Upload
saiwawa
View
33
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Menjelaskan tatacara pengujian sumur minyak
Citation preview
By
R. Harry EddyarsoPT. SARIPARI PERTIWI ABADI
KMI Goes to Campus ProgramKomunitas Migas Indonesia Universitas Trisakti
25 November 2006
WE DO APPRECIATE HALLIBURTON AND POWER WELL SERVICE GROUPS FOR PROVIDING THE WELL TESTING PRESENTATION MATERIALS FOR LESSON LEARNED SHARING AND EDUCATIONAL PURPOSES .
STATEMENT of APPRECIATION
Finding The Reservoir : Seismic Survey
Making Access to The Reservoir : Drilling
Optimizing The Reservoir : Testing
Evaluating The Reservoir : Logging
Producing The Reservoir : Completion
SEISMIC ALONG WELL PATH3D DATA
Depth Structure Map
Top B-29A2 Base B-29A2
c.i =25
Types Of Well Testing Equipment
DST(Drill Stem Testing)
DST
Open Hole Cased Hole Barefoot
STE (Surface Testing Eqpt.)
STE
Exploration Clean Ups Production
Guide to Better Service and Correct Sizing of Equipment
Guide to Better Service and Correct Sizing of Equipment
1. What is the estimated highest pressure atthe wellhead ?.
2. What is the lowest pressure at wellhead ?.3. What are the expected maximum and
minimum effluent rates ?. Gas/Oil/Water ?.4. Is the effluent sweet or does it contain
corrosives ?. If it does contain corrosives,what are the expected highest concentrations of H2S (This will also include CO2 amounts).
Guide to Better Service and Correct Sizing of Equipment (Continued)
Guide to Better Service and Correct Sizing of Equipment (Continued)
5. What is the expected A.P.I. of liquid hydrocarbon and the specific gravity of gas ?.
6. What is the customers requirement for disposal or storing of liquid hydrocarbon and H2O ?.
7. Are there any special requirements such as governing bodies special rules or regulations, i.e., maximum weight restrictions, etc. ?.
DRILL STEM TESTING
Definition
Temporary completion of a well to gather reservoir data and information for evaluation.
Measurement of formation parameters and characteristics are under dynamic conditions. Disturbance (flow) of the formation is measured (Pressure transient).
Objectives Identify the formation
fluid Determine the rate at
which fluids can be produced
Determine reservoir parameters(Productivity, Permeability, Well Bore Damage, etc )
Calculating the Economic Feasibility of the Well
DRILL STEM TESTING
SECONDARY CIRCULATING VLV.
DRILL COLLARS
PRIMARY CIRCULATING VLV.
TESTER VLV.
WORK STRING
PRESSURE / TEMPERATURE RECORDERSPACKER BYPASS
PACKER
DRILL COLLARS
DRILL STEM TESTING
PACKER
Will safely separate well in two sections.
Will protect formation
Allow flowing the well inside Tubing while Isolating the Annulus
PACKER
Will safely separate well in two sections.
Will protect formation
Allow flowing the well inside Tubing while Isolating the Annulus
PACKER By Pass
Will divert mud while tripping in and out of the hole.
Will protect Packer elements during circulation.
Allow equalization of differential pressure when unsetting packer
PACKER By Pass
Will divert mud while tripping in and out of the hole.
Will protect Packer elements during circulation.
Allow equalization of differential pressure when unsetting packer
Pressure Temperature Recorders
Will record pressure transient
Must be carried safely and must be protected.
Location in the string can vary.
Multiple options exists
Pressure Temperature Recorders
Will record pressure transient
Must be carried safely and must be protected.
Location in the string can vary.
Multiple options exists
SECONDARY CIRCULATING VALVE
DRILL COLLARS
PRIMARY CIRCULATING VALVE
TESTER VALVE
WORK STRING
Pressure / Temperature Recorders and Carriers
Packer Bypass
Packer
DRILL COLLARS
DRILL STEM TESTING
Tester Valve
Will provide DOWN HOLE closure.
Will add a safety barrier. Allow pressure control inside the string.
Various types, some allow to Lock Open and can be reversed to Normal Mode.
Tester Valve
Will provide DOWN HOLE closure.
Will add a safety barrier. Allow pressure control inside the string.
Various types, some allow to Lock Open and can be reversed to Normal Mode.
Drill Collars
Will provide a SAFE separation between Ball Valves.
Will add weight to packer protecting the Tubing.
Drill Collars
Will provide a SAFE separation between Ball Valves.
Will add weight to packer protecting the Tubing.
Primary Circulating Valve
Will provide a mean to circulate without unsetting the packer. (Before and/or after the DST, and with NO manipulation of the Tubing)
Will be re-closable.
Can isolate formation during circulation, adding safety to the operation.
Primary Circulating Valve
Will provide a mean to circulate without unsetting the packer. (Before and/or after the DST, and with NO manipulation of the Tubing)
Will be re-closable.
Can isolate formation during circulation, adding safety to the operation.
SECONDARY CIRCULATING VALVE
Drill Collars
Primary Circulating Valve
Tester Valve
WORK STRING
Pressure / Temperature Recorders and Carriers
Packer Bypass
Packer
Drill Collars
DRILL STEM TESTING
Secondary Circulating Valve
To provide a mean to circulate if the primary circulating valve fails. (Before or after the DST, and with NO manipulation of the Tubing)
Could be re-closable, or a one shot.
Can isolate formation during circulation, adding safety to the operation.
Secondary Circulating Valve
To provide a mean to circulate if the primary circulating valve fails. (Before or after the DST, and with NO manipulation of the Tubing)
Could be re-closable, or a one shot.
Can isolate formation during circulation, adding safety to the operation.
Work String
To provide a conduct for the hydrocarbons to surface.
To have a mean to operate mechanical tools, such as Packers or other valves.
Typically in Cased Hole DST Tubing will be used. In Open Hole DST Drill Pipe will be used.
Work String
To provide a conduct for the hydrocarbons to surface.
To have a mean to operate mechanical tools, such as Packers or other valves.
Typically in Cased Hole DST Tubing will be used. In Open Hole DST Drill Pipe will be used.
TOOL SYSTEM APPLICATIONS OPEN HOLE CASED HOLE
DRILL STEM TESTING
TYPICAL OPEN HOLE DRILL STEM
TESTING SYSTEM
IMPACT SUB REV. CIRC. VLV.
DRILL PIPE
DRILL COLLARS
DUAL CIP VALVE
HYDROSPRING TESTER VLV.
PRESSURE RECORDER
VR SAFETY JOINT
ANCHOR PIPE SAFETY JT.
TEMPERATURE RECORDER
NR PACKER
BIG JOHN JAR
FLUSH JOINT ANCHOR
PRESSURE RECORDER
TYPICAL CASED HOLE DRILL STEM
TESTING SYSTEM
RD SAFETY CIRCULATING VLV.
PREMIUM THREADED TUBING
DRILL COLLARSEXPRESS CIRCULATING VLV.
SURFACE READOUT SYSTEMSELECT TESTER VLV.MPV VALVE
PRESSURE / TEMPERATURE REC.
CHAMP IV PACKER
VERTICAL SHOCK ABSORBERTIME DELAY FIRING HEAD
R/A TAG SUB
BIG JOHN JARRTTS SAFETY JOINT
WORK STRING
RADIAL SHOCK ABSORBER
VANN GUNS
BELOW PKR. HYD. SAFETY JOINT
Surface Well Test Package
Surface Test Tree
Data Header
Choke Manifold
Steam Heat Exchanger
Indirect Fired Heater
Separator
Test Tank
Transfer Pump
Burner Boom
Burner Head
Air Inlet
Oil Inlet
Igniter Connections
Nozzle
GasJets
Pilot
Chemical Injection Pump
Well Test Lab
Air Compressor
SCAN (Surface Computerized Acquisition Network)
PowerWell Services SCAN combines the most up-to date electronic hardwareand data gathering software for unbeatable performance during well testoperations.
Present equipment consists of Computer and peripherals connected totransducers and transmitters measuring pressure, temperature, and flow rates.
Data Acquisition
01000
2000
3000
4000
5000
6000
7000
8000
9000
10000
11000
12000
13000
14000
15000
16000
1
0
/
2
7
1
2
:
0
0
:
0
0
1
0
/
2
8
0
0
:
0
0
:
0
0
1
0
/
2
8
1
2
:
0
0
:
0
0
1
0
/
2
9
0
0
:
0
0
:
0
0
1
0
/
2
9
1
2
:
0
0
:
0
0
1
0
/
3
0
0
0
:
0
0
:
0
0
1
0
/
3
0
1
2
:
0
0
:
0
0
1
0
/
3
1
0
0
:
0
0
:
0
0
1
0
/
3
1
1
2
:
0
0
:
0
0
1
1
/
0
1
0
0
:
0
0
:
0
0
1
1
/
0
1
1
2
:
0
0
:
0
0
1
1
/
0
2
0
0
:
0
0
:
0
0
1
1
/
0
2
1
2
:
0
0
:
0
0
1
1
/
0
3
0
0
:
0
0
:
0
0
1
1
/
0
3
1
2
:
0
0
:
0
0
1
1
/
0
4
0
0
:
0
0
:
0
0
1
1
/
0
4
1
2
:
0
0
:
0
0
1
1
/
0
5
0
0
:
0
0
:
0
0
1
1
/
0
5
1
2
:
0
0
:
0
0
1
1
/
0
6
0
0
:
0
0
:
0
0
P
r
e
s
s
u
r
e
(
p
s
i
)
Time (mm/dd hh:mm:ss)
60
80
100
120
140
160
180
200
220
240
260
Temperature (F)
Pressure Inflection Point Temperature
Pressure up tubing to fire the guns
Shut in at the choke manifold and cycle the OMNI to spot diesel to lower the hydrostatic head
Pre-stimulation flow period for formation cleanup.
Acidising the formation by bullheading from surface
Post-Stimulation flowback and cleanup
Steady flow on a small choke
Pressure buildup
Second flow period for sample catching
Pressure & Temperature History Plot for Marrat Object II
Reporting FormatsThe Software Gives The Operator The Ability To Create Custom Report Formats
And Save Them For Later Use
Emergency Shutdown System The Emergency Shutdown (ESD) system consists of a panel which maintains 1500 psig hydraulic pressure via
a flexible high pressure hose to the Surface Safety Valve or Surface Test Tree flow wing valve. The hydraulic pressure holds the valve open. In the ESD mode this hydraulic pressure can only be maintained provided the control valve inside the panel is held closed by a pilot air supply of approximately 40 psig.
This 40 psig pilot air line is fed via " plastic hose to Hi/Lo pressure pilots and ESD push button stations situated around the installation:
Upstream of the choke manifold providing overpressure and line rupture protection for the high pressure pipework.
Downstream of the choke manifold providing overpressure and line rupture protection for the low pressure pipework.
On the holding tank providing overpressure protection of the vessel. On the Heat Exchanger shell providing overpressure protection of the shell if the coils rupture. On the low pressure coils of the heat exchanger, providing overpressure protection in the event of a blockage
downstream. On the high pressure coils of the heat exchanger, providing overpressure protection in the event of a blockage
upstream. Push buttons situated : a) In driller dog house, b) Outside Company office, c) At escape lifeboats, d) In the
welltest area, e) On the ESD panel
Should any of the Hi/Lo pilots detect over/under pressure during the flow period the pilot air pressure would be vented, causing the panel control valve to dump the hydraulic pressure that holds the actuator valve open. The spring inside the actuator closes the actuator valve.
Should any of the ESD buttons be activated, again the pilot air supply would be dumped and the same sequence of events would occur.
A manual override is incorporated in the panel and isolation valves are installed at the Hi/Lo pilots to allow for pressure testing of the system.
Emergency Shutdown System
Fusible Plug
S.T.T. Manifold Optional Remote
E.S.D. Station
Pneumatic
Hydraulic
Hydraulic Return
Hydraulic Quick Exhaust
Fusible Plug
DS Pilot DS Pilot DS Pilot DS Pilot
HydraulicActuator
Choke Manifold
Heat Exchanger Separator Test Tank Pump Burner
SEISMIC ALONG WELL PATHTypes Of Well Testing EquipmentGuide to Better Service and Correct Sizing of EquipmentGuide to Better Service and Correct Sizing of Equipment (Continued)DRILL STEM TESTINGDRILL STEM TESTINGTYPICAL OPEN HOLE DRILL STEM TESTING SYSTEMTYPICAL CASED HOLE DRILL STEM TESTING SYSTEMSurface Well Test PackageSurface Test TreeData HeaderChoke ManifoldSteam Heat ExchangerIndirect Fired HeaterSeparatorTest TankTransfer PumpBurner BoomBurner HeadChemical Injection PumpWell Test LabAir CompressorData AcquisitionReporting Formats The Software Gives The Operator The Ability To Create Custom Report Formats And Save Them For Later UseEmergency Shutdown SystemEmergency Shutdown System