07.05 - usesi.com · Dimensional Drawings For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures,

07.05.16

VLX - LED Luminaire

The new VLX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 96 to 192 LEDs in one fixture size, that looks perfect with any of the LED configurations; thereby enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 18,000+ lumen package with life expectancy of well over 20 years; or 46,000+ lumens for your higher wattage needs. For general parking, pedestrian areas, and roadways; the VLX LED series brings contemporary LED lighting design into the 21st century. Fixture Construction • Die-cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs for extreme long life of the LEDs.• Two piece, tool-less entry, die-cast mounting arm and driver compartment for ease of mounting, and driver maintenance.• A pole mounting design that simplifies the installation of the fixture.• Engineered optical assemblies with seven distribution patterns. LED Technology• 96 to 192 LEDs• 530, 700 or 1000 mA ratings.• 18,000 to 46,000+ lumen package available.• 3000, 4000 or 5000 Kelvin for natural or white light.• Full cutoff optics available in seven distribution patterns.• 69,000 to 126,000 hours or more of life for the LEDs• Add dimming controls for increased cost savings and project flexibility. Applications• The VLX LED Series is destined to become the standard for which LED area lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. From shopping centers to auto dealerships; to general parking lots to roadways; the VLX LED series is the transition of LED lighting into tomorrow.

Dimensional Drawings

For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.

VLX LED

Model Optics Source Current Voltage Mounting Finish OptionsArm Mount

(AM)

Wall Mount*Cast Wall Plate (BAWP) to be ordered separately

(WM)

Round Pole Plate Adaptors (RPP) are to be ordered separately.

Bronze(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Grey(GY)

Silver Metallic(SL)

Custom Color(CC)

KelvinPhotocell & Receptacle

*Specify voltage(PCR120) (PCR208)(PCR240) (PCR277)

Photo Receptacle (PER)*With shorting cap

Round Pole Plate AdaptorFor 3”Ø Pole (RPP3)For 4”Ø Pole (RPP4)For 5”Ø Pole (RPP5)

Cast Wall Plate(BAWP)

0-10v Dimming DriverNo Controls(DIM)

Motion Sensor*Works with FSP-211

(WSC-8)8’ Mounting Height(WSC-20)

9-20’ Mounting Height(WSC-40)

21-40’ Mounting Height

This option will require(1) FSIR 100 remote for programing

Wireless ControlConsult Factory

(WC)

Universal PoleMount Adaptor

(UPMA)

Cutoff Louver Shield(CLS)

120-277*Universal

voltage(UNV)

480(5)

Not available in 1 amp

347(8)

Not available in 1 amp

mA530(5)

700(7)

1000(10)

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type IV-A(T4A)

Type IV-AR(T4AR)

Rotated Right

Type IV-AL(T4AL)

Rotated Left

Type V(T5)

Type V-W(T5W)

# of LEDs96

(96LC)

128*(128LC)

160*(160LC)

192*(192LC)

VLX-1

*1000 mA NOT AVAILABLE FOR 128LC, 160LC OR 192LC

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

The new VLX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines LED performance and advanced LED thermal management technology and provides outdoor lighting that is both energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate die cast aluminum housings. Easy tool-less access for mounting and maintenance.

The LED light assemblies come with 96 to 192 LEDs. Seven optical distribution patterns are available. Choose between 3000, 4000 or 5000 Kelvin temperature of the LEDs.

A durable polyester powder coat finish is guaranteed for five years; and is available in standard or custom colors.

The VLX LED series is an exceptional choice for commercial parking lots, office complexes, architectural projects, and other general lighting projects.

C

BD

A

2 1/2’’Ø 3/8’’

CL

1’’

1’’

Ø 1’’

Ø 3/8’’

VLX DRILL DIAGRAM

Fixture A B C D Max. Watts LbsVLX-1 36” 10.25” 15.5” 4” 414 58

Project Name: Catalog Number: Type

19645 Rancho Way Rancho Dominguez, CA 90220Tel: (310) 512-6480 Fax: (310) 512-6486

www.visionairelighting.com

VLX LED

Heatsink• Die cast aluminum heatsink with integral cooling fins for thermal management.

Mounting Arm/Driver Compartment•Durable two-piece die cast aluminum driver compartment utilizes a tool-less push button latch for ease of maintenance and sealed with a one-piece silicone gasket.

Thermal Management • The VLX series provides excellent thermal management by mounting the LEDs to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life. • The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The VLX series LEDs have been determined to last 90,000+ hours in 25° C environments when driven at 530 mA.

Optical System • The highest lumen output LEDs are utilized in the VLX series. IES distribution Types I, II, III, IV, IV-A , V and V-W are available. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution.

• CRI values are 70.

Quali-Guard® Finish• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.

• Finish is guaranteed for five (5) years.

Electrical Assembly• The VLX LED series is supplied with a choice of 530, 700 or 1000 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40°C operations.• 10 kV surge protector supplied as standard.• Terminal block supplied as standard.Warranty • Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit visionairelighting.com. Options • Photocell & receptacle • Photo receptacle• Round pole plate adapter • Cast Wall Plate • 0-10v Dimming Driver• Motion Sensor• Wireless Control• Universal Pole Mount Adaptor• Cutoff Louver Shield Listings • The VLX is cUL listed• IP65 Rated• Powder Coated Tough.• DLC Listed

EPA Data 1.0 1.6 2.0 2.5 2.4 2.5

IP65RATED

DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC) listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/

VLX 5K Lumen Data *Lumen Chart Data updated 07.05.16

# LED’s mA Type 1 LPW Type 2 LPW Type 3 LPW Type 4 LPW Type 4A LPW Type 5 LPW Type 5W LPW Watts

96 350 14940 145 13950 135 14173 137 13360 129 14979 145 14526 141 14528 141 103

530 21928 138 20474 129 20802 131 19608 123 21984 138 21320 134 21322 134 159

700 27638 128 25806 120 26219 122 24715 115 27709 129 26872 125 26875 125 215

1000 34613 106 32318 99 32835 101 30952 95 34701 107 33653 104 33657 104 325

128 350 20420 150 19066 140 19371 143 18260 134 20472 151 19854 146 19856 146 136

530 27798 129 25956 120 26371 122 24858 115 27869 129 27027 125 27030 125 215

700 34635 122 32339 114 32857 115 30972 109 34724 122 33675 118 33678 118 285

160 350 23772 137 22197 128 22552 130 21258 123 23833 137 23113 133 23116 133 173

530 38242 143 35707 134 36278 136 34197 128 38340 144 37181 140 37186 140 267

700 47249 134 44117 125 44823 127 42252 120 47370 134 45939 130 45944 130 353

192 350 31145 151 29080 141 29546 144 27851 135 31225 152 30281 147 30285 147 206

530 41904 132 39126 123 39752 125 37472 118 42011 132 40742 128 40746 128 317

700 51721 123 48293 115 49066 116 46251 110 51854 123 50287 119 50293 119 421

Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here. *For 4000K multiply values by 0.95 *For 3000K multiply values by 0.90

VMX - LED Luminaire

The new VMX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 32 to 96 LEDs in one fixture size, that looks perfect with any of the LED configurations; thereby enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 4,500+ lumen package with life expectancy of well over 20 years; or 23,000+ lumens for your higher wattage needs. For general parking lots, pedestrian areas, and roadways; the VMX LED series brings contemporary LED lighting design into the 21st century. Fixture Construction • Die-cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs for extreme long life of the LEDs.• Two piece, tool-less entry, die-cast mounting arm and driver compartment for ease of mounting, and driver maintenance.• A pole mounting design that simplifies the installation of the fixture.• Engineered optical assemblies with six distribution patterns. LED Technology• 32 to 96 LEDs• 350, 530, 700 or 1000 mA ratings.• 4,500 to 23,000+ lumen package available.• 3000, 4000 or 5000 Kelvin for natural or white light.• Full cutoff optics available in six distribution patterns.• 50,000 to 100,000 hours or more of life for the LEDs• Add dimming controls for increased cost savings and project flexibility. Applications• The VMX LED Series is destined to become the standard for which LED area lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. From general parking lots; to roadways; to shopping centers; the VMX LED series is the transition of LED lighting into tomorrow.



10



VMX LED


(AM)


(WM)

Round Pole Plate Adaptors

*UPMA to be ordered separately

(RPP) are to be ordered separately.

Bronze(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Grey(GY)

Silver Metallic(SL)

Custom Color(CC)

Kelvin120-277

*Universalvoltage

(UNV)

480*(5)

347*(8)

Type II(T2)

Type III(T3)

Type IV(T4)

Type IV-A(T4A)

Type V(T5)

Type V-W(T5W)

# of LEDsVMX-1 mA350(3)

530(5)

700(7)

*1000(10)

32(32LC)

64(64LC)

96(96LC)

*347V & 480Vno available

in 32LC 350mA

*Not availablein 96LC

*Not availablein 1000mA

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

Photocell & Receptacle*Specify voltage

(PCR120) (PCR208)(PCR240) (PCR277)











(WC)


(UPMA)

Cutoff Louver Shield(CLS)

Type I(T1)

The new VMX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines LED performance and advanced LED thermal management technology and provides outdoor lighting that is both energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate cast aluminum housings. Easy tool-less access for mounting and maintenance.



The VMX LED series is an exceptional choice for commercial parking lots, office complexes, architectural projects, and other general lighting projects.

A

DB

C

2 1/2’’Ø 3/8’’

CL

1’’

1’’

Ø 1’’

Ø 3/8’’

VMX DRILL DIAGRAM

Fixture A B C D Max. Watts LbsVMX-1 29” 10.75” 15.5” 4” 214 49




11

IP65RATED

VMX LED

Heatsink• Cast aluminum heatsink with integral cooling fins for thermal management.

Mounting Arm/Driver Compartment•Durable two-piece die cast aluminum driver compartment utilizes a tool-less push button latch for ease of maintenance and sealed with a one-piece silicone gasket.

Thermal Management • The VMX series provides excellent thermal management by mounting the LEDs to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life. • The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The VMX series LEDs have been determined to last 100,000+ hours in 25° C environments when driven at 350 mA.

Optical System • The highest lumen output, LEDs are utilized in the VMX series. IES distribution Types I, II, III, IV, IV-A , V and V-W are available. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution.• CRI values are 70 for 3000K, 70 for 4000K and 70 for 5000K.

Quali-Guard® Finish• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.• Finish is guaranteed for five (5) years.

Electrical Assembly• The VMX LED series is supplied with a choice of 350, 530, 700 or 1000 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40°C operations.• 10 kV surge protector supplied as standard.• Terminal block supplied as standard.

Warranty • Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit visionairelighting.com. Options • Photocell & receptacle • Photo receptacle• Round pole plate adapter • Cast Wall Plate • 0-10v Dimming Driver• Motion Sensor• Wireless Control• Universal Pole Mount Adaptor• Cut-Off Louver Shield Listings

• The VMX Series is cUL Listed• IP65 Rated• Powder Coated Tough• DLC Listed

VMX LUMEN DATA Updated Lumen Chart 08.27.15

# LEDs

mA Type 1 B U G Type 2 B U G Type 3 B U G Type 4 B U G Type 4A

B U G Type 5 B U G Type 5W

B U G Watts

32 350 5134 2 0 2 4557 1 0 2 4777 1 0 1 4612 1 0 1 5141 1 0 1 4950 2 0 1 4837 3 0 1 36

530 7230 3 0 3 6417 2 0 2 6728 1 0 2 6496 1 0 2 7240 1 0 1 6972 3 0 1 6812 3 0 1 55

700 9150 3 0 3 8122 2 0 2 8515 1 0 2 8221 2 0 2 9163 2 0 1 8824 3 0 1 8621 3 0 2 74

1000 12774 3 0 3 11338 2 0 3 11887 2 0 2 11477 2 0 2 12792 2 0 2 12318 3 0 2 12035 4 0 2 115

64 350 9325 3 0 3 8277 2 0 2 8677 1 0 2 8378 2 0 2 9338 2 0 1 8992 3 0 1 8785 3 0 2 71

530 13197 3 0 3 11714 2 0 3 12281 2 0 2 11857 2 0 2 13216 2 0 2 12726 3 0 2 12434 4 0 2 109

700 16756 4 0 4 14873 3 0 3 15592 2 0 3 15054 3 0 3 16780 2 0 2 16158 4 0 2 15786 4 0 2 145

1000 22002 4 0 4 19529 3 0 4 20474 3 0 3 19768 3 0 3 22034 3 0 2 21217 4 0 2 20729 5 0 3 228

96 350 13649 3 0 3 12115 3 0 3 12701 2 0 2 12262 2 0 2 13668 2 0 2 13162 3 0 2 12859 4 0 2 102

530 19578 4 0 4 17377 3 0 3 18218 2 0 3 17589 3 0 3 19606 3 0 2 18879 4 0 2 18445 4 0 2 163

700 23343 4 0 4 20719 3 0 4 21722 3 0 3 20972 3 0 3 23376 3 0 3 22510 4 0 2 21992 5 0 3 214

Visit www.visionairelighting.com for up-to-the-minute chart information, including types not listed here. *For 4000K multiply values by 0.95 *For 3000K multiply values by 0.90


EPA Data 0.75 1.47 1.5 2.22 2.1 2.22

VSX - LED Luminaire

The new VSX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 16 to 48 LEDs in one fixture size, that looks perfect with any of the LED configurations; thereby enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 2,100+ lumen package with life expectancy of well over 20 years; or 15,000+ lumens for your higher wattage needs. For small scale general parking areas and pedestrian areas; the VSX LED series brings contemporary LED lighting design into the 21st century. Fixture Construction • Cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs for extreme long life of the LEDs.• Two piece, tool-less entry, cast mounting arm and driver compartment for ease of mounting, and driver maintenance.• A pole mounting design that simplifies the installation of the fixture.• Engineered optical assemblies with six distribution patterns. LED Technology• 16 to 48 LEDs• 350, 530, 700 or 1000 mA ratings.•15,000+ lumen package available.• 3000, 4000 or 5000 Kelvin for warm, natural or white light.• Full cutoff optics available in seven distribution patterns.• 50,000 to 100,000 hours or more of life for the LEDs• Add dimming controls for increased cost savings and project flexibility. Applications• The VSX LED Series is destined to become the standard for which LED area lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. From small scale general parking and pedestrian areas; the VSX LED series is the transition of LED lighting into tomorrow.



14

VSX LED


(AM)


(WM)

Round Pole Plate Adaptors (RPP) are to be ordered separately.

Bronze(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Grey(GY)

Silver Metallic(SL)

Custom Color(CC)

Kelvin120-277

*Universalvoltage

(UNV)

480*(5)

347*(8)

mA350(3)

530(5)

700(7)

1000(10)

# of LEDsVSX-1

*347V & 480Vnot available

in 16LC

*347V & 480Vnot available

in 32LC 350mA

16(16LC)

32*(32LC)

48(48LC)

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

Photocell & Receptacle*Specify voltage

(PCR120) (PCR208)(PCR240) (PCR277)











(WC)


(UPMA)

*UPMA to be ordered separately

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type IV-A(T4A)

Type V(T5)

Type V-W(T5W)

The VSX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines LED performance and advanced LED thermal management technology and provides outdoor lighting that is both energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate cast aluminum housings. Easy captive screw access for mounting and maintenance.



The VSX LED series is an exceptional choice for commercial parking lots, office complexes, architectural projects, and other general lighting projects.

VSX-1 25Fixture A B Lbs

107WC D Max. Watts

23” 8” 12.5” 4”

2 1/2’’Ø 3/8’’

CL

1’’

1’’

Ø 1’’

Ø 3/8’’

VSX DRILL DIAGRAM

A

B

C

D




15

VSX LED

Housing• Cast aluminum LED housing with integral cooling fins for thermal management.

Mounting Arm/Driver Compartment•Durable two-piece cast aluminum driver compartment utilizes a captive screw for ease of maintenance and sealed with a one-piece silicone gasket.

Thermal Management • The VSX series provides excellent thermal management by mounting the LEDs to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life. • The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The VSX series LEDs have been determined to last 100,000+ hours in 25° C environments when driven at 350 mA.

Optical System • The highest lumen output LEDs are utilized in the VSX series. IES distribution Types I, II, III, IV, IV-A , V and V-W are available. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution.• CRI values are 70.

Quali-Guard® Finish• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.• Finish is guaranteed for five (5) years.

Electrical Assembly• The VSX LED series is supplied with a choice of 350, 530, 700 or 1000 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40°C operations.• 10 kV surge protector supplied as standard.• Terminal block supplied as standard.

Warranty • Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit visionairelighting.com. Options • Photocell & receptacle • Photo receptacle• Round pole plate adapter • Cast Wall Plate • 0-10v Dimming Driver• Motion Sensor• Wireless Control• Universal Pole Mount Adaptor Listings• The VSX Series is cUL Listed• DLC Listed• Powder Coated Tough


VSX 4K Lumen Data *Lumen Chart Updated 06.20.16

#LED mA Type 1 Type 2 Type 3 Type 4 Type 4A Type 5 Type 5W Watts

16 350 2328 2142 2159 2113 2337 2276 2152 18

530 3123 2874 2897 2835 3135 3053 2888 26

700 4123 3793 3824 3742 4138 4030 3811 37

1000 5818 5353 5396 5281 5840 5688 5379 57

32 350 4617 4247 4282 4190 4633 4513 4268 37

530 6194 5699 5744 5622 6217 6055 5726 57

700 7083 6517 6569 6429 7109 6924 6548 75

1000 10582 9736 9814 9605 10621 10345 9783 113

48 350 6334 5828 5875 5749 6358 6192 5856 55

530 8499 7819 7882 7714 8530 8308 7857 82

700 10676 9822 9901 9690 10715 10437 9870 108

1000 14446 13291 13398 13112 14499 14122 13355 165

VSX 5K Lumen Data *Lumen Chart Updated 06.20.16

16 350 2451 2254 2237 2224 2459 2396 2265 18

530 3288 3025 3049 2984 3300 3214 3040 26

700 4340 3993 4025 3939 4356 4242 4012 37

1000 6125 5635 5680 5559 6147 5987 5662 57

32 350 4860 4471 4507 4411 4877 4751 4493 37

530 6520 5998 6047 5918 6544 6374 6028 57

700 7456 6860 6915 6767 7483 7289 6893 75

1000 11139 10248 10331 10111 11180 10890 10298 113

48 350 6668 6134 6184 6052 6692 6518 6164 55

530 8946 8231 8297 8120 8979 8746 8271 82

700 11238 10339 10422 10200 11279 10986 10389 108

1000 15206 13990 14103 13802 15262 14866 14058 165

Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.*For 3000K multiply values by 0.90

VBL - Architectural LED Luminaire / Bollard

The new V-Bollard LED Luminaire from Visionaire combines unique contemporary design with new LED technology and provides optimum lighting and energy savings over traditional lighting systems. Choose the Architectural LED Luminaire for pedestrian scale or the bollard for low level applications.

LED Technology• 16L to 48L LED’s in the single or up to 96 in the double available in 350, 530, 700 or 1000 mA ratings.• 3000, 4000 or 5000 Kelvin for warm, natural or white light.• Full cutoff optics available in six distribution patterns.• 50,000 to 140,000 hours of life for the LED’s

Construction• Cast aluminum construction throughout provides lasting durability for the V-Bollard - LED series.• The separate driver compartment allows for cooler operation and longer life of the driver.• Driver maintenance is simplified with quick disconnects provided as a standard feature.• The LED’s are mounted to an cast aluminum heat sink built to draw heat away from the LED junction points for extended LED life; and are housed totally independent from the driver.

Applications• The V-Bollard - LED series can be used for a variety of lighting projects. • Low level lighting for pathways and landscape lighting• Higher level lighting for pedestrian and walkway lighting• 19 to 117 watts of energy efficient lighting in single light engine version.



VBL LED

Model Height Optics Source CurrentConfig. Voltage Mounting Finish OptionsBronze

(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Grey(GY)

Silver Metallic(SL)

Custom Color(CC)

KelvinButton Type Photocell

*Specify voltage(PC120) (PC208)(PC240) (PC277)


120-277*Universal

voltage(UNV)

mA350(3)

530(5)

700(7)

1000*(10)

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type V(T5)

Type V-W(T5W)

Single(S)

Double(D)

# of LEDs16

(16LC)*Not Available

in doubleconfiguration

32(32LC)

48(48LC)

64(64LC)

96(96LC)

VBL-1 36”(3)

42”(3.5)

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

*1000mAnot available

for 48LCsingle or

96LCdouble

Anchor Base (ANCHOR BOLT KIT SUPPLIED)

(AB)

The new V-Bollard LED Series continues the unique contemporary design inspired by the sleek styling of the V Collection. Separating the Driver(s) from the individual cast aluminum LED engines: optimize the life of the LEDs and the Driver(s); and maximizes the lumen output of the fixture.

The LED light assemblies come in multiples of 16, 32 or 48 LEDs; and are offered in up to 96 LED’s.

Six optical distribution patterns are available. Choose between 3000, 4000 or 5000 Kelvin temperature of the LED’s.

A durable polyester powdercoat finish is guaranteed for five years; and is available in standard or custom colors.

The V-Bollard LED series is an exceptional choice for low level or pedestrian scale lighting applications.

C

B

A

C

A

B

Fixture A B C Max. LEDs Lbs

VBL-1 Single 14.5” 10.5” 4” 48 27

VBL-1 Dou-ble 25” 10.5” 4” 96 40




VBL LED

Housing• Cast aluminum heatsink with integral cooling fins for thermal management. The 4” extruded pole contains the driver(s), allowing for cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for weather tight operation.

Thermal Management• The V-Bollard Series provides excellent overall thermal management by maximizing the fixture’s heatsink capabilities. This enables the V-Bollard Series to withstand higher ambient temperatures and drive currents without degrading LED life. The V-Bollard Series has a very low thermal resistance rating.• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The V-Bollard Series LEDs have been determined to last a minimum of 100,000 hours in 25° C environments when driven at 350 mA.

Optical System• The highest lumen output LEDs are utilized in the V-Bollard Series. IES distribution Types I, II, III, IV, V and V-W are available. LED light assemblies come in multiples of 16 LEDs. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution.


Quali-Guard® Finish• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Finish is guaranteed for five (5) years

MountingThe V-Bollard Luminaire is easily attached to the pole by 2 tamper-proof countersunk screws.

Electrical Assembly• The V-Bollard LED series is supplied with a choice of 350, 530, 700 or 1000 mA high-performance LED drivers that accept 120v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40°C operations.• 10 kV surge protector supplied as standard.

Warranty• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com.Options• Button Type Photocell• 0-10v Dimming Driver

Listings• The V-Bollard is cUL Listed, suitable for wet locations.• IP-65 Rated• Powder Coated Tough.

IP65RATED

4K Lumen Data * Chart updated 02.04.16

# of LEDs

mA TYPE 1 B U G TYPE 2 B U G TYPE 3 B U G TYPE 4 B U G TYPE 5 B U G TYPE 5W B U G Watts

161 Side

350 2287 1 0 1 2060 1 0 1 2119 1 0 1 2014 1 0 1 2153 1 0 1 2062 1 0 1 19

530 3088 2 0 2 2781 1 0 1 2861 1 0 1 2719 1 0 1 2907 2 0 1 2784 2 0 1 27

700 3886 2 0 2 3500 1 0 2 3601 1 0 1 3423 1 0 1 3659 2 0 1 3504 2 0 1 37

1000 5843 2 0 2 5263 1 0 2 5415 1 0 1 5146 1 0 1 5501 2 0 1 5268 2 0 1 58

321 Side

350 4503 2 0 2 4056 1 0 2 4173 1 0 1 3966 1 0 1 4239 2 0 1 4060 2 0 1 36

530 6415 3 0 3 5810 2 0 2 5978 1 0 1 5681 1 0 2 6073 3 0 1 5816 3 0 1 54

700 8057 3 0 3 7256 2 0 3 7466 1 0 2 7096 2 0 2 7585 3 0 1 7264 3 0 1 73

481 Side

350 6366 3 0 3 5734 1 0 2 5900 1 0 1 5607 1 0 2 5994 3 0 1 5740 3 0 1 52

530 9229 3 0 3 8312 2 0 3 8553 1 0 2 8128 2 0 2 8689 3 0 1 8321 3 0 2 81

700 11283 3 0 3 10163 2 0 3 10456 2 0 2 9938 2 0 2 10623 3 0 2 10173 3 0 2 107

5K Lumen Data

161 Side

350 2407 1 0 1 2168 1 0 1 2230 1 0 1 2120 1 0 1 2266 1 0 1 2171 2 0 1 19

530 3251 2 0 2 2928 1 0 1 3012 1 0 1 2863 1 0 1 3061 2 0 1 2931 2 0 1 27

700 4091 2 0 2 3684 1 0 2 3791 1 0 1 3603 1 0 1 3852 2 0 1 3688 2 0 1 37

1000 6151 2 0 2 5540 1 0 2 5700 1 0 1 5417 1 0 1 5791 2 0 1 5545 2 0 1 58

321 Side

350 4740 2 0 2 4269 1 0 2 4393 1 0 1 4175 1 0 1 4463 2 0 1 4274 3 0 1 36

530 6719 3 0 3 6116 2 0 2 6293 1 0 1 5981 1 0 2 6393 3 0 1 6122 3 0 1 54

700 8481 3 0 3 7639 2 0 3 7859 1 0 2 7470 2 0 2 7985 3 0 1 7647 3 0 2 73

481 Side

350 6701 3 0 3 6035 2 0 2 6210 1 0 1 5902 1 0 2 6309 3 0 1 6042 3 0 1 52

530 9714 3 0 3 8749 2 0 3 9002 1 0 2 8556 2 0 2 9146 3 0 1 8758 3 0 2 81

700 11877 3 0 3 10698 2 0 3 11007 2 0 2 10460 2 0 3 11182 3 0 2 10708 4 0 2 107

Visit www.visionairelighting.com for up-to-the-minute chart information.

VMS - LED Luminaire

The new V-Sconce Medium LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 32 to 96 LEDs that looks perfect with any of the LED configu-rations; thereby enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 4,500 to 21,000+ lumen package with life expectancy of well over 20 years or 100,000 hours of operation. For general wall mount and pedestrian areas the VMS LED series brings contemporary LED lighting design into the 21st century. Fixture Construction• Cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs.• A wall mounting design that simplifies the installation of the fixture.• Engineered optical assemblies with three distribution patterns. LED Technology• 32 to 96 LEDs• 350, 530 or 700 mA ratings.• 4,500 to 21,000+ lumens package available.• 3000, 4000 or 5000 Kelvin for warm, natural or white light.• Full cutoff optics available in three distribution patterns.• 69,000 to 126,000 hours or more of life for the LEDs Applications• The V-Sconce Medium LED Series is destined to become the standard for which LED lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. From shopping centers to auto dealerships, college campuses; the V Sconce LED series is the transition of LED lighting into tomorrow.



Model Optics Source KelvinMilliamps Mounting Finish OptionsVoltageVMS-1 mA

350(3)

530(5)

700(7)

Bronze(BZ)

Black(BK)

White(WH)

Graphite(GP)

Silver Metallic(SL)

Custom Color(CC)

# of LEDs32

(32LC)

64(64LC)

96(96LC)

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

Button Type Photocell*Specify voltage.

(PC120) (PC208)(PC240) (PC277)

*Not available with (EBPL)

Emergency Battery Pack(EBPL)


(WSC-8)8’ Mounting Height

(WSC-20)9-20’ Mounting Height


0-10 Volt Dimming Driver(DIM)

Up-Light Orientation(UP)

*Not available with motion sensor (MS)

Type II(T2)

Type III(T3)

Type IV(T4)

WallMount(WM)120-277

*Universalvoltage

(UNV)

480(5)

The VMS LED wall mount Series continues the unique contemporary design that is inspired by the VLX area light series. It combines LED performance and advanced LED thermal management technology and provides lighting that is energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate cast aluminum housings.

Easy access for mounting and maintenance.

The LED light assemblies come with 32, 64, or 96 LEDs.

Three optical distribution pattern are available. Choose between 3000, 4000 or 5000 Kelvin temperature for the LEDs.


The VMS Series is an exceptional choice for office complexes, schools, commercial buildings, and many architectural projects.


VMS-1 19” 6.5” 14” 96 36

VMS LEDProject Name: Catalog Number: Type

CB

C

A



VMS LED

Heatsink• Cast aluminum heatsink with integral cooling fins for thermal management. Mounting/Driver Compartment•Durable two-piece cast aluminum driver compartment utilizes a quick mount/set screw mounting for ease of maintenance and sealed with a one-piece gasket. Thermal Management• The VMS series provides excellent thermal management by mounting the LEDs to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life. • The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The V Sconce series LEDs have been determined to last 100,000+ hours in 25° C environments when driven at 350 mA. Optical System• The highest lumen output LEDs are utilized in the VMS series. IES distribution Types II, III and IV are available. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution.• CRI values are 70. Quali-Guard® Finish• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.• Finish is guaranteed for five (5) years.

Electrical Assembly• The VMS LED series is supplied with a choice of 350, 530, 700 or 1000 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40°C operations.• 10 kV surge protector supplied as standard.

Warranty• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit visionairelighting.com.

Options• Button Type Photocell • Emergency Battery Pack• Motion Sensor• 0-10 Volt Dimming Driver• Up-Light Orientation

Listings

• The VMS is cUL Listed, suitable for wet locations.

• Powder Coated Tough• IP-65 Rated

VMS LUMEN DATA Lum

# LEDs mA Type 2 Type 3 Type 4 Watts

32 350 4557 4777 4612 36

530 6417 6728 6496 55

700 8122 8515 8221 74

64 350 8277 8677 8378 71

530 11714 12281 11857 109

700 14873 15592 15054 145

96 350 12115 12701 12262 102

530 17377 18218 17589 163

700 20719 21722 20972 214

Visit www.visionairelighting.com for up-to-the-minute chart information, including types not listed here. *For 4000K multiply values by 0.95 *For 3000K multiply values by 0.90

PRELIMINARY

IP65RATED

VSC - LED Luminaire

The new V-Sconce LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 16 to 48 LEDs that looks perfect with any of the LED configurations; there-by enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 2,00 to 11,000+ lumen package with life expectancy of well over 20 years or 100,000 hours of operation. For general wall mount and pedestrian areas the V-Sconce LED series brings contemporary LED lighting design into the 21st century. Fixture Construction • Cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs for extreme long life of the LEDs.• A wall mounting design that simplifies the installation of the fixture.• Engineered optical assemblies with three distribution patterns. LED Technology• 16 to 48 LEDs• 350, 530, 700 or 1000 mA ratings.• 2,000 to 11,000+ lumens package available.• 3000, 4000 or 5000 Kelvin for warm, natural or white light.• Full cutoff optics available in three distribution patterns.• 69,000 to 126,000 hours or more of life for the LEDs Applications• The V-Sconce LED Series is destined to become the standard for which LED lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. From shopping centers to auto dealerships, college campuses; the V-Sconce LED series is the transition of LED lighting into tomorrow.



Model Optics Source KelvinMilliamps Mounting Finish OptionsVoltageVSC-1 mA

350(3)

530(5)

700(7)

1000*(10)

Bronze(BZ)

Black(BK)

White(WH)

Graphite(GP)

Silver Metallic(SL)

Custom Color(CC)

# of LEDs16

(16LC)*Not available in

700mA

32(32LC)

48(48LC)

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

Button Type Photocell*Specify voltage.

(PC120) (PC208)(PC240) (PC277)

*Not available with (EBPL)

Emergency Battery Pack*Universal Voltage only

(EBPL)


(WSC-8)8’ Mounting Height




0-10 Volt Dimming Driver(DIM)

Up-Light Orientation(UP)

*Not available with motion sensor (MS)

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type V(T5)

Type V-W(T5W)

*1000mAnot available

for 48LC

WallMount(WM)

Conduit Box(VCB)

120-277*Universal

voltage(UNV)

480(5)

*Not availablein 1Amp

The VSC LED wall mount Series continues the unique contemporary design that is inspired by the VLX area light series. It combines LED performance and advanced LED thermal management technology and provides lighting that is energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate cast aluminum housings.

Easy access for mounting and maintenance.

The LED light assemblies come with 16, 32, or 48 LEDs.

Three optical distribution pattern are available. Choose between 3000, 4000 or 5000 Kelvin temperature for the LEDs.


The VSC Series is an exceptional choice for office complexes, schools, commercial buildings, and many architectural projects.


VSC-1 14” 5” 10.5” 48 20

VSC LEDProject Name: Catalog Number: Type



VSC LED

Heatsink

• Cast aluminum heatsink with integral cooling fins for thermal management.

Mounting/Driver Compartment

•Durable two-piece cast aluminum driver compartment utilizes a quick mount/set screw mounting for ease of maintenance and sealed with a one-piece gasket.

Thermal Management

• The V-Sconce series provides excellent thermal management by mounting the LEDs to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life.

• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The V Sconce series LEDs have been determined to last 100,000+ hours in 25° C environments when driven at 350 mA.

Optical System

• The highest lumen output LEDs are utilized in the V Sconce series. IES distribution Types II, III and IV are available. The optical system qualifies as IES full cutoff to restrict light trespass, glare and light pollution.


Quali-Guard® Finish

• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.


Electrical Assembly

• The V-Sconce LED series is supplied with a choice of 350, 530, 700 or 1000 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40°C operations.

• 10 kV surge protector supplied as standard.

Warranty

• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit visionairelighting.com.

Options

• Button Type Photocell

• Emergency Battery Pack

• Motion Sensor

• 0-10 Volt Dimming Driver

• Up-Light Orientation

Listings

• The V-Sconce is cUL listed, suitable for wet locations.

• IP65 Rated

• Powder Coated Tough

• DLC Listed

IP65RATED


Up-LightMotion Sensor

5K Lumen Data *Chart updated 02.04.16

16 350 2407 1 0 1 2168 1 0 1 2230 1 0 1 2120 1 0 1 2266 1 0 1 2171 2 0 1 19

530 3251 2 0 2 2928 1 0 1 3012 1 0 1 2863 1 0 1 3061 2 0 1 2931 2 0 1 27

1000 6151 2 0 2 5540 1 0 2 5700 1 0 1 5417 1 0 1 5791 2 0 1 5545 2 0 1 58

32 350 4740 2 0 2 4269 1 0 2 4393 1 0 1 4175 1 0 1 4463 2 0 1 4274 3 0 1 36

530 6719 3 0 3 6116 2 0 2 6293 1 0 1 5981 1 0 2 6393 3 0 1 6122 3 0 1 54

700 8481 3 0 3 7639 2 0 3 7859 1 0 2 7470 2 0 2 7985 3 0 1 7647 3 0 2 73

48 350 6701 3 0 3 6035 2 0 2 6210 1 0 1 5902 1 0 2 6309 3 0 1 6042 3 0 1 52

530 9714 3 0 3 8749 2 0 3 9002 1 0 2 8556 2 0 2 9146 3 0 1 8758 3 0 2 81

700 11877 3 0 3 10698 2 0 3 11007 2 0 2 10460 2 0 3 11182 3 0 2 10708 4 0 2 107

Visit www.visionairelighting.com for up-to-the-minute chart information.*For 4000K multiply values by 0.95 *For 3000K multiply values by 0.90

VMF - LED Luminaire

The new VMF LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 32 to 96 LEDs that looks perfect with any of the LED configurations; thereby enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 6,000 to 23,000+ lumen package with life expectancy of well over 100,000 hours of operation. Fixture Construction • Cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs for extreme long life of the LEDs.• Two mounting options for ease of installation.• Engineered optical assemblies with nine distribution patterns. LED Technology• 32 to 96 LEDs• 530, 700 or 1000 mA ratings.• 6,000 to 23,000+ lumen package available.• 3000, 4000 or 5000 Kelvin for warm, natural or white light.• Nine optical distribution patterns available.• 80,000+ hours or more of life for the LEDs Applications• The VMF LED Series is destined to become the standard for which LED lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. For sign lighting, building lighting, and other flood lighting applications, the VMF LED series is the transition of LED lighting into tomorrow.



VMF LED

Model Optics Source Current Voltage Mounting Finish OptionsKnuckle Mount*Slips over 2 3/8” Tenon

with adjustable Incrementsof 10˚(KM)

TrunnionMount(TM)

Bronze(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Silver Metallic(SL)

Custom Color(CC)

Kelvin120-277

*Universalvoltage

(UNV)

480(5)

347(8)

# of LEDs32

(32LC)

64(64LC)

96(96LC)

VMF-1 mA530(5)

700(7)

*1000(10)

*Not availablein 96LC

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

Button Type Photocell*Specify voltage

(PC120) (PC208)(PC240) (PC277)

0-10v Dimming Driver(DIM)

Universal MastArm Plate

(UMAP)

Egg CrateLight Shield

(ECLS)

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type IV-A(T4A)

Type V(T5)

Type V-W(T5W)

Type FM(FM)

Type FN(FN)

The new VMF LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines LED performance and advanced LED thermal management technology and provides outdoor lighting that is both energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate cast aluminum housings. Sturdy Knuckle or Trunnion mount options.

The LED light assemblies come with 32 to 96 LED’s. Nine optical distribution patterns are available. Choose between 3000, 4000 or 5000 Kelvin temperature of the LEDs.


The VMF LED series is an exceptional choice for building lighting, sign lighting, and other flood lighting applications.

Fixture A B C Max. Watts Lbs

VMF-1 5.5” 22 15.5 214 45


B



VMF LED

Housing• Die cast aluminum LED housing with integral cooling fins for thermal management.

Mounting Arm/Driver Compartment•Durable cast aluminum driver compartment opens for easy access to removable driver(s) for ease of maintenance, and cooler driver operation; and are sealed with one-piece silicone gaskets.

Thermal Management• The VMF series provides excellent thermal management by mounting the LED’s to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life.

• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The V-Flood series LED’s have been determined to last 80,000+ hours in 25° C environments when driven at 530 mA.

Optical System• The highest lumen output LEDs are utilized in the VMF series. Nine optical patterns are available.




Electrical Assembly• The VMF series is supplied with a choice of 530, 700 or 1000 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40 oC operations.


Warranty• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com.

Options• Button Type Photocell

• 0-10v Dimming Driver

• UMAP

• Egg Crate Light Shield

Listings• Powder Coated Tough

VMF 4K Lumen Data *Lumen data dubject to change. Chart updated 01.25.16

LEDs mA Type 1 Type 2 Type 3 Type 4 Type 4A Type 5 Type W Type FM Type FN Watts

32 530 6869 6097 6392 6171 6879 6624 6471 6863 6785 55

700 8693 7716 8089 7810 8706 8383 8190 8686 8587 74

1000 12135 10771 11292 10903 12153 11702 11433 12125 11986 115

64 530 12583 11129 11667 11264 12556 12090 11812 12527 12384 109

700 15918 14129 14812 14301 15941 15350 14997 15904 15723 145

1000 20902 18553 19451 18779 20932 20157 19693 20884 20646 228

96 530 18598 16508 17307 16709 18625 17395 17522 18582 18370 163

700 22175 19683 20635 19923 22207 21384 20892 22156 21903 214

VMF 5K Lumen Data

32 530 7230 6417 6728 6496 7240 6972 6812 7224 7141 55

700 9150 8122 8515 8221 9163 8824 8621 9142 9038 74

1000 12774 11338 11887 11477 12792 12318 12035 12763 12617 115

64 530 13197 11714 12281 11857 13216 12726 12434 13186 13035 109

700 16756 14873 15592 15054 16780 16158 15786 16742 16550 145

1000 22002 19529 20474 19768 22034 21217 20729 21983 21732 228

96 530 19578 17377 18218 17589 19606 18879 18445 19561 19337 163

700 23343 20719 21722 20972 23376 22510 21992 23323 23056 214

Visit www.visionairelighting.com for up-to-the-minute chart information, including types not listed here.

PRELIMINARY

VSF

VSF - LED Luminaire

The new V-Flood LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is both energy efficient and aesthetically pleasing. Choose from 16 to 48 LEDs that looks perfect with any of the LED configurations; there-by enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance throughout the entire project. Choose from a 2,100 to 12,000+ lumen package with life expectancy of well over 20 years or 100,000 hours of operation. Fixture Construction • Cast aluminum housing with integrated heat sink for maximum thermal management of the LEDs for extreme long life of the LEDs.• Two mounting options for ease of installation.• Engineered optical assemblies with Nine distribution patterns. LED Technology• 16 to 48 LEDs• 350, 530, 700 or 1000 mA ratings.• 2,000 to 10,000 lumen package available.• 4000 or 5000 Kelvin for natural or white light.• Nine optical distribution patterns.• 60,000 to 100,000 hours or more of life for the LEDs Applications• The V-Flood LED Series is destined to become the standard for which LED lights are measured. Simple flowing lines that house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. For sign lighting, building lighting, and other flood lighting applications, the V-Flood LED series is the transition of LED lighting into tomorrow.



34

VSF LED

Model Optics Source Current Voltage Mounting Finish OptionsKnuckle Mount*Slips over 2 3/8” Tenon

with adjustable Incrementsof 10˚(KM)

AdjustableWall Mount

(AWM)

TrunnionMount(TM)

Bronze(BZ)

Black(BK)

Smooth Black(SBK)

White(WH)

Smooth White(SWH)

Graphite(GP)

Grey(GY)

Silver Metallic(SL)

Custom Color(CC)

Kelvin120-277

*voltageUniversal

(UNV)

480(5)

347(8)

mA350(3)

530(5)

700(7)

# of LEDs16

(16LC)*347/480V

Not Available

32(32LC)*347/480V

Not Availableat 350mA

48(48LC)

VSF-1

Nipple Mount3/4” NPT

(NM)


Button Type Photocell*Specify voltage

(PC120) (PC208)(PC240) (PC277)

*Not available in 48LC at 700mA

*Not availablein Trunnion Mount

Egg CrateLight Shield

(ECLS)

3000K*Warm white

(3K)

4000K*Neutral white

(4K)

5000K*Cool white

(5K)

Type I(T1)

Type II(T2)

Type III(T3)

Type IV(T4)

Type IV-A(T4A)

Type V(T5)

Type V-W(T5W)

Type FM(FM)

Type FN(FN)

The new VSF LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines LED performance and advanced LED thermal management technology and provides outdoor lighting that is both energy efficient and aesthetically pleasing.

The LED’s performance and the driver’s life are maximized by enclosing them in two separate cast aluminum housings. Sturdy Knuckle or Trunnion mount options.

The LED light assemblies come with 16 to 48 LED’s. Nine optical distribution patterns are available. Choose between 3000, 4000 or 5000 Kelvin temperature of the LEDs.


The VSF LED series is an exceptional choice for building lighting, sign lighting, and other flood lighting applications.

A

C

B

Fixture A B C Max. Watts Lbs

VSF-1 23.75” 4.75 10.5 108 40




35

VSF LED

Housing• Die cast aluminum LED housing with integral cooling fins for thermal management.

Mounting Arm/Driver Compartment•Durable cast aluminum driver compartment opens for easy access to removable driver(s) for ease of maintenance, and cooler driver operation; and are sealed with one-piece silicone gaskets.

Thermal Management• The VSF series provides excellent thermal management by mounting the LED’s to the substantial heat sink of the housing. This enables the Luminaire to withstand higher ambient temperatures and driver currents without degrading LED life.

• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The VSF series LED’s have been determined to last 80,000+ hours in 25° C environments when driven at 350 mA.

Optical System• The highest lumen output LEDs are utilized in the V-Flood series. Nine optical patterns are available.

• CRI values are 70 for 4000K and 75 for 5000K.



Electrical Assembly• The VSF LED series is supplied with a choice of 350,530 or 700 mA high-performance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40 oC operations.


Warranty• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit VisionaireLighting.com.

Options

• 0-10v Dimming Driver

• Button Type Photocell

• Egg Crate Light Shield

Listings• The VSF is cUL Listed, suitable for wet locations.

• Powder Coated Tough.

VSF 4K Lumen Data

#LED mA Type 1 Type 2 Type 3 Type 4 Type 4A Type 5 Type 5W FM FN Watts

16 350 2399 2161 2223 2113 2458 2259 2163 2516 2457 18

530 3219 2899 2983 2835 3298 3031 2902 3376 3296 26

700 4249 3827 3937 3742 4353 4000 3831 4457 4350 37

32 350 4712 4244 4367 4150 4828 4436 4248 4942 4825 37

530 6383 5749 5916 5622 6540 6010 5755 6695 6536 54

700 7912 7126 7332 6968 8106 7449 7133 8298 8101 70

48 350 6642 5983 6155 5850 6805 6254 5989 6967 6801 56

530 8610 7755 7979 7583 8821 8106 7763 9031 8816 79

700 11002 9910 10196 9690 11272 10359 9920 11540 11265 108

VSF 5K Lumen Data

16 350 2519 2269 2334 2219 2581 2372 2271 2642 2579 18

530 3380 3044 3132 2977 3463 3182 3047 3545 3461 26

700 4461 4018 4134 3929 4571 4200 4022 4679 4568 37

32 350 4948 4456 4585 4358 5069 4658 4461 5190 5066 37

530 6702 6037 6211 5903 6867 6310 6043 7030 6863 54

700 8307 7482 7698 7316 8511 7821 7490 8713 8506 70

48 350 6974 6282 6463 6142 7146 6566 6288 7315 7141 56

530 9040 8143 8378 7962 9262 8512 8151 9482 9257 79

700 11552 10405 10706 10175 11836 10877 10416 12117 11829 108

Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.

Documents

07.05 - usesi.com · Dimensional Drawings For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures,