Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
0.7mm STAINLESS STEEL PIPE SYSTEM
Product group 2
A modular pipe system
Download catalogue
www.pmdvent.dk
0.7mm STAINLESS STEEL PIPE SYSTEM
Product group 2
Content Assembly methods .................................. 1-7 Pipes .................................. 8-10 Bends .................................. 11-12 Branches .................................. 13-18 Reducers & transitions ............................... 19-20 Spigots & hoods .................................. 21 Exhaust caps .................................. 22-23
Introduction The 0.7mm modular piping system from PMD is made in stainless steel with thickness ranging from 0.5mm to 0.7mm. The piping system is assembled by lock formed seams and spot welding. The components listed in this catalogue, include common parts required for pipe systems for ventilation and dust extraction. PMD can produce non-standard sizes and components according to the customers request. Modular components are assembled by either of the available assembly methods SSR, SWR, SQL or SFL. Assemblies by SQL gives an airtight assembly. Sealing options for SSR, SWR and SFL is available in forms of SE and FS, refer to page 5-6.
Assembly methods The 0.7mm Stainless steel pipe system is assembled by using either of the below assembly methods: SSR – standard ring assembly This assembly method consist of two half circular rings connected around the beading of the pipes with 2 bolts. This assembly system is recommended for pipe sizes Ø80-Ø200. If a very tight assembly is required, then seal ring SE can be mounted on one beading per assembly. SWR – wide ring assembly This assembly method consist of a circular band joined by a single bolt. The ring supports on the beadings as well as on the tube. SWR is suitable for assembly of larger pipe diameters Ø200-Ø700. Seal ring SE will give an airtight assembly. Mount the seal ring on one beading only per assembly. SFL – loose flange assembly Flanges are inserted loosely behind the beadings. The flanges give a strong assembly suitable for large diameter pipes above Ø500. SE seal ring or FS flange gasket can be used with this assembly method to ensure an airtight assembly. SQL – quick lock assembly This assembly method consist of two half circular hinged assembled by a lever lock. The rings are provided with seal to give an airtight assembly. Recommeded for pipe sizes Ø80-Ø400.
v.EN.04/2013
Page I
D kg
(10pc) Part no.
80 0.55 02010080
100 0.60 02010100
120 0.65 02010120
125 0.70 02010125
140 0.75 02010140
150 0.80 02010150
160 0.83 02010160
180 0.85 02010180
200 0.90 02010200
225 0.95 02010225
250 1.00 02010250
275 1.05 02010275
300 1.25 02010300
All dimensions in mm
STANDARD RINGS – SSR Group 2 – 0.7mm stainless steel pipe system
Standard rings - SSR are made from 0.6mm stainless steel.
Order code: SSR-D
diameter
Example: SSR-180 Standard ring for assembly of 180mm diameter stainless steel pipe modules.
Page 1 www.pmdvent.dk
D kg Part no.
200 0.18 02020200
225 0.22 02020225
250 0.26 02020250
275 0.30 02020275
300 0.34 02020300
315 0.36 02020315
350 0.37 02020350
400 0.39 02020400
450 0.45 02020450
500 0.49 02020500
550 0.52 02020550
600 0.56 02020600
All dimensions in mm
WIDE RINGS - SWR Group 2 – 0.7mm stainless steel pipe system
Wide rings - SWR are made from 0.6mm stainless steel.
Order code: SWR-D
diameter
Example: SWR-315 Wide ring for assembly of 315mm diameter stainless steel pipe modules.
Page 2 www.pmdvent.dk
.
D kg Part no.
80 0.20 02040080
100 0.21 02040100
120 0.22 02040120
125 0.22 02040125
140 0.24 02040140
150 0.25 02040150
160 0.26 02040160
180 0.27 02040180
200 0.33 02040200
225 0.35 02040225
250 0.37 02040250
275 0.40 02040275
300 0.45 02040300
Seal E/S
All dimensions in mm
QUICKLOCK RINGS - SQL Group 2 – 0.7mm stainless steel pipe system
Quick locks - SQL are made from 1mm stainless steel with seal. Available seals: EPDM (E)– Black colour (standard). Silicone (S)– Red colour.
Order code: SQL-D-E
diameter
Example: SQL-150-E Quick lock with EPDM seal for assembly of 150mm diameter stainless steel pipe modules.
Page 3 www.pmdvent.dk
Flanges - SFL are made from 3-4mm stainless steel.
Order code: SFL-D
diameter
Example: SFL-150 Flange to suit 150mm diameter stainless steel pipe modules.
FLANGES - SFL Group 2 – 0.7mm stainless steel pipe system
D DO DC t kg H N Part no.
80 133 115 3 0.35 9 8 02050080
100 153 135 3 0.43 9 8 02050100
120 173 155 3 0.50 9 8 02050120
125 178 160 3 0.52 9 8 02050125
140 193 175 3 0.57 9 8 02050140
150 203 185 3 0.61 9 8 02050150
160 213 195 3 0.65 9 8 02050160
180 233 215 3 0.72 9 8 02050180
200 253 235 3 0.80 9 12 02050200
225 278 260 3 0.89 9 12 02050225
250 303 285 3 0.98 9 12 02050250
275 328 310 3 1.07 9 12 02050275
300 367 336 3 2.01 9 12 02050300
315 382 351 3 2.11 9 12 02050315
350 417 389 3 2.33 9 12 02050350
400 467 439 4 2.64 11 16 02050400
450 499 489 4 2.11 11 16 02050450
500 549 540 4 2.33 11 16 02050500
550 617 590 4 3.59 11 16 02050550
600 683 640 4 4.91 11 16 02050600
All dimensions in mm
Page 4 www.pmdvent.dk
D kg
(10pc) Part no.
80 0.2 01030080
100 0.3 01030100
120 0.45 01030120
125 0.5 01030125
140 0.55 01030140
150 0.6 01030150
160 0.65 01030160
180 0.7 01030180
200 0.8 01030200
225 1.1 01030225
250 1.15 01030250
275 1.2 01030275
300 1.3 01030300
All dimensions in mm
SEALING RINGS – SE Group 2 – 0.7mm stainless steel pipe system
Sealing rings - SE are made from EPDM.
Order code: SE-D
diameter
Example: SE-150 Sealing rings used for sealing 150mm pipe components.
Page 5 www.pmdvent.dk
Flanges gasket - FS are made from 3mm EPDM.
Order code: FS-D
diameter
Example: FS-300 Flange gasket for 300mm diameter flanges.
FLANGE GASKETS – FS Group 2 – 0.7mm stainless steel pipe system
D Part no. Dim
80 01060080
Dim
ensi
on
s as
per
fla
nge
100 01060100
120 01060120
125 01060125
140 01060140
150 01060150
160 01060160
180 01060180
200 01060200
225 01060225
250 01060250
275 01060275
300 01060300
315 01060315
350 01060350
400 01060400
450 01060450
500 01060500
550 01060550
600 01060600
All dimensions in mm
Page 6 www.pmdvent.dk
Order code: SCB-D
diameter
Example: SCB-300: Clip band for mounting Ø300 pipe size.
D A kg
SCB
kg SCBL (legs)
Part no. SCB
Part no. SCBL (legs)
80 132 0.20
0.12
02350080
02360160
100 132 0.23 02350100
120 132 0.26 02350120
125 132 0.26 02350125
140 132 0.29 02350140
150 132 0.30 02350150
160 132 0.31 02350160
180 210 0.34 02350180
02360315
200 210 0.37 02350200
225 210 0.41 02350225
250 210 0.45 02350250
275 210 0.48 02350275
300 210 0.52 02350300
315 210 0.54 02350315
350 240 1.14 0.56 02350350 02360350
400 425 1.29 0.60 02350400 02360400
450 450 1.44 0.65 02350450 02360450
500 475 1.58 0.70 02350500 02360500
550 500 1.73 0.74 02350550 02360550
600 525 1.88 0.79 02350600 02360600
All dimensions in mm
CLIP BANDS – SCB/SCBL Group 2 – 0.7mm stainless steel pipe system
Ø350-600
Page 7 www.pmdvent.dk
Ø80-315
Clip bands and legs – SCB/SCBL are made from 2mm stainless steel thickness up to Ø315 and in 3mm for larger diameters.
Order code: (legs)
SCBL-D
Size of SCB
Example: SCBL-300: Clip band legs for clip bands sized 300.
PIPES – SPI Group 2 – 0.7mm stainless steel pipe system
D kg/m 0.5m
Part no. 1.0m
Part no. 2.0m
Part no.
80 1.23 02070080 02080080 02090080
100 1.52 02070100 02080100 02090100
120 1.82 02070120 02080120 02090120
125 1.89 02070125 02080125 02090125
140 2.12 02070140 02080140 02090140
150 2.27 02070150 02080150 02090150
160 2.41 02070160 02080160 02090160
180 2.70 02070180 02080180 02090180
200 3.00 02070200 02080200 02090200
225 3.36 02070225 02080225 02090225
250 3.73 02070250 02080250 02090250
275 4.10 02070275 02080275 02090275
300 4.47 02070300 02080300 02090300
315 4.84 02070315 02080315 02090315
350 5.21 02070350 02080350 02090350
400 5.94 02070400 02080400 02090400
450 5.37 02070450 02080450 02090450
500 5.96 02070500 02080500 02090500
550 6.55 02070550 02080550 02090550
600 7.15 02070600 02080600 02090600
All dimensions in mm
length
assembly
Stainless steel pipes - SPI are made from 0.5mm stainless steel for diameters up to Ø225 and in 0.7mm for larger diameters. The pipes are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Order code: SPI-D-L-SSR
diameter
Example: SPI-125-1.0-SSR 1.0m long stainless steel pipe with diameter 125mm and prepared for assembly by standard rings.
Page 8 www.pmdvent.dk
D kg Part no.
80 1.45 02100080
100 1.77 02100100
120 2.10 02100120
125 2.18 02100125
140 2.41 02100140
150 2.56 02100150
160 2.72 02100160
180 3.04 02100180
200 3.40 02100200
225 3.79 02100225
250 4.19 02100250
275 4,61 02100275
300 5,03 02100300
All dimensions in mm
TELESCOPE PIPES – STS Group 2 – 0.7mm stainless steel pipe system
Stainless steel telescope pipes - STS are made from 0.5mm stainless steel for diameters up to Ø225 and in 0.7mm for larger diameters. The length of the telescope can be adjusted from 0.5 to 1.0m. Length is fixed with a SQL. The telescopes are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Order code: STS-D-SSR
diameter
Example: STS-225-SWR Telescope pipe in stainless steel with diameter of 225mm, prepared for assembly by wide rings.
assembly
Page 9 www.pmdvent.dk
D A x B kg Part no.
80 80x150 0.77 02110080
100 100x150 0.91 02110100
120 100x150 1.07 02110120
125 100x150 1.10 02110125
140 100x150 1.22 02110140
150 100x150 1.30 02110150
160 100x150 1.37 02110160
180 100x150 1.53 02110180
200 100x150 1.69 02110200
225 100x150 1.87 02110225
250 100x150 2.06 02110250
275 100x150 2.26 02110275
300 100x150 2.46 02110300
315 100x150 2.64 02110315
350 150x200 2.84 02110350
400 150x200 3.22 02110400
450 150x200 4.50 02110450
500 150x200 4.98 02110500
550 150x200 5.46 02110550
600 150x200 5.96 02110600
All dimensions in mm
PIPES WITH INSPECTION HATCH – SPH Group 2 – 0.7mm stainless steel pipe system
Pipes with inspection hatch – SPH are made from 0.5mm stainless steel for diameters up to Ø225 and in 0.7mm for larger diameters. The pipes are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Order code: SPH-D-SSR
diameter
Example: SPH-225-SWR Stainless steel pipe with inspection hatch with diameter of 225mm, prepared for assembly by wide rings.
assembly
Page 10 www.pmdvent.dk
D kg/ 90°
90° Part no.
60° Part no.
45° Part no.
30° Part no.
15° Part no.
80 0.31 02120080 02130080 02140080 02150080 02160080
100 0.48 02120100 02130100 02140100 02150100 02160100
120 0.68 02120120 02130120 02140120 02150120 02160120
125 0.74 02120125 02130125 02140125 02150125 02160125
140 0.93 02120140 02130140 02140140 02150140 02160140
150 0.94 02120150 02130150 02140150 02150150 02160150
160 1.22 02120160 02130160 02140160 02150160 02160160
180 1.53 02120180 02130180 02140180 02150180 02160180
200 1.91 02120200 02130200 02140200 02150200 02160200
angle
assembly
All dimensions in mm
PRESSED BENDS – SBE Group 2 – 0.7mm stainless steel pipe system
Pressed bends - SBE are made from 0.7mm stainless steel. Bends are available in angles G= 15°, 30°, 45°, 60° or 90° All bends are with R= 1.5 x D The bends are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Order code: SBE-D-G-SSR
diameter
Example: SBE-150-30°-SSR 30° stainless steel pressed bend with diameter 150mm and prepared for assembly by standard rings.
Page 11 www.pmdvent.dk
Order code: SBE-D-G-SSR
diameter
Example: SBE-350-45°-SFL 45° stainless steel segmented bend with diameter 350mm, prepared for assembly by stainless steel flanges.
D kg/ 90°
90° Part no.
60° Part no.
45° Part no.
30° Part no.
15° Part no.
225 2.40 02170225 02180225 02190225 02200225 02210225
250 2.98 02170250 02180250 02190250 02200250 02210250
275 3,61 02170275 02180275 02190275 02200275 02210275
300 4.29 02170300 02180300 02190300 02200300 02210300
315 5.03 02170315 02180315 02190315 02200315 02210315
350 5.85 02170350 02180350 02190350 02200350 02210350
400 7.64 02170400 02180400 02190400 02200400 02210400
450 9.67 02170450 02180450 02190450 02200450 02210450
500 11.94 02170500 02180500 02190500 02200500 02210500
550 14.44 02170550 02180550 02190550 02200550 02210550
600 17.20 02170600 02180600 02190600 02200600 02210600
angle
assembly
All dimensions in mm
SEGMENTED BENDS – SBE Group 2 – 0.7mm stainless steel pipe system
Segmented bends – SBE are made from 0.5mm stainless steel for diameters up to Ø350 and in 0.7mm for larger diameters. Segments are 15°. Bends are available in angles G= 15°, 30°, 45°, 60° or 90°. All bends are with R= 1.5 x D. Other radii upon request. The bends are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Page 12 www.pmdvent.dk
Order code: STB-A-B-C-30-SSR
diameters
angle
Example: STB-250-150-200-30°-SWR: 150mm branch at an angle of 30° on a 250mm to 200mm taper. Prepared for assembly by wide rings. ( L1=450; L2=29; L3=444 )
assembly
B L1 30°
L1 45°
kg Part no.
80 350 300 0.88 02220080
100 350 300 0.90 02220100
120 400 350 1.05 02220120
125 450 350 1.06 02220125
140 450 350 1.10 02220140
150 450 400 1.12 02220150
160 550 400 1.60 02220160
180 550 400 1.84 02220180
200 600 450 2.08 02220200
225 750 500 2.88 02220225
250 750 500 3.36 02220250
275 750 600 4.72 02220275
300 850 600 5.12 02220300
315 950 600 5.44 02220315
350 1050 700 8.24 02220350
400 1250 800 10.4 02220400
450 1250 950 15.0 02220450
500 1250 1050 16.5 02220500
550 1450 1150 17.6 02220550
600 1650 1150 20.1 02220600
All dimensions in mm
TAPERED BRANCHES – STB Group 2 – 0.7mm stainless steel pipe system
Tapered branches - STB are made from 0.5mm stainless steel up to diameter Ø225 and in 0.7mm for larger diameters. Branch angle values: 30° : U=2.3 ; Y=0.86 ; Z=0.3 45° : U=4.0 ; Y=0.71 ; Z=0.5 Branch configuration rules: (A – C) ≤ 200 and C ≥ (2B – A) Calculation of branch dimensions: L2 = ( L1 / 2 ) – ( A + C ) / U L3 = ( L1 - L2 ) / Y – ( Z x B ) Branches are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL). Tapered branches with diameter (A or C) larger than 180mm are provided with extensions of 50mm.
Page 13 www.pmdvent.dk
B L1 30°
L1 45°
Kg Part no.
80 350 300 0.88 02230080
100 350 300 0.90 02230100
120 350 350 0.96 02230120
125 400 350 1.04 02230125
140 450 350 1.10 02230140
150 450 400 1.40 02230150
160 450 400 1.60 02230160
180 550 400 1.84 02230180
200 550 450 2.08 02230200
225 600 500 2.88 02230225
250 750 500 3.36 02230250
275 750 600 4.72 02230275
300 750 600 5.12 02230300
315 850 600 5.44 02230315
350 950 700 8.24 02230350
400 1050 800 10.4 02230400
450 1250 950 15.0 02230450
500 1250 1050 16.5 02230500
550 1450 1150 17.6 02230550
600 1450 1150 20.2 02230600
All dimensions in mm
EVEN BRANCHES – SEB Group 2 – 0.7mm stainless steel pipe system
Even branches - SEB are made from 0.5mm stainless steel up to diameter Ø225 and 0.7mm for larger diameters. Branch angle values: 30° : U= 0.58 ; Y= 0.86 ; Z= 0.3 45° : U= 1.0 ; Y= 0.71 ; Z= 0.5 Calculation of branch dimensions: L2 = ( L1 – A / U ) / 2 [L2 can be negative] L3 = ( L1 - L2 ) / Y - (Z x B) Branches are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL). Diameters B may not be larger than A.
Order code: SEB-A-B-30-SSR
diameters
angle
Example: SEB-250-150-45°-SWR: 150mm stainless steel branch on a 250mm diameter set piece. Branch angle of 45°, prepared for assembly by wide rings. ( L1=500 ; L2=125; L3=403 )
assembly
Page 14 www.pmdvent.dk
Order code: STE-A-B-SSR
diameters
assembly
Example: STE-150-120-SSR: 150mm diameter stainless steel tee with 120mm tee connection. To be assembled by standard rings.
A, B L1 L2 kg Part no.
80 230 75 0.50 02240080
100 250 75 0.63 02240100
120 270 75 0.79 02240120
125 275 75 0.84 02240125
140 290 75 0.97 02240140
150 300 75 1.06 02240150
160 310 75 1.16 02240160
180 330 75 1.36 02240180
200 350 75 1.73 02240200
225 425 100 2.04 02240225
250 450 100 2.36 02240250
275 475 100 2.71 02240275
300 500 100 3.78 02240300
315 515 100 4.04 02240315
350 550 100 4.68 02240350
400 600 100 5.97 02240400
450 750 150 8.86 02240450
500 800 150 11.32 02240500
550 850 150 13.54 02240550
600 900 150 15.37 02240600
All dimensions in mm
90° BRANCH – STE Group 2 – 0.7mm stainless steel pipe system
Tees – STE are made from 0.5mm stainless steel up to Ø225 and 0.7mm for larger diameters. Tees are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL). Diameters B may not be larger than A.
Page 15 www.pmdvent.dk
Order code: STR-A-B-SSR
diameters
assembly
Example: STR-350-250-SWR: 350mm diameter stainless steel trouser piece with 2x 250mm branches. To be assembled by wide rings.
A kg Part no.
80 0.32 02250080
100 0.40 02250100
120 0.56 02250120
125 0.58 02250125
140 0.64 02250140
150 0.72 02250150
160 0.80 02250160
180 0.96 02250180
200 1.36 02250200
225 1.60 02250225
250 1.84 02250250
275 2.00 02250275
300 2.16 02250300
315 2.24 02250315
350 2.72 02250350
400 3.04 02250400
450 4.88 02250450
500 5.36 02250500
550 6.88 02250550
600 7.60 02250600
All dimensions in mm
TROUSERS – STR Group 2 – 0.7mm stainless steel pipe system
Trouser pieces – STR are made from 0.5mm stainless steel up to Ø225 and 0.7mm for larger diameters. Trouser pieces are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL). Calculation of trouser dimensions: L1 = ( A x 0.13 ) + 50 L2 = ( B x 0.86 ) + 150 B may not be larger than A.
Page 16 www.pmdvent.dk
B L1 30°
L1 45°
Kg Part no.
80 350 300 0.55 02260080
100 350 300 0.60 02260100
120 350 350 0.65 02260120
125 400 350 0.70 02260125
140 450 350 0.80 02260140
150 450 400 0.90 02260150
160 450 400 1.00 02260160
180 550 400 1.15 02260180
200 550 450 1.30 02260200
225 600 500 1.80 02260225
250 750 500 2.10 02260250
275 750 600 3.0 02260275
300 750 600 3.2 02260300
315 850 600 3.4 02260315
350 950 700 5.1 02260350
400 1050 800 6.6 02260400
450 1250 950 9.4 02260450
500 1250 1050 10.3 02260500
550 1450 1150 11.0 02260550
600 1450 1150 12.3 02260600
All dimensions in mm
BRANCH PLATES – SBP Group 2 – 0.7mm stainless steel pipe system
Branch plates - SBP are made from 0.5mm stainless steel up to Ø225 and 0.7mm for larger diameters. Branch angle values: 30° : U= 0.58 ; Y= 0.86 ; Z= 0.3 45° : U= 1.0 ; Y= 0.71 ; Z= 0.5 Calculation of branch dimensions: L2 = ( L1 – A / U ) / 2 [L2 can be negative] L3 = ( L1 - L2 ) / Y - (Z x B) Branches are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Diameters B may not be larger than A.
Order code: SBP-A-B-30-SSR
diameters
angle
Example: SBP-250-125-30°-SSR: 125mm stainless steel branch on a 250mm diameter set piece. Branch angle of 30°. Prepared for assembly by standard rings. ( L1=400 ; L2= -15; L3=445 )
assembly
Page 17 www.pmdvent.dk
Order code: STP-A-B-SSR
diameters
assembly
Example: STP-150-120-SSR: 150mm diameter stainless steel tee plate with 120mm tee connection. To be assembled by standard rings.
B L1 L2 kg Part no.
80 280 100 0.38 02270080
100 300 100 0.48 02270100
120 320 100 0.60 02270120
125 325 100 0.64 02270125
140 340 100 0.73 02270140
150 350 100 0.81 02270150
160 360 100 0.88 02270160
180 380 100 1.03 02270180
200 400 150 1.35 02270200
225 425 150 1.57 02270225
250 450 150 1.82 02270250
275 475 150 2.08 02270275
300 600 200 2.92 02270300
315 615 200 3.11 02270315
350 650 200 3.59 02270350
400 700 250 4.64 02270400
450 750 250 6.83 02270450
500 900 250 8.62 02270500
550 950 300 10.4 02270550
600 1000 300 11.7 02270600
All dimensions in mm
90° BRANCH PLATE – STP Group 2 – 0.7mm stainless steel pipe system
Tee plates – STP are made from 0.7mm stainless steel. Branches on the tee plates are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL). Diameters B may not be larger than A.
Page 18 www.pmdvent.dk
Order code: SRD-D-d-SSR
diameters
assembly
Example: SRD-250-150-SWR: Stainless steel reducer from 250 to 150mm. With 50mm extension on D. ( L = 250 ).
D Part no.
100 02280100
120 02280120
125 02280125
140 02280140
150 02280150
160 02280160
180 02280180
200 02280200
225 02280225
250 02280250
275 02280275
300 02280300
315 02280315
350 02280350
400 02280400
450 02280450
500 02280500
550 02260550
600 02280600
All dimensions in mm
REDUCERS - SRD Group 2 – 0.7mm stainless steel pipe system
Reducers – SRD are made from 0.5mm stainless steel up to Ø225 and in 0.7mm for larger diameters. Calculation of reducer dimension: L = 2 x ( D – d ) + 50 Reducer configuration rule: ( D – d ) ≤ 450 50mm ext. is provided for diameter ≥ 200 Reducers are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Page 19 www.pmdvent.dk
Order code: STX-D-SSR / A-B-NIL
diameter
□ assembly
Example: STX-300-SWR / 600-400-SFL: Stainless steel transition from Ø300 with wire ring connection to rectangular 400 x 600 with stainless steel flange connection. ( L = 390 ).
D Part no.
80 02290080
100 02290100
120 02290120
125 02290125
140 02290140
150 02290150
160 02290160
180 02290180
200 02290200
225 02290225
250 02290250
275 02290275
300 02290300
315 02290315
350 02290350
400 02290400
450 02290450
500 02290500
550 02290550
600 02290600
All dimensions in mm
TRANSITIONS - STX Group 2 – 0.7mm stainless steel pipe system
Transitions – STX are made from 0.7mm stainless steel. Calculation of transition dimensions: Y = ( A - D ) for A > B Y = ( B - D ) for B > A L = 240 + Y / 2 Z ≤ 35° Transitions are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
Ø assembly
rectangular
Nil = plain 10mm / SFL = flange
Page 20 www.pmdvent.dk
Order code: SHS-D-SSR
diameter
Example: SHS-160-SSR: Stainless steel hose spigot for flexible hose with inner diameter of Ø162 with standard ring connection to piping system.
D Part no.
80 02300080
100 02300100
120 02300120
125 02300125
140 02300140
150 02300150
160 02300160
180 02300180
200 02300200
225 02300225
250 02300250
275 02300275
300 02300300
315 02300315
350 02300350
400 02300400
All dimensions in mm
HOSE SPIGOTS - SHS Group 2 – 0.7mm stainless steel pipe system
Hose spigots – SHS are made from 0.5mm stainless steel up to Ø225 and 0.7mm for larger diameters. Hose spigots are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
assembly
Page 21 www.pmdvent.dk
Order code: SJC-D-SSR
diameter
Example: SJC-300-SWR: Jet cap with diameter Ø300. Connected with wide ring to pipe system.
D A L kg Part no.
120 185 325 1.28 02330120
125 195 340 1.41 02330125
140 215 365 1.67 02330140
150 230 390 1.90 02330150
160 245 410 2.12 02330160
180 275 445 2.59 02330180
200 305 490 3.14 02330200
225 345 535 3.86 02330225
250 380 590 4.68 02330250
275 420 640 5.59 02330275
300 460 690 6.57 02330300
315 480 720 7.17 02330315
350 535 785 8.68 02330350
400 610 885 13.9 02330400
450 690 985 17.4 02330450
500 765 1095 21.4 02330500
550 840 1200 25.7 02330550
600 915 1300 30.3 02330600
All dimensions in mm
JET CAPS - SJC Group 2 – 0.7mm stainless steel pipe system
Jet caps – SJC is made of 0.7mm stainless steel. Jet caps are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL). Jet caps are fitted with internal water tray and drain hose. The outlet of the jet cap is fitted with bird mesh.
assembly
Page 22 www.pmdvent.dk
Order code: SRC-D-SSR
diameter
Example: SRC-400-SWR: Rain cap with diameter Ø400. Connected with wide ring to pipe system.
D A B C H kg Part no.
120 75 50 250 150 0.82 02340120
125 75 50 250 150 0.82 02340125
140 75 50 300 190 1.05 02340140
150 100 50 300 190 1.12 02340150
160 100 50 350 190 1.31 02340160
180 100 50 350 220 1.39 02340180
200 100 50 400 220 1.94 02340200
225 100 50 400 240 2.05 02340225
250 100 50 500 240 2.52 02340250
275 100 50 500 240 2.56 02340275
300 150 100 600 340 4.14 02340300
315 150 100 650 340 4.52 02340315
350 150 100 650 340 4.60 02340350
400 150 100 650 370 5.72 02340400
450 150 100 750 370 6.79 02340450
500 150 100 850 440 8.16 02340500
550 150 100 900 440 9.73 02340550
600 150 100 950 480 10.5 02340600
All dimensions in mm
RAIN CAPS - SRC Group 2 – 0.7mm stainless steel pipe system
Rain caps – SRC are made from 0.7mm stainless steel. Rain caps are made with beadings for assembly by SSR, SWR, SQL or with loose flanges (SFL).
assembly
Page 23 www.pmdvent.dk
EXHAUST & VENTILATION
PMD Ventilation A/S Navervej 18 DK-7430 Ikast CVR. 34586020
Tel: (45) 3696 8920 Skype: pmdventilation [email protected] www.pmdvent.dk