a temporary interior wall that can be
easily reconfigured. In a health care facility, acoustical concerns and embedded equipment, as in a surgery suite, may prevent demountable partitions from being used
© 2015 Green Building Academy. All rights reserved. 97
Modular casework• Use movable or modular casework for at least 50% of casework and
custom millwork. Base the calculation on the combined value of casework and millwork, as determined by the cost estimator or contractor.
• Modular and movable casework shelving and cabinetry designed to be easily installed, moved, or reconfigured.
© 2015 Green Building Academy. All rights reserved. 98
Documentation
Documentation All Projects
Description of overall flexible design strategy Calculations for departmental gross area showing areas required for Floor plans or other documentation for areas using flexible design strategies Calculations of floor area for soft space, shell space, expansion capacity, and future parking (if applicable) Calculations of linear area for demountable partitions and description of excluded areas (if applicable) Calculation of product costs for movable and modular casework (if applicable)
© 2015 Green Building Academy. All rights reserved. 99
Questions?Ask your questions in the forum sections