1½ – 12 FITTINGS AND JOINT RESTRAINTS FOR IPS PVC …d2uxu6asgmgsc6.cloudfront.net/wp-content/uploads/2014/09/Harco... · – 12" fittings and joint restraints for ips pvc pipe

PRICE LIST ID0212EFFECTIVE FEBRUARY 6, 2012

PAGE 1 OF 24

PRICE LIST

HARCO DEEP BELL DUCTILE IRON FITTINGS

1½" – 12" FITTINGS AND JOINT RESTRAINTS FOR IPS PVC PIPE14" – 18" FITTINGS AND JOINT RESTRAINTS FOR DIPS PVC PIPE

2" – 4" LATERAL ISOLATION VALVES

IRRIGATIONPRICE LIST ID0212

See www.harcofittings.com for latest additions

FREIGHT TERMS – F.O.B. Lynchburg, Virginia

ALL FITTINGS MEET OR EXCEED:

Materials . . . . . . . . . ASTM A-536Joints . . ASTM D-3139, AWWA C-111Gaskets . . . . . . . . . . ASTM F-477Coating . . . . . . . . . AWWA C-153

ENGINEERED FOR DURABILITY

Applicable U.S. Patents: #5,183,298; #5,464,247; #7,055,865; #7,255,124; #7,552,949HARRINGTON CORPORATION • P.O. BOX 10335 • LYNCHBURG, VIRGINIA 24506-0035

PHONE: 434-845-7094 • FAX: 434-845-8562 • E-MAIL: [email protected] • WEB: www.harcofittings.com

For the most up-to-date version of this price list,visit our website at http://www.harcofittings.com


PAGE 2 OF 24

IRRIGATION PRICE LISTHARCO DUCTILE IRON PRODUCTS

Contents DISCOUNTDuctile Iron Fittings CATEGORY

Repair Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ABends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 AOne-Piece Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ABell x Spigot Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AAssembled Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6 ABell x Bell Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ACrosses and Tapped Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ATapped Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 AACME Service Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ASide Outlet Tapped Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 APlugs and Tapped Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ACaps and Tapped Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 AFlange Adapters, Tees, and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 AReplacement Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ALinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ARetainer Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ACrossover Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 AMale Adapters and ACME Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 APolyethylene Encasement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 A

Ductile Iron SaddlesSaddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 B

Lateral Connection SystemSwivel Tees and Saddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CSwivel Lateral 90°s and Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 CSwivel Lateral Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 CLateral Connection Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 CMisc. Adapters and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 CDuctile Iron Swing Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CSpecial 1½” Swivel Tees, Kits, and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . 16 CLateral 90°s, Threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 C

Joint RestraintKnuckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DFitting to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DQuick Coupler Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DPipe to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DMechanical Joint Bell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DFitting to Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 DFitting to Valve to Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 DValve to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 DHDPE Stiffener. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 DRestraint Rods and Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 DJoint Restraint Technical Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 D

Ductile Iron Threaded FittingsThreaded Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ENipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 EUnions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 E

Ductile Iron ValvesValves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 FParts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 F

NOTES1. All 14", 16", and 18" bells are for Ductile Iron Pipe Size (DIPS) PVC Pipe made to AWWA C905 and ductile iron pipe.2. GASKETS — Included in prices unless otherwise noted.3. CONNECTION LINKS — Are included in the price and shipped automatically with each SEB reducer, solid and tapped plug, and spigot x flange adapter.4. CEMENT LINING — Per AWWA C153. Available upon request. Add 5% to list prices, please specify on purchase order and allow up to two

weeks for shipment. Cement lined fittings are non-cancellable, non-returnable, and non-refundable.5. FUSION BOND EPOXY EXTERIOR COATING — Per AWWA C116. Available upon request. Add 15% to list prices, please specify on purchase

order and allow up to three weeks for shipment. Non-cancellable. Returnable value subject to restock and coating charge.6. FUSION BOND EPOXY INTERIOR COATING — Per AWWA C116. Available upon request. Add 15% to list prices, please specify on purchase

order and allow up to three weeks for shipment. Non-cancellable. Returnable value subject to restock and coating charge.7. OTHER COATINGS available upon request, COAL TAR EPOXY, PROTECTO 401, and others. Call for pricing and lead times. Non-cancellable.

Returnable value subject to restock and coating charge.8. ADDITIONAL ITEMS — Many additional configurations are possible by assembling standard fittings. Please inquire if fittings required are not in this list.9. SUITABILITY — The presence of corrosive soils or carried water may require the use of protective measures such as polyethylene encasement

and/or coatings.

HARRINGTON CORPORATION • P.O. BOX 10335 • LYNCHBURG, VIRGINIA 24506-0035PHONE: 434-845-7094 • FAX: 434-845-8562 • E-MAIL: [email protected] • WEB: www.harcofittings.com




PAGE 3 OF 24

$122.00

$833.00$971.00

$126.00$144.00$240.00$361.00

IRRIGATION PRICE LISTHARCO DEEP BELL DUCTILE IRON FITTINGS

SIZE WTLIST

PRICE

REPAIR COUPLING(Knock-On)

Dis

coun

t Cat

egor

y A

$82.00

1½2

2½3

PARTNUMBER WT

12

683

80224

$68.0010

$39.00

5

801408024080340

$40.0080040

$41.0067

6

80440

8

172333

805408064080840

4

101214

5771

81440MJ

8104081240

19316

$2,014.00270MJ suffix in part number indicates Mechanical Joint, price includes accessories

232

$750.00

18 81840MJ

$90.00

56

$1,123.00

81824

11¼° BEND(1/32 Bend)

80626

WT46

18 **

SIZE

81026

32

81624

80826

80824

81224

80426 10

PARTNUMBER

14

4 80424

8

1281424

81024

269

$107.00

$1,307.00

$447.0056

290

$162.00

LISTPRICE

$60.0080324

6$90.00

80624 21 $124.00

2½

12

81822 209 $2,599.00

$58.00

$230.00


271

81226180

180

6

75

37

$494.00

$60.00

16 81620 $2,001.00

SIZE

18 **

9

81420 23014

81622

5 $57.00

80622 23

$73.00

$147.0013

$58.00

18 **

81022

* Assembled from subcomponents.

$344.00

266 $914.00

2½

8

12

3

64

80620

10 81020102

80820

1277

16

1½ *2

8122281422

80822

14

10

80322

80022

4

$501.00

45° BEND(1/8 Bend)

81220

$3,273.0048281820

8

280020 480120 7

1½

PARTNUMBER

10

14

90° BEND(1/4 Bend)

SIZE 12WTLIST

PRICE$32.00

7

$195.00

LISTPRICE

$98.00

18 **$63.00

309

7WT

80420

8022080320

2½

80422

PARTNUMBER

8012280222

3

6

10

42 $251.0027

$479.00

$84.0015

22½° BEND(1/16 Bend)

SIZEPART

NUMBER

$422.0077

$222.0010

$893.00

35

$571.00

81826

LISTPRICE

$74.007

290

$2,451.00

21$222.00

180

The HARCO Ductile Iron Fitting product line of easily connected modular components is covered by US Patent #5,183,298.

Products in this price list are mostly import. Call for domestic products, which are available for a limited set of configurations.

1½" - 12": Bells and spigots are IPS size14" - 18": Bells and spigots are Ductile Iron Pipe Size (DIPS) for AWWA C905 PVC Pipe or Ductile Iron Pipe

8

16 $1,168.008142681626

77$893.00

** 18" Push-On bells are not joint restrainable. Concrete thrust block only. If joint restraint is required, ask for MJ fitting.

Call for other MJ sizes and configurations.

16

51 $416.00

$2,599.00

81640MJ



PAGE 4 OF 24

IRRIGATION PRICE LIST

One Piece Tees are one piece castings. At times, some of these may be supplied as Assembled Tees due to inventory status.** 18 x 16 One Piece Tee is not joint restrainable. Concrete thrust block only. If joint restraint required, ask for MJ fitting.

$66.00

16

$118.00

$148.00

$139.00$134.00

$116.00

$102.00

$139.00

$113.00$104.00

$801.00$801.00$547.00$401.00

175

$235.00$235.00

$739.00

$235.00$344.00$232.00$232.00

L.E.B. REDUCERLarge End Bell (Bell x Spigot)

$153.00

$144.00

4

4 x 4 x 2

4 x 4 x 3

3 x 3 x 2

3

4 x 4 x 2½

$86.00$53.00

7

14

9

19

$60.00$64.00

$53.00

$64.00

S.E.B. REDUCERSmall End Bell (Spigot x Bell)U.S. Patent #5,183,298

SIZEPART

NUMBER$85.0080130

LISTPRICE

9WT

8010102

2½ x 2½ x 2 80202018020202

2½ x 2½ x 3 8020203

$537.00


$725.00

$283.00$713.00

16 x 4

81432

81630

16 x 6

81832MJ

10 $179.00

$60.00

$1,895.00

802322½ x 1½ 1162½ x 2 80230

$552.00

$1,317.00

12 x 12 x 8

435362

$593.00

$1,622.00$3,950.00

8040404

8 x 8 x 3

6 x 6 x 46 8060606

10

18 x 16 * 81830MJ$1,738.0018 x 14 *

170

8040402

80606018060602

6 x 6 x 3

6 x 6 x 2

1½ 8000000

ONE-PIECE TEE

SIZEPART

NUMBER

80303038040401 16

8040403 18

8181816

25

518 x 8 x 6

$628.008

6 x 6 x 2½

12 x 12 x 6

16

8 x 8 x 48080806

8060604

8080808

8080804

10 x 10 x 4

10 x 10 x 8109

708101006 798101004

89

12

816161614 8141414

SIZE4 x 3 80431

WT

$521.00

$4,155.0018

14 x 10$515.00

Links sold separately.

100

8080803 39 $247.0044

8060603

8101008

8121208

10 x 10 x 6

PARTNUMBER

8181818MJ18 x 18 x 16 **

$194.00

8030302

8101010

8121212112

37

28

61

31

2½ x 2½ x 4

3 x 3 x 2½

3 x 2 x 2

2½

3 x 2½ x 2½

10

12

8121206

138020204

8010101

8010103$169.00

4012


LISTPRICE

Two (2) links and two (2) wedges for each spigot side only of S.E.B. Reducer are included in price and shipped automatically. In case of 14" and 16", six (6) restraint rods supplied. Some S.E.B.s assembled from Tapped Plug and Male Adapter.* 18" S.E.B.s do not "lock" into bells for 18" tees or bends. 18" Reducers must be independently thrust blocked with concrete.$66.00

17

$269.00

80302028030101

$66.00

803328

2 x 1½

3 x 2½Dis

coun

t Cat

egor

y A

2 x 2 x 3

22 x 2 x 2½

89

8 x 2½

26

21

6 x 5

$151.00

$118.0014

$189.00$194.00

$147.00

81230

81234

$232.00

12 x 6

12 x 10

$247.00

$355.00

10 x 812 x 4

42

$352.00

10

57

6 x 4

10 x 4 8103481032

10 x 3

81232

25

10 x 6

31

80632

268062880838

27

81036

16

21

8030301

8043480432 9

20

4 x 3

$147.00

$204.00$142.00

$195.00

12

11 6 x 2½6 x 3

$139.00

WTLIST

PRICE$45.00

9

335

147

10

286


808348 x 480836

8 x 6

8 x 3

80832

80634

80430

3 x 280330

8063880636

6 x 2

4 x 24 x 2½

$95.00

6

12 x 8

81635 179195

69

$900.0014 x 12 81430

135

16681637

$358.00

16 x 3

159

148

14 x 3

14 x 6

81436 137

81834MJ

55

14 x 2½ 81437

81433 151

$954.00$967.00

14 x 4

14 x 8

98

81636

81435 163

67

$134.00

81434

81632

18 x 12 *

81633 192

150

528123681030 43

$1,721.00

130126

$753.00

$1,009.00$1,022.00

16 x 1216 x 14

$1,044.0016 x 8 81634 183

$637.00

16 x 10



PAGE 5 OF 24


$379.00

$301.00

$615.00

$486.00

$301.004343

Dis

coun

t Cat

egor

y A

$1,220.00

$505.002 x 2 x 6

$197.00

LISTPRICE

PARTNUMBER

ASSEMBLED TEE(Continued)

SIZE WTPART

NUMBERLIST

PRICE

2 x 2 x 447 $346.0044

2 x 2 x 1½$147.00

2½ x 1½ x 2½ 8020002

2½ x 1½ x 1½2½ x 1½ x 2 8020001

802000080101068010104

8060304

8060302

$269.00

6 x 3 x 2½

377821

$99.00

6 x 4 x 2

6 x 3 x 4121420

8010100$309.0080603036 x 3 x 3

42 $309.00

$221.00

27 $225.0026 $222.00

6 x 2½ x 4

8040101

4 x 2 x 4 8040104

8060204

4 x 2 x 6

8040203

8040102

8040306

6 x 2 x 6

802010080201012½ x 2 x 2

SIZE

8030204

80303064 x 2 x 23 x 3 x 6

3 x 2½ x 1½

3 x 3 x 4

3 x 2½ x 23 x 2½ x 3

3 x 3 x 1½3 x 2½ x 4

$469.00

$206.00

$209.00

66

31

$479.00

$469.00

$209.00

$206.00

$238.00

14

$152.00

418030104

$452.00$99.00

21

80

41

21

$168.00$197.00

$157.00

8030201

17

80301028020206

$214.00

$273.00

$273.008 x 4 x 10$146.00

19

19

6 x 4 x 3

6 x 6 x 1½$189.001119

6 x 4 x 817

6 x 6 x 8

$615.00

86

6 x 2½ x 6

3 x 2 x 3 8030103

8030300

4 x 4 x 1½

3 x 2 x 4

4 x 2 x 2½

8030203

8030304

72

26

31

25

8040103

8040106

42

25

8060208

$800.00157

27

8040304

74

32

8040206

268040302

8060106

4 x 2½ x 2½

4 x 2½ x 6

4 x 2½ x 38040202

8040204

4 x 3 x 2

8040303

4 x 4 x 6

8040301

3 x 2 x 2½

111

52

806020653

8060203 49

58

59

6 x 2½ x 3

2½ x 2½ x 1½2½ x 2 x 3

$460.00

$209.004 x 3 x 3

4 x 3 x 64 x 3 x 4

4 x 2 x 3

4 x 2½ x 4

80201022½ x 2 x 2½

8020200

2½ x 2 x 1½

$361.00

$178.00

8030200

21

2½ x 2½ x 6

2 x 1½ x 1½2 x 1½ x 2

$608.00$361.00

8100408

$361.00

$308.00$346.00

$600.00

$160.00

8100612

8060301 $292.0041Assembled Tees assembled using One Piece Tees and S.E.B. reducers. Call for other configurations.

$362.006 x 3 x 8 8060308 88 $623.006 x 3 x 6 8060306 53

64

8040406 708040400 16

4 x 2½ x 2

$301.00

5448 $344.00

$355.00

45

$1,057.006 x 6 x 10

8020103

264 x 3 x 2½

8060401

8060408$116.00

$201.00

80604046 x 4 x 48060406

$471.00

6 x 4 x 2½16


80100018010000

8060402

8060608

88

ASSEMBLED TEE

$491.008 x 2½ x 88080206 78 $491.008 x 2½ x 68080208 86

$492.008 x 3 x 88080306 79 $492.008 x 3 x 68080308 87

$486.008 x 4 x 88 x 4 x 6

8080404 67 $486.008 x 4 x 4

828080408

$486.008 x 6 x 4

$412.008 x 6 x 28080602 61 $414.008 x 6 x 2½8080601 60

$486.008 x 6 x 88080606 76 $486.008 x 6 x 68080608 84

$1,363.008 x 6 x 128080610 203 $1,057.008 x 6 x 10

264

$265.008 x 8 x 2½8080801 36 $261.008 x 8 x 28080612

$1,057.008 x 8 x 108080812 265 $1,363.008 x 8 x 12

2058080810

$684.0010 x 3 x 88100310 146 $701.0010 x 3 x 108100308 127

$1,520.0010 x 3 x 128100406 143 $942.0010 x 4 x 68100312 258

$1,520.0010 x 4 x 12

153 $959.0010 x 4 x 88100410 172 $972.0010 x 4 x 108100412

$774.0010 x 6 x 68100604 119 $883.0010 x 6 x 48100606 1278100608 137 $791.0010 x 6 x 8

10 x 8 x 3 8100803 120

$800.0010 x 6 x 10 1568100610$1,406.0010 x 6 x 12

8100806

$694.00

138

8060403

6 x 4 x 6

$206.00

$209.00

8 x 6 x 3

260

$196.00

$792.00

$203.00

$785.0010 x 8 x 68100804 120 $883.0010 x 8 x 4

8080603

6 x 2 x 8

6 x 2½ x 8

8060108

1166 x 3 x 2

6 x 2 x 480404088060104

4 x 4 x 8

27

8040201

21

8060600

808060464

888060610 164

$205.00

36

285

8100808

18

69

8080410 217

8080406 74

10 x 8 x 10 8100810

$206.00

$209.00

$608.00


8080802

12710 x 8 x 8

16

$273.00

WT



PAGE 6 OF 24


TAPPED CROSS(Female NPT Outlet)

SIZEPART

NUMBER WTLIST

PRICE

Any combination of outlets available; 1½", 2", 2½", and 3".808510606 43 $267.00

8 x 2½ 808510505 43 $267.008 x 3

8 x 2 808510404 43 $267.006 x 3 806510606 30 $182.00

31 $182.006 x 2½ 806510505 31 $182.00

4 x 3 804510606 17 $160.004 x 2½ 804510505 17 $160.004 x 2 804510404 18 $160.00

$147.003 x 2½ 803510505 14 $147.00

802510404 103 x 2 803510404 14

102½ x 1½ 802510303 10

$139.00

$138.00$91.00

$113.00$121.00

$157.00

6 x 3 80634BB 386 x 4

$273.00$264.00

$139.00

WTLIST

PRICE

$476.00

81234BB 130 $569.0081030BB 107 $476.0081032BB

81232BB 134 $569.00

16 x 14 81630BB 343 $1,161.00

$884.0012 x 10 81230BB 143 $623.0014 x 12 81430BB 250

12 x 8 x 12

12 x 10 x 10

274

HARCO DEEP BELL DUCTILE IRON FITTINGSD

isco

unt C

ateg

ory

A

10 x 10 x 12

13

80332BB

REDUCER(Bell x Bell)

2 x 1½

ASSEMBLED TEE(Continued)

LISTPRICESIZE WT

PARTNUMBER

12 x 4 x 12

286

8100812

12 x 4 x 8

708101001

10 x 10 x 3

10 x 10 x 2

80

220

12 x 8 x 312 x 8 x 4

12 x 6 x 6

12 x 6 x 1012 x 6 x 8

16 x 12 81632BB 314 $1,085.00

12 x 8

19

21

80430BB22

1617

12 x 10 x 6

12 x 10 x 312 x 10 x 4

12 x 12 x 2½

12 x 10 x 1212 x 12 x 2

12 x 10 x 8

80432BB

80230BB

4 x 4 x 2 x 2

12 x 12 x 10

$337.00

804150404 26

802150404

8121210

$227.00

8121202

173

8121201

8121003

242

8120812

8121008169

8121012

202

44

8063080838BB

80834BB80836BB

80636BB

$447.0017

183

81010038101012

$1,520.0080330BB3 x 2½

12 x 4 x 10

$447.00$447.008101002

$1,406.00

12 x 8 x 6

192

162

26827612 x 8 x 10

12 x 8 x 8 8120808

8120804 185

204

8120806

1938120612

12 x 12 x 4

12 x 6 x 12

8120408

12 x 12 x 381212048121203

21718 x 14 * 81832BB

2½ x 1¼ 802510252

2½ x 2

18 x 16 * 81830BB 202 $2,297.00

$284.00

$142.00

60$116.00

$256.00$232.00$232.00

2343

40

8120608

8120410

8120606

$1,455.00

288

157170

812041280638BB

$1,234.00

8 x 2½

12 x 6

10 x 610 x 8

$1,413.00

$582.00

$822.00

$1,129.00

$136.0080232BB

10 x 10 x 2½ 2½ x 2

80130BB10 x 8 x 12SIZE

PARTNUMBER

90

51

$1,129.00

$1,178.00

$501.00$501.00

$1,455.00

$792.00

$1,413.00213

79

214

$220.00

$165.0017

LISTPRICE

$153.00

$503.00$624.00116

$900.00

3 x 2

$737.00$737.00

$822.00


$258.00806150606

808150606 57$334.00$330.00

6 x 2 80651040440

$260.00

PARTNUMBER

CROSS(All Gasketed Bell)

WT

8121006

8120803

802150303 16SIZE

2½ x 2½ x 1½ x 1½2½ x 2½ x 2 x 2

8 x 8 x 3 x 3

$225.00

3 x 3 x 2 x 2

6 x 6 x 2 x 26 x 6 x 2½ x 2½

808150505808150404

803150505

$253.00

8120610

$1,520.00

$737.00

8 x 8 x 2½ x 2½

* 18" BxB Reducers not joint restrainable. Concrete thrust block only. If joint restraint required, ask for MJ fitting.

133

44

54

$205.00

28

24

$57.00$57.00$57.00

6 x 6 x 3 x 38 x 8 x 2 x 2

4 x 4 x 2½ x 2½

3 x 3 x 2½ x 2½

6 x 2½

$210.00

4 x 2½4 x 36 x 2

Any combination of outlets available; 1½", 2", 2½", and 3".

803150404

41

21

806150505

804150505804150606806150404

304 x 4 x 3 x 3

2½ x 1½

80434BB4 x 2

558 x 6 80830

10658

8 x 48 x 3 61

$2,158.0089

8120810

$822.00

8121010

8121004

277

$875.00285

$1,180.00



PAGE 7 OF 24


2 x 1¼2 x 1½2½ x 1

B

2 x 1½ ACME12 $78.00

801683

WT80168

122 x 1½ B

68015302 7

$52.00

$1,042.0016 x 2½ *

$52.00

PARTNUMBER WT

2 x 1 AAA

3 x 13 x 1¼

2½ x 1½

2½ x 1¼

816505

SIDE OUTLETTAPPED CAP(FNPT or Female ACME)

$78.00

2½ x 1½ ACME

BA

802683 6

LISTPRICE

$79.00A


SIZEPART

NUMBER

6

8085303 33

812503 85

812505$447.00$447.00

$200.008 x 1¼ B80853025 34$200.00

$79.00

STYLE

80268

8085302 34 $200.008 x 1 B19 $142.006 x 1½ B

$142.006 x 1¼ B8065302 20

$111.004 x 1½ B$142.006 x 1 B

$111.004 x 1 B$111.004 x 1¼ B80453025 14

Dis

coun

t Cat

egor

y ATAPPED TEE (Service Tee)

(Continued)

SIZEPART

NUMBER WTLIST

PRICE

16 x 3 * 816506 194194194

8015303 6

16 x 2 * 816504

ACME SERVICE TEE(Female ACME)

$1,042.00

SIZELIST

PRICESTYLE

20

80353025 B11

$447.00

$807.00

$429.00

$501.00$807.00

8 x 1½

$387.00

$197.00

$52.00$47.00

8025302 A $52.00780253025 7 A

A2½ x 1½

3 x 1½ B8035303 11

8025303 78035302

$1,042.00

80153025

8065303

* Assembled from subcomponents.10" through 16" Tapped Tees are assembled from Swivel Tee and Swivel x Thread Adapter.Some items shipped using Ductile Iron Thread Bushing to accomplish smaller thread sizes.

8045302 14

8045303 13

80653025

$47.00

12 x 1¼ * 8125025 84 $447.00

$98.00$98.00

12 x 3 * 812506 84 $447.00

$98.00B11

12 x 2 * 812504 84

21

6

8

$48.00

SIZE

1½ x 1½ * 8005038 $58.00

2 x 1

WT800502

PARTNUMBER

$46.00

801502 7

801503

8025038025025

$46.00

$46.00801504

8015025


$95.00

84

84

$807.00

802502

2 x 1½

2½ x 1¼

2 x 1¼

2 x 2 *

TAPPED TEE (Service Tee)(Female NPT Outlet)

$58.00

LISTPRICE

3 x 3 *

66

12 x 2½ *

12 x 4 812508

158814505 158

8 x 1

8 x 1½

13

804502 14

810506

158

14 x 3 * 81450614 x 2½ *14 x 2 * 814504

11803503803504

804504804503

84

808502 32 $197.00

810505

8105025 66

12 x 1 *

12 x 1½ *

3 x 2½

6 x 2½6 x 3

1½ x 1 *

6 x 1¼6 x 1½6 x 2

2½ x 1½

3 x 1½

6 x 1

4 x 2

4 x 1¼

4 x 2½4 x 3

2½ x 2

4 x 1½

4 x 1

10 x 4

8 x 1¼

10 x 1¼ *

10 x 2 *

10 x 1 *

8 x 2½8 x 3

8 x 2

10 x 3 *10 x 2½ *

812502

$109.00

$393.00

$105.00

$138.00

$393.00

810508 66 $429.00

$95.009

$105.00

$48.00

7

30

6

2½ x 1

806506

$105.00

804506 16806502

806504 16 $138.00

$109.00

$130.00

804505 16

$109.00

13

20

7$48.00$48.00

803505 11

7

8045025 14

3 x 1¼

802504 92½ x 2½ *

3 x 1

3 x 2

803506

$93.00$93.00

$119.00

8035025

802505 15803502 10 $95.00

10

$197.00

3231

$138.00$138.00

151616

32 $197.00

810502808506808505

808503808504

806505

8065038065025

8085025

66 $393.00

10 x 1½ * 810503810504 66 $393.00

66 $372.00

$197.00

$105.00

31

67

22 $138.00

$197.00

$138.00

30


1½ - 8" 10 - 16"

Style A Style B

Style A Style B

1½ - 8" 10 - 16"



PAGE 8 OF 24


51 $535.00

51 $134.0012 x 4 8125608 51 $214.00

10 x 4 8105608 51 $196.00

12 x 3 8125606

Two (2) links and two (2) wedges for each Tapped Plug are included in price and shipped automatically.

MJ suffix in part number indicates MJ bell; price includes accessories.

10 x 4 8106708 51 $394.00

12 x 4 8126708

PLUG(Solid x Spigot)

SIZE

TAPPED CAP(Bell x Female NPT)LIST

PRICE

CAP

LISTPRICE

PARTNUMBER

12 x 3 8126706 51 $455.0012 x 2½ 8126705 51 $455.0012 x 2 8126704 51 $455.00

12 x 1½ 8126703 51 $455.00

10 x 3 8106706 36 $314.0010 x 2½ 8106705 36 $314.0010 x 2 8106704 36 $314.00

10 x 1½ 8106703 37 $314.008 x 3 8086706 19 $209.00

8 x 2½ 8086705 20 $209.008 x 2 8086704 20 $209.00

8 x 1½ 8086703 20 $209.006 x 3 8066706 16 $170.00

6 x 2½ 8066705 16 $170.006 x 2 8066704 16 $170.00

6 x 1½ 8066703 16 $170.004 x 3 8046706 12 $127.00

4 x 2½ 8046705 12 $127.004 x 2 8046704 12 $127.00

4 x 1½ 8046703 12 $127.003 x 2½ 8036705 6 $109.003 x 2 8036704 6 $109.00

3 x 1½ 8036703 6 $109.003 x 1 8036702 6 $109.00

2½ x 2 8026704 6 $79.002½ x 1½ 8026703 6 $79.002½ x 1 8026702 6 $79.002 x 1½ 8016703 5 $78.00

80866 55 $209.00

$78.002 x 1 8016702 5WT

LISTPRICE

81466MJ

$127.0080666 40 $170.0080466 25

66 $1,437.00

81066 97 $314.00BBA

81666 92 $1,793.00

BBBB

81266 127 $453.00

12 x 2½ 8125605 51 $120.0012 x 2 8125604 51 $134.00

12 x 1½ 8125603 51 $120.00

10 x 3 8105606 36 $116.00$101.00

10 x 2 8105604 36 $116.0010 x 2½ 8105605 36

10 x 1½ 8105603 37 $101.008 x 3 8085606 19 $91.00

8 x 2½ 8085605 20 $84.008 x 2 8085604 20 $91.00

8 x 1½ 8085603 20 $84.006 x 3 8065606 16 $69.00

6 x 2½ 8065605 16 $58.006 x 2 8065604 16 $69.00

6 x 1½ 8065603 16 $58.004 x 3 8045606 12 $66.00

4 x 2½ 8045605 12 $56.004 x 2 8045604 12 $66.00

4 x 1½ 8045603 12 $56.00

6 $58.003 x 2½ 8035605 6 $61.003 x 2 8035604

6 $47.003 x 1½ 8035603 6 $58.003 x 1 8035602

$56.002½ x 2 8025604 6 $56.00

2½ x 1½ 8025603 6

16 81655Two (2) links and two (2) wedges for each Plug are included in price and shipped automatically. In case of 16", six (6) restraint rods supplied.

$56.002½ x 1

WT

8015602 5 $55.00WT

TAPPED PLUG(Spigot x Female NPT)

2 x 1$55.00

59

6

Dis

coun

t Cat

egor

y A

2 x 1½ 8015603 5

SIZEPART

NUMBER

SIZEPART

NUMBER

$121.0010 81055 37 $102.0012 81255 51

4 80455 12 $53.00

2 80155

3 803552½ 80255 6 $43.00

6

80066SIZE


16

46

80166$41.00

$44.00

A

8025602

6 80655 $55.008 80855 20 $78.00

$596.00

5

17

8101214

ABA

17

1½2

2½ 80266

4

4

PARTNUMBER WT STYLE


LISTPRICE

$78.00

3

$78.00$78.00

$107.0080366

8

Style A Style B



PAGE 9 OF 24


$142.00PART

NUMBER

6 $34.006 $30.00MJ suffix in part number indicates MJ bell; price includes

accessories.

40

Two (2) links and two (2) wedges for each Spigot x Flange Adapter are included in price and shipped automatically.

13 $61.00

18 856181

SIZE

81860MJ 240 $1,750.0018 x 18


$785.00

Each kit contains ⅛ " red rubber full face gasket and zinc plated bolts and nuts. Call for other configurations.

$221.00

12 81260

LISTPRICE

68

3 856031

FLANGE OUTLET TEE(Bell x Bell x Flange)

LISTPRICE

81060$188.00$375.00

LISTPRICE

FLANGE ACCESSORIES(For Class 125 & 150)

WT


PARTNUMBER

14 $69.00

16 856161 26

WT

337110

3

8 80860

4 804606

10 856101

$1,266.00

12 x 6 81203F 128 $678.00

SIZE

12 x 12

WT

24081200F

SIZE

SPIGOT x FLANGEADAPTER

17 $113.0024 $163.00

$395.0094

PARTNUMBER

856081856061856041 4 $19.00

12 856121


14 856141 15 $125.00

2 $13.004

81000F 180

12 x 8 81202F 145

$902.00130 $729.00

10 x 6 81002F 111 $692.0081001F10 x 8

10 x 10

94 $535.008 x 6 80801F 76 $515.008 x 8 80800F

6 x 6 80600F 62 $401.006 x 4 80601F 49 $337.004 x 4 80400F 39 $246.003 x 3 80300F 27 $206.00

A81660 118 $1,034.0016 x 16 A81460 115 $965.0014 x 14 A

81260FB 76 $689.0012 x 12 A81260-10 145 $971.0012 x 10 B81060-12 216 $976.0010 x 12 B81060FB 56 $563.0010 x 10 A81060-08 99 $798.0010 x 8 B

$305.008 x 8 A80860-10 141 $665.008 x 10 B

6 x 8 B80860FB 67

22 $152.00

80660-08 93 $419.00

B80360-04 35 $231.0080460FB 29 $173.00

6 x 64 x 6 B

A

$267.00 Dis

coun

t Cat

egor

y A

80660FB 47 A80460-06 57 $331.00

80360FB

80660

80360 13 $95.003 x 3

LISTPRICE

FLANGE x BELLADAPTER

SIZE WT STYLEPART

NUMBER

B3 x 44 x 4

Flange bolt pattern compatible with 125 and 150 Class flanges.

Style A Style B



PAGE 10 OF 24


WTPART

NUMBER

3 x 2½3 x 3

2 x 1½

SIZE

WTSIZE

2½ x 2½ 80270 5

PARTNUMBER

6

LISTPRICE

LISTPRICE

37 x 200 823372 x 100 Tape

82330 28 $294.00

$15.0035

823PT$348.00

1Polyethylene encasement supplied in rolls in tubular form, 8 mils thick. 20" for fittings up to 8", 30" for fittings 10" to 14", and 37" for fittings 16" to 20". Complies with AWWA C105.

For installation, refer to:http://www.dipra.com/pdf/polyEncasement.pdf

LISTPRICE

20 x 400

ACME ADAPTER(Male NPT x Female ACME)

MALE ADAPTER(Bell x Male NPT)


SIZEPART

NUMBER WT

32½ x 2 80272

80470

REPLACEMENT GASKETS

SIZEPART

NUMBER

82320

LISTPRICEWT


8 $66.00

$47.00

$41.00$41.00$38.00

872-206 2

34 $375.0030 x 200

4 x 4

POLYETHYLENE ENCASEMENT(For use in corrosive soils)

$47.00

18 85518 3.2 $107.0016 85516 2.9 $87.0014 85514 2.5 $66.0012 85512 2.0 $28.0010 85510 1.3 $26.008 85508 0.7 $11.006 85506 0.4 $7.004 85504 0.2 $5.003 85103 0.1 $5.00

2½ 851025 0.1 $4.002 85102 0.1 $4.00

1½ 851015 0.1 $4.00

Dis

coun

t Cat

egor

y A

$56.0080372 5 $56.0080370

2 x 2 80170 42 x 1½ 80172 3

1½ x 1½ 80070 3

$29.002 x 1¼ 872-205 3 $29.002 x 1 872-204 3 $29.00

RETAINERCLIP

$37.006

44$37.00

SIZEPART

NUMBER82103

LISTPRICE

$21.00$7.00

3

LISTPRICE

Links included in price of and automatically shipped with S.E.B.s, flange adapters, and plugs.* Used to assemble old style lug to new style thicker lug.

14 - 16

3

WT

11 $14.00

41 $7.00

LISTPRICE

Retainer Clip $3.00

8210482106 8

Atlernative to wood wedge used when linking fittings together.

$48.00Designed to rotate "lug" axis 90°

SIZE & TYPEPART

NUMBER WT

CROSSOVER RINGLinks sold SeparatelyU.S. Patent #5,464,257

WT

82009

1½ - 8

8200782004

82000

LINKS

Fitting Size

SIZE & TYPEPART

NUMBER

10 - 12 Transition *82003

0.3

10 - 12

1½ - 8" 10 - 12"10 - 12"

Transition 14 - 16"



PAGE 11 OF 24


NOTE: Use of Mechanical Saddle on PE pipe is a compromise. Electrofusion PE saddles should be preferred.

$137.008 x 2 80890H4 12 $172.00

10 x 2 81090H412 x 2 81290H4

14 $201.0016 $228.00

PARTNUMBER

81680H4 16

SADDLEFOR DIPS, PVC & PE(Female NPT)

4 x 2 80490H4 10

16 x 2 **

WTLIST

PRICE

Dis

coun

t Cat

egor

y B

$99.00

10

$107.00

$127.007

SADDLEFOR PVC & PE(Female NPT)

4 x 23 x 2 $127.00

$127.006 x 2 80690H4 10

$280.00

SIZE

HARCO SADDLES

SADDLE(Female NPT)

12 x 2½

PARTNUMBER

810804

$90.0010 x 2½ 810805 6 $89.00

12 x 1½ * 812803 8

812805 7 $98.00

14 x 2 81490H4 15

WTLIST

PRICE

12 x 2 812804 7 $90.00

6 $81.00

7 $72.00

SIZEPART

NUMBER

14

81480H4 1512 x 2 81280H4 16

14 x 2 **

10 x 2 81080H4

80480H4

8 x 26 x 2

80880H4

2 x 1 80180H2 42½ x 1 80280H2 5

8 $81.00

80380H4

** Careful not to order these for DIPS PVC & PE Pipe. See saddles below for DIPS.SDR may not exceed SDR 35. Other outlet sizes available. Fusion Plastic Coating available (Allow 2 weeks for shipment).Bolt torque: 45-50 ft-lbs. See installation instructions.

121080680H4

$251.00$228.00

$172.00$201.00

$137.00

10 x 2

6 $79.008 x 2 808804 6 $72.00

8 x 2½10 x 1½ * 810803

8 x 1½ *

806805

808803

808805

5 $72.006 x 2½8 x 1 * 808802 7 $72.00

6 x 2 806804 5 $64.006 x 1½ * 806803 6 $64.006 x 1 * 806802 6 $64.004 x 2½ 804805 4 $68.004 x 2 804804 5 $60.00

4 x 1½ * 804803 5 $60.004 x 1 * 804802 5 $60.003 x 2½ 803805 4 $58.003 x 2 803804 4 $51.00

3 x 1½ * 803803 5 $51.003 x 1 * 803802 5 $51.00

SIZE WTLIST

PRICE* Produced using 2" NPT with 2" x 1½" or 2" x 1" Ductile Iron Bushing, installed and sealed at factory. Saddles supplied with standard powder coating.Bolt torque: 40-50 ft-lbs. See installation instructions.

$251.0016 x 2 81690H4 16 $280.00

SDR may not exceed SDR 35. Other outlet sizes available. Fusion Plastic Coating available (Allow 2 weeks for shipment).Bolt torque: 45-50 ft-lbs. See installation instructions.




PAGE 12 OF 24


NOTE: Use of Mechanical Saddle on PE pipe is a compromise. Electrofusion PE saddles should be preferred.

$349.00

14 81491H$352.0019

SADDLE(Female Swivel Outlet)

* Assembled from Service Saddle & Male Adapter** Double strap saddles with Male Adapter factory installed, for DIPS PipeBolt torque: 40-50 ft-lbs. See installation instructions.

10 81091H 18 $268.00

LISTPRICE

$115.0010

80354058045405

$349.00

SDR 35 maximum.Bolt torque: 45-50 ft-lbs. See installation instructions.

19

81081 $103.00

WT

9

7

$86.00

$64.00

78

$77.00$65.00

$190.006 80691H 14 $200.00

18

SDR 35 maximum.Bolt torque: 45-50 ft-lbs. See installation instructions.

$295.00 $295.00

$234.00

LISTPRICEWT

12 81291H

$200.00

$268.002012 81281H

10 81081H$234.00

4 3 * SIZE

PARTNUMBER

$352.001916 81681H14 81481H 19 $349.00

16 81691H

810828128212

80491H

14 ** 81492H

80382

68

804828068280882

8

$352.00

3 80381HLIST

PRICE

SADDLEFOR DIPS, PVC & PE

(Female Swivel Outlet)PIPE OD

PARTNUMBER

SADDLEFOR PVC & PE

(Female Swivel Outlet)

80681H

66 80681 7

4

12 81281

80881

8 80881H1416

6

*Assembled from Service Saddle & Male AdapterBolt torque: 40-50 ft-lbs. See installation instructions.

14

3 * 803814 80481

$190.0080481H11 $182.00

$85.00

8 $93.00$87.007

6

18 16 ** 81692H 18

SADDLE(2" Gasketed Bell Outlet)

6 $77.005 $65.00

WTLIST

PRICE

10

7

16

232½34

12

U.S. Patent #7,055,865

HARCO's standard Swivel System utilizes one unique size for the female and male swivel joint connection. All swivel male parts, regardless of functional size, fit all female swivel outlets of Swivel Tees and Swivel Saddles.

80154058025405

1681454058165405

8

SWIVEL TEE

SIZE WT2

SIZE xOUTLET

PARTNUMBER

18914 153 $852.00

$1,101.00

7912 $474.006210 8105405

8125405

635

80654058085405

Dis

coun

t Cat

egor

y C

HARCO LATERAL CONNECTION SYSTEM

PARTNUMBER

LISTPRICE

$48.00$48.0010

$64.00

$98.00$112.00$146.00$209.00$417.00

26

PIPE ODPART

NUMBER WT14

20

4

8 80891H 16

See page 23 for HARCO Swivel Valves.




PAGE 13 OF 24


* Will not be replenished when current quantities are exhausted.

2 x 18 7 8731808

87214082

$22.00

87318082 $51.00$48.0087312082

87318082P$44.00$30.00

$46.00

$29.00

87210122P

$26.00

LISTPRICE

LATERAL NIPPLE (Spigot x Male Swivel)

5 8721012 87210122

5

8 8038507

WT

$48.00$43.00

$55.00

87212082

$58.00$48.00$41.00

$41.00

PARTNUMBER

LISTPRICE

LATERAL NIPPLE (Male NPT x Male Swivel)Standard

4 87208082 x 8

4

87214088721808

$46.00

$33.006 8018506

$44.00

$35.00

$44.00

$48.00

87214082P87218082P

87212082P

87218082


$70.0080186122P801862

$49.00800862

7 8028506

$66.00

80086

8018612

$76.00 803842$70.00

$43.00

3 x 7 98 80284

80384

$40.00

1" Side Outlet Plugged

$82.00

LISTPRICE

802842P $73.00$78.00

800842P

LATERAL 90° (Spigot x Male Swivel)

LISTPRICE

87208102

87310082

8720810 $39.00

1" Side OutletPART

NUMBER

LISTPRICE

80285062P

2 x 10 4 87310082 x 12

$49.0080285062 $47.00$55.0080385072P

2½ x 6

SIZEx

RISE

3 x 102½ x 82 x 18

2 x 14 *

3 x 7

87310082P

2 x 1268

SIZEx

RISE WT

StandardLIST

PRICE

6 8721208 $38.00

PARTNUMBER

87312082P

Standard

$52.00800862P

1" Side Outlet

LISTPRICE

PARTNUMBER

802862 $56.00

801862P$52.00

802862P

$55.00$68.0080186122

$58.00

1" Side Outlet

$61.00803862P

LATERAL 90° (Female NPT x Male Swivel)

3 x 7

WT

Standard

87208082 $39.00

80185062P

PARTNUMBER

$52.00

PARTNUMBER

87208082P

$38.0080185062

PARTNUMBER

$58.00

1" Side Outlet

80385072

$60.0080184122 $76.00

801842800842

802842$79.00

2 x 6

LISTPRICE

803842P2½ x 6

SIZEx

RISE WT

Standard 1" Side OutletPART

NUMBERLIST

PRICE

$61.00

1" Side Outlet PluggedPART

NUMBERLIST

PRICE

87208102P$51.00

$32.00


8731208 $26.00

2 x 12

1½ x 6 52 x 6

$72.00

$55.00

12 8018412

80084$56.006 80184

80286

$48.00

$52.00$55.0080386

PARTNUMBER

LISTPRICE

803862

LATERAL 90° (Male NPT x Male Swivel)SIZE

xRISE WT

PARTNUMBER

LISTPRICE


NUMBERLIST

PRICEPART

NUMBERLIST

PRICE

Dis

coun

t Cat

egor

y C

SIZEx

RISE


NUMBER

2 x 12 72½ x 6 5

$64.00

$51.00

$58.00


NUMBERLIST

PRICE

$44.00

801842P $63.0080184122P

$61.00

1½ x 62 x 6


80B86

54

"Rise" is the rise in inches from "top of main" to "top of lateral line" with valve or fitting installed.

6

80186

$52.00$46.00 80B862 $49.00 80B862P1 x 6 4



PAGE 14 OF 24


SIZEx

RISE WT

U.S. Patent #7,055,865



SIZE

LISTPRICE

81282K1

2½ x 6

Alternate configurations may be supplied (Swivel Tee not included.)

$103.002 x 6 10

LISTPRICE

8018506K

PARTNUMBER

LISTPRICE

10 $96.00

4

(Valve not included.) Compatible valves: HARCO, see page 23.

12

80882K1

80482K1

$76.00

$213.00

80185062K 80185062PK8028506K8038507K 80385072K

80285062K$118.003 x 7 19

10

PUSH-ON LATERAL KIT(For G x G Lateral Isolation Valve)

68

10

7

8030485072K

8$103.00$102.00

LISTPRICE

8

3 x 4 x 7 48 803048507K

$98.00

PARTNUMBER WT

$107.009

80682K1

81082K1

$82.00

$215.00$121.00 $124.00

80285062PK80385072PK

(Swivel Tee, Valve, and Swing Joint not included.) Compatible valves: American Flow Control, AVK, Clow, Kennedy, Matco-Norca, M&H, Nibco, Waterous

8030485072PK$209.00

3 x 7

2 x 6

PARTNUMBER

Dis

coun

t Cat

egor

y C

14

24

LATERAL TEE(Bell x Male Swivel)

SIZE x RISE

PARTNUMBER

801852PK

LISTPRICE

PARTNUMBER

801852K(Swivel Tee, Valve, and Swing Joint not included.) Compatible valve: Nibco PR113

$55.00 $58.00 $61.00


$101.00

$99.00

WTLIST

PRICE

PARTNUMBER

$143.0018

80390

16 $124.00 801902½ x 6

80391

80191

3 x 7$136.00802912½ x 6

24

LISTPRICE

Standard

LATERAL 90°(Bell x Male Swivel)

$77.0016

WT

80290

SIZE x RISE

PARTNUMBER


$79.00

Standard 1" Side Outlet

2 x 6 9 80185K

2 x 6

LISTPRICE

$102.00


LISTPRICE

$87.00

WT

SWIVEL LATERAL KIT (2" Push-On Brass Gate Valve)

SWIVEL LATERAL KIT (Push-On Iron Gate Valve)

PARTNUMBER

PARTNUMBER


SIZEx

RISE

1" Side Outlet



PAGE 15 OF 24


3

875-025-12

2 MNPT

SIZEPART

NUMBER875-025-06

2½875-025-08

U.S. Patent #7,055,865



873-008 $60.00

5

SPIGOT x MALE NPT ADAPTER, COMPACT

SIZEPART

NUMBER

LISTPRICE

3 x 6

WT

8740408

2 14

8740612 5

5

1½

4

6

5$52.00

$37.002 x 8

$33.001½ x 6

Part has groove on spigot end for restraint to HARCO Bell with Knuckle Restraint. Call for other sizes and lengths. Also available in spigot x spigot. Knuckles sold separately.

$44.00

2

2 x 108740808

2 x 62 x 4

3$33.00

WT

$52.00

2

3

RISEPART

NUMBER


WT

$43.00

8740606SIZE

PARTNUMBER

ADAPTER(Female Swivel x Thread)

SIZE

11

ADAPTER(Female NPT x Male Swivel)

LISTPRICE

12

PARTNUMBER

$52.00

$47.00

LISTPRICEWT

$29.00

$62.00

2" SWING ARM KIT

2 x 2½

$39.00

SWIVEL EXTENSION(Male Swivel x Female Swivel)

87112

LISTPRICE

687106

3

SIZEPART

NUMBER WT

$32.00

874030810 3

881-0101K

$32.00

$35.00

875-025-10

WT

82008

LISTPRICE

$52.00

Dis

coun

t Cat

egor

y C

Wedge Link is rated for 1,000 pounds of load.

PARTNUMBER WT

2½ x 6

2 x 2 874030808 3

2 x 12 $48.00

$41.00

SPIGOT x MALE NPT ADAPTER

6

68741008

LISTPRICE

8740610

$32.00

$32.002 x 1¼ 874030805 32 x 1½

38740608

2 x 1 874030804 3

8741208

0.8

Part has groove on spigot end for restraint to HARCO bell with Knuckle Restraint. Knuckles sold separately.

47 WEDGE LINK

SIZEN/A $5.00

874030806


LISTPRICE

X-SECT.IN USE

X-SECT.IN USE

RISE

Spigot xThread Adapter



PAGE 16 OF 24


876-008

2½ x 1½ 8025403

SWIVEL TEE(W/ 1½" Female Swivel)

8045403

PARTNUMBERDESCRIPTION

31½ Female Swivel x 1½ Male NPT Adapter1½ Female Swivel x 2 Male NPT Adapter 2

12$105.0012

3 x 1½ 8035403

SPECIALKITS

SIZE WTPART

NUMBER

1½" FEMALE SWIVEL ADAPTERS

$65.00

2 x 1½

879-15-15 21

881-15-15 15 $130.00

$130.00

$144.00$104.00

$118.00

$103.00

881-15-10 14

879-15-10

878-10-08

1½ Gasket Knuckle / Swing Joint Assembly

LISTPRICE

875-015 11 $135.00

WT

873-006

80090DK

80190DK 13 $96.00

5 $73.00

$105.00

4 x 1½

8 x 1½ 47 $217.00

$57.00WT

PARTNUMBERDESCRIPTION

2" Lateral 90° Kit,MSWL x Gasket

$467.00

8015403

LISTPRICE

1½ Lateral 90° Kit,MSWL x Gasket

$112.00

6 x 1½ 23 $157.008065403

14

73 $413.008105403

16 $126.00

10 x 1½8085403

812540312 x 1½ 91For use with 80090DK and 881-XX-YY Ductile Iron Swing Joints.

LISTPRICE

1½ Restrained Gasket x 1½ Male NPT

1½ Male NPT x 1 Male NPT

1 Female NPT x 1 Male NPT

1½ Restrained Gasket x 1 Male NPT2 Male NPT x 1 Male NPT

21877-20-10 17

878-10-10

$103.00

18 $109.0017

877-15-10

DUCTILE IRON SWING JOINT

1½ Female NPT x 1 Male NPT

1 Female NPT x ¾ Male NPT

1½ Male Swivel x 1½ Male NPT1½ Male Swivel x 1 Male NPT

878-15-1019 $122.00

HARCO LATERAL CONNECTION SYSTEMU.S. Patent #7,055,865



PARTNUMBER

Dis

coun

t Cat

egor

y C

LISTPRICESIZE, INLET x OUTLET


Quick Coupler Valve and pipe not included. Quick Coupler Anchor purchased separately may be used instead of locking sleeve.Call for other inlets and outlets.Knuckle bolt torque: 35 ft-lbs.

Part number 80090DK: For use with Swivel Tees with 1½" Female Swivel, part number series 8xx5403.Part number 80190DK: For use with standard Swivel Tees, part number series 8xx5405.Knuckle bolt torque: 35 ft-lbs.

HARCO SPECIAL 1½" LATERAL CONNECTION SYSTEM

19WT

875-01580090DK 80190DK

MNPT

FNPT

RestrainedGasket

Inlet Types

Locking sleeve for 1" only

MaleSwivel



PAGE 17 OF 24


2 Male NPT x Male NPT

$96.00

SIZE

1½

3 80387

$79.00

2 9

$84.00801873

WT

11

72 Female NPT x Male NPT

11

9

801873P

PARTNUMBER

PARTNUMBER

80087

$106.00802883P

Standard

8028832½ Female NPT x Male NPT

3 Male NPT x Male NPT 11


803883

7

LISTPRICE

LISTPRICE

LISTPRICE

801883 $74.00

$102.00

1" Side Outlet 1" Side Outlet Plugged

801872

$102.008028739

$111.008038733 Female NPT x Male NPT$82.00 $88.00

$114.00803873P803883P

2½ Male NPT x Male NPT

LATERAL 90° (Male NPT x Male NPT)

LISTPRICE

$69.00

1" Side Outlet

800872

$63.00

PARTNUMBER

LATERAL 90° (Female NPT x Male NPT)

$72.00

2½803872

$68.0080187 $72.00

802872$89.0080287

7

12

803882

PARTNUMBER

$79.00$74.00 803882P


NUMBER

1" Side Outlet

801872P $81.00$73.00

$87.00

$95.00$77.00

803872P

801883P

800872P $78.00

$84.00802873P

$105.00

LATERAL 90° WITH 1½" SIDE OUTLET

WT

SIZEx

RISE

802872P

LISTPRICE

$99.00

$66.0078

$66.00800882P$66.00$77.00

801882P802882P802882

801882801881½ $56.005 80088 $62.00800882

$69.009 80388

22½ 80288

WT

StandardPART

NUMBERLIST

PRICE

1" Side Outlet PluggedLIST

PRICEPART

NUMBERLIST

PRICE

Dis

coun

t Cat

egor

y C

PARTNUMBER

3

SIZEx

RISE

$57.00




PAGE 18 OF 24


8 820811


PARTNUMBER WT

Price is for one (1) set consisting of two (2) clamp halves and four (4) clamp bolts with nuts.

$887.001216

820810 156 820610 104

$145.00

A3 820310 5

821011 29 $196.00

STYLELIST

PRICE

60-100-0360-100-04

SIZEPART

NUMBER

2½

43

$26.0060-100-0160-100-02

Dis

coun

t Cat

egor

y D

A

8

60-100-25

* Will not be replenished when current quantities are exhausted. Style D, Clamshell Restraints, can be used instead.Style A: Price is for one (1) set including one (1) clamp and bolt set, and two (2) eye bolts with nuts.Style B: Price is for one (1) set including one (1) clamp and bolt set, one (1) backup ring, and four (4) restraint rods with nuts.Style C: Price is for one (1) set including one (1) clamp and bolt set and six (6) restraint rods with nuts.

Price is for one (1) set consisting of one (1) clamp and bolt set, one (1) backup ring, and two (2) T-bolts with nuts.

$246.00

1½2 3

2

PIPE TO PIPE RESTRAINT(Style A)

$29.00

QUICK COUPLER ANCHORU.S. Patent #7,255,124

SIZE

821615

Price is for one (1) joint including one (1) clamp bolt set and restraint rods with nuts as required3" - 12" for IPS pipe.14" - 18" for DIPS pipe

Price is for one (1) set consisting of two (2) clamp and bolt sets and two (2) restraint rods with nuts.

8201152

PARTNUMBER

HARCO JOINT RESTRAINT

8214151614

820415

Knuckle bolt torque: 35 ft-lbs.

SIZE

$196.0014

KNUCKLE RESTRAINTU.S. Patent #7,552,949

$150.00

2½

4

8202153

18

3

WTLIST

PRICE

3 $32.00$37.00

FITTING TO PIPE RESTRAINT(Clamshell Restraint)

6 820615

821215

8 820815

SIZEPART

NUMBER

SIZEPART

NUMBER

52 $585.0010 821015

WTLIST

PRICE11 $83.00

113

$462.0026 $246.0047

18

820611 12 $108.00

MECHANICAL JOINTBELL RESTRAINT

SIZE

8$108.00

PIPE TO PIPE RESTRAINT(Style B)

6 $71.00

$59.00

821410 50 C

A

6

WTLIST

PRICE7 $65.00

821815 187 $1,231.00

$81.00820315

133 $1,055.00

10 $122.007

PARTNUMBER WT

LISTPRICE

34820816

WTLIST

PRICE

12 $150.00$196.00

SIZEPART

NUMBER8

164

$122.00

6 820616

3

820410 8

1416 821610 55

12 * 821210

820316820416

2 820110 4 A2½ 820210 4

$54.00

B66 B

10 * 821010 51

$389.00$261.00

C

A $64.00

$196.00$145.00

A

$470.00

$83.00

10

$64.003 820335 5

FITTING TOPIPERESTRAINT

12 821211 38 $261.00

4 820435 7 $83.006 820635 9 $108.00

22 $196.008 820835 13 $145.00

10 82103512 821235 25

6518 821835

1416

USE FITTING TO PIPE RESTRAINT THIS PAGE

$500.00

$261.00

WTLIST

PRICE

4 820411

$21.001½ 2

¾ or 1 82201 2

Grip Ring bolt torque: 100 ft-lbs.Knuckle Restraint bolt torque: 35 ft-lbs.

$22.0082202

Style A Style B Style C



PAGE 19 OF 24


Valve restraints fit the following brands: American Flow Control, AVK, Clow, Kennedy, Matco-Norca, M&H, Nibco, Waterous

$162.002½ 820221820121

3 820325

820825

17820426

$156.002

4 820425

Price is for one (1) set including backup ring and two (2) eye bolts with nuts.

SIZEPART

NUMBER

FITTING TO VALVE TO PIPE RESTRAINT(Style A)

10 821021

4 8204226 8206228 820822

3 820322

12 821221

Grip Ring bolt torque: 100 ft-lbs.

6

PARTNUMBER

VALVE TOPIPE RESTRAINT(Style B)

SIZE

Price is for one (1) set including two (2) clamp and bolt sets, two (2) backup rings, and four (4) T-Bolts with Nuts.

68

Length is compatible with valves noted and HARCO valve restraints.

WT

$317.00

WTLIST

PRICE$166.00$183.00$212.00$244.00

$166.00$183.00$212.00$244.00

$383.00

SIZEPART

NUMBER3 8203214 8204216

6

60

FITTING TO VALVERESTRAINT

3 820320 5 $46.00SIZE

PARTNUMBER WT

LISTPRICE

8206254 820420 7 $59.00

$479.0012 821225

LISTPRICE

$601.005247

820125 $173.002½

10 821025

224

$80.006 820620 8 $66.008 820820 11

22

108

14

50

Price is for one (1) set including one (1) clamp and bolt set, and restraint rods with nuts.



6 820626

Dis

coun

t Cat

egor

y D

SIZEPART

NUMBER WT

$196.00

7

3

2820225 $188.007

Price is for one (1) set including two (2) clamp and bolt sets, and restraint rods with nuts as required.

$284.00$230.00

8 820826 33 $357.00

820326 13

1014

$196.00

26$284.00$357.00

18$230.00

LISTPRICE

8

6

101422

WT

Price is for one (1) set including two (2) backup rings, one (1) clamp and bolt set, two (2) eye bolts with nuts, and two (2) T-Bolts with nuts.

8206218 820821

LISTPRICE

VALVE TOPIPE RESTRAINT(Style A)

FITTING TO VALVETO PIPE RESTRAINT(Style B)

52 $8.00

$14.00

2½ 820223 1 $6.003 820323 1

$35.008 $22.00

2 820123 1 $5.00

$6.004 820423

8820623

LISTPRICE

12 821223 16 $52.0010 821023 12

PVC PIPE SPIGOTSFOR VALVE RESTRAINTS(Factory Beveled, SDR21)

SIZEPART

NUMBER WT

820823

2-8"

2-8"10-12"

10-12"



PAGE 20 OF 24


Specify whether IPS or Ductile Iron Pipe Size and SDR of pipe.Use PE Pipe Stiffeners when PE Pipe is used with Ductile Iron Fittings.

$132.00

$61.00D

2-3 Fitting to Valve to Pipe Rod 82001-1210-12 Valve to Pipe Rod

Price includes nut.

$19.00¾ x 9 T-Bolt T-BOLT-92 $32.00¾ x 11 T-Bolt T-BOLT-111

C

WT82001 A

PARTNO.DESCRIPTION

SIZEPART

NUMBER WT825-015

A $37.00

STYLELIST

PRICE


11½

$15.00 2

LISTPRICE

¾ x 3 Joint Restraint Bolt

RESTRAINTRODS &BOLTS

$17.001

$95.00825-020

82002-3

PE PIPESTIFFENER

STYLE

$102.00$118.00

1 A $37.00

2 $28.00$65.00

$49.00

643

$17.00D

$39.00

¾ x 4 Joint Restraint Bolt 82002$32.001

2D820021-17

D

B

8 Valve to Pipe Rod

⅝ x 3 Joint Restraint Bolt

4 Valve to Pipe Rod2-3 Valve to Pipe Rod

820021-23820021-20

820021-33820021-26

1A 1A

6 Valve to Pipe Rod D

$54.006 Fitting to Valve to Pipe Rod3 $47.004 Fitting to Valve to Pipe Rod B

B82002-19 482002-15

5 $63.008 Fitting to Valve to Pipe Rod B82002-2112 $81.0010 Fitting to Valve to Pipe Rod B82010C

$10.00⅝ x 5 T-Bolt C17 $97.0012 Fitting to Valve to Pipe Rod B82012C

82006 11 $14.00¾ x 6 T-Bolt 82007 C

4 B

3 825-030 2 B4 825-040 2 B

10 825-100 5 B

Dis

coun

t Cat

egor

y D

C

15 B

6 825-060 3 B

16 825-160 7

8 825-080

$263.00B

$165.0012 825-120

825-180

$150.006 B

18 $299.00

$176.0014 825-140 7 B


A B

C DStyle A Style B

Internal slide to lock stiffener



PAGE 21 OF 24


Valves: Treat as Dead End. Use Valve Restraint and restrain adjacent upstream joints listed in table. If closed valve can have pressure from either side, restrain adjacent joints both sides per table.

Bends & Caps/Dead Ends: Restrain all bells and the adjacent joints listed in table (both directions for bends).

Reducers: Restrain large bell and adjacent joints listed in table.

JOINT RESTRAINT SELECTION

14 1612RunSize

Tees - With Run Reductions: Restrain all bells and adjacent branch joints noted. Treat run reduction as a reducer. Restrain as noted adjacent joints to large

bell per reducer table.

12

2 2½ 3

10

22½

Dis

coun

t Cat

egor

y D

10

Tees - Branch bell only restrained: Usejoint restraints ONLY on branch. Number below is number of 20' joints to be restrained with pipe to pipe restraints.

Tees - Branch bell only restrained: Usejoint restraint on ALL three branches of tee. Number below is number of 20' joints to be restrained with pipe to pipe restraints in branch only direction.

Tees (Branch Size)4 6 8

Bends, Reducers, Caps, and Valves

1012 3

468

14

1416

— — — 1 1 2 3

—— 1 1— 1 1— — 1 1— — 1 1— — 1 1 1— — 1 1 116

Size2

2½

Bends

468

11¼ 22½ 45

— — —

90 1 2

3 — — — — — —

3DeadEnds

Reductions

— — — — — — — —— — — — — — — 1

1— — — — — 1 1 2

1 2 2

1

3— — — 1 1 3 3 4

1

4— — — 1 2 2 3 4— — — 1 1 2 3 4— — — 2 1 2 3 5

6 8 10 122 2½ 3 4

—

14 162 — — — 1

RunSize

Tees (Branch Size)

2½ — — —

— ——3 — — —

64 — —

— — 1 12 38 — — —

—10— 2

12 — —— —

Restraint Calculation Assumptions:Maximum pressure: 125 psiRestrained Lengths: Each restraint connects 20 ft length of pipeSoil Type: Type GM, gravel-sand-silt mixtureMinimum Burial Depths: 2"–2½", 18" cover; 3"–8", 24" cover; 10"–12", 30" cover; 14"-16", 36" coverTrench Type: 3, pipe bedded in 4 inches minimum loose soil. Backfill lightly consolidated to top of the pipe.Safety Factor: 1.5

1 21 1 2

— — 114 — —16 —

— ——

Tables below list number of adjacent pipe joints to be restrained for basic fitting configurations. These were calculated using the joint restraint calculator available at www.harcofittings.com for a set of assumptions that will envelop many applications. Check that the assumptions listed below meet or exceed your application. If your situation is not covered by the assumptions or a more refinedrestraint scheme is desired, use the restraint calculator at www.harcofittings.com.

— —1




PAGE 22 OF 24


3 *

$32.003 x Close 87030-00 2 $31.00

3 x 3 87030-03 3

88106

* Malleable iron.

1 88102 1 $7.00

SIZEPART

NUMBER WT

TEE

SIZEPART

NUMBER WT

388615 2

3 $71.002 88620

PARTNUMBER

LISTPRICE

UNIONSIZE WT

$56.001½$31.00$67.00

1½ x 1 8851510 1 $9.001¼ x 1 8851210 1

LISTPRICE

1 $11.001½ x 1¼ 8851512 1 $11.00

$11.002 x 1¼ 8852012 1 $11.00

8853020 1 $19.00

2½ x 1½ * 8852515 1 $16.00

88403

884063 *

WT

2

88215

1 $12.00

2½ 88025 3 $29.00

88015

WT

$34.00

3 *

88220 2 $21.002½ 88225 4 $46.00

$67.00

2

1½ 88315 1 $21.002 88320 2 $24.00

2½ 88325 3 $57.003 * 88330

SIZEPART

NUMBER

2½ * 8862588630

$46.00

$16.00

$9.00

87015-04

1½ x 20

$17.00

$16.00

1½ x 10

$11.001 $12.00

LISTPRICE

5 $76.00

WTLIST

PRICE

1

$127.00

2 $11.00

NIPPLE(Male NPT x Male NPT)

SIZEPART

NUMBER WTLIST

PRICE

3 * 5

88105

88230

88104 1

5

88103

1½ x Close

1½ x 8

1½ x 3

88030 3

2 x 8

2 x 12

2 x 16

LISTPRICE

88020

1

5

7

9

$9.00

87015-10 5 $27.0087015-08 4 $22.00

$9.0087015-03 2

$154.00

87015-02

1½ x 6 87015-06 3 $16.001½ x 4

4

1

$32.001½ x 14 87015-14 6 $38.001½ x 12 87015-12

$44.001½ x 18 87015-18 8 $51.00

87015-161½ x 16

$59.00

2 x 3 87020-03 2 $11.002 x Close 87020-00 1 $11.00

87015-20

2 $14.002 x 6 87020-06 3 $21.002 x 4 87020-04

5 $28.002 x 10 87020-10 6 $34.00

87020-08

7 $41.002 x 14 87020-14 8 $56.00

87020-12

9 $61.002 x 18 87020-18 10 $64.00

87020-16

12 $71.002 x 24 87020-24 14 $86.002 x 20 87020-20

21 $121.002 x 30 87020-30 18 $102.002 x 36 87020-36

3 $31.002½ x 6 87025-06 4 $36.002½ x 4 87025-04

7 $47.002½ x 8 87025-08 6 $42.00

87025-10

10 $61.0087025-12 9 $61.0087025-14

$10.00

5 $39.00$32.00

14 $81.00$74.00

11 $67.0013

16

87015-00

$69.00$69.00

87030-10 9 $56.00

87030-14

$46.00

4

$84.00$76.003 x 16

3 x 1887030-16

3 x 20 87030-20 18

LISTPRICE

3 x 8

3 x 4

2½ x 18

2½ x 14

1314

87030-18

SIZE1½

2½ x 12

87030-12

87030-08

$21.002

7

3 x 122½ *

2½ x 20

87030-04

2½ x 16

$9.003 x 6 87030-06

3 x 1021½

8853025 2

1 $17.00

3 $61.00

PARTNUMBER

188404 1

87025-20

87025-1687025-18

$19.00

2½ x 10

LISTPRICE

7

88405

WT

5

PARTNUMBER

8852520 1

8852015 1

8852010

WTLIST

PRICE

2 $16.00

90° BEND

45° BEND

PLUG

$92.00

3 x 14


11

PARTNUMBER

88115

88130

8812088125

3 *

1½

3 x 2½ *

2½ x 2 *

2

3 x 2 *

2 x 1

CAPSIZE

22½

Dis

coun

t Cat

egor

y E

2½

1½

2 x 1½

21½

3 *

1 $16.00SIZE

PARTNUMBER

$86.00

SIZE

BUSHING

COUPLING

HARCO DUCTILE IRON THREADED FITTINGS

1½ x 2

T.O.E.Nipples

available



PAGE 23 OF 24


LATERAL ISOLATION VALVE(U.S. Patents #7,055,865; #7,552,949)

* 2" and 2½" Valves with Square Operating Nuts are assembled at time of order. Allow up to three days for shipping.Knuckle bolt torque: 35 ft-lbs.

2" x 6" Gasket x Male Swivel

2" x 6" Gasket x Male Swivel,1" Side Outlet Plugged

2" x 12" Gasket x Male Swivel

8414062PN $470.00

$345.002½" x 6" Gasket x Male Swivel,1" Side Outlet Plugged

8413062PN22

15 8412062PN


$329.00

4" x 6" Gasket x Male Swivel,1" Side Outlet Plugged 29


2" Gasket x Gasket

2" Gasket x Gasket,1" Side Outlet Plugged 17

18

17

With Cross Handle

841106L

$248.0018 841112L

8412062PL

8411122PL

8411GGL

$266.008411GG2PL

$264.00

8411062PN $261.00

$254.00$238.00 841106N

$245.00

$271.00

$266.00

LISTPRICE

$392.00

8411GG2PN

$250.00

With Square Nut *PART

NUMBERLIST

PRICE

$282.00

8411122PN

$5.00

$4.00

3" Gasket 85103 $5.00

85104 0.2

0.1

851025 0.10.8 $22.00

$26.00

$30.000.9

0.9

$18.00

4" Gasket

$4.00

2½" Gasket

LISTPRICE

PARTNUMBER

5.0

DESCRIPTION

85102 0.12" Gasket

DESCRIPTIONPART

NUMBER WTLIST

PRICE STYLE

PARTS

PARTNUMBER

8411062PL

8411-04 0.82" Grip Ring Assembly

4" Grip Ring Assembly 8414-04

2½" Grip Ring Assembly 8412-04

3" Grip Ring Assembly 8413-04

Dis

coun

t Cat

egor

y G

STYLE

15

WT

8411GGN

DESCRIPTION(Size x "Rise to Lateral")

15

$255.00

841112N

HARCO VALVES

841-01 0.3 841-03$42.00LIV Bonnet Assembly,2" & 2½"

LIV Cross Handle

WT

$175.00

$18.00LIV Bonnet Assembly,

3" & 4"8413-03 9.0


N/A

N/A

LIV Square Operating Nut 841-12 1.8 $294.00

STYLE

Minimum"rise" of

13".


PAGE 24 OF 24

OTHER COMPATIBLE PIPE STANDARDSBritish Standards: BS 3505/3506 1½", 2", 3", 4", 6", 8", 10", 12"Japanese Standards: JIS K 6741 with transition gaskets, Call for Product #’s 50mm, 75, 150, 200, 250, 300

US made Push On fittings are available in many configurations. Call for price and availability.

Mechnical Joint Fittings are available. Call for price and availability.

Conditions of SaleRETURNS: All returned merchandise must have authorization from Harco. Returned merchandise will only be accepted within one (1) year of the date of invoice. Merchandise must be in new and marketable condition. Freight charges on authorized returns must be prepaid and a restocking charge will be made except for returns resulting from shipping errors on our part or material proven to be defective.

CLAIMS: All claims for damage or shortage in transit shall be handled with the carrier by the consignee.

GUARANTEE: The Harrington Corporation (Seller) guarantees to credit against invoice price or, at its option, to furnish, but not to install, replacement parts of like kind, F.O.B. its plant, Lynchburg, Virginia, any item of its manufacture proved to be defective in material or workmanship within one (1) year from date of shipment provided Buyer (or Purchaser) gives immediate written notice of such alleged defect and, if required, returns defective item to Seller’s plant freight prepaid. Items or components not of Seller’s manufacture are not included in the foregoing guarantee but are subject only to any warranty of their respective manufacturers. Seller shall not be liable for the cost of any repairs or work done or materials used by the Buyer because of defective or non-conforming items, unless authorized in writing by Seller. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY BREACH OF THIS GUARANTEE unless applicable federal or state law forbids exclusion of incidental or consequential damages.

WARRANTIES: EXCEPT FOR THE ABOVE “GUARANTEE,” SELLER MAKES NO EXPRESS WARRANTIES AND NO IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AS TO PRODUCTS SOLD BY US, UNLESS APPLICABLE FEDERAL OR STATE LAW FORBIDS SUCH DISCLAIMER OF WARRANTIES. NO WAIVER, ALTERATION, OR MODIFICATION OF THIS DISCLAIMER OF WARRANTIES SHALL BE VALID UNLESS MADE IN WRITING AND SIGNED BY AN EXECUTIVE OFFICER OF SELLER.

PRICES: Subject to change without notice. Possession of price sheets does not constitute an obligation to sell and orders may be refused without cause.

SUITABILITY: The presence of corrosive soils or carried water may require the use of protective measures such as polyethylene encasement and/or coatings.

ENGINEERED FOR DURABILITY

HARRINGTON CORPORATION— HARCO Fittings —

www.harcofittings.com

MAILING ADDRESS:P.O. Box 10335

Lynchburg, VA 24506-0335

PHYSICAL ADDRESS3721 Cohen Place

Lynchburg, VA 24501-5047

PHONE: 434-845-7094FAX: 434-845-8562

EMAIL: [email protected]

Plant inLynchburg, Virginia

Warehouses in Virginia, Florida, Texas, and Arizona


Documents

1½ – 12 FITTINGS AND JOINT RESTRAINTS FOR IPS PVC …d2uxu6asgmgsc6.cloudfront.net/wp-content/uploads/2014/09/Harco... · – 12" fittings and joint restraints for ips pvc pipe