Upload
sidy-elbechir-drame
View
217
Download
0
Embed Size (px)
Citation preview
7/27/2019 1-05 Change Coupler Polarization
1/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Security Level:
www.huawei.com
Change Coupler Polarization
7/27/2019 1-05 Change Coupler Polarization
2/12
CONTENT
Change Coupler Polarization
7/27/2019 1-05 Change Coupler Polarization
3/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3
Hybrid Coupler
Hybrid Coupler (Waveguide Interface)
Main interface
Standby interface
Vertical polarization.
Can change.
Horizontal polarization.
Cant change.
Horizontal polarization.Cant change.
Antenna interface
7/27/2019 1-05 Change Coupler Polarization
4/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
Hybrid Coupler
Hybrid Coupler (Waveguide Interface)
Interface Factory Pre-Set
Polarization Mode
Method of changing
Polarization
Hybrid
Coupler
Antenna Interface Vertical Rotating the transition.
Main interface Horizontal Cant change.
Standby interface Horizontal Cant change.
7/27/2019 1-05 Change Coupler Polarization
5/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5
Change Coupler Polarization
Antenna Interface Factory Pre-set: Vertical Polarization
The side with label, should be up.Arrow Indicator
V
H
7/27/2019 1-05 Change Coupler Polarization
6/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6
Change Coupler Polarization
Judge whether to change the polarization Only horizontal mode used in the microwave plan document, it will be necessary to
change coupler polarization mode.
Read
Plan Document
Polarization: V
Polarization: H
Only check, Not
Change Polarization
Check and ChangePolarization
Get polarization information
from Plan Document.
7/27/2019 1-05 Change Coupler Polarization
7/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 7
Change Coupler Polarization
Vertical Polarization Horizontal Polarization1. Remove M3 Screw.
2. Pull out vertical polarizer unit.
3. Install horizontal polarizer unit.
4. Re-install M3 screws.
Horizontal
polarizer unit
Vertical
polarizer unit
7/27/2019 1-05 Change Coupler Polarization
8/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8
Change Coupler Polarization
Vertical Polarization Horizontal PolarizationLoosen the screws by hex
key wrench and remove the
polarization part;
Remove the vertical
polarization converter fromthe polarization part;
1
2
7/27/2019 1-05 Change Coupler Polarization
9/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 9
Change Coupler Polarization
Vertical Polarization Horizontal Polarization
Replace the vertical polarization converter with the horizontal polarizer
and connect to the polarization part;
3
7/27/2019 1-05 Change Coupler Polarization
10/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10
Change Coupler Polarization
Vertical Polarization Horizontal PolarizationConfirm the interface of the polarization
part is the same as coupler, then insert
the polarization part into the antenna
interface of the coupler;
Confirm the arrow on the polarization
part points to "H",and fix the two screws
on the polarization part by hex key
wrench.
4
5
7/27/2019 1-05 Change Coupler Polarization
11/12
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11
Change Coupler Polarization
Vertical Polarization Horizontal Polarization
Before changing (Factory pre-set) After changing
7/27/2019 1-05 Change Coupler Polarization
12/12
Thank youwww.huawei.com